Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “biodegradable plastics”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources
PubMed1984

Shake flask biodegradation of 14 commercial phthalate esters.

An acclimated shake flask CO(2) evolution test was used to study the biodegradability of 14 commercial phthalate esters that are commonly used as plasticizers. Both CO(2) evolution (ultimate biodegradation) and loss of parent phthalate esters (primary biodegradation) were measured. With only a few exceptions, primary biodegradation was 90% or higher, and ultimate biodegradation was in excess of 55% of theoretical results in 28 days. The results showed that all of the commercial phthalate esters were susceptible to biodegradation by mixed populations of microorganisms from natural sources. The results also provide considerable insight into the utility and reproducibility of a standard biodegradation test that is being recommended for widespread screening of chemicals.

Journal Article↗
PubMed2004

Biodegradability of wheat gluten based bioplastics.

A large variety of wheat gluten based bioplastics, which were plasticized with glycerol, were subjected to biodegradation. The materials covered the total range available for the biochemical control parameter Fi, which expresses the percentage of aggregated proteins. This quantity can be related to the density of covalent crosslinks in the wheat gluten network, which are induced by technological treatments. The biodegradability tests were performed in liquid medium (modified Sturm test) and in farmland soil. All gluten materials were fully degraded after 36 days in aerobic fermentation and within 50 days in farmland soil. No significant differences were observed between the samples. The mineralization half-life time of 3.8 days in the modified Sturm test situated gluten materials among fast degrading polymers. The tests of microbial inhibition experiments revealed no toxic effects of the modified gluten or of its metabolites. Thus, the protein bulk of wheat gluten materials is non-toxic and fully biodegradable, whatever the technological process applied.

Biocompatible Materials↗
PubMed2001

Degradation of natural and synthetic polyesters under anaerobic conditions.

Often, degradability under anaerobic conditions is desirable for plastics claimed to be biodegradable, e.g. in anaerobic biowaste treatment plants, landfills and in natural anaerobic sediments. The biodegradation of the natural polyesters poly(beta-hydroxybutyrate) (PHB), poly(beta-hydroxybutyrate-co-11.6%-beta-hydroxyvalerate) (PHBV) and the synthetic polyester poly(epsilon-caprolactone) (PCL) was studied in two anaerobic sludges and individual polyester degrading anaerobic strains were isolated, characterized and used for degradation experiments under controlled laboratory conditions. Incubation of PHB and PHBV films in two anaerobic sludges exhibited significant degradation in a time scale of 6-10 weeks monitored by weight loss and biogas formation. In contrast to aerobic conditions, PHB was degraded anaerobically more rapidly than the copolyester PHBV, when tested with either mixed cultures or a single strained isolate. PCL tends to degrade slower than the natural polyesters PHB and PHBV. Four PHB and PCL degrading isolates were taxonomically identified and are obviously new species belonging to the genus Clostridium group I. The depolymerizing enzyme systems of PHB and PCL degrading isolates are supposed to be different. Using one isolated strain in an optimized laboratory degradation test with PHB powder, the degradation time was drastically reduced compared to the degradation in sludges (2 days vs. 6-10 weeks).

Anaerobiosis↗
PubMed2004

Chemical valorization of forest and agricultural by-products. Obtention, chemical characteristics, and mechanical behavior of a novel family of hydrophobic films.

Esterification of hemicelluloses of the xylan family was performed in order to produce hydrophobic films. Acylation reactions were carried out with lauroyl chloride in the N,N-dimethylacetamide/lithium chloride homogeneous system using 4-dimethylaminopyridine as activator and were induced by microwave irradiation. In the experimental conditions used, 108 and 172% mass ratios were obtained for the dodecyl-grafted xylan and heteroxylan, respectively. The degrees of substitution (DS) were 1.3 (maximum 2) for xylan and 1.2 (maximum 2.1) for heteroxylan. These products were further characterized by FT-IR spectroscopy. The mechanical and thermomechanical behavior of this new family of hydrophobic films were analyzed and compared to those obtained from cellulose with a similar DS by the means of tensile tests. Our results indicate that the dodecyl-grafted xylan film presents the best rigidity-resistance to traction ratio.

