Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “ACRYLIC RESINS”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81Linked to original sources

Occlusal vertical dimension changes in visible light-cured resin.

On a twenty standard, identical edentulous upper and lower casts, an identical upper and lower waxed-up sets of dentures were constructed with same vertical dimension of occlusion. These waxed up dentures were divided into two equal groups. For group I, the dentures sets were processed in compression molding heat-cured acrylic resin denture base material. For group II, the denture sets were processed in visible light-cured denture base material. After processing the vertical dimension of occlusion was measured for every denture set in both groups. It was found that there was an increase in the vertical dimension of occlusion on group I and a decrease in the vertical dimension of occlusion in group II. Regardless of the direction of the changes in the vertical dimension of occlusion, it was found that there was a significant difference between the dimensional changes in both groups and the dimensional changes in the denture bases of group I was more than group II by 54.5%.

Acrylic Resins↗

A technique for restoring abutments for removable partial dentures.

A technique was presented to restore a removable partial denture abutment so that the removable denture can continue to be used. The technique uses cold-curing acrylic resin in a rubber base impression form. The technique can be adapted to both direct and indirect procedures.

Acrylic Resins↗

Fabrication of a maxillary occlusal treatment splint.

A technique has been described which results in a high-quality occlusal splint by duplicating the centric relation record in acrylic resin. Each fabrication step has been thoroughly controlled. The major advantage of the technique is a reduction in clinical appointment time.

Acrylic Resins↗

Fabrication of a posterior shade guide for removable partial dentures.

Even under the best circumstances, posterior tooth color discrimination is still a subjective decision. Most shade guides do not follow a logical pattern in number or graduation of Hue, Value, and Chroma. Moreover, the shade guides are only obtainable with anterior teeth, usually maxillary central incisors. The fabrication of a first premolar shade guide is a step in the direction of making the posterior esthetic requirements more easily attainable for the dentist and the final result more satisfying for the patient. One can also use the various "broken sets" of acrylic resin teeth to achieve the necessary combination of posterior shades if cost is a factor and uniformity in molds is not required.

Acrylic Resins↗

Effect of retention grooves on tooth-denture base bond.

The bond strength of acrylic resin teeth with and without retention grooves processed onto standard and high-impact denture base resin was investigated. A shear compressive force was applied at an angle of 130 degrees to the lingual surface of the teeth until fracture occurred. The values were subjected to a two-way analysis of variance with repeated measures. Canine teeth bonded better than central or lateral incisors (p less than 0.01). A significantly greater force was required to fracture teeth from high-impact resin (p less than 0.01). Vertical retention grooves enhanced bond strength (p less than 0.01).

Acrylic Resins↗

The hollow maxillary complete denture: a modified technique.

The severely atrophic maxilla poses a clinical challenge for fabrication of a successful complete denture. This article describes a novel method for fabrication of a hollow maxillary complete denture. It incorporates a clear, pressure-formed matrix of the trial denture external contours to facilitate the fabrication of a silicone putty cavity form. This cavity form ensures the appropriate dimensions of both the denture base acrylic resin for structural integrity and the denture base cavity for optimal weight reduction.

Acrylic Resins↗

Tooth duplication in complete dentures.

This article describes the duplication of porcelain denture teeth in acrylic resin. The method allows the patient to use their existing denture as a transitional prosthesis without harming opposing restorations.

Acrylic Resins↗

Processing complete dentures.

When this procedure is followed carefully, a strip of 0.0005-inch shim stock meets resistance when an attempt is made to withdraw it from between the teeth in occlusion and the incisal pin and its table simultaneously. Therefore, it is possible to process complete dentures by using compression molding and external heat for polymerization. The procedure involves a precise step-by-step method with particular emphasis on (1) investing properly in dental stone, (2) packing only one denture at a time with only one mix of acrylic resin, (3) using minimum packing pressure with maximum flow time, (4) trial packing until no flash is evident, and (5) careful deflasking.

