Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “DIMETHYLFORMAMIDE”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81Linked to original sources
PubMed2005

Synthesis of ferrocene-grafted poly(p-phenylene-ethynylenes) and control of electrochemical behaviors of their thin films.

New ferrocene-coated poly(p-phenylene-ethynylenes) (PPEs) with end capping groups of protected thiol were prepared by a palladium-catalyzed Sonogashira coupling reaction. Ferrocene groups were covalently attached to polymers A and B through ethylene oxide tethers and to polymer C through methylene tethers. Polymers A and B are soluble in common solvents such as tetrahydrofuran (THF), chloroform, methylene chloride, acetone, dimethylformamide (DMF), and dimethyl sulfoxide (DMSO), and polymer C is soluble in toluene, THF, chloroform, and methylene chloride. Polymers A-C display low quantum yield, caused by electron-transfer quenching of ferrocene groups as electron donors. The polymer thin films were prepared through incubation of gold electrodes in THF solutions containing the polymers for 2 days. Ferrocene in thin films of polymers A and B display significantly faster electron-transfer rate than that of polymer C. Hydrophilic ethylene oxide side chains of polymers A and B decrease formal potential of tethered ferrocene groups because of electron-donating effect from ethylene oxide side chains, which stabilizes the ferrocenium ion and leads to a cathodic shift of the redox wave.

Alkynes↗
PubMed2005

Direct electrochemistry and electrocatalysis of heme proteins entrapped in agarose hydrogel films in room-temperature ionic liquids.

The electrochemistry and electrocatalysis of a number of heme proteins entrapped in agarose hydrogel films in the room-temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) have been investigated. UV-vis and FTIR spectroscopy show that the heme proteins retain their native structure in agarose film. The uniform distribution of hemoglobin in agarose-dimethylformamide film was demonstrated by atomic force microscopy. Cyclic voltammetry shows that direct electron transfer between the heme proteins and glassy carbon electrode is quasi-reversible in [bmim][PF(6)]. The redox potentials for hemoglobin, myoglobin, horseradish peroxidase, cytochrome c, and catalase were found to be more negative than those in aqueous solution. The charge-transfer coefficient and the apparent electron-transfer rate constant for these heme proteins in [bmim][PF(6)] were calculated from the peak-to-peak separation as a function of scan rate. The heme proteins catalyze the electroreduction of trichloroacetic acid and tert-butyl hydroperoxide in [bmim][PF(6)]. The kinetic parameter I(max) (maximum current at saturation concentration of substrate) and the apparent K(m) (Michaelis-Menten constant) for the electrocatalytic reactions were evaluated.

Biosensing Techniques↗
PubMed2005

Preparation and spectroscopic properties of multiluminophore luminescent oxygen and temperature sensor films.

A new luminescent oxygen and temperature sensor has been developed that utilizes two luminescent dyes, 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin platinum(II) (PtTFPP, the oxygen sensor) and tris(1,10-phenanthroline)ruthenium(II) dichloride (Ruphen, the temperature sensor). The two dyes are dispersed in an oxygen-permeable polymer binder consisting of a copolymer of 4-tert-butylstyrene (tBS) and 2,2,2-trifluoroethyl methacrylate (p-tBS-co-TFEM). To alleviate energy transfer and other quenching interactions between the two luminescent dyes in the p-tBS-co-TFEM binder, the Ruphen temperature sensor is encapsulated in polyacrylonitrile (PAN) polymer nanospheres that are prepared by coprecipitation of PAN and Ruphen from N,N-dimethylformamide solution. The temperature and air-pressure response of the emission from the sensor film is fully characterized by using emission spectroscopy. The emission from the two luminescent dyes is spectrally well-separated. The intensity of the Ruphen emission varies strongly with temperature (approximately 1.4% degrees C(-1)), whereas the intensity of the PtTFPP emission varies with temperature and air pressure. The two-dye luminescent coating is useful as a pressure-sensitive paint (PSP), where the emission from the Ruphen temperature sensor is used to correct for the temperature dependence of the pressure response of the PtTFPP sensor. To demonstrate the PSP application, a coupon coated with the sensor was imaged using a CCD camera, and the CCD images were analyzed by intensity ratio methods. Spectroscopic studies were also carried out on a sensor that contains three dyes in order to demonstrate the feasibility of including an intensity reference dye along with the temperature and pressure dyes into the sensor.

