Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “GLASSES”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80Linked to original sources
PubMed1989

[Use of glass ionomer cement in surgery of the incus-stapedial joint. An initial report of experiences].

Chronic inflammations of the middle ear are characterised by perforation of the tympanic membrane as well as hearing loss, due to disintegration in the incudostapedial joint. Usually the perforation is easily restored by means of available modern procedures; on the other hand, failure of the reconstruction of the ossicular chain, especially of the incudostapedial joint, is not uncommon. Hence, the improvement of hearing capacity is transitory, since later, due to scars, graft lateralisation results in a dislocation of the primarily reconstructed ossicular chain. The patient's hearing capacity is then as poor as it has been before surgery. The aim of this study is to demonstrate the ways of satisfactory reconstruction of the incudostapedial joint by means of glass-ionomer cement: 1. Scar tissue connecting the ossicles in slight defects of the incudostapedial joint can be stabilised by glass-ionomer cement leading to a reasonable sound transmission. 2. If the incus has to be removed in case of a more serious defect, the columella can be properly fixed to the stapes by means of glass-ionomer cement without the risk of scar-induced lateralisation. 3. The fixation of the stapes prosthesis' wire loop to the incus can be effectively achieved by glass-ionomer cement.

Audiometry, Pure-Tone↗
PubMed2000

Resin-bonded, glass fiber-reinforced composite fixed partial dentures: a clinical study.

STATEMENT OF PROBLEM: Resin-bonded, glass fiber-reinforced composite fixed partial dentures (FPDs) have been under development for some time. There is a lack of data regarding the clinical usefulness of such prostheses. PURPOSE: The clinical performance of 31 resin-bonded, glass fiber-reinforced composite fixed partial dentures was evaluated in a preliminary study. MATERIAL AND METHODS: The prostheses were made to replace 1 to 3 missing maxillary or mandibular teeth in each of 31 patients. The prostheses had a framework made of continuous unidirectional E-glass fibers with multiphase polymer matrix and light-polymerized particulate composite resin veneering. The prostheses were examined after 6-month periods for up to 24 months (mean follow-up time was 14 months). Partial or total debonding of the prostheses or the framework fracture was considered a treatment failure. RESULTS: Two prostheses debonded during the follow-up period; 1 debonding was related to improper occlusal adjustment and the other to unknown reasons. Kaplan-Meier survival probability at 24 months was 93%. No framework fractures were observed. CONCLUSION: The results of this preliminary study suggest that the resin-bonded, glass fiber-reinforced FPDs may be an alternative for resin-bonded FPDs with a cast metal framework.

Child↗
PubMed1975

Lack of detectable change in cyclic AMP during the cardiac inotropic response to isoproterenol immobilized on glass beads.

Changes in contractility and the levels of adenosine 3':5'-cyclic monophosphoric acid (cAMP) were assessed in isolated cat cardiac muscle in response to soluble isoproterenol and isoproterenol immobilized on glass beads. Drug-induced positive inotropic responses were compared to the maximum isometric force achieved with paired electrical stimulation, a potent physiological inotropic stimulus. Isoproterenol (1 muM) in solution increased the force of contraction 0.832 plus or minus 0.165 g at 60 sec in eight muscles tested, which at 60 and 120 sec averaged 65.5 plus or minus 6.5% and 82.9 plus or minus 8.8%, respectively, of the force with paired electrical stimulation. Isoproterenol immobilized on glass beads gave positive inotropic responses similar to those for the soluble form of the drug. Placement of only three isoproterenol-glass beads on the muscles increased the force of contraction 0.742 plus or minus 0.166 g at 60 sec (n equals 11), which at 60 and 120 sec averaged 45.1 plus or minus 7.0% and 58.6 plus or minus 6.4%, respectively, of the force with paired electrical stimulation. The magnitude of this response indicates that the increased force was developed by at least 60% of the cells in each muscle. Control levels of cAMP were 0.527 plus or minus 0.049 pmol/mg of tissue wet weight, n equals 11. cAMP levels 60 sec after 1 muM soluble isoproterenol was added were 1.212 plus or minus 0.085 pmol/mg; in contrast, the levels of cAMP in response to isoproterenol immobilized on glass beads at 60 sec were 0.490 plus or minus 0.060 pmol/mg, not significantly different from control levels. These data indicate that cAMP may not be involved in the propagation of the inotropic response that must have occurred in these cardiac muscles and raise questions as to the physiological significance of the large cAMP increases that occur in response to soluble drugs and hormones.

