Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Polymerization”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80Linked to original sources

Chiral electrokinetic chromatography using dipeptide polymeric surfactants: present state of the art.

Polymeric amino acid based surfactants have been recently employed as pseudostationary phases in capillary electrophoresis. These phases are effective for chiral separation of analytes in different charge states and hydrophobicities. This review paper focuses on polymeric dipeptide surfactants. The benefits of dipeptide over single amino acid micelle polymers are shown. Some aspects of dipeptide surfactants that are presented here includes the amino acid order, effect of number and position of chiral centers, and steric factors on enantiomeric separation of chiral compounds in different charge states. In addition, the preferential site of interaction of the chiral analyte using diastereomers of polymeric dipeptide surfactants is discussed.

Amino Acids↗

Actin polymerization in response to different chemoattractants is reduced in granulocytes from chronic myeloid leukemia patients.

Chronic myeloid leukemia (CML), a hematopoietic stem cell disorder, is characterized by the presence of Philadelphia chromosome (Ph1). Earlier studies have shown that various functions, such as chemotaxis, fluid phase pinocytosis, phagocytosis, and degranulation in response to chemotactic peptide formyl-methionyl-leucyl-phenylalanine (fMLP), were defective in polymorphonuclear leukocytes (PMNL) from CML patients. These functions depend on actin microfilaments (MF). Further studies showed that fMLP-induced actin polymerization was lower in CML PMNL. To see if this defect is specific to stimulation by fMLP alone or is a global phenomenon involving other chemoattractant receptors, chemotaxis and actin polymerization were studied in response to fMLP, an analog of fMLP, formyl-methionine-1 aminocyclooctane 1 carboxylic acid-phenyalanine-O-methionine (FACC8), platelet-activating factor (PAF), and leukotriene B4 (LTB4). These compounds bind to different chemoattractant receptors. Chemotaxis and actin polymerization in response to all four chemoattractants were significantly lower in CML PMNL compared with PMNL from normal subjects and were differentially affected for the different chemoattractants. These results suggest a global phenomenon involving all four chemoattractant-stimulated pathways. This lower amount of F-actin may be responsible for the defective chemotaxis seen in these cells.

Actin Cytoskeleton↗

Encapsulation of proteins in biodegradable polymeric microparticles using electrospray in the Taylor cone-jet mode.

Solvent extraction (or evaporation from a W(1)/O/W(2)-dispersion), coacervation, and spray drying methods are commonly employed to encapsulate protein drugs in polymeric microparticles for sustained delivery applications. To overcome the limitations of these methods, a novel electrospray method was developed to encapsulate a model protein drug-bovine serum albumin (BSA) in biodegradable polymeric microparticles and examine the feasibility of the process in not denaturing the protein. Microparticles of approximately 20 microm diameter with corrugated surfaces and smooth surfaces were observed by scanning electron microscope. Confocal laser scanning microscope images showed that BSA was distributed evenly in microparticles. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) was employed to investigate the protein integrity of BSA released from the polymer matrix after 38 days. No protein degradation was observed during the 38 days release. The secondary structure of released BSA was characterized by Fourier transform infrared (FTIR) and circular dichroism (CD), which suggested that the released BSA was almost identical to native BSA. The encapsulation efficiency could reach 76% by adjusting the amount of the additive Pluronic F127 and processing parameters. The release profile could be tailored by the fabrication process and the sustained release of BSA could endure for more than 1 month. More than 80% of the bioactivity of BSA (evaluated by BSA ELISA kit) could be maintained after releasing from polymer matrix. Findings of the present study demonstrate that this novel electrospray method is a promising approach to encapsulate bioactive materials such as proteins, enzymes, antibiotics, and DNA fragments in biodegradable polymeric particles.

Absorbable Implants↗

Enzyme immobilization by radiation-induced polymerization of 2-hydroxyethyl methacrylate at low temperatures.

