Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Polyelectrolytes”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82Linked to original sources
PubMed1996

The use of chitosan to increase the stability of calcium alginate beads with entrapped yeast cells.

A method was developed for increasing the stability of calcium alginate beads with entrapped Saccharomyces cerevisiae cells. Polyelectrolyte complexes were used as surface-coating materials by dropping alginate into chitosan. The coacervation agent sodium triphosphate was needed for the formation of the polyelectrolyte complexes. Gel beads maintained their rigidity during ethanol production and were chemically stable in phosphate buffer. No differences in ethanol production were found between S. cerevisiae immobilized in calcium alginate and in calcium alginate coated with polyelectrolyte complexes. The maximum productivity by immobilized S. cerevisiae cells was 74.1 g of ethanol/h per g of gel beads obtained at pH 4.8-6.0 and at 30 degrees C.

Alginates↗
PubMed1996

Dissecting the free energy of drug binding to DNA.

Advances in polyelectrolyte theory have provided a simple and straightforward basis for dissecting the free energy of ligand binding to DNA into its polyelectrolyte and non-electrostatic contributions. Experimental determination of the ligand-DNA binding constant as a function of monovalent salt concentration is required to provide the quantity (delta lnK(obs)/delta ln[MX]), from which delta Gpe may be calculated. delta Gpe is the contribution to the observed binding free energy from the polyelectrolyte effect. delta Gpe is entropic in origin, and results from the release of DNA-bound cations upon ligand binding. The non-electrostatic free energy contribution, delta Gt, is independent of salt concentration, and reflects the contribution of hydrogen bonding and hydrophobic and van der Waals interactions to the stability of the ligand-DNA complex. When comparing the affinity of different ligands for DNA, it is delta Gt that should be compared, since the effect of ligand charge may then be removed from consideration.

DNA↗
PubMed2005

Noncovalent coatings for the separation of synthetic polypeptides by nonaqueous capillary electrophoresis.

Recently, we demonstrated the possibility to extend the range of capillary electrophoresis (CE) applications to the separation of non-water-soluble synthetic polymers. This work focuses on the control of the electro-osmotic flow (EOF) and on the limitation of the solute adsorption in nonaqueous electrolytes. For these purposes, different strategies were investigated. For the initial, a viscous additive (ethylene glycol or glycerol) was used in the electrolyte in order to decrease the EOF magnitude and, possibly, to compete with solute adsorption. A second strategy was to modify, before separation, the fused-silica capillary wall by the adsorption of poly(ethylene oxide) (PEO) via hydrogen bonding. The influence of the molecular mass of the adsorbed PEO on the EOF magnitude and direction was studied in electrolytes based on methanol/acetonitrile mixtures containing ammonium ions. For PEO molecular masses above 1000 g/mol, reversed (anodic) EOF were reported in accordance with previous results obtained with PEO covalently bonded capillaries. The influence of the nature and the concentration of the background electrolyte cation on the EOF magnitude and direction were also investigated. A third strategy consisted in modifying the capillary wall by the adsorption of a cationic polyelectrolyte layer. Advantageously, this polyelectrolyte layer suppressed the adsorption of the polymer solutes onto the capillary wall. The results obtained in this work confirm the high potential and the versatility of CE for the characterization of ionizable organic polymers in nonaqueous media.

Adsorption↗
PubMed1996

Immune response to progesterone involved in Cu(2+)-mediated polyanion-protein complex--antigen specificity and affinity of hybridoma clones.

The immunogenic properties of water soluble (PAA-Cu(2+)-BSA) and colloidal (PAA-Cu(2+)-BSA.P) polycomplexes were investigated, and the specificity of antibodies produced was analyzed. Polycomplexes containing progesterone appeared to possess a high steroid-specific immunogenic activity. A comparative study of immunogenic properties of polycomplexes versus BSA.P + incomplete Freund's adjuvant (IFA) mixtures revealed differences in regards to the specificity of antibody production. In contrast to the IFA system, polycomplexes were able to generate P- as well as BSA-specific antibodies. Such a response is determined, possibly, by increases in the immunogenicity of weak antigenic determinants on the surface of protein globules and or by the representation of dormant determinants existing in the miner site upon complex formation with polyelectrolytes. Finally, using a short immunization procedure based on use of PAA-Cu(2+)-BSA polycomplexes, we produced seven monoclonal antibodies against progesterone included in polyelectrolyte complexes with affinities Kd ranging between 1.3 x 10 (-5) and 9 x 10(-8) M.

