Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Compression Algorithms”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83Linked to original sources

Biomechanical modelling of segmental instrumentation for surgical correction of 3D spinal deformities using Euler-Bernoulli thin-beam elastic deformation equations.

A simplified computer-modelling technique intended to analyse 3D spinal deformity correction with segmental instrumentation is presented. The spine was modelled as a thin beam-composed structure linked by implants to two deformable rods. The Landau vector representation of Euler-Bernoulli beam elastic deformation equations was used to formulate the simulation approach. All types of essential deformation (bending, torsion, tension, compression) were considered. An iterative numerical method was proposed to obtain an appropriate load, able to deform the spine axial curve to the desired post-operative shape. A simulation based on the spine of a real scoliotic patient (thoracic and lumbar Cobb angles: 39 degrees and 8 degrees), corrected using surgical instrumentation intervention, is presented. Force loads within the range of 20-350 N were able to deform the pre-operational spine axial curve to the post-operational one with a root mean square approximation error of 3.7 mm. Similarly good corrections were obtained using different force patterns. This highlights the uncertainty of which corresponding surgical instrumentation to use. Such uncertainty is related to the 'ill-posed problems' property of mechanical systems.

Algorithms↗

The frictional coefficient of the temporomandibular joint and its dependency on the magnitude and duration of joint loading.

In synovial joints, friction between articular surfaces leads to shear stress within the cartilaginous tissue, which might result in tissue rupture and failure. Joint friction depends on synovial lubrication of the articular surfaces, which can be altered due to compressive loading. Therefore, we hypothesized that the frictional coefficient of the temporomandibular joint (TMJ) is affected by the magnitude and duration of loading. We tested this by measuring the frictional coefficient in 20 intact porcine TMJs using a pendulum-type friction tester. The mean frictional coefficient was 0.0145 (SD 0.0027) after a constant loading of 50 N during 5 sec. The frictional coefficient increased with the length of the preceding loading duration and exceeded 0.0220 (SD 0.0014) after 1 hr. Application of larger loading (80 N) resulted in significantly larger frictional coefficients. In conclusion, the frictional coefficient in the TMJ was proportional to the magnitude and duration of joint loading.

Algorithms↗

Redox-induced surface stress of polypyrrole-based actuators.

We measure the surface stress induced by electrochemical transformations of a thin conducting polymer film. One side of a micromechanical cantilever-based sensor is covered with an electropolymerized dodecyl benzenesulfonate-doped polypyrrole (PPyDBS) film. The microcantilever serves as both the working electrode (in a conventional three-electrode cell configuration) and as the mechanical transducer for simultaneous, in situ, and real-time measurements of the current and interfacial stress changes. A compressive change in surface stress of about -2 N/m is observed when the conducting polymer is electrochemically switched between its oxidized (PPy+) and neutral (PPy0) state by cyclic voltammetry. The surface stress sensor's response during the anomalous first reductive scan is examined. The effect of long-term cycling on the mechanical transformation ability of PPy(DBS) films in both surfactant and halide-based electrolytes is also discussed. We have identified two main competing origins of surface stress acting on the PPy(DBS)/ gold-coated microcantilever: one purely mechanical due to the volume change of the conducting polymer, and a second charge-induced, owing to the interaction of anions of the supporting electrolyte with the gold surface.

Algorithms↗

Force controlled and teleoperated endoscopic grasper for minimally invasive surgery--experimental performance evaluation.

Minimally invasive surgery generates new user interfaces which create visual and haptic distortion when compared to traditional surgery. In order to regain the tactile and kinesthetic information that is lost, a computerized force feedback endoscopic surgical grasper (FREG) was developed with computer control and a haptic user interface. The system uses standard unmodified grasper shafts and tips. The FREG can control grasping forces either by surgeon teleoperation control, or under software control. The FREG performance was evaluated using an automated palpation function (programmed series of compressions) in which the grasper measures mechanical properties of the grasped materials. The material parameters obtained from measurements showed the ability of the FREG to discriminate between different types of normal soft tissues (small bowel, lung, spleen, liver, colon, and stomach) and different kinds of artificial soft tissue replication materials (latex/silicone) for simulation purposes. In addition, subjective tests of ranking stiffness of silicone materials using the FREG teleoperation mode showed significant improvement in the performance compared to the standard endoscopic grasper. Moreover, the FREG performance was closer to the performance of the human hand than the standard endoscopic grasper. The FREG as a tool incorporating the force feedback teleoperation technology may provide the basis for application in telesurgery, clinical endoscopic surgery, surgical training, and research.

