Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Equilibrium optimization”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81Linked to original sources
PubMed2006

Rat butyrylcholinesterase-catalysed hydrolysis of N-alkyl homologues of benzoylcholine.

The purpose of this work was to study the catalytic properties of rat butyrylcholinesterase with benzoylcholine (BzCh) and N-alkyl derivatives of BzCh (BCHn) as substrates. Complex hysteretic behaviour was observed in the approach to steady-state kinetics for each ester. Hysteresis consisted of a long lag phase with damped oscillation. The presence of a long lag phase, with no oscillations, in substrate hydrolysis by rat butyrylcholinesterase was also observed with N-methylindoxyl acetate as substrate. Hysteretic behaviour was explained by the existence of two interconvertible butyrylcholinesterase forms in slow equilibrium, while just one of them is catalytically active. The damped oscillations were explained by the existence of different substrate conformational states and/or aggregates (micelles) in slow equilibrium. Different substrate conformational states were confirmed by 1H-NMR. The K(m) values for substrates decreased as the length of the alkyl chain increased. High affinity of the enzyme for the longest alkyl chain length substrates was explained by multiple hydrophobic interactions of the alkyl chain with amino acid residues lining the active site gorge. Molecular modelling studies supported this interpretation; docking energy decreased as the length of the alkyl chain increased. The long-chain substrates had reduced k(cat) values. Docking studies showed that long-chain substrates were not optimally oriented in the active site for catalysis, thus explaining the slow rate of hydrolysis. The hydrolytic rate of BCH12 and longer alkyl chain esters vs. substrate concentration showed a premature plateau far below V(max). This was due to the loss of substrate availability. The best substrates for rat butyrylcholinesterase were short alkyl homologues, BzCh - BCH4.

Animals↗
PubMed2005

[High throughput screening of pharmacokinetics and metabolism in drug discovery (I)--establishment of assessment system for absorption to compounds with a wide diversity of physical properties].

The application of combinatorial chemistry and high-throughput screening to biological targets has led to efficient identification of lead compounds in wide therapeutic areas. However, the physicochemical properties of some lead compounds are lipophilic with low water soluble. Since these parameters determine in vivo absorption, we established robust screening methods for solubility and Caco-2 membrane permeability which are applicable to our screening strategy based on the structure-pharmacokinetic parameter relationship (SPR). Of test compounds with different core structures, turbidimetric solubility and apparent solubility as determined by HPLC-UV analysis after dilution of aqueous media from DMSO stock solution was overestimated in comparison with the corresponding thermodynamic solubility obtained using a traditional shake-flask method. A new powder-dissolution method providing thermodynamic solubility similar to that in the traditional method was developed using 96-well plates for equilibrium dialysis. The throughput of the method was the almost the same as that using the apparent solubility method. In a conventional Caco-2 assay, membrane permeability (P(app)) of some lipophilic compounds was underestimated due to low solubility in the apical site and adhesion to the device, resulting in a poor relationship between the in vivo absorption fraction and the P(app) values. The addition of 0.1% Gelucire 44/14 into the apical site and 4% bovine serum albumin into the basolateral site improved the relationship. These newly developed methods are therefore useful to optimize lead compounds with less water solubility and high lipophilicity on the basis of SPR.

Animals↗
PubMed1985

Migration efficiency ratios and the optimal distribution of population.

The authors present a theoretical description of the migration process and criticize the conventional interpretation of the migration efficiency ratio, which is defined as the ratio of the net number of moves of individuals between areas to the gross number of moves that take place. "The conventional interpretation of the migration efficiency ratio is that the closer it lies to zero the less efficient the migration process....However, [the authors] feel that this is a somewhat misleading conception of the notion of efficiency in migration in that it emphasizes the physical efficiency of the migration process rather than focusing on the contribution of migration to a socially efficient allocation of population. Thus, to redirect attention, [they] have chosen to judge migration efficiency on the basis of its contribution to producing an equilibrium population distribution." The focus is on internal migration.

Demography↗
PubMed1996

Analysis and biochemistry of blood folate.