Animals↗
PubMed2000

Activation of mitogen-activated protein kinase p38 and extracellular signal-regulated kinase is involved in glass fiber-induced tumor necrosis factor-alpha production in macrophages.

In a previous study, we demonstrated that the length of glass fibers was a critical determinant of fiber potency in induction of tumor necrosis factor (TNF)-alpha and that activation of NF-kappaB was an important factor in this response. In the present study, we analyzed the role of mitogen-activated protein (MAP) kinases in the induction of TNF-alpha by glass fibers. Glass fibers induced phosphorylation of MAP kinases, p38, and ERK in primary rat alveolar macrophages, and this phosphorylation was associated with TNF-alpha gene expression. Long fibers were more potent than short fibers in activation of MAP kinases. Results from mechanistic analysis support that MAP kinases activate transcription factor c-Jun. The activated c-Jun acts on the TNF-alpha gene promoter through two binding sites, the cyclic AMP response element and the activator protein 1-binding site. These results suggest that in addition to the NF-kappaB pathway for TNF-alpha production, glass fibers are able to activate c-Jun through MAP kinase pathways that lead to induction of TNF-alpha expression.

Animals↗
PubMed2001

Cytotoxicity of dental glass ionomers evaluated using dimethylthiazol diphenyltetrazolium and neutral red tests.

The purpose of this study was to assess the cytotoxicity of some commonly used glass ionomers. Three chemically cured glass ionomers (Fuji II, Lining cement, and Ketac Silver) and one light-cured (Fuji II LC) were tested. Extracts of mixed non-polymerized materials and polymerized specimens were prepared in accordance with ISO standard 10993-12. The polymerized specimens were cured and placed either directly in the medium (freshly cured), left for 24 h (aged), or aged plus ground before being placed in the medium. The cytotoxicity of extracts was evaluated on mouse fibroblasts (L, 929), using dimethylthiazol diphenyltetrazolium (MTT) and neutral red (NR) assays. Further, the concentrations of aluminum, arsenic and lead were analyzed in aqueous extracts from freshly cured and aged samples, and the fluoride levels analyzed in aqueous extracts from freshly cured samples. All extracts except that of non-polymerized Ketac Silver were rated as severely cytotoxic in both assays. Extracts of polymerized material were significantly more cytotoxic than extracts of non-polymerized material. All freshly cured glass ionomers released aluminum and fluoride concentrations far above what is considered cytotoxic (aluminum >0.2 ppm and fluoride >20 ppm). Extracts from freshly cured Lining Cement contained the highest concentrations of aluminum and fluoride (215 ppm and 112 ppm). Extracts from freshly cured Ketac Silver had the lowest concentrations of aluminum and fluoride but the highest of lead (100 ppm). It can be concluded that all extracts from non-cured, freshly cured, and aged glass ionomers contained cytotoxic levels of substances. Curing did not reduce the toxicity significantly.

Aluminum↗
PubMed2004

Mineralization of dentin induced by treatment with bioactive glass S53P4 in vitro.

Dentin hypersensitivity can be managed to occlude dentin tubules, but none of the agents used are components of natural dentin. Using a calcium phosphate precipitation (CPP) method, dentin tubules can be occluded with a calcium phosphate (CaP) layer similar to the major inorganic component of dentin. The CPP method utilizes acidic pH conditions, such as etching of dentin, over the course of several dental treatments. A gentler method can be used to produce a CaP layer on the surface of dentin. By treating with bioactive glass S53P4 (BAG), or regular commercial glass (CG), mineralization occurs in physiologically neutral solutions such as simulated body fluid (SBF) and remineralization solution (RMS). After a short period of immersion, silica is dissolved from both types of glass, but the amount of silica released is much greater from BAG than from CG. The dissolved silica is adsorbed on the surface of dentin during the pretreatment procedure and enhances the mineralization of dentin in SBF. After 14 days' mineralization the dentin is fully covered by the CaP layer, but after 14 days' immersion in RMS decalcification of the dentin occurs. Pretreatment with BAG decreases the degree of decalcification of dentin during the mineralization process. These findings suggest that bioactive glass S53P4 can be used as a therapeutic material for mineralization of dentin and its tubules in a physiological environment.

