Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Films”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82Linked to original sources

Electron transfer reactions of redox cofactors in spinach photosystem I reaction center protein in lipid films on electrodes.

Thin film voltammetry was used to obtain direct, reversible, electron transfer between electrodes and spinach Photosystem I reaction center (PS I) in lipid films for the first time. This reaction center (RC) protein retains its native conformation in the films, and AFM showed that film structure rearranges during the first several minutes of rehydration of the film. Two well-defined chemically reversible reduction-oxidation peaks were observed for native PS I in the dimyristoylphosphatidylcholine films, and were assigned to phylloquinone, A(1) (E(m) = -0.54 V) and iron-sulfur clusters, F(A)/F(B) (E(m) = -0.19 V) by comparisons with PS I samples selectively depleted of these cofactors. Observed E(m) values may be influenced by protein-lipid interactions and electrode double-layer effects. Voltammetry was consistent with simple kinetically limited electron transfers, and analysis of reduction-oxidation peak separations gave electrochemical rate constants of 7.2 s(-)(1) for A(1) and 65 s(-)(1) for F(A)/F(B). A catalytic process was observed in which electrons were injected from PS I in films to ferredoxin in solution, mimicking in vivo electron shuttle from the terminal F(A)/F(B) cofactors to soluble ferredoxin during photosynthesis.

Catalysis↗

Fabrication and characterization of thin films of single-walled carbon nanotube bundles on flexible plastic substrates.

A convenient method to obtain patterns of films of single-walled carbon nanotubes (SWNT) bundles on flexible plastic is described. Using the Line Patterning method SWNT films of thickness ranging from approximately 300-1500 nm can be obtained from aqueous surfactant-supported dispersions of chemically purified SWNT bundles synthesized by the pulsed-laser ablation method. These films are strongly adherent and are competitive in performance with commercially available films of indium-tin-oxide (ITO) on plastics. For example, an approximately 1500 thick film of SWNT on poly(ethylene terephthalate) (PET) shows a surface resisitvity of approximately 80 Omega/sq, optical transparency >80%, and robust flexibility. Unlike ITO/PET, films of SWNT/PET can be folded and bent to a crease without cracking. The simple techniques involoved in obtaining these films (i.e., those without requiring lithography or ink-jet printing) could help facilitate the rapid fabrication of transparent, flexible electronic devices, heralding what promises to be a new approach towards the development of next-generation optoelectronic devices.

Journal Article↗

Aligned inclusion of hemicyanine dyes into silica zeolite films for second harmonic generation.

Silicalite-1 films (thickness = 400 nm) supported on both sides of glass plates (SL/G) were prepared, and hemicyanine dyes (HC-n) with different alkyl chain lengths (n, n = 3, 6, 9, 12, 15, 18, 22, and 24) were included into the silicalite-1 films by dipping SL/Gs into each methanol solution of HC-n (1 mM) for 1 d. The included numbers of HC-n per channel (N(C)) generally decreased with increasing n; that is, they were 6.4, 23.1, 15.4, 8.2, 5.7, 3.5, 0.9, and 1.2 molecules per channel, respectively. The d(33) value gradually increased with increasing n but decreased when n > 18; that is, they were 1.12, 0.50, 2.25, 3.59, 4.99, 5.30, 1.71, and 2.57 pm V(-1), respectively. However, d(33)/N(C) progressively increased with increasing n. The d(31) values were approximately 100 times smaller than the corresponding d(33) values, and the average d(33)/d(31) ratio was 109, which is higher than those of Langmuir-Blodgett (LB) films and poled polymers of nonlinear optical (NLO) dyes, by approximately 2-5 and approximately 30-50 times, respectively. The estimated average tilted angle of the dyes with respect to the channel direction was 7.7 degrees, and the calculated average order parameter was 0.97, which is approximately 480 times higher than the values observed from poled polymers. The degree of uniform alignment (DUA) generally increased with increasing n. The progressive increase of both DUA and d(33)/N(C) with n is attributed to the increase in the tendency of HC-n to enter hydrophobic silicalite-1 channels with the hydrophobic alkyl chain first. A more than 134-fold increase in DUA was observed upon increasing n from 6 to 24. The DUA of HC-24 in the silicalite-1 film reached close to 1. Although the observed d(33) values were lower than those of the LB films of NLO dyes due to very small dye densities of the silicalite films, this methodology bears a great potential to be developed into the methods for preparing practically viable NLO films.