Although the analysis of low plasma concentrations of 5-methyltetrahydrofolate by several specific HPLC methods has been reported, considerably fewer routine chromatographic techniques exist for the analysis of specific folate coenzymes in the erythrocyte where a nonspecific bioassay indicates that the vitamin achieves a level 10 times higher than that in plasma. By using three separate folypolyglutamate deconjugation procedures and combining an extraction technique which adequately preserves all native folate coenzymes with an HPLC technique utilizing fluorescence, diode array, and off-line radioassay detection capable of resolving all crucial native folates in their monoglutamyl forms, we were unable to demonstrate levels of 5-methyltetrahydrofolate in whole blood hemolysate beyond what might be expected from the plasma component. While the exact nature of erythrocyte folate could not be ascertained, we provide evidence that a proportion of it may exist at the formyl level of oxidation. The complex pH and enzymatic interrelationship between folate coenzymes at the formyl oxidation level is discussed in terms of our extraction technique and findings, as well as in a broader biological context. This paper also describes a simple acid precipitation technique for measuring plasma 5-methyltetrahydrofolate, as well as providing comprehensive data on the chromatographic behavior of all the folylmonoglutamates in reversed-phase and weak anion-exchange modes, including useful spectral data for optimizing detection parameters and identifying individual coenzymes. 10-Formyltetrahydrofolate and 5-methyltetrahydrofolate are the two most important one-carbon-substituted folate coenzymes. 10-Formyltetrahydrofolate is unavailable commercially, probably due to its instability. We chart the chemical synthesis of this important coenzyme and show that it and what is thought to be 5,10-hydroxymethylenetetrahydrofolate are actually minor products compared to the parent 5,10-methenyltetrahydrofolate and the ultimate reaction product, 5-formyltetrahydrofolate. Since intraerythrocyte folate binds to a specific hemoglobin site, we ascertained the total number of binding sites on hemoglobin (Bmax) and the equilibrium dissociation constant (Kd) for 5-methyltetrahydrofolate, 5-formyltetrahydrofolate, and the antimetabolite methotrexate. Binding affinities were consistent with a low-affinity, low-capacity interaction for all three. It was demonstrated that hemoglobin has a greater affinity for 5-methyltetrahydrofolate than for the other folate derivatives (Kd = 1.2 x 10(-3) M), while rather surprisingly, methotrexate had a higher affinity for hemoglobin than did 5-formyltetrahydrofolate (Kd = 2.5 x 10(-3) and 3.7 x 10(-2) M, respectively.

Binding Sites↗
PubMed2001

Calculation of ensembles of structures representing the unfolded state of an SH3 domain.

The N-terminal SH3 domain of drk (drkN SH3 domain) exists in equilibrium between a folded (F(exch)) and an unfolded (U(exch)) form under non-denaturing conditions. In order to further our previous descriptions of the U(exch) state, we have developed a protocol for calculating ensembles of structures, based on experimental spectroscopic data, which broadly represent the unfolded state. A large number of unfolding trajectories were generated, starting from the folded state structure of the protein, in order to provide a reasonable sampling of the conformational space accessible to this sequence. Unfolded state ensembles have been "calculated" using a newly developed program ENSEMBLE, which optimizes the population weights assigned to each structure based on experimental properties of the U(exch) state. Pseudo-energy terms for nuclear Overhauser effects, J-coupling constants, (13)C chemical shifts, translational diffusion coefficients and tryptophan ring burial based on NMR and fluorescence data have been implemented. The population weight assignment procedure was performed for different starting ensembles. Small numbers of structures (<60) dominate the final ensembles compared to the total number in the starting ensembles, suggesting that the drkN SH3 domain U(exch) state can be described by a limited number of lower-energy conformations. The calculated U(exch) state ensembles are much more compact than a "random coil" chain, with significant native-like residual structure observed. In particular, a sizable population of conformers having the n-src loop and distal beta-hairpin structures exist in the calculated U(exch) state ensembles, and Trp36 is involved in a large number of interactions, both native and non-native.

Animals↗
PubMed2004

The use of laboratory-determined ion exchange parameters in the predictive modelling of field-scale major cation migration in groundwater over a 40-year period.