Adsorption↗
PubMed2004

Influence of chemo-mechanical caries removal on the surface topography of dental composite resin and glass-ionomer materials: an in vitro study.

The aim of the present study was to investigate the influence of a chemo-mechanical caries removal system, Carisolv gel, on the surface topography of dental filling materials. Thirty specimens of a composite resin (Spectrum) and a compomer (Dyract AP) and 60 specimens of a glass-ionomer (Ketac-Fil Plus) were prepared. The surface topography was investigated with an optical interferometer before and after chemical exposure for 5, 10, or 20 min. Each specimen acted as its own control. The topographical part of the glass-ionomer materials was performed in two series with different drying procedures, since this material exhibits a higher sensitivity to dehydration than the other materials. The surface topographical investigations were complemented with contact angle measurements. After Carisolv gel exposure the density of summits and the developed surface area ratio (3D/2D) were slightly smaller for the composite resin and the compomer. For the minimally dried glass-ionomer material, the results indicated a reduction of the height of the surface structures, as well as a surface area enlargement, after Carisolv gel exposure. No statistically significant changes of contact angles due to Carisolv gel exposure could be detected for any material investigated. If dental filling materials of composite resin or glass-ionomer materials are exposed to Carisolv gel, no or only minor surface topographical changes can be expected. n

Compomers↗
PubMed2005

Effect of 10 wt% spherical silica filler addition on the various properties of conventional and resin-modified glass-ionomer cements.

In this study, we evaluated the effects of 10 wt% spherical silica filler (SSF) addition on 24-h compressive strength, modulus of elasticity, water uptake, and immediate setting shrinkage of conventional glass-ionomer (Fuji II and Experimental) and resin-modified glass-ionomer (Fuji II LC EM) cements. The glass-ionomer cement powders were modified by being mixed with 10 wt% SSFs with an average particle diameter of 0.3 microm. The materials were mixed to consistencies similar to the flow of Fuji II mixed with a powder-liquid ratio of 2.7:1 (w/w). The 24-h compressive strength, modulus of elasticity, water uptake, and immediate setting shrinkage were observed and the results compared with the original materials mixed with similar flow. The addition of SSF increased the compressive strength value to 1.1 times, while the increase of moduli of elasticity was 1.10 to 1.35 times. In general, the addition of SSF decreased the 24-h water uptake to 80-90% and reduced the immediate setting shrinkage to 70-79% of the original materials. The addition of 10 wt% SSF improved the characteristics of conventional and resin-modified glass-ionomer cement.

Compressive Strength↗
PubMed2003

The effect of dissolved organic carbon on bacterial adhesion to conditioning films adsorbed on glass from natural seawater collected during different seasons.

Adhesion of three marine bacterial strains, i.e. Marinobacter hydrocarbonoclasticus, Psychrobacter sp. and Halomonas pacifica with different cell surface hydrophobicities was measured on glass in a stagnation point flow chamber. Prior to bacterial adhesion, the glass surface was conditioned for 1 h with natural seawater collected at different seasons in order to determine the effect of seawater composition on the conditioning film and bacterial adhesion to it. The presence of a conditioning film was demonstrated by an increase in water contact angle from 15 degrees on bare glass to 50 degrees on the conditioned glass, concurrent with an increase in the amount of adsorbed organic carbon and nitrogen, as measured by X-ray photoelectron spectroscopy. Multiple linear regression analysis on initial deposition rates, with as explanatory variables the temperature, salinity, pH and concentration of dissolved organic carbon (DOC) of the seawater at the time of collection, showed that the concentration of DOC was most strongly associated with the initial deposition rates of the three strains. Initial deposition rates of the two most hydrophilic strains to a conditioning film, increased with the concentration of DOC in the seawater, whereas the initial deposition rate of the most hydrophobic strain decreased with an increasing concentration of DOC.

Adhesiveness↗
PubMed2003

A comparison of mathematical methods for the determination of in vitro dissolution constants for glass fibers.

