Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “shell”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82Linked to original sources

Platinum monolayer on nonnoble metal-noble metal core-shell nanoparticle electrocatalysts for O2 reduction.

We synthesized a new class of O2 electrocatalysts with a high activity and very low noble metal content. They consist of Pt monolayers deposited on the surfaces of carbon-supported nonnoble metal-noble metal core-shell nanoparticles. These core-shell nanoparticles were formed by segregating the atoms of the noble metal on to the nanoparticles' surfaces at elevated temperatures. A Pt monolayer was deposited by galvanic displacement of a Cu monolayer deposited at underpotentials. The mass activity of all the three Pt monolayer electrocatalysts investigated, viz., Pt/Au/Ni, Pt/Pd/Co, and Pt/Pt/Co, is more than order of magnitude higher than that of a state-of-the-art commercial Pt/C electrocatalyst. Geometric effects in the Pt monolayer and the effects of PtOH coverage, revealed by electrochemical data, X-ray diffraction, and X-ray absorption spectroscopy data, appear to be the source of the enhanced catalytic activity. Our results demonstrated that high-activity electrocatalysts can be devised that contain only a fractional amount of Pt and a very small amount of another noble metal.

Letter↗

Recombination dynamics of CdTe/CdS core-shell nanocrystals.

The recombination dynamics of zinc-blende-type, deep-red emitting CdTe/CdS core-shell nanocrystals is studied over a wide temperature range. Two characteristic decay regimes are found: a temperature-dependent decay component of a few nanoseconds and a long-living temperature-independent component of approximately 315 ns. The average decay time of the exciton states changes from 20 to 5ns when the temperature is increased from 15 to 295 K. At low temperatures, the observed decay behavior is assigned to thermally induced population and decay of the allowed exchange-split exciton states. At temperatures above T>100 K, nonradiative decay channels involving phonons start to contribute to the exciton recombination. The observed broad distribution in decay times, monitored by stretched exponential fitting functions, we explain by variations in the electron-hole overlap caused by a partly incomplete CdTe/CdS core-shell structure and the nearly energy-degenerated bright and dark state superposition.

Journal Article↗

Preparation and third-order optical nonlinearity of self-assembled chitosan/CdSe-ZnS core-shell quantum dots multilayer films.

The self-assembled chitosan CdSe quantum dots (QDs) and chitosan CdSe-ZnS core-shell QDs films have been prepared by using layer-by-layer electrostatic technique. The well-ordered nanostructure and the layer-by-layer deposition of the QDs are revealed by AFM and exciton absorption spectra, respectively. The optical nonlinearity of the composite films were studied by using Z-scan technique with femtosecond pulses at the wavelength of 790 nm, the value of third-order susceptibility of core-shell QDs are measured to be about 1.1 x 10(-8) esu, which is about 200% larger than that of CdSe QDs of 5.3 x 10(-9) esu. This has potential applications in all-optical switches in optical information processing.

Journal Article↗

Raman spectroscopic study on the structure in the surface and the bulk shell of Ce(x)Pr(1-x)O(2-delta) mixed oxides.

The difference between the surface and the bulk shell of Ce(x)Pr(1-x)O(2-delta) mixed oxides was studied by Raman spectroscopy with four different excitation lasers. Two Raman peaks appear at 465 and 570 cm(-1) under all of the four lasers. The former is attributed to the Raman active F(2g) mode of CeO2, while the latter is attributed to oxygen vacancy. On the basis of the fact that the laser with shorter wavelength is closer to the electronic adsorption of samples, it is found that the Raman information detected by excitation laser with shorter wavelength is more sensitive to the surface region of samples. An inflection is observed in the relationship of the value I570/I465 to the Ce content in Ce(x)Pr(1-x)O(2-delta). With the increase in the wavelength of excitation laser, the Ce content corresponding to the inflection decreases. Combined with the surface concentration obtained by XPS, it can be deduced that the composition of Ce(x)Pr(1-x)O(2-delta) mixed oxide particles in the surface region and the bulk shell are different, the former is enrichment of Pr component and the latter is enrichment of Ce component. The thickness of the surface layer with rich Pr component decreases with the increase in the Ce content.

Journal Article↗

Core-shell and hollow nanocrystal formation via small molecule surface photodissociation; Ag@Ag2Se as an example.