Animals↗
PubMed2004

Membrane-destabilizing polyanions: interaction with lipid bilayers and endosomal escape of biomacromolecules.

Water-soluble synthetic polyanions are employed nowadays in a multitude of industrial and biomedical applications and are studied extensively as simplified models of natural polyelectrolytes. The most interesting feature of carboxylated polymers is undoubtedly their ability to undergo coil-to-globule conformational change upon a decrease in pH of the surrounding environment. Over the years, scientists have gained better insights into the conformational behavior of these polymers in solution and in the presence of membrane bilayers. In addition, when used as protein models, anionic polyelectrolytes can provide valuable information on physiological processes such as domain formation in biological membranes. Recently, polyanions have been evaluated as part of drug delivery systems, either as complexes/conjugates with biomolecules, or in the preparation of pH-sensitive liposomal formulations. This article reviews the fundamental and practical aspects of pH-responsive synthetic polyanions in drug delivery. The pH-dependent conformational behavior of these polymers in aqueous solution is described in detail using poly(methacrylic acid) as the model polymer. Since binding to cellular membranes is a fundamental issue in understanding the mechanism of action of polyanions in cytoplasmic drug delivery, studies characterizing their interactions with phospholipid bilayers at neutral as well as at acidic pH are reviewed. Finally, pH-responsive delivery systems based on these polymers are described. As the conformational properties of pH-sensitive polyanions can be easily modulated by carefully adjusting their composition, such formulations may represent an attractive strategy to improve the escape of active biomolecules from acidic endosomal compartments.

Animals↗
PubMed1986

Endothelial binding sites for heparin. Specificity and role in heparin neutralization.

The specificity of endothelial binding sites for heparin was investigated with heparin fractions and fragments differing in their Mr, charge density and affinity for antithrombin III, as well as with heparinoids and other anionic polyelectrolytes (polystyrene sulphonates). The affinity for endothelial cells was estimated by determining I50 values in competition experiments with 125I-heparin. We found that affinity for endothelial cells increases as a function of Mr and charge density (degree of sulphation). Binding sites are not specific receptors for heparin. Other anionic polyelectrolytes, such as pentosan polysulphates and polystyrene sulphonates, competed with heparin for binding to endothelial cells. Fractions of standard heparin with high affinity for antithrombin III also had greater affinity for endothelium. However, these two properties of heparin (affinity for antithrombin III and affinity for endothelial cells) could be dissociated. Oversulphated heparins and oversulphated low-Mr heparin fragments had lower anticoagulant activity and higher affinity for endothelial cells than did their parent compounds. Synthetic pentasaccharides, bearing the minimal sequence for binding to antithrombin III, did not bind to endothelial cells. Binding to endothelial cells involved partial neutralization of heparin. Bound heparin exhibited only 5% and 7% of antifactor IIa and antifactor Xa specific activity, respectively. In the presence of 200 nM-antithrombin III, and in the absence of free heparin, a limited fraction (approx. 30%) of bound heparin was displaced from endothelial cells during a 1 h incubation period. These data suggested that a fraction of surface-bound heparin could represent a pool of anticoagulant.

Antithrombin III↗
PubMed1999

Thermodynamics of the conformational transition of biopolyelectrolytes: the case of specific affinity of counterions.