Journal Article↗
PubMed2005

Polymer surfaces with reversibly switchable ordered morphology.

Honeycomb macroporous films fabricated by the "breath figures" method were composed of poly2-vinylpyridine (P2VP) distributed in the holes of polystyrene (PS). The porous films exhibited reversible behavior responding to water and different solvent vapors. When the porous film was treated with water, the honeycomb pattern would change to the hexagonal islandlike pattern. Once heated to remove the water, the honeycomb pattern emerged again. When the porous film was exposed to different solvent vapors, the same reversible process appeared. Carbon disulfide (CS(2)), toluene (TOL), and tetrahydrofuran (THF) solvent vapors induced the honeycomb pattern into the ordered islandlike pattern, and ethanol, chloroform, methyl ethyl ketone (MEK), and dimethylformamide (DMF) solvent vapors made the islandlike pattern come back to the honeycomb pattern. The hygroscopic property of P2VP and the polymer-solvent interaction are the driving force for the reversibly switchable morphology. The appropriate control of the hole depth is very crucial in determining the reversible changes.

Journal Article↗
PubMed2006

Chemical modification of the internal surfaces of cylindrical pores of submicrometer size in poly(ethylene terephthalate).

Chemical modification of the internal surfaces of cylindrical pores with submicrometer pore diameter in a poly(ethylene terephthalate) (PET) film was examined. The modification involved the alkylation of the carboxylic acid on the surfaces with the alkylation reagent containing a fluorescent probe, and it was monitored by observing the change in fluorescent emission intensity. When the N,N-dimethylformamide solution of 4-(bromomethyl)-6,7-dimethoxycoumarin (BrCU), which bore a coumarin fluorophore, was introduced into the pores, the emission and excitation intensities of the membranes increased proportionally with increases of the pore surface areas. Fluorescent spots about 300 nm in diameter, which were located at the positions of the pores, can be observed in the fluorescence microscope image of the membranes, indicating that highly concentrated fluorescent probes are chemically incorporated on the internal surfaces of the cylindrical pores with 210 nm diameter in the membranes. In the reactions of the PET surfaces with BrCU, the fluorescent intensities increased with increases of the contact angles. This result indicates that the hydrophilicity of the internal pore surfaces can be qualitatively modified by controlling the change in the fluorescent intensities.

Journal Article↗
PubMed2006

Use of a ruthenium-containing conjugated polymer as a photosensitizer in photovoltaic devices fabricated by a layer-by-layer deposition process.

Multilayer polymer films composed of a ruthenium terpyridine complex containing poly(p-phenylenevinylene) (Ru-PPV) and sulfonated polyaniline (SPAN) were prepared by a layer-by-layer electrostatic self-assembly deposition. The deposition process was carried out from SPAN solution in water and Ru-PPV in dimethylformamide (DMF). Optical-quality multilayer thin films were obtained. The film growth process was monitored by quartz crystal microbalance, and the surface morphology of the films was studied by atomic force microscopy. It was found that the properties of the multilayer films were dependent on deposition conditions such as the pH of the SPAN solution, the presence of salt in the polymer solutions, and the post-film-forming thermal annealing process. Cross-section transmission electron microscopic images suggested that there was no stratified structure formed in the multilayer films. Photovoltaic cells were fabricated by sandwiching the multilayer films between indium-tin-oxide and aluminum electrodes. The device performances were examined by illumination with AM 1.5 simulated solar light. The power conversion efficiencies of these devices were on the order of 10(-3)%. The maximum incident photon-to-electron conversion efficiency (IPCE) of the devices was found to be approximately 2% at 510 nm, which is consistent with the absorption maximum of the ruthenium complex. This indicates that the photosensitization process is due to the electronic excitation of the ruthenium complex.