An attempt has been made to estimate quantitatively cation concentration changes as estuary water invades a Triassic Sandstone aquifer in northwest England. Cation exchange capacities and selectivity coefficients for Na(+), K(+), Ca(2+), and Mg(2+) were measured in the laboratory using standard techniques. Selectivity coefficients were also determined using a method involving optimized back-calculation from flushing experiments, thus permitting better representation of field conditions; in all cases, the Gaines-Thomas/constant cation exchange capacity (CEC) model was found to be a reasonable, though not perfect, first description. The exchange parameters interpreted from the laboratory experiments were used in a one-dimensional reactive transport mixing cell model, and predictions compared with field pumping well data (Cl and hardness spanning a period of around 40 years, and full major ion analyses in approximately 1980). The concentration patterns predicted using Gaines-Thomas exchange with calcite equilibrium were similar to the observed patterns, but the concentrations of the divalent ions were significantly overestimated, as were 1980 sulphate concentrations, and 1980 alkalinity concentrations were underestimated. Including representation of sulphate reduction in the estuarine alluvium failed to replicate 1980 HCO(3) and pH values. However, by including partial CO(2) degassing following sulphate reduction, a process for which there is 34S and 18O evidence from a previous study, a good match for SO(4), HCO(3), and pH was attained. Using this modified estuary water and averaged values from the laboratory ion exchange parameter determinations, good predictions for the field cation data were obtained. It is concluded that the Gaines-Thomas/constant exchange capacity model with averaged parameter values can be used successfully in ion exchange predictions in this aquifer at a regional scale and over extended time scales, despite the numerous assumptions inherent in the approach; this has also been found to be the case in the few other published studies of regional ion exchanging flow.

Forecasting↗
PubMed2002

Removal of Cr6 + and Ni2+ from aqueous solution using bagasse and fly ash.

Raw bagasse and fly ash, the waste generated in sugar mills and boilers respectively have been used as low-cost potential adsorbents. Raw bagasse was pretreated with 0.1N NaOH followed by 0.1N CH3COOH before its application. These low-cost adsorbents were used for the removal of chromium and nickel from an aqueous solution. The kinetics of adsorption and extent of adsorption at equilibrium are dependent on the physical and chemical characteristics of the adsorbent, adsorbate and experimental system. The effect of hydrogen ion concentration, contact time, sorbent dose, initial concentrations of adsorbate and adsorbent and particle size on the uptake of chromium and nickel were studied in batch experiments. The Sorption data has been correlated with Langmuir, Freundlich and Bhattacharya and Venkobachar adsorption models. The efficiencies of adsorbent materials for the removal of Cr(VI) and Ni(II) were found to be between 56.2 and 96.2% and 83.6 and 100%, respectively. These results were obtained at the optimized conditions of pH, contact time, sorbent dose, sorbate concentration of 100 mg/l and with the variation of adsorbent particles size between 0.075 and 4.75 mm. The order of selectivity is powdered activated carbon > bagasse > fly ash for Cr(VI) removal and powdered activated carbon > fly ash > bagasse for Ni(II) removal.

Carbon↗
PubMed2003

Effects of temperature, inoculum size and starch hydrolyzate concentration on butanediol production by Bacillus licheniformis.

An optimization study has been performed on 2,3-butanediol production by Bacillus licheniformis NCIMB 8059 from different carbon sources (glucose, sucrose and cornstarch hydrolyzate), alternately varying temperature (34<T<40 degrees C), inoculum size (0.5<X(0)<10 gl(-1)), and starting substrate concentration (20<S(0)<70 gl(-1)). The results of average volumetric productivity obtained from tests at variable temperature have been worked out according to Arrhenius to estimate the thermodynamic parameters of both 2,3-butanediol formation (Deltah(*)=69.5 kJ mol(-1); Deltas(*)=-0.12 kJ mol(-1)K(-1)) and thermal inactivation equilibrium (Deltah( composite function )(D)=179 kJ mol(-1); Deltas( composite function )(D)=0.73 kJ mol(-1)K(-1)). The highest butanediol yield on starting glucose (Y=0.87 mol x mol(-1)) and average diol plus acetoin productivity (nu(av)=0.58 gl(-1)h(-1)) were obtained on cornstarch hydrolyzate at T=37 degrees C, pH 6.0, X(0)=10 gl(-1); S(0)=30 gl(-1) which suggests some stimulation in this raw material of the fermentative metabolism of B. licheniformis. Therefore, cornstarch hydrolyzate can be proposed as an alternative carbon source for industrial production of 2,3-butanediol with no need for growth factor addition.

Bacillus↗
PubMed2001

A method for determination of ion distribution within electrosprayed droplets.

A simplified method for determination of ion distribution within electrospray ionization droplets has been developed. The method is based on an electrospray ionization mass spectrometry equilibrium partitioning model recently developed by Enke (Enke, C. G. Anal. Chem. 1997, 69, 4885-4893). This "simple" method required only two samples to be analyzed at each solution composition compared to the method previously reported. Furthermore, as the same m/z value is monitored in both experiments, possible effects of the mass-dependent ion transmission in the quadrupole were eliminated. Tetra-alkylammonium compounds with variable hydrophobicity were used as model compounds and the effect of methanol-water composition in the electrosprayed solution was studied. It was found, as expected, that the signal optimized at a high content of methanol in the electrosprayed solution. The distribution coefficient for analyte ions between the droplet surface and bulk solution maximize, however, at a lower content of methanol in the electrosprayed solution.