Algorithms↗

Predicting risk of decompression sickness in humans from outcomes in sheep.

In animals, the response to decompression scales as a power of species body mass. Consequently, decompression sickness (DCS) risk in humans should be well predicted from an animal model with a body mass comparable to humans. No-stop decompression outcomes in compressed air and nitrogen-oxygen dives with sheep (n = 394 dives, 14.5% DCS) and humans (n = 463 dives, 4.5% DCS) were used with linear-exponential, probabilistic modeling to test this hypothesis. Scaling the response parameters of this model between species (without accounting for body mass), while estimating tissue-compartment kinetic parameters from combined human and sheep data, predicts combined risk better, based on log likelihood, than do separate sheep and human models, a combined model without scaling, and a kinetic-scaled model. These findings provide a practical tool for estimating DCS risk in humans from outcomes in sheep, especially in decompression profiles too risky to test with humans. This model supports the hypothesis that species of similar body mass have similar DCS risk.

Algorithms↗

Trends in future urodynamics: computer support-data base-digitized imaging.

The use of computers in urodynamics must be based preferably on the structure of the urodynamic investigation itself. This enables implementation of computerized systems in the urodynamic laboratory in the most natural way and provides transparency of urodynamic software for the investigators. Additionally, the algorithms of the urodynamic software then can provide for a urodynamic investigation following a logical path based on the patient's history and clinical data and (automatically interpreted) results from earlier steps in the urodynamics. As an extension of this structured logical reasoning, the computer use in urodynamics can be extended to include validation and decision rules, comprising measurement data and rules for interpretation and combination of history, clinical and measurement data. Conclusions will be presented then in the form of a preliminary differential diagnosis, including the odds for each of the possible diagnoses. These kinds of computerized interpretation systems will be validated by comparison with the classical clinical diagnoses and are generally known as expert systems. These systems rely on logical branching-as opposed to systems that are statistical in nature and use large data bases to classify individual data into known groups. Data bases will remain for the purpose of documentation, based on individual patients and comprising all patient data-comparable to the existing patient files in the hospital's archives. The computer files have to include also the original data from functional studies like urodynamics-and not just the abstracted conclusions-and from imaging techniques. Intelligent compression of data prevents the data bases from exploding. Digital imaging techniques combined with computerized urodynamic investigations open possibilities for dynamic analysis of morphologic data and combination thereof with urodynamic measurement data.

Databases, Factual↗

[The texture-analysis of high-resolution computed tomograms as an additional procedure in osteoporosis diagnosis: in-vitro studies on vertebral segments].

PURPOSE: The purpose of this study was to perform texture analysis of high-resolution CT images obtained from human vertebral specimens and to correlate these parameters with the biomechanical stability of the specimens. In addition, structure data were compared with bone mineral density (BMD) assessed by quantitative CT (QCT). MATERIAL AND METHODS: High-resolution CT images and standard QCT sections were obtained in 36 vertebral motion segments, each consisting of two vertebrae with intact ligaments and intervertebral disc. The trabecular structure in the CT images was assessed using three texture analysis techniques: Trabecular threshold area ratio (TTAR), fractal dimension without thresholding (OTS) and fractal dimension with thresholding (ITS). Finally, the maximum compressive strength (MCS) was determined using a biomechanical testing device. RESULTS: A correlation of r = 0.76 (p < 0.01) was obtained for TTAR versus MCS, of r = 0.83 (p < 0.01) for ITS versus MCS, and of r = 0.35 (p > 0.01) for OTS versus MCS, while r = 0.76 (p < 0.01) was found for BMD versus MCS. Best results were obtained by combining structure measures and BMD (r = 0.85, p < 0.01). CONCLUSIONS: This in vitro study showed a significant correlation between structure measures and biomechanical strength, which was comparable to BMD and strength. However, best correlations were obtained by combining both measures. Using both BMD and structure measures therefore may improve the prediction of biomechanically determined bone strength.

Aged↗

Trends in program project grant funding at the National Cancer Institute.