Enzyme immobilization by radiation-induced polymerization of hydrophilic glass-forming monomers, such as 2-hydroxyethyl methacrylate, was studied. Enzyme radiation damage could be sufficiently retarded at low temperatures. The immobilized enzyme activity yield was markedly higher at low temperature than at higher temperature polymerization. At low temperatures the polymerized composite had a porous structure owing to ice crystallization which depends on the monomer concentration. It was deduced that the enzyme was partially trapped on the polymer surface, partially isolated in the pore, and partially occluded inside the polymer matrix. A decrease in activity caused by enzyme leakage was observed with repeated use in enzyme reactions where the composites had a large porosity. The activity yield showed a maximum at certain optimum porosities, i.e., at optimum monomer concentrations. Continuous enzyme reaction was preferably carried out using immobilized enzyme columns.

Acrylates↗

Study on polymerization of the pharmaceutical substances isohexenylnaphthazarins.

Polymerization of naturally occurring isohexenylnaphthazarins (IHN), such as alkannin, shikonin (A/S) and their derivatives, which are potent pharmaceutical substances, significantly affects their use in pharmaceuticals, cosmetics and as food colorants, because it leads to reduction of the lustre of their red coloration, a decrease in their solubility and reduces the active monomeric IHN derivatives. In the present study, the influence of several crucial variables (processing and storage) was experimentally investigated on IHN polymerization by size exclusion chromatography (SEC). Temperature and solvent polarity increased significantly the concentration of hydroxynaphthoquinone (HNQ) polymers, while air and light exposure conditions did not significantly affect IHN polymerization. Low temperatures are proposed for all processes of industrial production of pharmaceutical preparations containing IHN and HNQ. An optimization of the industrial conditions used for the preparation of pharmaceutical and cosmetic preparations containing IHN, maximizing the active monomeric IHN fraction, was performed.

Air↗

Silsesquioxane models for silica surface silanol sites with adjacent siloxide functionalites and olefin polymerization catalysts thereof.

Incompletely condensed silsesquioxanes of the type R7Si7O9(O[SiR'2O]n)OH (R = c-C5H9, c-C6H11; R' = Me, Ph; n = 1-4), containing a siloxane ring of variable size and rigidity and a remaining silanol, are described. Compared with a truly isolated silanol [R7Si8O12(OH)], solution and solid state FT-IR spectra of these compounds show a nu(OH) shift of approximately 150 cm(-1) to lower frequency, which suggests hydrogen bonding of the silanol with the internal siloxane ring. In agreement with this, the relative ion pair acidities of the silanols in THF, determined by UV/Vis, were lowered by 0.8-1.2 compared with a truly isolated silanol. Density functional theory (DFT) calculations on these systems confirm the presence of intramolecular hydrogen bonding. Possible interaction of the silyl ether functionalities with Lewis acidic metal sites was studied for the neutral gallium-substituted systems and cationic titanium silsesquioxane complexes, models for an immobilized titanium olefin polymerization catalyst. The electron donating capability of the siloxide functionalities in 1, 6, and 7 is not sufficient to satisfy the electron deficiency of the corresponding gallium silsesquioxane species, which form dimeric structures with a bridging siloxide unit rather than Lewis base adducts with coordinated siloxide functionalities. Metallation of 1 and 4 with [Cp"Ti(CH2Ph)3] (Cp" = eta5-1,3-C5H3(SiMe3)2) in a 1:1 ratio afforded monomeric titanasilsesquioxanes. To probe the effect of the neighboring siloxane ring on the highly Lewis acidic titanium center, the catalytic activities of the corresponding cationic half-sandwich complexes were tested in 1-hexene polymerization. Compared with the catalyst system based on the isolated silanol [(c-C5H9)7Si8O12OH], the presence of a neighboring siloxane ring causes considerable retardation of the polymerization process but also improves the stability of the catalyst.

Alkenes↗

Yttrium and lanthanide complexes with various P,N ligands in the coordination sphere: synthesis, structure, and polymerization studies.