A formal development of the Counterion Condensation theory (CC) of linear polyelectrolytes has been performed to include specific (chemical) affinity of condensed counterions, for polyelectrolyte charge density values larger than the critical value of condensation. It has been conventionally assumed that each condensed counterion exhibits an affinity free-energy difference for the polymer, (DeltaG(aff)). Moreover, the model assumes that the enthalpic and entropic contributions to DeltaG(aff), i.e., DeltaH(aff) and DeltaS(aff), are both independent of temperature, ionic strength and polymer concentration. Equations have been derived relative to the case of the thermally induced, ionic strength dependent, conformational transition of a biopolyelectrolyte between two conformations for which chemical affinity is supposed to take place. The experimental data of the intramolecular conformational transition of the ionic polysaccharide kappa-carrageenan in dimethylsulfoxide (DMSO) have been successfully compared with the theoretical predictions. This novel approach provides the enthalpic and entropic affinity values for both conformations, together with the corresponding thermodynamic functions of nonpolyelectrolytic origin pertaining to the biopolymer backbone change per se, i.e., DeltaH(n.pol) and DeltaS(n.pol), according to a treatment previously shown to be successful for lower values of the biopolyelectrolyte linear charge density. The ratio of DeltaH(n.pol) to DeltaS(n.pol) was found to be remarkably constant independent of the value of the dielectric constant of the solvent, from formamide to water to DMSO, pointing to the identity of the underlying conformational process.

Biopolymers↗
PubMed2000

Hydration of pectic polysaccharides.

The hydration and swelling of pectic polysaccharides was examined at different pHs and ionic strengths as a function of osmotic stress. For weakly charged pectic polysaccharides at low concentrations of a monovalent salt (20 mM), the main driving force for swelling originates from a polyelectrolyte effect due to the translational entropy of ions within the film. Swelling is reduced at higher salt concentrations and lower pHs. Polyelectrolyte collapse and minimal swelling is observed for more highly charged pectic polysaccharides. Replacement of the Na(+) counterion with Ca(2+) results in minimal swelling and the formation of network structures even for the weakly charged pectic polysaccharides.

Absorption↗
PubMed2002

Hollow polymer shells from biological templates: fabrication and potential applications.

Three-dimensional ultrathin polymer shells have been produced by a combination of step-by-step adsorption of polyelectrolytes on glutaraldehyde-treated human erythrocytes and subsequent solubilization of the cytoplasmatic constituents by means of a deproteinizing agent. The obtained hollow films preserve both the size and shape of the templating cells. This opens a pathway for the fabrication of polymeric capsules within a wide range of size and shape by using various biological templates. They may have exciting potential applications, such as templates for nanocomposites, as containers for a large class of materials, or as cages for chemical reactions. The thickness of the films can be adjusted over a large range: from a few nm up to several tens of nm. The polymer shells are permeable to small molecules and ions but not to macromolecules. An increase in the ionic strength of the solution up to 100 mmol make the capsules permeable for proteins. Permeability and conductivity studies have provided evidence that the adsorption of lipids on polyelectrolyte layers is a means of producing capsules with controlled permeability properties. 6-Carboxyfluorescein and Rhodamin 6G were precipitated within the capsules.

Biotechnology↗
PubMed2000

A semi-empirical approach to the modeling of the electrophoretic mobility in free solution: application to polystyrenesulfonates of various sulfonation rates.

This work focuses on the understanding of the electrophoretic behavior of flexible chains of polystyrenesulfonates (PSSs) in free solution. It deals mainly with the variation of the electrophoretic mobility with (i) the polymerization degree (N) of fully sulfonated PSSs and (ii) the sulfonation rate of randomly sulfonated PSSs. In both cases, the electrophoretic mobility was modeled following a semi-empirical approach which involves parameters retaining a physical meaning. Fully sulfonated PSS oligomers, having a length smaller than or similar to the Debye length, exhibit a particular electrophoretic behavior, in-between that observed for multicharged small molecules and that for polyelectrolytes. The electrophoretic mobility of these oligomers increases strongly with N, which is attributed to a hydrodynamic coupling between monomers. Then the mobility is maximum for an N of about 10, for which the PSS oligomers are still in a rod-like conformation. Afterwards, as N increases and the PSSs are larger than the Debye length, the electrophoretic mobility decreases slowly until it reaches a constant value corresponding to the free-draining behavior. Next, the electrophoretic behavior of long PSS (N about 1,200) differing in their sulfonation rates was investigated. The effective charge rates were determined independently by conductimetric measurements and the mobilities were modeled as a function of the sulfonation rate. The PSS behavior observed was compared to the one previously reported for classical polyelectrolytes having hydrophilic backbones, such as copolymers of poly(acryamide-coacrylic acid). A specific behavior has been pointed out for these partially sulfonated PSSs, which is attributed to the hydrophobicity of their backbone. Finally, it is shown that separations of PSSs of different sulfonation rates can be obtained with electrolytes containing an anionic surfactant or methanol.