Acrylic Resins↗

Microwave disinfection of denture base materials colonized with Candida albicans.

STATEMENT OF PROBLEM: Infection of denture materials with Candida albicans is common and contributes to denture stomatitis. PURPOSE: This 3-phase investigation examined: (1) the efficacy of microwave irradiation against C albicans colonized on 3 soft denture liners and 1 heat-polymerized denture base resin, and (2) the effect of this irradiation on the hardness of the materials tested. MATERIAL AND METHODS: In phase 1, an experimental protocol was developed. Sterilized specimens from 2 denture base soft liners and 1 heat-polymerized acrylic resin denture base material (n = 45 each) were inoculated with C albicans. Two thirds of the specimens were irradiated in a 60 Hz microwave oven for 5 minutes (dry). C albicans growth was then assessed with streaked blood agar plates and thioglycollate broth. One third of the specimens were not irradiated and served as controls. Pretest and posttest Shore A hardness values were obtained and compared. For phase 2, 15 specimens from each material group were subjected to irradiation (while immersed in water) for 5 minutes; and, 15 from each material were subjected to 10- and 15-minute irradiation (dry), with subsequent sterility and change in hardness assessments completed as described in phase 1. In phase 3, 15 specimens from each material group were subjected to repeated 5-minute irradiation cycles (while immersed in water), and changes in hardness were examined. RESULTS: Only the 5-minute irradiated specimens immersed in water were effectively sterilized, as verified by the thioglycollate assay. The effect of repeated 5-minute irradiation cycles resulted in a significant change in hardness of the PermaSoft specimens. CONCLUSIONS: Five-minute irradiation, while immersed in water, killed all C albicans present on the materials tested; and, repeated 5-minute irradiation significantly affected the hardness of only the PermaSoft material.

Acrylic Resins↗

Influence of prosthesis material on stress distribution in bone and implant: a 3-dimensional finite element analysis.

A 3-dimensional finite element analysis was conducted to assess stress distribution in bone, implant, and abutment when gold alloy, porcelain, or resin (acrylic or composite) was used for a 3-unit prosthesis. A unit force was applied axially and then buccolingually to the center of the pontic. For gold and porcelain, similar maximum equivalent stress was found in each part of the models. In almost all cases, stress in the model with the resin prostheses was similar to or higher than that in the models with the other 2 prosthesis materials. The highest increase in stress with the resins was found in the implant-abutment unit under axial load. The protective role of resin for the implant-bone interface could not be demonstrated under the conditions of this analysis.

Acrylic Resins↗

Use of technopolymer clasps in prostheses for patients due to have radiation therapy.

Patients with large oral defects as a result of a maxillectomy procedure, who are due to have postoperative radiotherapy, need to have the density of the defect restored to ensure standardised radiation distribution. This is achieved with various types of boluses that often require tissue surface positioning stents to help support them. Traditional metal-clasp retained stents were discarded as the clasps caused backscatter of the radiation beams. A radiolucent material was needed to retain these prostheses. Dental D, an acetal resin was used in the fabrication of a positioning stent. It was assessed in terms of ease of manufacture, cost, fit, retention and radiolucency. The material was found to be more costly and time-consuming to manufacture than conventional metal-retained acrylic resin prostheses, but its radiolucency made it ideal for use in patients during radiotherapy treatment. Future studies will determine if the long-term strength of the material will allow the clasps to be used in a definitive prosthesis and thus help offset the initial time and costs.

Acrylic Resins↗

Fracture resistance of Kevlar-reinforced poly(methyl methacrylate) resin: a preliminary study.

The reinforcing effect of Kevlar fibers incorporated in processed poly(methyl methacrylate) resin samples was studied using 0% (controls), 0.5%, 1%, and 2% by weight of the added fibers. The samples were subjected to impact testing to determine fracture resistance, and sample groups were statistically compared using an ANOVA. Each reinforced sample had significantly greater fracture resistance (P less than 0.05) than the control, and no difference was found either within or between control groups. The use of reinforcing Kevlar fibers appears to enhance the fracture resistance of acrylic resin denture base materials.