Yttrium and lanthanide complexes with different P,N ligands in the coordination sphere have been synthesized. First the chloride complexes [{CH(PPh2NSiMe3)2}Ln{(Ph2P)2N}Cl] (Ln = Y (1 a), La (1 b), Nd (1 c), Yb (1 d)) having the bulky [CH(PPh2NSiMe3)2]- and the flexible [(Ph2P)2N]- ligands in the same molecule were prepared by three different synthetic pathways. Compounds 1 a-d can be obtained by reaction of [{[CH(PPh2NSiMe3)2]LnCl2}2] with [K(thf)nN(PPh2)2] (n = 1.25, 1.5) or by treatment of [{(Ph2P)2N}LnCl2(thf)3] with K[CH(PPh2NSiMe3)2]. Furthermore, a one-pot reaction of K[CH(PPh2NSiMe3)2] with LnCl3 and [K(thf)nN(PPh2)2] leads to the same products. Single-crystal X-ray structures of 1 a-d show that the conformation of the six-membered metallacycle (N1-P1-C1-P2-N2-Ln) which is formed by chelation of the [CH(PPh2NSiMe3)2]- ligand to the lanthanide atom is influenced by the ionic radius of the central metal atom. In solution dynamic behavior of the [(Ph2P)2N]- ligand is observed, which is caused by rapid exchange of the two different phosphorus atoms. Further reaction of 1 b with KNPh2 resulted in [{(Me3SiNPPh2)2CH}La{N(PPh2)2}(NPh2)] (2). Compounds 1 a-d and 2 are active in the ring-opening polymerization of epsilon-caprolactone and the polymerization of methyl methacrylate. In some cases high molecular weight polymers with good conversions and narrow polydispersities were obtained. In both polymerizations the catalytic activity depends on the ionic radius of the metal center.

Journal Article↗

Polystyrene-supported organotin dichloride as a recyclable catalyst in lactone ring-opening polymerization: assessment and catalysis monitoring by high-resolution magic-angle-spinning NMR spectroscopy.

Dialkyltin dichloride grafted to a cross-linked polystyrene, with the formula [P-H]((1-t))[P-(CH2)nSnBuCl2]t (P=[CH2CH(pC6H4)], t=the degree of functionalization, and n=6 or 11), is investigated as a recyclable catalyst in the ring-opening polymerization (ROP) of epsilon-caprolactone (CL). It is demonstrated that high-resolution magic-angle-spinning (HR-MAS) NMR spectroscopy is an invaluable tool to characterize completely the supported catalyst. The 2D 1H-13C HSQC HR-MAS spectrum, in particular, allowed extensive assignment of the 1H and 13C resonances, as well as accurate measurement of the (n)J((1)H-(117/119)Sn) and (n)J((13)C-(117/119)Sn) coupling constants. 1H and 119Sn HR-MAS NMR spectroscopy is presented as a monitoring tool for catalytic processes based on organotin compounds, particularly for the investigation of the extent to which polymerization residues are observable in situ in the material pores and for the assessment of the chemical integrity and recycling conditions of the grafted catalyst. From polymerization experiments with CL, initiated by n-propanol and with [P-H]((1-t))[P-(CH2)nSnBuCl2]t of various compositions as the supported catalyst, it appears that a partial 'burst' of the polystyrene support occurs when the length of the alkyl spacer is limited to n=6, as a result of polymer chains growing within the pores of the support. However, extension of the length of the aliphatic polymethylene spacer from 6 to 11 carbon atoms preserves the support integrity and allows the production of catalyst-deprived poly(epsilon-caprolactone) (PCL) oligomers. A preliminary attempt to recycle the heterogeneous catalyst has shown that very good reproducibility can be obtained, in terms of both catalyst activity and molecular-weight parameters of the as-recovered PCL polyester chains.

Journal Article↗

Water-soluble ionic liquids as novel stabilizers in suspension polymerization reactions: engineering polymer beads.