Journal Article↗
PubMed2006

Design of antibacterial surfaces by a combination of electrochemistry and controlled radical polymerization.

In this paper we report a new method for the electrochemical deposition of a metal/polymer composite layer on a conducting substrate. The electrochemical solution is a mixture of an acrylate (ethyl acrylate, EA; 2-phenyl-2-(2,2,6,6-tetramethylpiperidin-1-yloxy)ethyl acrylate, PTEA; 8-quinolinyl acrylate, 8QA), a metallic salt (silver(I) acetate), and a conducting salt in dimethylformamide. The process has been first studied with EA as the polymer precursor and then extended to PTEA and 8QA, respectively, with the purpose to prepare antibacterial surfaces. The final coating has been characterized by attenuated total reflection Fourier transform infrared spectroscopy, energy-dispersive X-ray analysis, environmental scanning electron microscopy, and atomic force microscopy. All the silver-containing coatings were effective against Gram-negative bacteria Escherichia coli. Bacteria Staphylococcus aureus could not adhere to the Ag(0)/polyacrylate films deposited on stainless steel.

Acetates↗
PubMed2006

Studies of potential inversion in an extended tetrathiafulvalene.

Electrochemical oxidation of the extended tetrathiafulvalene 9,10-bis(1,3-dithiole-2-ylidene)-9,10-dihydroanthracene (2) was studied in N,N-dimethylformamide. A single, two-electron oxidation peak occurs, and on the return sweep of a cyclic voltammogram, a two-electron reduction peak is seen. The oxidation of 2 to its cation radical and dication occurs with potential inversion (i.e., removal of the second electron occurs more easily than removal of the first). The extent of potential inversion was estimated by cyclic voltammetry to be 0.28 V by analysis of the process in terms of concerted structural change and electron transfer. Failure to detect the cation radical by EPR of an equimolar mixture of neutral 2 and the dication is consistent with this value. The inner reorganization energy of the cation radical was determined by gas-phase photoelectron spectroscopy (PES) to be 0.31-0.35 eV. Calculations, consistent with earlier experimental data, show rather large changes in structure associated with the oxidation processes. These large structural changes contrast with the relatively small inner reorganization energy found by PES. This observation prompted an analysis of voltammetry in terms of two-step processes, with structural change either preceding or following electron transfer. Agreement of simulations based on this mechanism with experimental voltammograms was equally as good as with the concerted mechanism. Notably, the two-step mechanism produced more realistic values of the transfer coefficient and electron-transfer rate constant for the first step of oxidation.

Journal Article↗
PubMed2006

Nanoporous structured submicrometer carbon fibers prepared via solution electrospinning of polymer blends.

A facile means for obtaining submicrometer carbon fibers with a nanoporous structure is presented. A mixture of polyacrylonitrile (PAN) and a copolymer of acrylonitrile and methyl methacrylate (poly(AN-co-MMA)) in dimethylformamide was electrospun into submicrometer fibers with a microphase-separated structure. During the followed oxidation process, the copolymer domains were pyrolyzed, resulting in a nanoporous structure that was preserved after carbonization. The microphase-separated structure of the PAN/poly(AN-co-MMA) electrospun fibers, the morphology, and porous structure of both the oxidized and the carbonized fibers were observed with scanning electron microscopy and transmission electron microscopy. The carbon fibers have diameters ranging from several hundred nanometers to about 1 microm. The nanopores or nanoslits throughout the fiber surface and interior with diameters of several tens of nanometers are interconnected and oriented along the longitudinal axis of the fibers. This unique nanoporous morphology similar to the microphase-separated structure in the PAN/poly(AN-co-MMA) fibers is attributed to the rapid phase separation, solidification, as well as the stretching of the fibers during electrospinning. The pore volume and pore size distribution of the carbonized fibers were investigated by nitrogen adsorption and desorption.

Journal Article↗
PubMed2007

Nonvolatile polymer memory device based on bistable electrical switching in a thin film of poly(N-vinylcarbazole) with covalently bonded C60.

