Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “THIOBACILLUS”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources

Properties and regulation of ribulose diphosphate carboxylase from Thiobacillus novellus.

Ribulose-diphosphate carboxylase from Thiobacillus novellus has been purified to hemogeneity as observed by polyacrylamide gel electrophoresis and U.V. light observation during sedimentation velocity analysis. The optimum pH for the enzyme with Tris-HCl buffers was about 8.2. Concentrations of this buffer in excess of 80 mM were inhibitory. The apparent Km for RuDP was about 14.8 muM with a Hill value of 1.5, for HCO3- the apparent Km was about 11.7 mM with an n value of 1.18 and for Mg2+ about 0.61 mM. The enzyme was specific for this cation. Relatively high concentrations of either Hg2+ or pCMB were required before significant inhibition was observed. Activity declined slowly during a 4-hr incubation period in either 3.0 M or 8.0 M urea. Incubation for 12 hrs resulted in complete loss of activity which was not prevented by 10 mM Mg2+ and was not reversed by dialysis and subsequent addition of 10 mM cysteine. Polyacrylamide gel electrophoresis revealed a loss of the major band and the appearance of 2 new bands. SDS polyacrylamide gel electrophoresis gave an average M.W. of 73500 +/- 2500 for the slower moving band and 12250 +/- 2500 for the faster moving. However, incubation in urea for up to 40 hrs revealed a decrease in the M.W. of the slower moving band to about 60000. The Ea for the enzyme was calculated to be about 18.85 kcal mole-1, with the possibility of a "break" between 40 and 50 degrees C. The Q10 was 3.07 between 20 and 30 degrees C whereas between 30 to 40 degrees C it was 3.31. Only phosphorylated compounds caused significant inhibition of enzyme activity. They included ADP, FDP, F6P, G6P, PEP, 6PG, 2-PGA, R1P, R5P, and Ru5p.

Carbon Dioxide↗

The uptake and assimilation of sulphate by Thiobacillus ferrooxidans.

Sulphate was rapidly bound by cell suspensions of Thiobacillus ferrooxidans. The binding was depressed by tetrathionate but was unaffected by Group VI anions, cysteine or methionine. Increasing uptake of sulphate was observed in cell suspensions incubated in the presence of ferrous iron. The bulk of 35S-sulphate was removed from the organisms by washing with dilute sulphuric acid and the remaining label was incorporated into cold trichloroacetic acid-soluble compounds. 35S-labelled adenosine 5'-sulphatophosphate was produced from ATP and 35S-sulphate by cell suspensions and in cell-free extracts. There was no evidence for the production of adenosine 3'-phosphate 5'-sulphatophosphate assayed by a very sensitive bioluminescence method.

Adenine Nucleotides↗

Sulfur metabolism in Thiobacillus denitrificans evidence for the presence of a sulfite reducatase activity.

The relatively high specific sulfite reductase activity of 25 mU/mg protein was found in extracts from Thiobacillus dentrificans. The absorption spectrum of the partially pruified enzyme was similar to the siroheme containing sulfite reductases from other sources. It is suggested that the T. denitrificans sulfite reductase may function during the oxidation of reduced sulfur compounds.

Aerobiosis↗

Heterotrophic growth of Thiobacillus A2 on sugars and organic acids.

Thiobacillus A2 grew on a number of organic acids, pentoses, hexoses and alpha-linked disaccharides, but not on beta-linked disaccharides or galactosides. Growth was slow on glucose, although fast-growing strains were selectively isolated. Additive growth rates occured on glucose and galactose; growth on glucose with fructose, pyruvate or gluconate was biphasic rather than diauxic; fructose was used preferentially over glucose; slow growth on glucose was accelerated by some disaccharides; growth on acetate, fumarate or succinate with glucose gave diauxic growth with preferential use of the acid and repression of glucose incorporation. Acetate and succinate tended to be used preferentially even with cultures grown on them in mixture with fructose or sucrose.

Acetates↗

Purification and characterization of the phosphoenolpyruvate carboxylase from the facultative chemolithotroph Thiobacillus novellus (ATCC 8093).

Phosphoenolpyruvate carboxylase (EC4.1.1.31), which catalyzes the carboxylation of phosphoenolpyruvate to produce oxaloacetate was purified 465-fold from extracts of organotrophically grown Thiobacillus novellus. Nondenaturing polyacrylamide gel electrophoresis (PAGE) of the purified enzyme revealed the presence of two bands after staining with Buffalo Black. Gels stained with Fast Violet B after incubation with PEP, HCO3-, Mg2+ and acetyl CoA also showed two bands of activity with the faster moving the more active of the two. Sodium dodecylsulfate (SDS)-PAGE of the enzyme heated at 100 degrees C for 5 min revealed the presence of three intensely stained bands of M(r) 95 K, 51 K, and 28 K. However, electrophoresis of the enzyme heated for 2 min showed a single band of about 100 K, indicating that the preparation was likely homogeneous. The 51 K and 28 K subunits are thus products of the 95 K subunit. Gel filtration studies of the native enzyme yielded a M(r) of 360 K. Therefore, the enzyme is a tetramer. The optimum pH in Tris buffer was 8.0, with Km for PEP 0.64 mM, HCO3- 0.11 mM, and acetyl CoA a potent activator, 1.3 microM. A divalent cation best served by Mg2+ gave sigmoidal initial velocity plots. Hill plots of the data gave coefficients (nH) of 2.6. None of the metabolites tested, nucleotide triophosphates excepted, significantly affected enzyme activity. Binding studies with 14C-labelled PEP revealed the binding of about 20 moles PEP per mole (360,000 g) of PEPC. Initial velocity studies suggest that the reaction is catalyzed by a random Bi Bi mechanism. Despite the lack of inhibition by certain metabolites, the enzyme's function is probably anaplerotic.