Electrophoresis↗
PubMedDate not supplied

Binding of meso-tetrakis(N-methylpyridiniumyl)porphyrin isomers to DNA: quantitative comparison of the influence of charge distribution and copper(II) derivatization.

Factors influencing the binding of tetracationic porphyrin derivatives to DNA have been comprehensively evaluated by equilibrium dialysis, stopped-flow kinetics, etc., for mesotetrakis (4-N-methylpyridiniumyl)porphyrin [TMpyP (4)]. Technical difficulties have previously precluded a comprehensive study of metalloporphyrins. Since electrostatic interactions with the DNA and metal derivatization of the porphyrins have important consequences, we have investigated in greater detail two isomers of TMpyP (4) (meso-tetrakis(3-N-methylpyridiniumyl)porphyrin, [TMpyP (3)] and meso-tetrakis(2-N-methylpyridiniumyl)porphyrin [TMpyP (2)]) in which the position of the charged centers has been varied. A comprehensive study of the Cu(II) derivatives, e.g., CuTMpyP (4), was possible since the difficulties encountered previously with Ni(II) compounds were not a problem with Cu(II) porphyrins [J. A. Strickland, L. G. Marzilli, M. K. Gay, and W. D. Wilson (1988) Biochemistry 27, 8870-8878]. At 25 degrees C, the apparent equilibrium constants [Kobs] decreased with increasing [Na+] for all porphyrins. The Kobs values were comparable for TMpyP (4) and TMpyP (3) binding to either polyd(G-C).polyd(G-C) [poly[d(G-C)2]] or poly[d(A-T)].poly[d(A-T)] [poly[d(A-T)2]]. For the copper(II) porphyrins, the Kobs values were about fivefold greater. The Kobs value for CuTMpyP (2) binding to poly[d(G-C)2] was too small to measure under typical salt conditions; however, Kobs for binding to poly[d(A-T)2] was about two orders of magnitude smaller than those found for CuTMpyP (4) or CuTMpyP (3). Application of the condensation theory for polyelectrolytes suggests about three charge interactions when CuTMpyP (4), CuTMpyP (3), and TMpyP (3) bind to poly[d(G-C)2] or poly[d(A-T)2], a result comparable to that reported for TMpyP (4). At 20 degrees C and 0.115 M [Na+], incorporation of copper decreased the rates of dissociation from poly[d(A-T)2] by a 100-fold compared to those reported for TMpyP (4) but had little effect on the rates of dissociation from poly[d(G-C)2]. Also, movement of the H3CN+ group from the fourth to the third position of the pyridinium ring enhanced the rates of dissociation from poly[d(A-T)2] but decreased the rates of dissociation from poly[d(G-C)2]. From polyelectrolyte theory, the [Na+] dependence of the dissociation rates from poly[d(G-C)2] is consistent with intercalative binding, while that for poly[d(A-T)2] is consistent with an outside binding model. For calf thymus [CT] DNA at 20 degrees C, a greater decrease in the AT than in the GC imino 1H-nmr signal was observed upon addition of CuTMpyP (2), suggesting selective outside binding to the AT regions.(ABSTRACT TRUNCATED AT 400 WORDS)

Base Sequence↗
PubMed1994

Monte Carlo and Poisson-Boltzmann calculations of the fraction of counterions bound to DNA.