A functional polymer (PVK-C60), containing carbazole moieties (electron donors) and fullerene moieties (electron-acceptors) in a molar ratio of about 100:1, was synthesized via covalent tethering of C60 to poly(N-vinylcarbazole) (PVK). The molecular structure and composition of PVK-C60 were characterized by FTIR, Raman, and UV-vis absorption spectroscopy, gel permeation chromatography (GPC), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CyV). The C60-modified PVK exhibited an enhanced glass-transition temperature (Tg = 226 degrees C) and good solubility in organic solvents such as toluene, tetrahydrofuran, chloroform, and N,N-dimethylformamide (DMF). It could be cast into transparent films from solutions. For a thin film of PVK-C60 sandwiched between an indium tin oxide (ITO) electrode and an Al electrode (ITO/PVK-C60/Al), the device behaved as nonvolatile flash (rewritable) memory with accessible electronic states that could be written, read, and erased. The polymer memory exhibited an ON/OFF current ratio of more than 105 and write/erase voltages around -2.8 V/+3.0 V. Both the ON and OFF states were stable under a constant voltage stress of -1 V for 12 h and survived up to 108 read cycles at -1 V under ambient conditions.

Journal Article↗
PubMedDate not supplied

Side-chain interactions and conformation in alpha-helical poly(gamma-phenacyl L-glutamate). Aggregation in dilute solutions.

The behavior of alpha-helical poly(gamma-phenacyl L-glutamate) (PPLG) has been studied by hydrodynamic, optical rotation, dielectric, and nmr measurements in different solvents. Special attention has been paid to side-chain interactions which depend on the ease of solvation of the phenacyl chromophore. Thus, in hexafluoro-2-propanol the circular dichroism spectrum is very similar to that usually observed for an alpha helix, and hydrogen bonding was shown to occur between the solvent and phenacyl CO group. In other heliocogenic solvents, side chain-side chain interactions occur. In dimethylformamide and pyridine they give rise at low temperature and low concentrations to an aggregation phenomenon whose molecular mechanism implies a molecular weight dependent folding of the molecules. Models for the side-chain conformation are proposed for the polymer in the solid state on the basis of infrared dichroism.

Binding Sites↗
PubMedDate not supplied

High-resolution nuclear magnetic resonance studies at 270 MHZ of alternating and random poly(benzyl D,L-glutamates).

The solution conformations of several D,L copoly benzyl glutamates both random and alternating are studied by comparing their NMR spectra in chloroform and also in dioxane and dimethylformamide. The alpha CH chemical shifts characteristic of the alpha helix of strictly alternating DL copolymers in chloroform/0.5% TFA are established (3.65 and 3.82 ppm) and differ from that of the regular alpha helix (3.92 ppm). It is concluded that alternating copolymers prepared by an essentially racemization-free method are completely in the alpha-helical conformation which is characteristic of strictly alternating D-L copolymers, whereas random copolymers are largely regular alpha. The alpha leads to piDL helix/helix transition of an alternating copolymer in dioxane has been monitored and the alpha CH resonance characteristic of the piDL helix is found to be at the unusually low chemical shift of 4.45 ppm.

Glutamates↗
PubMedDate not supplied

Solubilization of single-wall carbon nanohorns using a PEG-doxorubicin conjugate.

A procedure for dispersing oxidized single-wall carbon nanohorns (oxSWNHs) in aqueous solution using a polyethylene glycol-doxorubicin (PEG-DXR) conjugate is described. In this procedure, oxSWNHs were first incubated with PEG-DXR in dimethyl sulfoxide (DMSO) or N,N-dimethylformamide (DMF), two organic solvents with relatively high electric dipole moments, after which the solvent was gradually changed to an aqueous one via addition of water until the final concentration of DMSO or DMF reached 10%. The PEG-DXR-oxSWNH complex that was obtained was able to pass through dextran-based chromatographic media (Sephadex G25) equilibrated with water. By contrast, untreated oxSWNHs and DXR-treated or PEG-treated oxSWNHs were unable to penetrate the column, indicating that the PEG-DXR conjugate endowed oxSWNHs with dispersibility in aqueous solution. In gel filtration experiments, the presence of free DXR had an inhibitory effect on the penetrability of PEG-DXR-oxSWNH complexes, which is consistent with the idea that PEG-DXR interacts with the surfaces of oxSWNHs via its DXR moiety. Quantitative analyses showed that the complex contained more than 250 mg of PEG-DXR for each gram of oxSWNHs. The average diameter of the dispersed complex was estimated to be approximately 160 nm using dynamic light scattering analysis. These results suggest that our method has the potential to open the way for the use of oxSWNHs as a clinically practical drug carrier.