In summary, analysis of the P01 program indicates that differences exist in scores and funding requirements between purely basic and translational P01s; P01 funding has been stable and the P01 policies consistent; growth in average costs for P01s has lagged compared to R01s; P01 grantees have a higher success rate than R01 grantees; priority score compression reduces the P01 payline without reducing the number of grants funded; exception funding in P01s expands the number of grants awarded and helps to meet the scientific program needs of the NCI; almost all R01 and P01 applications in the first quartile are funded; comparably ranked R01s and P01s are funded at equivalent percentages of recommended funding levels; the percentage of approved funds awarded declines as scores for R01s and P01s become less favorable. Because the resources available are finite, the NCI carefully considers the competing demands for RPG funds. On balance, however, the P01 program is still in good health. In combination with the other methods we use to make RPG awards, the P01 program is a vital component of our research grant program. Faced with budget realities, however, some difficult decisions have to be made. The NCI is open to suggestions on how to distribute research funds to best promote cancer research throughout the country. The NCI is particularly interested in hearing researchers' perceptions of problems so that, whenever it is appropriate, we can modify our course. There are important questions to consider for the future. Should there be greater or lesser use of RFAs in allocating resources for P01 grants? What algorithm optimally distributes resources among R01s, P01s, and other funding instruments in the RPGs? Should exceptions be used more or less heavily in the P01 funding process? Should other grant programs outside the RPG budget, such as the P50 SPORE program, be used to relieve pressures on the P01 budget? Should the number of projects within P01s be limited? How can peer review groups be given opportunities to provide priority scores that better reflect distinguishable differences in highly meritorious P01s? Should P01 scores be normalized? How could the R01 percentile concept be applied to P01s? How can the results from standing study sections be synchronized with results from ad hoc review groups? What changes in peer review procedures would promote equitable score distributions and budget recommendations across years? How can the NCI provide stability for established P01s without impinging on the ability of new P01s to enter the system?(ABSTRACT TRUNCATED AT 400 WORDS)

Financing, Government↗

Indexes to the reassociation and stability of solution DNA hybrids.

The computation, assumptions, and properties of DNA-hybrid stability and reassociation indexes were reviewed. Different methods of computing the same index typically yielded similar values. However, because dissociation curves change from asymmetric to symmetric as increasingly divergent DNAs are compared, adequate determination of mode required fitting a complex function. Delta Tm, delta mode, and delta T50H correlated well up to ca. 12, and all were found to be useful indexes of genomic similarity in that range. They also exhibited similar levels of error, even though T50H comprises a percent reassociation component with relatively large variance. At greater distances, the delta Tm scale became markedly compressed because of the boundary imposed by the temperature of hybrid formation (incubation temperature). Though not compressed or technically limited by it, delta mode and delta T50H could not be extrapolated with certainty below the incubation temperature. Among theoretical problems discussed: Tm and mode index an increasingly small percentage of the genome as the extent of reassociation decreases, and they may compare different genomic segments as DNAs become highly diverged. T50H relies upon the assumptions that all sequences evolve at a constant rate and that reassociation behavior is the same among all sequences regardless of their extent of divergence. Tm and T50H may be biased by self-hybridization of repetitive elements or cross-hybridization of paralogous sequences. Delta mode is free of such biases as long as the genomes under comparison are not too diverged. No index was found to be best in all circumstances.

Algorithms↗

Effects of smooth muscle activation on axial mechanical properties of excised canine bronchi.

This study tested the hypothesis that airway smooth muscle (ASM) activation produces an airway active axial force (AAAF). Bronchi (n = 10) immersed in a tissue bath containing 95% O2-5% CO2-equilibrated Krebs solution were subjected to passive axial lengthening and shortening at 0-20 cmH2O of transmural pressure. ASM was relaxed with isoproterenol and activated with methacholine. Axial tensile (epsilonx), transverse compressive (epsilony), and shear strains (epsilonxy) were computed from the displacements of four markers placed onto the specimen's surface. The AAAF was estimated by subtracting the control axial force (AF) values at a given epsilonx from those obtained after methacholine. epsilonx-AF relationships were curvilinear, with maximum epsilonx being approached at approximately 15 g of AF. The epsilony decreased during bronchial lengthening. Cholinergic stimulation produced 1) a decrease of both epsilonx and epsilony at a given AF relative to control, indicating ASM shortening, and 2) an AAAF that increased with increasing epsilonx and transmural pressure. A portion of the work of expanding the lungs is required to lengthen the airways; therefore, an AAAF would increase lung elastance and recoil.

Adrenergic beta-Agonists↗

[Neonatal resuscitation].

At birth approximately 10 % of term or near-term neonates require initial stabilization maneuvers to establish a cry or regular breathing, maintain a heart rate greater than 100 beats per minute (bpm), and good color and muscular tone. About 1 % requires ventilation and very few infants receive chest compressions or medication. However, birth asphyxia is a worldwide problem and can lead to death or serious sequelae. Recently, the European Resuscitation Council (ERC) and the International Liaison Committee on Resuscitation (ILCOR) published new guidelines on resuscitation at birth. These guidelines review specific questions such as the use of air or 100 % oxygen in the delivery room, dose and routes of adrenaline delivery, the peripartum management of meconium-stained amniotic fluid, and temperature control. Assisted ventilation in preterm infants is briefly described. New devices to improve the care of newborn infants, such as the laryngeal mask airway or CO2 detectors to confirm tracheal tube placement, are also discussed. Significant changes have occurred in some practices and are included in this document.