Aqueous solutions of ionic liquids have been used as novel and environmentally friendly reaction media to synthesize and "control" the size of different cross-linked polymer beads by suspension polymerization reactions. It was found that the investigated ionic liquids can act as novel stabilizing agents of the suspensions as a result of their surface-active properties. The results have demonstrated that the average size of polymer beads can be varied from the macro- to the nanoscale and their surface area can also be "adjusted" by this synthetic approach. Furthermore, the use of a combination of ionic liquids and water for the synthesis of polymers, the simple isolation of the products formed in this polymerization procedure, as well as the recycling of the continuous medium for further reactions open up possibilities for the development of "new and green" polymerization processes.

Ions↗

Effects of villin on the polymerization and subunit exchange of actin.

We have investigated the Ca2+ -dependent interactions of villin, a protein of the intestinal microvillar core, with actin by monitoring resonance energy transfer between fluorescently labeled actin subunits. In the presence of elevated free Ca2+ (approximately 20 microM), villin affects both the nucleation and the elongation phases of actin polymerization. Consistent with previous reports, villin stimulates the nucleation process and will form stable nuclei under depolymerization conditions. Compared to the control, the net rate of polymerization is slightly inhibited at low concentrations of villin (villin/actin approximately 1:400) but is stimulated at higher concentrations (villin/actin greater than 1:100). Villin also significantly increases the critical concentration of actin polymerization. Addition of either villin or villin-actin complexes induces depolymerization of preassembled actin filaments. This villin-induced depolymerization is reversible upon removal of free Ca2+ or upon the addition of phalloidin. The exchange of actin subunits at steady state is inhibited at low concentrations of villin (villin/actin approximately 1:200) but is stimulated at higher concentrations (villin/actin approximately 1:50). None of the above effects is observed at less than 10(-8) M free [Ca2+].

Actins↗

Neurite elongation is blocked if microtubule polymerization is inhibited in PC12 cells.

We have injected process-bearing PC12 cells with colchicine-tubulin mixed with either fluorescein-dextran or a rhodamine-labelled tubulin analogue to determine the role of microtubule polymerization in neurite elongation. Colchicine-tubulin is a specific, substoichiometric poison of microtubule assembly. We have shown that colchicine-tubulin does not cause existing PC12 microtubules to disassemble, and yet can inhibit the assembly of rhodamine-tubulin injected along with it. In population studies of neurite outgrowth in injected and uninjected cells, we find that colchicine-tubulin substantially inhibits neurite extension from injected cells over a wide variety of concentrations. In acute time-course studies of injected cells, we find that colchicine-tubulin does not block neurite outgrowth until the injectate reaches the neurite tip. Thereafter, however, it blocks process elongation completely. Thus we can conclude that microtubule polymerization in the region of the growth cone is an important element in neurite elongation. While polymerization at the cell body may be important in supplying subunits to the distal neurite, it does not play a direct role in process extension.

Animals↗

Two-step mechanism for actin polymerization in human erythroleukemia cells induced by phorbol ester.