Journal Article↗
PubMedDate not supplied

Blends of poly-(epsilon-caprolactone) and polysaccharides in tissue engineering applications.

Bioartificial blends of poly-(epsilon-caprolactone) (PCL) with a polysaccharide (starch, S; dextran, D; or gellan, G) (PCL/S, PCL/D, PCL/G 90.9/9.1 wt ratio) were prepared by a solution-precipitation technique and widely characterized by differential scanning calorimetry analysis (DSC), Fourier transform infrared-attenuated total reflectance spectroscopy (FTIR-ATR), optical microscopy (OM), wide-angle X-ray diffraction analysis (WAXD), and thermogravimetry (TGA). DSC showed that the polysaccharide reduced the crystallinity of PCL and had a nucleation effect, which was also confirmed by OM analysis. Hoffman-Weeks analysis was performed on PCL and blend samples allowing calculation of their equilibrium melting temperatures (). WAXD showed that the crystalline unit cell type was the same for PCL and blends. FTIR-ATR did not evidence interactions between blend components. Thermal stability was affected by the type of polysaccharide. Microparticles (<125 microm) were produced from blends by cryogenical milling and characterized by scanning electron microscopy analysis (SEM). Selective laser sintering (SLS), a new rapid prototyping technology for scaffold fabrication, was applied to sinter blend microparticles according to a PC-designed two-dimensional geometry (strips and 2 x 2 mm(2) square-meshed grids). The optimal experimental conditions for sintering were established and laser beam parameters (beam speed, BS, and power, P) were found for each blend composition. Morphology of sintered objects was analyzed by SEM and found to be dependent on the morphology of the sintered powders. Sintered samples were analyzed by chemical imaging (CI), FTIR-ATR, DSC, and contact angle analysis. No evidence of the occurrence of degradation phenomena was found by FTIR-ATR for sintered samples, whereas DSC parameters of PCL and blends showed changes which could be attributed to some molecular weight decrease of PCL during sintering. CI of sintered samples showed that the polysaccharide phase was homogeneously dispersed within the PCL matrix, with the only exception being the PCL/D blend. The contact angle analysis showed that all samples were hydrophilic. Fibroblasts were then seeded on scaffolds to evaluate the rate and the extent of cell adhesion and the effect of the polysaccharides (S, D, G) on the bioactivity of the PCL-based blends.

Animals↗
PubMed1984

Measurement of brain pH using 11CO2 and positron emission tomography.

We have examined the feasibility of measuring local brain pH in vivo with 11CO2 and positron emission tomography. In particular, we have addressed two objections that have been raised against this method: the assumed need to estimate local tissue PCO2 and the rapid fixation of 11C in tissue. From a reexamination of the basic theory, we argue that after administration of 11CO2 the time-dependent distribution of 11C between tissue and blood is independent of the distribution of CO2 already in the body, making it unnecessary to estimate local tissue PCO2. Assuming that the blood--brain barrier is impermeable to bicarbonate ions, there will be equal partial pressures of 11CO2 in blood and tissue at equilibrium. To overcome the problem of fixation in the tissue we have developed a kinetic model of the time-dependent distribution of 11C that accounts for regional variations in blood flow, CO2 extraction, pH, and rate of fixation. The values of the model parameters can be estimated from sequential measurements of tissue activity concentration during administration of 11CO2. Tissue pH can then be calculated from one of the parameter values, a measurement of arterial pH, and known constants. Numerical calculations based on the kinetic model with assumed values of the parameters were used to optimize the experimental design. The calculations show that problems with fixation are much less severe with continuous infusion of activity than with bolus administration. During infusion the tissue curve depends strongly on tissue pH but only weakly on the rate of fixation.(ABSTRACT TRUNCATED AT 250 WORDS)

Brain↗
PubMed1978

Syncatalytic conformational changes in aspartate aminotransferase determined by hydrogen-deuterium exchange.