Algorithms↗

Common peripartum emergencies.

Peripartum emergencies occur in patients with no known risk factors. When the well-being of the fetus is in question, the fetal heart rate pattern may offer etiologic clues. Repetitive late decelerations may signify uteroplacental insufficiency, and a sinusoidal pattern may indicate severe fetal distress. Repetitive variable decelerations suggesting umbilical cord compression may be relieved by amnioinfusion. Regardless of the etiology of the nonreassuring fetal heart pattern, measures to improve fetal oxygenation should be attempted while options for delivery are considered. Massive obstetric hemorrhage requires prompt action. Clinical signs, such as painless bleeding, uterine tenderness and nonreassuring fetal heart patterns, may help to differentiate causes of vaginal bleeding that may or may not require emergency cesarean delivery. The causes of postpartum hemorrhage include uterine atony, vaginal or cervical laceration, and retained placenta. The challenge of managing shoulder dystocia is to effect a rapid delivery while avoiding neonatal and maternal morbidity. The McRoberts maneuver has been shown to be the safest and most successful technique for relieving shoulder dystocia. Eclampsia responds best to magnesium sulfate, supportive care and supplemental hydralazine or labetalol as needed for severe hypertension.

Algorithms↗

Influence of adjuvants on the dissolution profile of tablets containing high doses of spray-dried extract of Maytenus ilicifolia.

A 2(3) factorial design was used in order to evaluate the influence of some adjuvants on the dissolution profile of tablets containing high doses of Maytenus ilicifolia spray-dried extract. Tablets were prepared on a single punch tablet press using 15 mm flat punches by individual direct compression of 650 mg from each formulation containing 375 mg of the spray-dried extract. The factors investigated were disintegrant (croscarmellose sodium or sodium starch glycolate), lubricant (colloidal silicon dioxide or magnesium stearate) and filler/binder (microcrystalline cellulose or lactose). The dissolution profiles were analyzed to determine the dissolution kinetics, the dissolution half-lives (t50%), the similarity factor (f2) and the dissolution efficiency (DE %), which was selected as the response criteria to evaluate the factorial design. The results revealed that in spite of the high content of spray-dried powder in the tablets, the dissolution profiles of the extract did depend on the adjuvant used. The filler/binder had the most important effect on the dissolution efficiency of the tablets.

Adjuvants, Pharmaceutic↗

Data acquisition in PET imaging.

Data acquisition is substantially different in PET than it is in planar nuclear medicine and SPECT. There is an entirely different set of definitions and considerations. The objective of this paper is to provide the reader with the terminology and understanding of how PET data are acquired and organized as well as the issues involved in choosing one approach over another. Sinograms and projection views will be presented as methods of storing and viewing raw PET data. Different approaches to increase axial sampling while maintaining a sufficient number of counts for each reconstructed slice are discussed, as well as the use of sinogram compression or "mashing" to reduce the storage requirements of raw PET data. The differences between 2-dimensional (2D) and 3-dimensional (3D) PET and how storage of raw 3D data may differ from that of 2D data are described. The concept of "Michelograms" as a means of displaying the nature of the axial sampling in both 2D and 3D PET is discussed. After reading this paper, the reader will be able to describe 2 methods used to store and display raw PET data and compare them with methods used in SPECT. The reader will be able to define the terms "span" and "maximum ring difference" and describe how they relate to the axial sampling in 2D and 3D PET. The reader will also be able to list 3 ways in which 3D PET differs from 2D PET.

Algorithms↗

Monitoring the formation of thermal lesions with heat-induced echo-strain imaging: a feasibility study.