Metallic Ag nanoparticles have been converted to Ag2Se nanoparticles at ambient temperature and open atmosphere by UV photodissociation of adsorbed CSe2 on the Ag core surface. The photolysis could be prevented at any stage yielding Ag@Ag2Se core-shell structures of different thickness. Depending on the initial Ag nanoparticle size, either hollow or filled nanocrystals of Ag2Se could be prepared. The Kirkendall effect has been proposed to account for the formation of hollow nanoparticles. A coated-sphere Drude model has been used to explain the redshift of the Ag plasmon band as a function of the Ag2Se shell thickness as well as to provide the first estimates of the wavelength-dependent dielectric function of Ag2Se. This photochemical method might be especially promising for carrying out a direct room-temperature phototransformation of metallic into semiconductor nanostructures already assembled on surface templates.

Crystallization↗

Excited carrier dynamics of alpha-Cr2O3/alpha-Fe2O3 core-shell nanostructures.

In this work alpha-Cr(2)O(3)/alpha-Fe(2)O(3) core-shell polycrystalline nanostructures were synthesized by using alpha-Cr(2)O(3) nanoparticles as seed crystals during aqueous nucleation. The formation of alpha-Fe(2)O(3) polycrystallites on alpha-Cr(2)O(3) surfaces was confirmed by X-ray diffraction, transmission electron microscopy, and energy-dispersive X-ray analysis. The excited-state relaxation dynamics of as-grown core-shell structures and "pure" alpha-Fe(2)O(3) particles of the same size were measured with femtosecond transient absorption spectroscopy. The results show the carrier lifetimes decay within a few picoseconds regardless of sample. This is likely due to fast recombination/trapping of carriers to defects and iron d-states.

Journal Article↗

Core-shell microspherical Ti(1-x)Zr(x)O2 solid solution photocatalysts directly from ultrasonic spray pyrolysis.

A series of Ti(1-x)Zr(x)O(2) solid solutions photocatalysts (x = 0.000, 0.045, 0.090, 0.135, and 0.180) was directly obtained by an ultrasonic spray pyrolysis method. Compared with previous methods for solid solutions, our preparation was very fast. The resulting samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, nitrogen adsorption, and UV-vis diffuse reflectance spectroscopy. The characterizations revealed core-shell spherical structures of the resulting solid solutions. We evaluated photocatalytic activities of the solid solutions on degradation of rhodamine B in aqueous solution under simulated solar light. It was found that Ti(0.91)Zr(0.09)O(2) solid solution exhibited the highest photocatalytic activity among all the as-prepared samples. Its activity was much higher than that of P25. The formation mechanism of core-shell spherical structures was proposed. Moreover, we successfully extended this method to prepare microspheres of ceria and ceria-zirconia solid solutions. We think this general method may be easily scaled up for industrial production of microspherical solid solutions photocatalysts and catalysts.

Adsorption↗

Electronic and structural shell closure in AgCu and AuCu nanoclusters.

The structures of AgCu clusters containing 40 atoms are investigated. The most promising structural families (fcc clusters, capped decahedra, and two types of capped polyicosahedra) are singled out by means of global optimization techniques within an atom-atom potential model. Then, representative clusters of each family are relaxed by means of density-functional methods. It is shown that, for a large majority of compositions, a complex interplay of geometric and electronic shell-closure effects stabilizes a specific polyicosahedral family, whose clusters are much lower in energy and present large HOMO-LUMO gaps. Within this family, geometric and quantum effects concur to favor magic structures associated with core-shell chemical ordering and high symmetry, so that these clusters are very promising from the point of view of their optical properties. Our results also suggest a natural growth pathway of AgCu clusters through high-stability polyicosahedral structures. Results for AuCu clusters of the same size are reported for comparison, showing that the interplay of the different effects is highly material specific.

Journal Article↗

On the ultrafast infrared spectroscopy of anion hydration shell hydrogen bond dynamics.

Molecular Dynamics simulations are used to examine the title issue for the I-/HOD/D2O solution system in connection with recent ultrafast infrared spectroscopic experiments. It is argued that the long "modulation time" associated with the spectral diffusion of the OH frequency, extracted in these experiments, should be interpreted as reflecting the escape time of an HOD from the first hydration shell of the I- ion, i.e., the residence time of an HOD in this solvation shell. Shorter time features related to the oscillation of the OH ...I- hydrogen bond and the breaking and making of this bond are also discussed.

Journal Article↗

PNIPAM-co-polystyrene core-shell microgels: structure, swelling behavior, and crystallization.