Journal Article↗

Thermal hysteresis in the photoresponsivity of a langmuir film of amphiphilic spiropyran.

We have found a thermal hysteresis in the photoresponsivity of a Langmuir film for the first time. The Langmuir film of an amphiphilic spiropyran, 1',3'-dihydro-3',3'-dimethyl-6-nitro-1'-octadecyl-8-(docosanoyloxymethyl)spiro[2H-1-benzopyran-2,2'-(2H)-indole] (SP) was fabricated at 13 degrees C at 10 mN m-1, followed by heating to a given temperature. UV irradiation of this film caused only the isomerization of SP to the corresponding merocyanine (MC) up to 29 degrees C. Light-induced J-aggregation of MC occurred at 30 degrees C. On the other hand, once the film was heated to 30 degrees C, light-induced J-aggregation was observed down to 27 degrees C. The hysteresis should be related with the phase transitions that occur in the bulk of SP at similar temperatures. No significant morphological change occurred by light-induced J-aggregation in the Langmuir-Blodgett (LB) film of SP by the present method, in contrast to the case of the LB films fabricated under isothermal conditions at 30 degrees C. This feature enabled us to pattern the LB film with J-aggregate of MC by UV irradiation through a photomask of lines with a width of 5 mum each.

Journal Article↗

One-dimensional ion-conductive polymer films: alignment and fixation of ionic channels formed by self-organization of polymerizable columnar liquid crystals.

We have prepared two types of one-dimensional ion-conductive polymer films containing ion nanochannels that are both perpendicular and parallel to the film surface. These films have been obtained by photopolymerization of aligned columnar liquid crystals of a fan-shaped imidazolium salt having acrylate groups at the periphery. In the columnar structure, the ionic part self-assembles into the inner part of the column. The column is oriented macroscopically in two directions by different methods: orientation perpendicular to the modified surfaces of glass and indium tin oxide with 3-(aminopropyl)triethoxysilane and orientation parallel to a glass surface by mechanical shearing. Ionic conductivities have been measured for the films with columnar orientation vertical and parallel to the surface. Anisotropic ionic conductivities are observed for the oriented films fixed by photopolymerization. The ionic conductivities parallel to the columnar axis are higher than those perpendicular to the columnar axis because the lipophilic part functions as an ion-insulating part. The film with the columns oriented vertically to the surface shows an anisotropy of ionic conductivities higher than that of the film with the columns aligned parallel to the surface.

Crystallization↗

Silica-stabilized gold island films for transmission localized surface plasmon sensing.

Ultrathin gold films prepared by evaporation of sub-percolation layers (typically up to 10 nm nominal thickness) onto transparent substrates form arrays of well-defined metal islands. Such films display a characteristic surface plasmon (SP) absorption band, conveniently measured by transmission spectroscopy. The SP band intensity and position are sensitive to the film morphology (island shape and inter-island separation) and the effective dielectric constant of the surrounding medium. The latter has been exploited for chemical and biological sensing in the transmission localized surface plasmon resonance (T-LSPR) mode. A major concern in the development of T-LSPR sensors based on Au island films is instability, manifested as change in the SP absorbance following immersion in organic solvents and aqueous solutions. The latter may present a problem in the use of Au island-based transducers for biological sensing, usually carried out in aqueous media. Here, we describe a facile method for stabilizing Au island films while maintaining a high sensitivity of the SP absorbance to analyte binding. Stabilization is achieved by coating the Au islands with an ultrathin silica layer, ca. 1.5 nm thick, deposited by a sol-gel procedure on an intermediate mercaptosilane monolayer. The silica coating is prepared using a modified literature procedure, where a change in the reaction conditions from room temperature to 90 degrees C shortened the deposition time from days to hours. The system was characterized by UV-vis spectroscopy, ellipsometry, XPS, HRSEM, AFM, and cyclic voltammetry. The ultrathin silica coating stabilizes the optical properties of the Au island films toward immersion in water, phosphate buffer saline (PBS), and various organic solvents, thus providing proper conditions where the optical response is sensitive only to changes in the effective dielectric constant of the immediate environment. The silica layer is thin enough to afford high T-LSPR sensitivity, while the hydroxyl groups on its surface enable chemical modification for binding of receptor molecules. The use of silica-encapsulated Au island films as a stable and effective platform for T-LSPR sensing is demonstrated.