Agriculture↗
PubMed2026

The global potential of freshwater microbes for plastic degradation.

Plastic pollution is becoming increasingly severe on a global scale, and the potential for biodegradation as a treatment method that is environmentally friendly merits greater attention. A significant number of genes that associated the degradation of plastic (PDAGs) have been identified, however, the distribution of these genes among microorganisms in global inland waters remains to be elucidated. A global-scale meta-analysis was conducted, incorporating approximately 1000 metagenome datasets of inland waters across seven continents. A total of 13,109 metagenome-assembled genomes (MAGs) were obtained by means of metagenomics binning, and 22,621 PDAGs were identified from these. Among these recognized PDAGs, phenylacetaldehyde dehydrogenase (PAD) was the most dominant (n = 16,664), followed by catalase (n = 5931). The predominant hosts for PAD and catalase were identified as Gamma-proteobacteria and Bacteroidia, respectively. The largest number of both PAD and catalase was found in MAGs from North America, while the average gene number in single MAG was highest in MAGs from Oceania. In accordance with the prediction of traits, PDAG-carrying MAGs from Europe demonstrated the fastest growth rate and the lowest optimal growth rate. Furthermore, 25 styrene monooxygenase (StyA) enzymes were identified, which were found to cluster into two distinct groups hosted by Alpha-proteobacteria and Gamma-proteobacteria, respectively. Moreover, 11 MAGs were observed to possess the complete pathway of polystyrene degradation. These results explored the potential of inland water microorganisms as a biological resource for plastic degradation and provided valuable microbial reference information that can be used to develop biological treatment technologies for mitigating plastics.

Plastics↗
PubMed1999

Polyhydroxybutyrate: plastic made and degraded by microorganisms.

Polyhydroxybutyrate (PHB) offers many advantages over traditional petrochemically derived plastics. In addition to its complete biodegradability, PHB is formed from renewable resources. It possesses better physical properties than polypropylene for food packaging applications and is completely nontoxic. The poor low-impact strength of PHB is solved by incorporation of hydroxyvalerate monomers into the polymer to produce polyhydroxybutyrate-co-valerate (PHBV), which is commercially marketed under the trade name Biopol. Like PHB, PHBV completely degrades into carbon dioxide and water under aerobic conditions. Microbial synthesis of PHB is the best method for industrial production because it ensures the proper stereochemistry for biodegradation. Microorganisms synthesize and store PHB under nutrient-limited conditions and degrade and metabolize it when the limitation is removed. Current production employs Alcaligenes eutrophus because it grows efficiently on glucose as a carbon source, accumulates PHB up to 80% of its dry weight, and is able to synthesize PHBV when propionic acid is added to the feedstock. PHBV is currently 16 times the price of polypropylene. However, the development of transgenic PHA-producing organisms is expected to greatly reduce its cost. Benefits of using transgenic systems include lack of a depolymerase system, ability to use faster-growing organisms, production of highly purified polymers, and ability to utilize inexpensive carbon sources. Because transgenic plants may someday result in the evolution of plastic crops that could lower the price of PHA to a competitive level, future research will surely focus on such recombinant DNA techniques.

Bacteria↗
PubMedDate not supplied

Recent advances in polyhydroxyalkanoate production by bacterial fermentation: mini-review.

Poly(3-hydroxybutyrate) [P(3HB)] and other polyhydroxyalkanoates (PHAs) have been drawing much attention as biodegradable substitutes for conventional nondegradable plastics. For the economical production of P(3HB), various bacterial strains, either wild-type or recombinant, and new fermentation strategies were developed for the production of P(3HB) with high concentration and productivity. To reduce the cost of carbon substrate, several processes for P(3HB) production from cheap carbon sources were also developed. P(3HB) can now be produced to a content of 80% of cell dry weight with the productivity greater than 4 g/l per h. Fermentation strategy was also developed for the efficient production of medium chain length PHA by high cell density culture. With all these advances, P(3HB) and PHAs can be produced by bacterial fermentation at a cost (ca. $2/kg) similar to that of other biodegradable polymers under development.