Biopersistence plays a significant role in determining the potential bioactivity of respirable fibers. In vivo biopersistence in the lung is frequently assessed by in vitro fiber dissolution studies using simulated biological solutions and flow-through techniques. The dissolution rate (k) of a fiber is typically determined by elemental analysis of the flow-through solution to measure the mass of material leached from the fibers over a given time. Various methods may be used to estimate the value of k from these results. The present study compared the in vitro dissolution characteristics of seven experimental glass fiber compositions to those obtained for four recognized fiber compositions (MMVF 10-glass fiber; MMVF 11-glass fiber; MMVF 21-rockwool fiber; crocidolite fiber). Fiber dissolution was examined over a 17-wk period using a flow-through system designed to simulate the conditions encountered by fibers in the extracellular environment of the lung. Mass loss and changes in fiber diameter were determined over time and were then used to calculate k using five different methods. Although the selected methodologies did not produce identical estimations of k for each fiber, the resulting ranking of fiber solubility for each method was consistent. The seven experimental glass fibers were found to have k values intermediate between those of MMVF 11 and MMVF 21.

Animals↗
PubMed1985

Matrix isolation of free radicals from carbohydrates. II. Reactions of H. with glucose and derivatives in acidic glasses.

Photolytically produced H.-atoms in 6 mol dm-3 H2SO4/H2O glasses trapped at 77 K react upon annealing to 130 K with dissolved carbohydrates to form carbon-located free radicals by abstraction of carbon-bound protons. Analysis of electron spin resonance (e.s.r.) spectra at various annealing stages from alpha- and beta-D-glucose together with 6,6-d2-D-glucose, 6-deoxy-D-glucose, 2-deoxy-D-glucose, glucose-1-phosphate, D-xylose, D-allose and D-mannose indicates radical formation at all possible carbon sites with a strong preference for C1 and a somewhat enhanced contribution of C4 over the statistical expectation. The corresponding component spectra are analysed either by spectra isolation or simulation and their parameters are given. Intramolecular radical transformation at temperatures of 140-160 K is explained by acid-catalysed H2O-elimination. The findings are discussed in relation to the radiation-chemistry of aqueous glucose solutions. We thus show that the system of photolyzed Fe2+ in acidic glasses at low temperatures containing 10 mmol dm-3 carbohydrate is suitable for studying H(D.)-reactions by means of e.s.r. spectroscopy. Unlike previously used glasses containing carbohydrates, contributions of oxidation and reduction by direct effects or mixtures of direct and indirect effects and phase-effects due to incomplete glass formation are avoided.

Carbohydrates↗
PubMed2001

Leaching behavior and characteristics of glass components and surrogate nuclides in radioactive vitrified waste forms.

Several vitrified waste forms were fabricated and characterized, which contain simulated radioactive waste incineration ash, and a long-term leaching test was conducted by an ISO method for 820 days to assess the chemical durability of vitrified waste forms. Two semi-empirical mechanism models were applied to find out the dominant leaching mechanism of glass elements. For glass elements, dissolution associated with diffusion was the dominant leaching mechanism and leaching characteristics also depend upon solubilities of components. A type of prediction model was applied to observe the long-term leaching behavior of major glass elements and surrogates. Diffusion coefficients and dissolution rate constants, the main parameters in the long-term prediction model, were obtained for glass elements and surrogate nuclides using experimental data for short and long-term periods. The model could be used to predict long-term behavior of such elements to observe and assess the stability of vitrified waste forms.

Diffusion↗
PubMed1969

Cells involved in the immune response. X. The transfer of antibody-forming capacity to irradiated rabbits by antigen-reactive cells isolated from normal allogeneic rabbit bone marrow after passage through antigen-sensitized glass bead columns.

The antigen-reactive cells in normal rabbit bone marrow could be isolated from a suspension of marrow cells by passage of the cells through an antigen-sensitized glass bead column. The cells which passed through the column were deficient in antigen-reactive cells directed to the antigen used to sensitize the glass beads, whereas the cells eluted from the column could transfer antibody-forming capacity to irradiated recipients only with respect to the specific sensitizing antigen. Separation of the bone marrow antigen-reactive cells could not be achieved by passage of the cells through nonsensitized glass bead columns or in the presence of excess free antigen in the column. Cells which were retained by, and later eluted from, the antigen-sensitized glass bead columns were mostly small mononuclear cells, whereas cells which passed through the columns were morphologically similar to the original unfractionated bone marrow cell suspension. The data indicate the presence of an antibody or antibody-like structure, with defined immunological specificity, on the surface of the normal bone marrow antigen-reactive cell.

Animals↗
PubMed1983

In vitro differentiation of human monocytes. Monocytes cultured on glass are cytotoxic to tumor cells but monocytes cultured on collagen are not.