Catalysis-linked conformational transitions of aspartate aminotransferase (cytosolic isoenzyme from pig heart; L-aspartate:2-oxoglutarate aminotransferase, EC 2.6.1.1) have been probed by infrared spectrophotometric measurement of hydrogen-deuterium exchange. In the unliganded pyridoxal form of the enzyme at pH 6.0 and 20 degrees, 43% of the total 411 peptide hydrogens per subunit exchange within the first 10 min. An additional 9% exchange slowly in the following time period to 360 min. A quite similar exchange curve is obtained with the pyridoxamine form of the enzyme, indicating close correspondence in conformation of both unliganded forms of the enzyme. Formation of a nonproductive adsorption complex of the pyridoxal enzyme with 2-oxoglutarate or of the pyridoxamine enzyme with glutamate alters the exchange characteristics only slightly. In contrast, the formation of an equilibrium mixture of the covalent transamination intermediates, which occurs in the silultaneous presence of the amino acid and the keto acid substrate, results in a marked retardation of hydrogen exchange, reflecting a substantial tightening of the structure of the enzyme. The exchange reactions of at least 26 peptide hydrogens per subunit (6% of the total) are retarded by a factor of 6 on the average. The occurrence of such syncatalytic conformational changes reflects energetic coupling of the covalency changes at the active site with conformational changes of the macromolecular protein matrix that may contribute to optimizing the free energy profile of enzymic transamination.

Animals↗
PubMed1981

Manganese effects on gluconeogenesis.

Manganese (Mn2+) does not significantly increase gluconeogenesis from lactate (10 mM) plus pyruvate (1 mM) in hepatocytes from fasted rats. In hepatocytes not treated with Mn2+, glucagon (1 microM) and epinephrine (10 microM) at these optimal concentrations both stimulate gluconeogenesis from lactate/pyruvate (10:1), but the hormonal effects are not additive. In the presence of Mn2+ the hormonal effects are slightly larger, and the effects of glucagon (1 microM) and epinephrine (10 microM) become nearly completely additive. Mn2+ increases the specific activity of glucose formed from lactate plus NaH14CO3 by nearly 20%. The increase may be attributed to an increased exchange reaction of either pyruvate carboxylase or phosphoenolypyruvate carboxykinase, suggesting that one of these may be markedly stimulated by Mn2+, the increased exchange reaction possibly signifying an approach toward "near equilibrium" status.

Animals↗
PubMed2006

Sorption of chromium(VI) from aqueous solution by cassava (Manihot sculenta Cranz.) waste biomass.

The sorption of highly toxic Cr(VI) ions by cassava waste biomass was quantitatively investigated. The sorption was found to be influenced by several physico-chemical factors such as agitation speed, temperature, contact time, pH, and sorbent/sorbate ratio. The adsorption data at equilibrium were fitted to Freundlich and Langmuir isotherms. The monolayer sorption capacity was found to be 61.79 mg of Cr(VI) per gram of biomass. The kinetics of Cr(VI) adsorption to pure cassava-tuber-bark wastes were determined based on a pseudo-second-order-rate model using the batch-sorption technique at a temperature of 30 degrees. The kinetics data suggest that the adsorption process is exothermic, and that the rate-limiting step is physisorption. Negative DeltaG(ads) values indicate that the adsorption is spontaneous and exothermic in nature. Also, under optimal conditions (in agitated 1M H(2)SO(4) at 30 degrees), the cassava waste biomass appears to be recyclable.

Absorption↗
PubMed1996

The selectivity for K+ versus Na+ in DNA quadruplexes is dominated by relative free energies of hydration: a thermodynamic analysis by 1H NMR.

We have studied the competition between Na+ and K+ for coordination by G quartets using the oligonucleotide d(G3T4G3) as a model system. d(G3T4G3) forms a dimeric foldback structure containing three G quartets in the presence of either NaCl or KCl. Proton chemical shifts, which are particular to the species of coordinated ion, have been used to monitor the conversion between the sodium and potassium forms under equilibrium conditions. Analysis of titration experiments indicates that at least two K+ are coordinated by the three quartets of the dimeric molecule, and perfect fits of the data are obtained for two Na+ being displaced by two K+. Our results also indicate that the conversion of [d(G3T4G3)]2 from the sodium to the potassium form is associated with a net free energy change (delta G degrees) of -1.7 +/- 0.15 kcal/mol. It has long been suggested that the greater thermal stability of DNA quadruplex structures in the presence of K+ is primarily a result of the optimal fit of this ion in the coordination sites formed by G quartets. However, a consideration of the relatively small change in free energy associated with the conversion from the sodium to the potassium form and the relatively large difference between the free energy of hydration for Na+ and K+ indicates that this cannot be correct. Rather, the preferred coordination of K+ over Na+ is actually driven by the greater energetic cost of Na+ dehydration with respect to K+ dehydration.