Journal Article↗

Degradation behavior of soy protein-wheat gluten films in simulated soil conditions.

Films containing soy protein and wheat gluten were exposed to simulated farmland soil mix over a period of 30 days and monitored for degradation. The simulated farmland soil mix (topsoil/sand/Sunshine compost/vermiculite, 59:6:25:10, wt %) was mixed and stored at ambient humidity (48-55%) and temperature (20-24 degrees C); the soil mix was constantly maintained at 15% moisture by weight. Research focused on evaluating the effectiveness of gluten and cysteine additions on biodegradable behavior in the simulated farmland soil conditions. The four types of films, soy protein (S:G 1:0); soy protein with cysteine addition (S:G 1:0 + CYS); soy protein-wheat gluten (S:G 4:1); and soy protein-wheat gluten with cysteine addition (S:G 4:1 + CYS), were prepared at pH 7. 0 for degradation studies. Soy protein-gluten film rapidly degraded with 50% weight loss in about 10 days and with up to 95% weight loss in 30 days. Tensile strength and elongation of all soy protein-gluten films significantly decreased in 3 days. However, cysteine addition delayed the degradation rate of soy protein-gluten films. Soy protein-wheat gluten film disintegrated after 20 days in the simulated farmland soil environment. These results suggest that wheat gluten and cysteine addition to soy protein-based films could delay degradation rates due to their high disulfide contents.

Glutens↗

Drying temperature effect on water vapor permeability and mechanical properties of whey protein-lipid emulsion films.

The water vapor permeability (WVP) and mechanical properties of whey protein isolate (WPI) and WPI-lipid emulsion films dried at different conditions were investigated. As drying temperature increased, WVPs decreased significantly. Significantly lower WVP was observed for emulsion films compared to WPI films. WPI-Beeswax (BW) and WPI-anhydrous milkfat fraction emulsion films dried at 80 degrees C and 40% RH gave the lowest WVP compared to 25 degrees C, 40% RH and 40 degrees C, 40% RH. A large drop in WVP of WPI-BW emulsion films was observed at 20% BW content. The decrease in WVP for emulsion films as drying temperature increased could be due to change in the lipid crystalline morphology and/or lipid distribution within the matrix. Mechanical properties of WPI and WPI-lipid emulsion films, on the other hand, were not modified by drying conditions.

Chemical Phenomena↗

Oxygen permeability and mechanical properties of films from hydrolyzed whey protein.

The effects of whey protein hydrolysis on film oxygen permeability (OP) and mechanical properties at several glycerol-plasticizer levels were studied. Both 5.5% and 10% degree of hydrolysis (DH) whey protein isolate (WPI) had significant effect (p </= 0.05) on film tensile properties compared to unhydrolyzed WPI. Hydrolyzed WPI required less glycerol to achieve the same mechanical properties compared to those of unhydrolyzed WPI. Little or no significant difference (p > 0.05) occurred for film OP between unhydrolyzed WPI, 5.5% DH WPI, and 10% DH WPI films at the same glycerol content. Hydrolyzed WPI films of mechanical properties similar to those of WPI films had better oxygen barrier. Therefore, use of hydrolyzed WPI allowed achievement of desired film flexibility with less glycerol and with smaller increase in OP.

Hydrolysis↗

Aging of whey protein films and the effect on mechanical and barrier properties.

This work focuses on the aging of whey protein isolate (WPI) films plasticized with glycerol (G) and sorbitol (S). The films were cast from heated aqueous solutions at pH 7 and dried at 23 degrees C and 50% relative humidity (RH) for 16 h. They were stored in a climate room (23 degrees C, 50% RH) for 120 days, and the film properties were measured at regular intervals. The moisture content (MC) of the WPI/G films decreased from 22% (2 days) to 15% (45 days) and was thereafter constant at 15% (up to 120 days). This affected the mechanical properties and caused an increased stress at break (from 2.7 to 8.3 MPa), a decreased strain at break (from 33 to 4%), and an increased glass transition temperature (T(g)) (from -56 to -45 degrees C). The barrier properties were, however, unaffected, with constant water vapor permeability and a uniform film thickness. The MC of the WPI/S films was constant at approximately 9%, which gave no change in film properties.

Glycerol↗

Plasticizer effect on oxygen permeability of beta-lactoglobulin films.