Cultivation of human blood monocytes on glass gives rise to cells nonspecifically cytotoxic to tumor cells. If the monocytes are cultured on collagen gels with no contact with glass, no such cytotoxic activity is induced. Killing appeared to be extracellular and probably contact dependent. The glass-induced cytotoxic activity was not related to protein content or cell viability. Rather, it appeared that the monocytes cultured on glass differentiated into cells resembling activated macrophages. On the other hand monocytes cultured on collagen differentiated into cells resembling resident tissue macrophages. These observations are compatible with numerous studies carried out in rodents, showing that activated macrophages, and not resident cells, are cytotoxic to tumor cells.

Adult↗
PubMed2000

Evaluation of osteoblast response to porous bioactive glass (45S5) substrates by RT-PCR analysis.

Previous studies have shown that neonatal rat calvaria osteoblasts elaborate substantial amounts of extracellular material with bone-like characteristics when cultured on porous bioactive glass substrates in vitro. However, the osteoblastic response to this material has not been fully characterized. The objective of this study was to characterize osteoblast response to porous bioactive glass substrates following the expression of the classical markers for osteoblast differentiation. In this study we synthesized porous bioactive glass substrates, seeded them with osteoblast-like cells (ROS 17/2.8) and followed the temporal expression of alkaline phosphatase (AP) activity, as well as the expression of mRNA for collagen type I (Coll-1), osteonectin (OSN), osteopontin (OPN), osteocalcin (OCN), and bone sialoprotein (BSP). The data confirm that porous bioactive glass substrates are capable of supporting the in vitro growth and maturation of osteoblast-like cells. At a porosity of 42% and an average pore size of 80 microm, the substrates promote the expression and maintenance of the osteoblastic phenotype. The results additionally suggest that there is both a solution-mediated and a surface-controlled effect on cell activity.

Alkaline Phosphatase↗
PubMed1985

Pulmonary response of hamsters to fibrous glass: chronic effects of repeated intratracheal instillation with or without benzo[a]pyrene.

Syrian golden hamsters were given intratracheal instillations of glass fibres with or without benzo[a]pyrene suspended in saline, once a fortnight for 52 weeks. The experiment was terminated at week 85. 'Silicotic granulomas' consisting of tightly packed, iron-positive macrophages filled with glass fibres and surrounded by a layer of alveolar epithelial cells were the predominant pulmonary lesion. No mesotheliomas or other tumours of the respiratory tract were observed in hamsters treated with glass fibres alone. There was no indication that glass fibres enhanced the development of respiratory tract tumours induced by benzo[a]pyrene. In hamsters similarly exposed to crocidolite fibres with or without benzo[a]pyrene no mesotheliomas or other respiratory tract tumours were observed either. An explanation for the absence of pulmonary tumours might be that repeated administration of fibres over a period of 52 weeks entails an acute pulmonary reaction after each administration with the implication that the fibres cannot settle down well enough to be able to induce tumours. Another possible explanation is the relatively short duration of the experimental period.

Animals↗
PubMed1996

Orthodontic bonding with glass ionomer cement--a review.

Orthodontic bonding with glass ionomer cement is comparatively new. The purpose of this article is to review the current literature covering both in vitro and in vivo studies of various glass ionomer cements that have been used for orthodontic bonding. The review indicates that there is little support in the literature to suggest that the currently available conventional glass ionomer cements are suitable for routine clinical use in orthodontics. Dual- or tri-cured hybrid materials, however, comprising both glass ionomer and resin components, appear to have greater potential with regard to clinical performance.

Dental Bonding↗
PubMed1998

Use of glass-ionomers for bracket bonding--an ex vivo study evaluating a testing device for in vivo purposes.

Seven glass-ionomer cements were tested and compared with a composite resin in order to find the glass-ionomer cement with the highest bond strength to enamel with normal anatomy and composition (not ground). Five types of surface treatment were used. The results show that Aqua Cem and Ketac Cem, both water-hardening, present the highest bond strength, followed by the conventional glass-ionomer cement Fuji IIF. Surface treatment according to the manufacturers' instructions and surface treatment with polyacrylic acid were found to give rise to the highest bond strength for all of the seven cements. However, none of the glass-ionomer cements reached the values for the composite resin Concise. The testing instrument designed for ex vivo purposes measured with high precision and accuracy and with a low methodological error.

Acrylic Resins↗