The present contribution presents the single-step preparation and characterization of poly(N-isopropyl acrylamide)-co-polystyrene core-shell microgels with varying polystyrene content. The swelling behavior of the particles is investigated using dynamic light scattering and differs significantly from the swelling behavior of poly(N-isopropyl acrylamide) homopolymer particles. The lower critical solution temperature is found to be shifted to lower temperatures upon increasing the polystyrene content of the particles. The core-shell structure of the particles is revealed by means of small angle neutron scattering (SANS) using the method of contrast variation. Additionally, the formation of mesoscopic crystals of these particles is investigated by means of scanning electron microscopy and also by SANS. The particles seem to have preferable properties with respect to crystallization compared to homopolymer microgels.

Journal Article↗

Core-shell nanostructures from single poly(N-vinylcaprolactam) macromolecules: stabilization and visualization.

Formation of core-shell poly(N-vinylcaprolactam) (PVCL) single-molecule nanostructures due to interaction of PVCL with metal ions was studied using transmission electron microscopy, 13C NMR, and light scattering. This study demonstrates that addition of CoCl2 to PVCL in its globular conformation yields unimolecular core-shell polymer particles with the core decorated with Co(II) ions. The crucial condition for formation of well-defined unimolecular nanostructures is the presence of stable globular aggregates in aqueous solution. Moreover, the metal ions should have a sufficiently high coordination number (higher than 2) to provide a cross-linking and stabilization of the core.

Caprolactam↗

pH-responsive core-shell particles and hollow spheres attained by macromolecular self-assembly.

According to our "block-copolymer-free" strategy for self-assembly of polymers, noncovalently connected micelles (NCCM) with poly(epsilon-caprolactone) (PCL) as the core and poly(acrylic acid) (PAA) as the shell in aqueous solutions were attained due to specific interactions between the component polymers. The micellar structure was then locked in by the reaction of PAA with diamine. Afterward, hollow spheres based on PAA network were obtained by either core degradation with lipase or core dissolution with dimethylformamide of the cross-linked micelles. The cavitation process was monitored by dynamic light scattering, which indicated a mass decrease and size expansion. The hollow structure is confirmed by transmission electron microscopy observations. The resultant hollow spheres are pH- and salt-responsive: there is a substantial volume increase when pH changes from acid to base, and vice versa. The volume change takes place dramatically over the pH-range from 5.8 to 7.5. Furthermore, this volume-pH-dependence is found to be completely reversible provided the effect of ionic strength is excluded. The volume change can be adjusted by changing the shell thickness and the cross-linking degree of the hollow spheres. The salt effect on the hollow sphere size depends on pH: with increasing salt concentration the size shows an increase, a decrease, and a little change in acidic, basic, and neutral media, respectively.

Journal Article↗

Synthesis of polystyrene/poly[2-(dimethylamino)ethyl methacrylate-stat-ethylene glycol dimethacrylate] core-shell latex particles by seeded emulsion polymerization and their application as stimulus-responsive particulate emulsifiers for oil-in-water emulsions.

Surfactant-stabilized polystyrene (PS) latex particles with a mean hydrodynamic diameter of 155 nm were prepared by aqueous emulsion polymerization using 2,2'-azobis(2-amidinopropane) hydrochloride as a cationic radical initiator. Seeded aqueous emulsion copolymerizations of 2-(dimethylamino)ethyl methacrylate (DMA) and ethylene glycol dimethacrylate (EGDMA) were conducted in the presence of these PS particles to produce two batches of colloidally stable core-shell latex particles, in which the shell comprised a cross-linked P(DMA-stat-EGDMA) overlayer. Both the PS and PS/P(DMA-stat-EGDMA) latexes were characterized in terms of their particle size, morphology, and composition using dynamic light scattering, electron microscopy, and FT-IR spectroscopy, respectively. Using the PS/P(DMA-stat-EGDMA) latex particles as a pH-responsive particulate ('Pickering'-type) emulsifier, polydisperse n-dodecane-in-water emulsions were prepared at pH 8 that could be partially broken (demulsified) on lowering the solution pH to 3. These emulsions were characterized in terms of their emulsion type, mean droplet diameter, and morphology using electrical conductivity and Mastersizer measurements, optical microscopy, and scanning electron microscopy (using critical point drying for sample preparation).

Journal Article↗

Electroactive core-shell nanocluster films of heme proteins, polyelectrolytes, and silica nanoparticles.