Plasticizer effect on oxygen permeability (OP) of beta-lactoglobulin (beta-Lg) films was studied. Propylene glycol (PG), glycerol (Gly), sorbitol (Sor), sucrose (Suc), and polyethylene glycol at MW 200 and 400 (PEG 200 and PEG 400, respectively) were studied due to their differences in composition, shape, and size. Suc-plasticized beta-Lg films gave the best oxygen barrier (OP < 0.05 cm3 x microm/m2 x day x kPa). Gly- and PG-plasticized films had similar OP values, and both had higher OP than Sor-plasticized films. PEG 200- and PEG 400-plasticized films were the poorest oxygen barriers. Empirical equations including plasticizer efficiencies for OP were employed to elucidate the relationships between OP of plasticized beta-Lg films and plasticizer type and content. Plasticizer efficiency ratios between mechanical and OP properties of beta-Lg films show the relative efficiency of plasticizers in modifying mechanical and OP properties. A large ratio is desirable.

Food Preservation↗

Effects of lamination and coating with drying oils on tensile and barrier properties of zein films.

Zein films plasticized with oleic acid have been considered potentially useful for biodegradable packaging applications. However, moisture was found to affect their tensile and gas barrier properties. We investigated the effects of two converting processes, fusion lamination and coating with drying oils, on tensile properties and gas permeability of zein films. Zein films were laminated to 4-ply sheets in a Carver press and coated with tung oil, linseed oil, or a mixture of tung and soybean oils. Tensile properties and permeability to water vapor, oxygen, and carbon dioxide were measured according to ASTM methods. Laminated films were clearer, tougher, and more flexible, and had a smoother finish than nontreated sheets. Lamination decreased O(2) and CO(2) permeability by filling in voids and pinholes in the film structure. Coating increased tensile strength and elongation and decreased water vapor permeability. Coatings acted as a composite layer preventing crack propagation and increasing film strength. They also formed a highly hydrophobic surface that prevented film wetting.

Biofilms↗

Permeation of oxygen, water vapor, and limonene through printed and unprinted biaxially oriented polypropylene films.

Oriented polypropylene (OPP) and coated OPP (acrylic/OPP/PVDC) films were printed with two commercially available inks to investigate the influence of inks on water vapor and oxygen transmission rates. The permeation of an aroma compound (d-limonene) through coated OPP film printed with these inks was also evaluated at 35 degrees C and 100% relative humidity. The water vapor transmission rate increased significantly through OPP film printed with nitrocellulose-based ink. The oxygen transmission rate was significantly lower through both OPP and coated OPP films printed with the nitrocellulose ink. The effect of inks on limonene permeation was minor compared to the marked increase in permeation measured when the PVDC side of the coated film was exposed to the aroma, compared to the acrylic side. Scanning electron micrographs of coated film cross sections revealed changes in film structure upon exposure to limonene vapors, which were most pronounced when the PVDC side was exposed to limonene.

Biofilms↗

Drying temperature and relative humidity effects on wheat gluten film properties.

The mechanical and physical properties of glycerol-plasticized wheat gluten films dried at different temperatures (20, 50, and 80 degrees C) and relative humidities (35 and 70% RH) were investigated. Dispersion of wheat gluten was prepared at pH 11 in aqueous solution. Films were obtained by casting the wheat gluten suspension, followed by solvent evaporation in a temperature and relative humidity controlled chamber. Decreasing relative humidity altered most of the mechanical properties. At 35% RH, tensile strength increased when drying temperature increased. However, at 70% RH, tensile strength decreased when temperature increased. Thickness of the films decreased by increasing temperature. Hypothetical coating strength increased with increasing drying temperature at 35% RH. However, at 70% RH, a maximum value was observed at 50 degrees C. Films produced at 80 degrees C exhibited low solubility in aqueous solution. Addition of 1.5% (w/v) sodium dodecyl sulfate increased solubility of all of the films except the film dried at 50 degrees C and 70% RH. Overall, drying temperature and relative humidity affected mechanical and physical properties of the wheat gluten films. However, the effect of drying temperature was more pronounced than the effect of relative humidity.

Chemical Phenomena↗

Development and characterization of films based on chemically cross-linked gliadins.