Human erythroleukemia (HEL) cells grow in suspension, but after treatment with nM PMA the cells adhere and spread on glass or fibronectin [Jarvinen et al., 1987: Eur. J. Cell Biol. 44:238-246]. We observed an early (20-30 min) stage of spreading in which F-actin was organized into peripheral arcs near the spreading margin and vinculin was localised to the cell's periphery at the ends of these arcs. By 1 h the cells were well spread with straight actin bundles many of which ended at more central sites terminating on patches containing vinculin and talin; thus the cells assemble typical stress fibers but do not appear to polarize. The cells also spread on RGD polymer. DiC8 (1,2-dioctanoyl-sn-glycerol, C8:0, Sigma Chemical Co., St. Louis, MO) induced spreading but only if DAG kinase inhibitor and A-23187 were also present; in their absence cells adhered but did not spread. Spreading was approximately 85% inhibited by 100 nM staurosporine. PKC-beta was shown to be present in the cells by immunoblotting. In cells spread for 1 h with PMA, F-actin increased to 180% of control levels as measured by RP binding and the actin sequestering complex of G-actin-thymosin beta 4 decreased significantly. To determine whether the F-actin increase required adhesion, we inhibited cell attachment to the substratum by adding RGDS, by coating glass surfaces with hemoglobin, or by a combined treatment. Under these conditions PMA-treated suspended cells still increased their F-actin to 126-137% of controls, a significant increase over control levels. Staurosporine inhibited F-actin increases under all the conditions studied. Permeabilized cell suspensions, incubated with rhodamine labelled G-actin, incorporated the labelled actin along cell membranes at a low level. A few minutes preincubation with either diC8 plus DAG kinase inhibitor or with PMA strongly increased the incorporation. This increased incorporation was reduced to below control levels by either staurosporine (100 nM) or cytochalasin D (1 microM). We conclude that both suspended and spreading HEL cells can be stimulated to polymerize actin by a mechanism dependent on PKC or a PKC-like molecule. In suspended cells, the polymerization occurs along the membrane. When cells spread, F-actin increased to a significantly greater extent. This second step could involve additional polymerization, perhaps at the observed adhesion sites, decreased turnover of the actin bundles, or a combined effect of both mechanisms.

Actins↗

Synthesis and biological evaluation of boronic acid containing cis-stilbenes as apoptotic tubulin polymerization inhibitors.

A series of boronic acid containing cis-stilbenes as potent inhibitors of tubulin polymerization was synthesized by the introduction of boronic acid as an acceptor-type functional group into the aromatic ring B of the combretastatin framework. High cell-growth inhibition was observed with boron compounds 13 c and 13 d, in which a hydroxy group on the aromatic ring B of combretastatin A-4 was replaced with boronic acid; IC50 values toward B-16 and 1-87 cell lines are 0.48-2.1 microM. Compounds 13 c and 13 d exhibited significant inhibitory activity toward tubulin polymerization (IC50=21-22 microM). The carboxylic acid derivative 17, which can be considered as a mimic of boronic acid 13 c, did not show significant inhibition of cell growth or tubulin polymerization. According to the FACScan analysis using Jurkat cells, apoptosis was induced after incubation for 8 h with 13 c at a concentration of >10(-8) M. Growth inhibitory experiments against a panel of 39 human cancer cell lines revealed 13 c to inhibit growth differently than combretastatin A-4; the correlation coefficient (r) between the two compounds was 0.553 in the COMPARE analysis.

Animals↗

On the structure of polymeric IgM.

The cysteine at position 575 of the immunoglobulin mu heavy chain is thought to provide the only disulfide bonds joining the monomer subunits of mouse polymeric IgM. The importance of this cysteine in the assembly of polymeric IgM was investigated by using site-directed mutagenesis to produce mu chains with serine at position 575. Thirty percent of the secreted mutant IgM was covalently assembled polymer implying that cysteines other than Cys575 can form inter-subunit disulfide bonds. The polymeric IgM lacked J chain, mediated complement-dependent cytolysis and appeared to have a higher molecular weight than conventional IgM pentamers, as judged by sucrose gradient sedimentation and sodium dodecyl sulfate-polyacrylamide gel electrophoresis mobility. Electron microscopy revealed that the mutant IgM molecule contained six subunits. Wild-type IgM, while synthesized predominantly as a pentameric molecule, was assembled in at least two other forms, which were distinguished by their electrophoretic mobility. The apparently higher molecular weight forms of wild-type IgM include hexameric molecules which, like the hexameric mutant IgM, contained much less J chain that the pentameric form and were 20-fold more efficient at activating complement-dependent cytolysis.

Animals↗

Fabrication and characterization of poly(methyl methacrylate) microchannels by in situ polymerization with a novel metal template.