We investigated the feasibility of using echo-strain images to visualize the extent of high-intensity ultrasound (US)-induced thermal lesions during their formation. Echo-strain, defined as the relative deformation of the backscattered ultrasonic signal, is due to tissue expansion and to changes in the speed of sound during heating. First, a theoretical framework was developed to predict the influence of these effects on the echo signal. Then, a simulation tool was developed to create simulated echo-strain images in thermal lesions. Finally, experimental echo-strain images were acquired in 10 porcine liver samples in vitro for various exposure durations and ultrasonic intensities (resulting in lesions that extended 3 to 8 mm deep from the surface). For this purpose, radiofrequency (RF) frames were acquired at 8 frames per s while heating. For each consecutive pair of RF frames, an echo-strain image was calculated using standard elastographic processing. The echo-strain images were cumulated and displayed. The experimental echo-strain images were compared with gross pathology. The (isoechoic) lesions were visible both in simulated and in experimental cumulated echo-strain images as apparent expansion areas (tensile echo-strain), whereas surrounding tissues exhibited apparent compression. The tensile echo-strain area underestimated the lesion in simulations, but was representative of the lesion in experiments. High correspondence was found between the lesion depth measured from experimental cumulative echo-strain images (y) and from gross pathology (x) (Pearson's correlation = 0.90, linear regression y = x-0.1 mm, residual error = 0 +/- 0.9 mm). We hypothesized that significant tissue expansion made the thermal lesions highly visible in the experimental echo-strain images. In two cases, the ultrasonic intensity was too low to induce a lesion, and the corresponding experimental echo-strain images showed no visible lesion. We conclude that cumulative echo-strain images have the potential to monitor the formation of high-intensity US-induced thermal lesions.

Algorithms↗

Principal component analysis of lifting waveforms.

BACKGROUND: One limiting factor in lifting research design has been the inability to effectively analyze waveform data, especially when differences in body mass, height, and load magnitude influence the derived kinetic variables. The purpose of this study was to demonstrate the sensitivity of principal component analysis to quantify clinically relevant differences in kinetic lifting waveforms over three load magnitudes and between two separate populations. METHODS: Principal component analysis was applied to five kinetic lifting waveforms. The derived principal component scores were used as the dependent measures in a two-way (clinical status x load magnitude) MANOVA. FINDINGS: Significant low back pain group differences (P<0.05) were found for three of the principal component scores on extension moment generation in the sacral and thoracic regions and for trunk compression. Significant differences were found for each variable with respect to the magnitude across the entire lift time between the three load conditions, as well as four significant differences related to inferred mechanical changes that resulted from lifting increasingly heavier loads. INTERPRETATION: Principal component analysis of kinetic lifting waveforms was shown to be insensitive to a confounding factor of different load magnitudes when attempting to identify previously determined clinically relevant differences in the waveform trajectories. The analysis was able to partition the variability attributed to the direct influence of different external load magnitudes, versus those differences in spinal loading that arose from the variations in the lifting mechanics of increasing loads. The technique could be beneficial for other kinetic analyses where confounding magnitude modifiers like body size are present.

Adult↗

The role of angiography in the management of haemorrhage from major fractures of the pelvis.

In a series of 150 consecutive patients with unstable fractures of the pelvis, angiography was performed in 23 (15%) who had uncontrolled hypotension. There were three anteroposterior compression (APC), eight lateral compression (LC) and 12 vertical shear (VS) injuries. Arterial sources of haemorrhage were identified in 18 (78%) patients and embolisation was performed. Angiography was required in 28% of VS injuries. The morphology of the fracture was not a reliable guide to the associated vascular injury. Ten (43%) patients died, of whom six had had angiography as the first therapeutic intervention. Five of these had a fracture which was associated with an increase in pelvic volume (APC or VS) which could have been stabilised by an external fixator. Based on our findings we recommend skeletal stabilisation and, if indicated, laparotomy to deal with sources of intraperitoneal blood loss before pelvic angiography. Embolisation of pelvic arterial bleeding is a worthwhile procedure in patients with hypotension which is unresponsive to these interventions.

Adolescent↗

Determination of cantilever length-anterior-posterior spread ratio assuming failure criteria to be the compromise of the prosthesis retaining screw-prosthesis joint.

The maximum cantilever length-anterior-posterior spread (CL-AP) ratio is often used as an indication of the ability to cantilever in completely implant-supported prostheses. The CL-AP ratios were determined assuming that failure occurs when the prosthesis retaining screw-prosthesis joint was compromised by either compressive (exceeding the pretorque value) or tensile (opening of the joint via plastic deformation) vertical forces using the Skalak model. Geometric arrangements of three, four, five, and six implants were analyzed. Force variables were 143, 200, and 400 N for the applied force, the pretorque value, and the joint tensile yield strength, respectively. The pretorque value was always exceeded before the yield strength. Allowable CL-AP ratios were (1) lower than those previously reported and (2) found to be 0.5 to 1.8, 0.7 to 1.6, 1.1 to 1.7, and 1.8 for three, four, five, and six implants, respectively. Although implant distributions with the highest AP often provide adequate occlusion, the results of this study indicate that the use of a single CL-AP ratio alone is not necessarily a good indicator of the ability to cantilever.

Algorithms↗