The aim of the present work has been to study the possibility of obtaining modified gliadin films with improved water resistance and mechanical properties by means of promoting intermolecular covalent bonds between polypeptide chains. Prior to casting films, formaldehyde, glutaraldehyde, and glyoxal were used to cross-link proteins at concentrations ranging from 1% to 4% (grams per 100 g of protein). Mechanical properties (tensile strength and elongation at break), water vapor permeability, moisture sorption isotherms, and optical properties of the films produced were evaluated as a function of the cross-linker used. Experimental results showed that some properties of gliadin films were considerably modified. Cross-linking improved the water resistance of films, avoiding their disintegration. Their water barrier properties were also enhanced, but their moisture sorption properties remained unchanged. Formaldehyde imparted greater mechanical strength to films than glutaraldehyde or glyoxal, increasing tensile strength values 10-fold. Addition of the cross-linkers at concentrations in excess of 2.5% did not further improve the mechanical or barrier properties. However, modification with glutaraldehyde or glyoxal imparted an increasingly yellowish tint to the films.

Adsorption↗

Formation of Sterilized Edible Films Based on Caseinates: Effects of Calcium and Plasticizers.

gamma-Irradiation was used to produce free-standing sterilized edible films based on caseinate. The effects of calcium ions (Ca(2+)) and two plasticizers, namely propylene glycol (PG) and triethylene glycol (TEG), were investigated, as was the effect of the irradiation on both the gel formation and mechanical properties of the resulting films. gamma-Irradiation provoked formation of bityrosine, i.e., cross-links, accounting for the increase of the puncture strength of films. The presence of PG or TEG enhanced the formation of cross-links, leading to an improved mechanical strength of films. TEG was found to interact more favorably with the caseinate than PG, being responsible for the improved film extensibility. Addition of Ca(2+) caused the formation of gels. The breaking strength of gels was directly related to the concentration of Ca(2+), while the puncture strength of films was found to be almost independent of the calcium concentration. Moreover, a high irradiation dose seemed to affect the protein structure, accounting for the decrease of the breaking strength of gels and for the depreciation of the mechanical behavior of films.

Journal Article↗

Solution and film properties of sodium caseinate/glycerol and sodium caseinate/polyethylene glycol edible coating systems.

The aim of this study is to determine the effects of plasticizer hydrogen bonding capability and chain length on the molecular structure of sodium caseinate (NaCAS), in NaCAS/glycerol and NaCAS/polyethylene glycol 400 (PEG) systems. Both solution and film phases were investigated. Glycerol and PEG reduced the viscosity of aqueous NaCAS, with the latter having a greater effect. This was explained in terms of protein/plasticizer aggregate size and changes to the conformation of the caseinate chain. In the film phase, glycerol caused more pronounced changes to the film tensile strength compared with PEG. However, the effect of glycerol on film water vapor permeability was smaller. These observations are attributed to the differences in plasticizer size and hydrogen bonding strength that controls the protein-plasticizer and protein-protein interactions in the films. Glass transition calculations from the tensile strength data indicate that the distribution of bonding interactions is more homogeneous in NaCAS/PEG films than in NaCAS/glycerol films.

Caseins↗

Optical modeling of nanocrystalline TiO2 films.

The light transmittance, T, in nanocrystalline TiO2 films was studied as a function of the light wavelength, lambda, the nanocrystal radius, a, and the film thickness, d. Two types of TiO2 nanoparticles were employed: a commercial powder (P25) and synthesized particles from titanium isopropoxide (SP). The X-ray diffraction measurements revealed that both P25 and SP are mainly anatase and the average crystal sizes, 2a, of P25 and SP are 50.3 and 23.7 nm, respectively. Despite the visual difference between micron-order thin films of P25 and SP, the light hemispherical transmittance corrected with the surface specular reflectance has a clear dependence of ln(T) = -0.5beta lambda(-4)a(3)d, with beta = 1.5 x 10(3) from visible to near-infrared wavelengths. The dependence and beta value were successfully explained by the simplest model on the basis of the Rayleigh scattering theory. This indicates that the nanocrystalline TiO2 thin films are a typical medium where the simplest scattering model is a good approximation. However, the model was inapplicable to light scattering in relatively thick P25 films of 1.5-3.0 microm because of nonnegligible internal multiple scattering. For the moderate thickness films, ln(T) proportional to lambda(gamma), where gamma increases from -4 in proportion to the film thickness is an alternative approximation. With these light scattering models, the light absorption rate of the TiO2 crystal was successfully evaluated from experimental extinction rates.

Journal Article↗