Acrylic Resins↗

Effects of occlusal loading and thermocycling on the marginal gaps of light-polymerized and autopolymerized resin provisional crowns.

STATEMENT OF PROBLEM: Resin crowns appear to be increasingly at risk for increases in marginal gap size as a result of thermocycling and occlusal loading. PURPOSE: This in vitro study compared the effects of occlusal loading and thermocycling on the margins of provisional crowns made from a conventional autopolymerized provisional acrylic resin (Jet) to those made from a light-polymerized resin (Unifast LC). METHODS AND MATERIAL: Crowns made from the 2 materials were thermocycled and loaded on custom dies to simulate 6 to 8 weeks of oral function. Gap sizes were measured before and after thermocycling and occlusal loading. RESULTS: Provisional crowns made from light-polymerized resin exhibited smaller changes in marginal gap size than did those made from conventional autopolymerized resin. CONCLUSIONS: The improved characteristics of the light-polymerized material may prove useful for provisional crowns that must remain for long periods in the oral environment.

Acrylic Resins↗

A new approach in construction of nasal septal obturators.

Nasal septal obturators are used to mechanically close nasal septal defects. The use of an impression of the nasal septal defect in the construction of nasal septal obturators is mandatory. A heat-cured, highly polished acrylic resin button constructed from an accurate impression is less likely to induce crusting and bleeding, or to be dislodged, than a Silastic button.

Acrylic Resins↗

A history of dental polymers.

The disadvantages of the use of vulcanite as a denture base material prompted the development of a wide range of thermoplastic polymers as alternatives to vulcanite. Heat-cured acrylic resin materials are the most widely used polymeric denture base materials at present, but research into further improvements in denture base materials continues.

Acrylic Resins↗

Influence of a thickness and processing method on the linear dimensional change and water sorption of denture base resin.

The purpose of this study was to evaluate the influence of a thickness and processing method on linear dimension change and water sorption in a denture base resin after storage in water for 24 hours, one week, and four weeks. Sixty wax specimens 65 mm long and 10 mm wide were fabricated in three thicknesses, 1.5, 3, and 4.5 mm. Three dimples were made in each wax specimen. A travelling microscope was used to measure the total distance from the uppermost dimple to the lowest dimple to the nearest 0.01 mm. Acrylic resin blocks were polymerized with 2 processing cycles (short and long-cured). Immediately after processing, all samples were measured by the same investigator. They were then weighed by an electronic precision balance capable of measuring to 0.001 g. Data were analyzed by analysis of variance. Thickness and time of storage were statistically significant on the dimensional change (linear and weight changes) of denture-base resin (p < 0.01), showing the influence of the processing method.

Absorption↗

Clinical applications of visible light-cured resin in maxillofacial prosthetics. Part I: Denture base and reline material.

A visible light-cured resin system enables the dentist to accomplish chairside relining of removable prosthesis. The material is pliable and can be initially cured in the mouth with the regular hand-held visible light. A special unit is needed to completely cure the material, which thereafter is comparable in quality to heat-polymerized acrylic resin. The value of this system for the practice of maxillofacial prosthetics is demonstrated by the ease of relining of various devices and obturator prostheses.

Acrylic Resins↗

Use of the modified acrylic external fixator in 54 dogs and 28 cats.

This paper describes the use of acrylic resin instead of a Kirschner clamp for treating bone fractures. The technique is cheaper than using Kirschner external skeletal fixator and allows greater flexibility for pin placement. It is also less prone to self mutilation by dogs than the entirely acrylic external fixator. The modified acrylic fixator gave results similar to those obtained with the Kirschner external fixator, when used in 54 dogs and 28 cats.

Acrylic Resins↗