Novel protein core-shell nanocluster films were assembled layer by layer on solid surfaces. In the first step, positively charged heme protein hemoglobin (Hb) or myoglobin (Mb) and negatively charged poly(styrenesulfonate) (PSS) were alternately adsorbed on the surface of SiO2 nanoparticles, forming core-shell SiO2-(protein/PSS)m nanoclusters. In the second step, the SiO2-(protein/PSS)m nanoclusters and polycationic poly(ethylenimine) (PEI) were assembled layer by layer on various solid substrates, forming [[SiO2-(protein/PSS)m]/PEI]n films. Various techniques were used to characterize the nanoclusters and monitor the film growth. [[SiO2-(protein/PSS)m]/PEI]n films at pyrolytic graphite (PG) electrodes exhibited well-defined, chemically reversible cyclic voltammetric reduction-oxidation peaks characteristic of the heme Fe(III)/Fe(II) redox couples. The proteins in the films retained near native conformations in the medium pH range, and the films catalyzed electrochemical reduction of oxygen and hydrogen peroxide. Advantages of the nanocluster films over the simple [SiO2/protein]n layer-by-layer films include a larger fraction of electroactive protein and higher specific biocatalytic activity. Using this approach, biocatalytic activity can be tailored and controlled by varying the number of bilayers deposited on the nanoparticle cores and the number of nanocluster layers on electrodes.

Electrochemistry↗

Small-angle neutron scattering on a core-shell colloidal system: a contrast-variation study.

Small-angle neutron scattering (SANS) measurements are reported on a sterically stabilized, core-shell colloidal system using contrast variation. Aqueous dispersions of polystyrene particles bearing grafted poly(ethylene glycol) (PEG) have been studied over a large range of particle concentrations and two different solvent conditions for the PEG polymer. SANS data are analyzed quantitatively by modeling the particles as core-shell colloids. In a good solvent and under particle contrast conditions, an effective hard-sphere interaction captures excluded-volume interactions up to high concentrations. Contrast variation, through isotopic substitution of both the core and solvent, expedite a detailed study of the PEG layer, both in the dilute limit and as a function of the particle concentration. Upon diminishing the solvent quality, subtle changes in the PEG layer translate into attractions among particles of moderate magnitude.

Journal Article↗

Aqueous synthesis of copper nanocubes and bimetallic copper/palladium core-shell nanostructures.

We have synthesized copper nanocubes with uniform shape and size and copper/palladium core-shell bimetallic nanostructures in high yield by a two-stage procedure in the presence of dodecyl benzene sulfonic acid sodium. The copper nanocubes with a slight hole in the centers of the six {100} surfaces was prepared at the first stage. Later, the bimetallic copper/palladium core-shell nanostructures formed on the basis of the successive reduction of H2PdCl4 and the Pd growth on the surfaces of the Cu seeds.

Journal Article↗

Formation of gold@polymer core-shell particles and gold particle clusters on a template of thermoresponsive and pH-responsive coordination triblock copolymer.

Template synthesis of various morphological gold colloidal nanoparticles using a thermoresponsive and pH-responsive coordination triblock copolymer of poly(ethylene glycol)-b-poly(4-vinylpyridine)-b-poly(N-isopropylacrylamide) is studied. The template morphology of the thermoresponsive and pH-responsive coordination triblock copolymer, which can be tuned by simply changing the pH or temperature of the triblock copolymer aqueous solution, ranges from single chains to core-corona micelles and further to micellar clusters. Various morphological gold colloidal nanoparticles such as discrete gold nanoparticles, gold@polymer core-shell nanoparticles, and gold nanoparticle clusters are synthesized on the corresponding template of the triblock copolymer by first coordination with gold ions and then reduction by NaBH4. All three resultant gold colloidal nanoparticles are stable in aqueous solution, and their sizes are 2, 10, and 7 nm, respectively. The gold@polymer core-shell nanoparticles are thermoresponsive. The gold nanoparticle cluster has a novel structure, and each one holds about 40 single gold nanoparticles.

Journal Article↗

Electrochemical and spectroscopic characterization of organic compound uptake in silica core-shell nanocapsules.

Oil-filled silica nanocapsules consisting of a hydrophobic liquid core and a silicate shell have been shown to efficiently extract hydrophobic compounds from aqueous media. With a view toward quantifying the selectivity of these systems, a series of electrochemical and spectroscopic measurements was performed. Uptake and kinetics experiments were carried out through electrochemical measurements by using solutions of lipophilic electroactive molecules of different sizes and with different affinities for silica. Other solutions with fluorescent probes were used for spectrophotometry measurements. In this work we report the environment where the lipophilic compounds studied end up after absorption and the kinetics of their uptake by the oil-filled silica nanocapsules with different shell thicknesses.

Journal Article↗