Apoptosis↗
PubMed2005

Thermal transport in au-core polymer-shell nanoparticles.

Thermal transport in aqueous suspensions of Au-core polymer-shell nanoparticles is investigated by time-resolved measurements of optical absorption. The addition of an organic cosolvent to the suspension causes the polystyrene component of the polymer shell to swell, and this change in the microstructure of the shell increases the effective thermal conductivity of the shell by a factor of approximately 2. The corresponding time scale for the cooling of the nanoparticle decreases from 200 ps to approximately 100 ps. The threshold concentration of cosolvent that creates the changes in thermal conductivity, 5 vol % tetrahydrofuran in water or 40 vol % N,N-dimethylformamide in water, is identical to the threshold concentrations for producing small shifts in the frequency of the plasmon resonance. Because the maximum fraction of solvent in the polymer shell is less than 20 vol %, the increase in the effective thermal conductivity of the shell cannot be easily explained by contributions to heat transport by the solvent or enhanced alignment of the polystyrene backbone along the radial direction.

Gold↗
PubMed2003

A simple synthesis of 7,4'-dihydroxy-6-methoxyisoflavone, glycitein, the third soybean isoflavone.

4-Methoxyresorcinol (3) was synthesized as the precursor for glycitein (6) synthesis by the oxidation of 3-hydroxy-4-methoxybenzaldehyde (1) to the aryl formate with H2O2 and a catalytic amount of SeO2. Glycitein (6) was synthesized by cyclization of 2,4,4'-trihydroxy-5-methoxydeoxybenzoin (5) with N,N-dimethylformamide, boron trifluoride diethyl ether, and methanesulfonyl chloride in a microwave oven.

Catalysis↗
PubMed1999

Halohydrins and polyols derived from antirrhinoside: structural revisions of muralioside and epimuralioside

Treatment of the iridoid glucoside antirrhinoside (1) with pyridinium chloride in dimethylformamide gave rise to the two possible trans-halohydrins, linarioside (4) and isolinarioside (5). Pyridinium bromide gave the two analogous bromohydrins. It is shown that the iridoid glucosides 8-epi-muralioside from Linaria arcusangeli and 7,8-epi-antirrhinoside from Linaria dalmatica are both identical with isolinarioside, and therefore, these names are redundant. The structure of muralioside isolated from Cymbalaria muralis is revised to that of its 8-epimer (8), while the structure of an isomeric, new iridoid glucoside from Paulownia tomentosa has been elucidated to be 7beta-hydroxyharpagide (3), the structure originally assigned to 8. In addition, 7alpha-hydroxyharpagide (2), the known product from the base-catalyzed hydrolytic opening of 1, has been isolated from Antirrhinum majus and thus shown to be a natural product.

Journal Article↗
PubMed2000

Copper-mediated cross-coupling of aryl boronic acids and alkyl thiols.

[reaction: see text] The cross-coupling of aryl boronic acids and alkanethiols mediated by copper(II) acetate and pyridine in anhydrous dimethylformamide affords aryl alkyl sulfides in good yield with a wide variety of substituted aryl boronic acids. The method is applicable to the synthesis of aryl sulfides of cysteine.

Alkylation↗
PubMed2001

An hermaphrodite [2]rotaxane: preparation and analysis of structure.

[structure: see text]. The pictured rotaxane is assembled in water by capping a substituted cyclodextrin composed of the wheel and axle components. The unusual dimeric structure of the rotaxane reflects the thermodynamics of the assembly process. In N,N-dimethylformamide, the corresponding monomer is the predominant product.

Journal Article↗