DNA↗
PubMed2004

Mechanism of europium retention by calcium silicate hydrates: an EXAFS study.

The uptake of Eu by calcium silicate hydrate (C-S-H) phases as a function of Eu/sorbate ratio (from 37 to 450 micromol g(-1) C-S-H), C-S-H Ca/Si mole ratio (1.3, 1.0, and 0.7), and initial supersaturating conditions was probed by solution kinetics experiments and extended X-ray absorption fine structure (EXAFS) spectroscopy, to shed light on the retention mechanism of trivalent radionuclides under waste repository conditions. The rates of Eu (9.7 x 10(-10) M) uptake in C-S-H suspensions and in solutions at equilibrium with C-S-H were rapid. Uptake of more than 90% of dissolved Eu was generally observed within 15 min. Europium LIII-edge EXAFS spectra collected on samples of Eu sorbed on, or coprecipitated in, C-S-H differed from that of Eu(OH)3(s) expected to precipitate under the pH conditions of C-S-H waters, ruling out compelling precipitation of pure hydroxide phases. Fourier transforms for EXAFS spectra for Eu in sorption/coprecipitation samples displayed comparable features at distances typical of neighboring cationic shells, pointing to similar crystallochemical environments. Optimal spectral simulations were obtained by assuming the presence of Si, Si/Ca, and Ca cationic shells surrounding Eu at distances of 3.2, 3.7-3.8, and 3.8-3.9 A, respectively. The nearly continuous distribution of (Si, Ca) backscattering shells parallels the distribution in Ca-(Ca, Si) interatomic distances in structural models of C-S-H. Discernible effects of experimental parameters on the Eu local environment were observed by comparison of Fourier transforms, but could not be confirmed by EXAFS quantitative analysis. These results indicate that sorbed or coprecipitated Eu is located at Ca structural sites in a C-S-H-like environment. Kinetics and spectroscopic results are consistent with either Eu diffusion within C-S-H particles or precipitation of Eu with Ca and Si creating a C-S-H-like solid phase.

Absorptiometry, Photon↗
PubMed2006

Evaluation of efficiency of reference potential spatial warping algorithm in conformational sampling of peptides.

Molecular dynamics (MD) simulation using the reference potential spatial warping algorithm (REPSWA) is a promising method for computing the conformational equilibrium of a system with a rugged energy surface. Its effectiveness has previously been demonstrated using only a simplified model system of a hydrocarbon chain omitting nonbonded interaction terms from the potential energy function. To evaluate the applicability of REPSWA MD simulation to more realistic problems, we applied it to small peptide systems in an aqueous environment. Difficulties were encountered, however, forcing us to devise several modifications. We investigated their effectiveness in comparison to conventional constant-temperature and multicanonical MD simulations. We found that the sampling efficiency of the modified REPSWA MD after a careful optimization of its parameters was better than that of the constant-temperature MD and comparable to that of the multicanonical MD in several cases.

Alanine↗
PubMed1987

The decisive pO2-levels in haloalkane-mediated liver cell injury.

The model hepatotoxin carbon tetrachloride (CCl4) was used to study haloalkane free radical-induced lipid peroxidation in isolated rat hepatocytes at steady state oxygen partial pressures (pO2) between 0.2 and 100 mmHg. Equilibrium oxygen conditions were achieved by using an oxystat system. Monitoring of hepatocellular oxygen uptake, malondialdehyde-formation and low-level chemiluminescence during incubations of CCl4-supplemented hepatocytes indicated a drastic stimulation of lipid peroxidation at pO2-levels between 1 and 10 mmHg. Above and below this pO2-region the potency of CCl4 to induce lipid peroxidation sharply decreased. The evaluation of cellular damages by determining trypan blue exclusion and lactate dehydrogenase leakage revealed that in the presence of CCl4 hepatocellular injury was significantly increased at those pO2-levels which were optimal for CCl4-mediated lipid peroxidation. The present results demonstrate that CCl4 is a potent inducer of lipid peroxidation also in the intact hepatocyte, provided that the pO2 is maintained at distinct low levels. The coincidence of lipid peroxidation and loss of cell viability at the same pO2-range provides further evidence for the assumption that the haloalkane-mediated liver cell injury is due to a peroxidative process which primarily occurs at the hypoxic end of the physiological pO2-levels (1-70 mmHg) in liver.

Animals↗