The counterion density and the condensation region around DNA have been examined as functions of both ion size and added-salt concentration using Metropolis Monte Carlo (MC) and Poisson-Boltzmann (PB) methods. Two different definitions of the "bound" and "free" components of the electrolyte ion atmosphere were used to compare these approaches. First, calculation of the ion density in different spatial regions around the polyelectrolyte molecule indicates, in agreement with previous work, that the PB equation does not predict an invariance of the surface concentration of counterions as electrolyte is added to the system. Further, the PB equation underestimates the counterion concentration at the DNA surface, compared to the MC results, the difference being greatest in the grooves, where ionic concentrations are highest. If counterions within a fixed radius of the helical axis are considered to be bound, then the fraction of polyelectrolyte charge neutralized by counterions would be predicted to increase as the bulk electrolyte concentration increases. A second categorization--one in which monovalent cations in regions where the average electrostatic potential is less than -kT are considered to be bound--provides an informative basis for comparison of MC and PB with each other and with counterion-condensation theory. By this criterion, PB calculations on the B form of DNA indicate that the amount of bound counterion charge per phosphate group is about .67 and is independent of salt concentration. A particularly provocative observation is that when this binding criterion is used, MC calculations quantitatively reproduce the bound fraction predicted by counterion-condensation theory for all-atom models of B-DNA and A-DNA as well as for charged cylinders of varying linear charge densities. For example, for B-DNA and A-DNA, the fractions of phosphate groups neutralized by 2 A hard sphere counterions are 0.768 and .817, respectively. For theoretical studies, the radius enclosing the region in which the electrostatic potential is calculated to be less than -kT is advocated as a more suitable binding or condensation radius than that enclosing the fraction of counterions given by (1 - epsilon-1). A comparison of radii calculated using both of these definitions is presented.

DNA↗
PubMed2005

Locally Addressable Electrochemical Patterning Technique (LAEPT) applied to poly(L-lysine)-graft-poly(ethylene glycol) adlayers on titanium and silicon oxide surfaces.

The protein-resistant polycationic graft polymer, poly(L-lysine)-g-poly(ethylene glycol) (PLL-g-PEG), was uniformly adsorbed onto a homogenous titanium surface and subsequently subjected to a direct current (dc) voltage. Under the influence of an ascending cathodic and anodic potential, there was a steady and gradual loss of PLL-g-PEG from the conductive titanium surface while no desorption was observed on the insulating silicon oxide substrates. We have implemented this difference in the electrochemical response of PLL-g-PEG on conductive titanium and insulating silicon oxide regions as a biosensing platform for the controlled surface functionalization of the titanium areas while maintaining a protein-resistant background on the silicon oxide regions. A silicon-based substrate was micropatterned into alternating stripes of conductive titanium and insulating silicon oxide with subsequent PLL-g-PEG adsorption onto its surfaces. The surface modified substrate was then subjected to +1800 mV (referenced to the silver electrode). It was observed that the potentiostatic action removed the PLL-g-PEG from the titanium stripes without inducing any polyelectrolyte loss from the silicon oxide regions. Time-of-flight secondary ions mass spectroscopy and fluorescence microscopy qualitatively confirmed the PLL-g-PEG retention on the silicon oxide stripes and its absence on the titanium region. This method, known as "Locally Addressable Electrochemical Patterning Technique" (LAEPT), offers great prospects for biomedical and biosensing applications. In an attempt to elucidate the desorption mechanism of PLL-g-PEG in the presence of an electric field on titanium surface, we have conducted electrochemical impedance spectroscopy experiments on bare titanium substrates. The results showed that electrochemical transformations occurred within the titanium oxide layer; its impedance and polarization resistance were found to decrease steadily upon both cathodic and anodic polarization resulting in the polyelectrolyte desorption from the titanium surface.

Biosensing Techniques↗
PubMedDate not supplied

Gel electrophoresis of an end-labeled DNA. I. Dynamics and trapping in constant fields.