Bacteria↗
PubMed1997

Potentially useful materials for biodegradable ureteric stents.

OBJECTIVES: To develop and test materials that may be useful in the design and further development of biodegradable ureteric stents. MATERIALS AND METHODS: Specimens of two plastics were placed in artificial urine of different pH for 30 days to examine the degree of dissolution of the plastic in alkaline and the stability in acidic conditions. RESULTS: The specimens remained stable in the artificial urine at pH < 7.0 for 30 days and dissolved completely at a pH > or = 7 within 48 h. CONCLUSION: Plastics can be designed which may be useful in the further development of biodegradable ureteric stents. The rate of dissolution could be changed by influencing urinary pH.

Biodegradation, Environmental↗
PubMed1998

Polyhydroxyalkanoates, biopolyesters from renewable resources: physiological and engineering aspects.

Polyhdroxyalkanoates (PHAs), stored as bacterial reserve materials for carbon and energy, are biodegradable substitutes to fossil fuel plastics that can be produced from renewable raw materials. PHAs can be produced under controlled conditions by biotechnological processes. By varying the producing strains, substrates and cosubstrates, a number of polyesters can be synthesized which differ in monomer composition. By this means, PHAs with tailored interesting physical features can be produced. All of them are completely degradable to carbon dioxide and water through natural microbiological mineralization. Consequently, neither their production nor their use or degradation have a negative ecological impact. After a historical review, possibilities for the synthesis of novel PHAs applying different micro-organisms are discussed, and pathways of PHA synthesis and degradation are shown in detail for important PHA producers. This is followed by a discussion of the physiological role of the accumulation product in different micro-organisms. Detection, analysis, and extraction methods of PHAs from microbial biomass are shown, in addition to methods for polyester characterization. Strategies for PHA production under discontinuous and continuous regimes are discussed in detail in addition to the use of different cheap carbon sources from the point of view of different PHA producing strains. An outlook on PHA production by transgenic plants closes the review.

Bacteria↗
PubMedDate not supplied

Designing new materials from wheat protein.

We recently discovered that wheat gluten could be formed into a tough, plasticlike substance when thiol-terminated, star-branched molecules are incorporated directly into the protein structure. This discovery offers the exciting possibility of developing biodegradable high-performance engineering plastics and composites from renewable resources that are competitive with their synthetic counterparts. Wheat gluten powder is available at a cost of less than dollars 0.5/lb, so if processing costs can be controlled, an inexpensive alternative to synthetic polymers may be possible. In the present work, we demonstrate the ability to toughen an otherwise brittle protein-based material by increasing the yield stress and strain-to-failure, without compromising stiffness. Water absorption results suggest that the cross-link density of the polymer is increased by the presence of the thiol-terminated, star-branched additive in the protein. Size-exclusion high performance liquid chromatography data of molded tri-thiol-modified gluten are consistent with that of a polymer that has been further cross-linked when compared directly with unmodified gluten, handled under identical conditions. Remarkably, the mechanical properties of our gluten formulations stored in ambient conditions were found to improve with time.

Absorption↗
PubMed2005

Origin of 2-ethylhexanol as a VOC.

2-Ethylhexanol has been identified as a volatile organic compound (VOC) that contributes to the deterioration of indoor air quality. Plasticizers are common components of dust and building materials and are shown to be degraded by a variety of bacteria and fungi to produce 2-ethylhexanol and other metabolites. Of these, the 2-ethylhexanol has significant volatility and was observed in appreciable quantities. The degree to which 2-ethylhexanol is observed as a VOC in air samples would be limited by the fact that many of the microorganisms that are capable of producing this compound are also able to oxidize it to 2-ethylhexanoic acid, which is much less volatile. It is argued that an abiotic degradation mechanism of plasticizers that results in the generation of 2-ethylhexanol is unlikely and, if this did occur, other metabolites should have been observed. Thus, the microbial degradation of plasticizers is the most likely source of 2-ethylhexanol in indoor air.