A stainless steel template for the fabrication of plastic microfluidic devices has been developed by photolithography and chemical etching technique. The preparation process of the template is simple, rapid, and low-cost. The cross sectional profiles of raised microchannels on the template are trapezoidal. The surface roughness of the templates was controlled down to 190 nm. The template can be used repeatedly to generate devices reproducibly. The microfluidic devices of poly(methyl methacrylate) (PMMA) were fabricated by in situ polymerization using the templates. The reproducibility of the fabricated microchannel is high and the relative standard deviation is 0.7% by the in situ polymerization approach. Some physical properties of the polymerized microchannels were characterized including the transparency, the thermal deformation temperature, and the dimensional information. Current monitoring was used to evaluate the electroosmotic flow within the microchannels under the electric field strength of 300 V/cm.

Equipment Design↗

Copolymerized polymeric surfactants: characterization and application in micellar electrokinetic chromatography.

An achiral monomeric surfactant (sodium 10-undecenyl sulfate, SUS) and a chiral surfactant (sodium 10-undecenoyl L-leucinate, SUL) were synthesized and polymerized individually to form poly-SUS and poly-SUL. These surfactants were then copolymerized at various molar ratios to produce a variety of copolymerized surfactants (CoPSs), possessing both achiral (sulfate) and chiral (leucinate) head groups. The CoPSs, poly-SUS, poly-SUL, and sodium dodecyl sulfate were characterized using several analytical techniques. The aggregation numbers of the polymeric surfactants and the partial specific volumes were determined by the use of fluorescence quenching and density measurements, respectively. These polymeric surfactants were investigated as novel pseudostationary phases in micellar electrokinetic chromatography (MEKC) for the separation of chiral and achiral solutes. Solute hydrophobicity was found to have major influence on the MEKC retention of alkyl phenyl ketones. In contrast, hydrogen-bonding ability of benzodiazepines is the major factor that governs their retention, but hydrophobicity has an insignificant effect on MEKC retention of benzodiazepines.

Benzodiazepines↗

Open-tubular capillary electrochromatography/electrospray ionization-mass spectrometry using polymeric surfactant as a stationary phase coating.

We describe the use of the polymeric surfactant poly(sodium undecylenic sulfate) (poly-SUS) as a stationary phase coating in open-tubular capillary electrochromatography (OT-CEC) coupled with electrospray ionization-mass spectrometry (ESI-MS) for the analysis of beta-blocker and benzodiazepine analytes. The production of a polymeric surfactant coating on the capillary inner wall involves (i) adsorption of the cationic polymer poly(diallyldimethylammonium chloride) (PDADMAC) to the inner surface of capillary, and (ii) adsorption of the negatively charged poly-SUS onto the cationic polymer layer via strong physical interaction of the two polymer layers. As compared with micellar electrokinetic chromatography (MEKC) coupled with ESI-MS, the main advantage of this proposed method is minimization of introduction of the monomeric or polymeric surfactant into the mass spectrometer, thus avoiding the interference of the nonvolatile micelle in ESI-MS. The effects of buffer pH and applied voltage on the separation of the analytes are also discussed. Under optimum conditions, four of the five beta-blockers and four benzodiazepines are separated.

Adrenergic beta-Antagonists↗

A simplified synthesis of polymeric nonparticulate stationary phases with macrocyclic antibiotic as chiral selector for capillary electrochromatography.

A simplified approach to synthesize nonparticulate (continuous or monolithic) beds with embedded vancomycin chiral selectors for capillary electrochromatography is proposed. In the present approach, N,N'-diallyltartardiamide monomer with diol functionality is used, which can be readily converted to aldehyde groups via periodate treatment. Parallel to the activation of the polymeric matrix for covalent attachment of vancomycin, the periodate treatment has shown secondary effects on the polymeric bed morphology, namely the increase of the average pore size and porosity of the skeleton. Inversed size-exclusion chromatography was applied to characterize porosimetric properties of the capillary columns before and after the periodate treatment. Electroosmotic and enantioselective properties of the nonparticulate beds synthesized are presented. The approach is of more general interest attaching different affinity groups to the polymeric matrix and/or enhancing the accessibility to the active sites, for instance, in the molecular imprinting technique.

Anti-Bacterial Agents↗