A theory for the gel electrophoresis of a flexible polyelectrolyte, bearing an uncharged bulky label or an uncharged section at one end, is presented. We first consider a gel that is fully permeable to the label: we calculate the degree of stretching of the polyelectrolyte and its mobility as a function of chain size, electric field and label friction. Various regimes are identified, and their "existence domains" are calculated. For increasing friction, we predict a transition from a mobility decreasing with chain size to a mobility increasing with chain size. Secondly, we consider the possibility that the label may get trapped at some locations of the gel, a situation relevant to a method of "trapping electrophoresis" recently proposed by Ulanovsky et al. for DNA sequencing. A molecular model for detrapping by thermally activated "backward reptation" is constructed and solved using the Kramers rate-equation theory. Different closed analytical expressions and approximate scaling laws corresponding to different regimes of stretching and field strengths are predicted. The most striking result is a mobility which exponentially decreases past a critical size Np*, which decreases with increasing field. In the regime relevant to the experiments by Ulanowsky et al., we predict Np* approximately E-2/3. The predictions are in good qualitative agreement with presently available experiments, but further experimental investigations are suggested.

Chemical Phenomena↗
PubMed1995

Electrophopretic mobility of soft particles.

A recent theory of electrophoresis of "soft" particles, i.e., polyelectrolyte-coated colloidal particles (Ohshima, J. Colloid Interface Sci. 1994, 163, 474-483), is reviewed. This theory unites two different electrophoresis theories for rigid colloidal spherical particles and for spherical polyelectrolytes. An example is given of the analysis of electrophoretic mobility data on hydrogel-layer-coated latex particles.

Colloids↗
PubMed1996

Gel and free solution electrophoresis of variably charged polymers.

To assess the role of charge density on polyelectrolyte mobility, both gel and free solution electrophoresis experiments are performed on poly(acrylic acid) and acrylic acid/acrylamide copolymers. Control of charge density for poly-(acrylic acid) is achieved through solution pH, while control for acrylic acid/ acrylamide copolymers is obtained through chain composition. In either approach, the effective fraction of charged repeat units can be varied from 0 to 100% without a major interruption of solvent quality. Polyelectrolyte mobility in the presence of a monovalent counterion is observed to rise linearly with charge density when this density is low. A transition to charge density independence then occurs over a surprisingly narrow window of charge density. For vinyl polymers of the sort examined here, the transition occurs when 35-40% of the repeat units are charged. These observations are qualitatively consistent with the free solution electrophoresis model proposed by Manning and several previous data sets. An unexpected overlap of normalized gel and free solution data reveals that the charge density exerts a comparable influence in either environment. Results from the present study help define the experimental conditions in which electrophoresis can provide polymer separation by charge density and those in which the method can provide polymer separation by molecular weight.

Acrylates↗
PubMed2005

Electrokinetic properties of noncharged lipid nanocapsules: influence of the dipolar distribution at the interface.

Lipid nanocapsules (LNCs) containing poly(ethylene glycol) (PEG) were developed according to a phase inversion process without organic solvent. The distribution of PEG chains at the surface was determined due to electrokinetic properties, in order to correlate it with protein adsorption potentiality. In this aim, electrophoretic mobilities were measured as a function of ionic strength and pH, for particles differing by their size, dialysis effects, and the presence or not of lecithin in their shell. The study allowed the determination of the isoelectric point (pI) as well as the charge density (ZN) in relation with the dipolar distribution in the polyelectrolyte accessible layer (depth = 1/lambda), by using soft-particle electrophoresis analysis. These parameters pointed out that the PEG surface organization was dependent on the particle size. Moreover, this organization could be modified by dialyzing particles and/or by formulating them with or without lecithin. Lecithin was found to be present in the inner part of the polyelectrolyte layer and to play a role in the outer part disorganization. Dialyzing LNCs formulated with lecithin allowed to obtain stable and well-structured nanocapsules, ready to an in vivo use as drug delivery system.

Adsorption↗
PubMed1981

Anticoagulant activity of a synthetic heparinoid in relation to molecular weight and N-sulfate content.

Addition of chlorosulfonyl isocyanate to C==C bonds in cis-1,4-polyisoprene and reaction of the adduct with NaOH resulted in the formation of a water-soluble polyelectrolyte with N-sulfate and carboxylate groups. The polyelectrolyte showed anticoagulant activity and it was found, just as with heparin, that the activity was related to molecular weight and N-sulfate content.

Blood Coagulation↗