Air Microbiology↗
PubMed1999

Tensile properties and water absorption of zein sheets plasticized with oleic and linoleic acids.

Corn zein has been investigated for fabrication of biodegradable packaging materials. Our objective was to investigate the effect of added plasticizers, oleic and linoleic acids, on tensile properties and water absorption of zein sheets. Moldable resins were precipitated from aqueous ethanol dispersions of zein and fatty acids and rolled into sheets of approximately 0.5 mm in thickness. To increase plasticization effects, zein-oleic acid sheets were replasticized by heating them in fatty acid baths. Plasticization resulted in flexible sheets of high clarity, low modulus, and high elongation and toughness, although low tensile strength. Water absorption of zein sheets was lowered by plasticization, attributed in part to reduced mass fraction of zein. Polymerization of linoleic acid may have sealed off pores on sheet surfaces, thus slowing water absorption.

Absorption↗
PubMed2004

Degradation of microbial polyesters.

Microbial polyhydroxyalkanoates (PHAs), one of the largest groups of thermoplastic polyesters are receiving much attention as biodegradable substitutes for non-degradable plastics. Poly(D-3-hydroxybutyrate) (PHB) is the most ubiquitous and most intensively studied PHA. Microorganisms degrading these polyesters are widely distributed in various environments. Although various PHB-degrading microorganisms and PHB depolymerases have been studied and characterized, there are still many groups of microorganisms and enzymes with varying properties awaiting various applications. Distributions of PHB-degrading microorganisms, factors affecting the biodegradability of PHB, and microbial and enzymatic degradation of PHB are discussed in this review. We also propose an application of a new isolated, thermophilic PHB-degrading microorganism, Streptomyces strain MG, for producing pure monomers of PHA and useful chemicals, including D-3-hydroxycarboxylic acids such as D-3-hydroxybutyric acid, by enzymatic degradation of PHB.

3-Hydroxybutyric Acid↗
PubMedDate not supplied

Release of albumin from oligoester plastic matrices: effect of magnesium oxide and bivalent stearates.

Biodegradable implantable matrices containing bovine serum albumin were prepared from oligoesters by melting, and subsequently tested on in vitro albumin release. The linear poly (DL-lactic acid) and the branched terpolymer of DL-lactic acid, glycolic acid, and mannitol were synthesized. Products were of similar molecular weight and possessed different thermal and swelling characteristics. Oligoesters were loaded with 4% albumin and plasticized by 30% triacetin. Other additives added into the matrices as albumin stabilizers were divalent stearates and magnesium oxide. The influences of oligomer molecules constitution, divalent ion stearates or magnesium oxide addition, and triacetin concentration on the albumin release were quantified. SDS-PAGE revealed protein hydrolysis during the dissolution tests.

Albumins↗
PubMed2006

Aerobic production of activated sludge polyhydroxyalkanoates from nutrient deficient wastewaters.

It was found that aerobic strategies combined with multiple nutrient limitations produced greater quantities of polyhydroxyalkanoates (PHAs) than strategies relying on oxygen limitation (either microaerophilic or anaerobic/aerobic). This was true both for a synthetic wastewater composed of acetic and propionic acid, and also for a nutrient deficient industrial wastewater. PHA/substrate yields were shown to be comparable to axenic systems for many operating strategies analyzed, and it was found that PHA composition could be affected by process operational conditions. The molecular weight and melting point of the PHA produced were found to be in a desirable range with respect to material properties, which have not been well studied in the previous literature for mixed cultures (Salehizadeh and Van Loodsrecht, 2004). The effects of process staging, multiple treatment cycles, and inocula source were also addressed.

Bacteria, Aerobic↗