Acetyl Coenzyme A↗

Stability of copper tolerance in Thiobacillus ferrooxidans.

A strain of Thiobacillus ferrooxidans MAL-4-1 was adapted to grow at higher concentrations of copper by repeated subculturing in the presence of increasing levels of added cupric ions in 9K medium. The strains adapted to copper were found to be more efficient in bioleaching of copper from concentrates. When copper tolerant strains were back cultured repeatedly in 9K medium without cupric ions, the initially developed metal tolerance was observed to be lost. This indicates that the copper tolerance developed is stress-dependent and not a permanent trait of the adapted strain.

Copper↗

Identification of the purA gene encoding adenylosuccinate synthetase in Thiobacillus ferrooxidans.

The purA gene of Thiobacillus ferrooxidans encoding adenylosuccinate synthetase [EC 6.3.4.4] was identified in the upstream region of the iro gene encoding Fe(II)-oxidase (J. Biol. Chem 267:11242-11247, 1992). The purA gene consisted of 1290 base-pairs, which translated into a 29-amino-acid protein. The gene is functionally active, because it is able to complement an Escherichia coli purA-deficient strain. The deduced gene product has a high degree (60.9%) of sequence identity with that (432 aa) of E. coli purA gene, and both the products share GDEGKGK-DETG-TKLD sequences which are supposed to be GTP-binding domain. The downstream region of the iro gene contained another open-reading frame (ORF) of 1218 bp, and this showed high homology (56.6% over 249 bp) with E. coli ORF-II, which is found as a second ORF and truncated form in the downstream region of the purA gene. Comparison of the gene organization in the flanking region of purA gene between T. ferrooxidans and E. coli is also described.

Adenylosuccinate Synthase↗

Oxidation of stibnite by Thiobacillus ferrooxidans.

Optimum pH, temperature and pulp density for microbiological leaching of museum-grade stibnite mineral has been investigated using a stibnite-adapted strain of Thiobacillus ferrooxidans. Optimum conditions were found to be pH 1.75, 35 C and 12g solid substrate per 100 ml of basal salts medium as the initial dose. The energy of activation was determined to be 16.8 kcal per mole, and the temperature coefficient 2.2. The highest total dissolved antimony concentration, [Sbt] = [Sb+3] + [sb+5] + I1SbO2+], was about 1400 mg/litre, due to relatively low solubility of (SbO)2SO4 and (SbO2)2SO4.

Antibodies↗

An evaluation of the outer membrane charge and softness of Thiobacillus ferrooxidans by the Ohshima's electrophoretic model of a "soft" particle.

The surface charge of bacterial cells plays an important role in their interfacial physiology and adhesion to substrata mediated by the electrostatic double-layer interaction. The surface charge or potential of biological cells is generally calculated from the experimentally measurable electrophoretic velocity of these cells migrating in an external electric field, applying the well-known Smoluchowski equation which is valid for "hard" particles with a sharp interface. However, bacterial cells possessing a structured outer membrane of a finite thickness (dependent on the ionic strength and pH of the surrounding liquid medium) are expected to obey Ohshima's electrophoretic mobility equation derived recently for "soft" particles. The electrophoretic mobility of Thiobacillus ferrooxidans was measured here by the fully automated technique of electrophoretic light scattering, based on the proportionality between the mobility and the Doppler shift in the frequency of light scattered by electrophoresing cells. Agreement was obtained between the experimentally determined electrophoretic mobility expressed as a function of low ionic strength (60-6000 mumol/L) at different pH values and the best-fit theoretical predictions of the "soft" particle electrophoresis theory, which is better than in the case of applying the Smoluchowski formula. The best-fit surface-charge and softness parameters predict a rather rigid and low-charge outer membrane of the bacterium examined, as compared to the parameters obtained for other bacteria in media of high ionic strength.

Cell Membrane↗

Identification and localization of the carboxysome peptide Csos3 and its corresponding gene in Thiobacillus neapolitanus.

Four genes encoding carboxysome shell peptides (csoS1A, csoS1B, csoS1C, csoS2), the genes encoding the large and small subunits of RuBisCO (cbbL, cbbS), and three unidentified ORFs constitute an operon in Thiobacillus neapolitanus. An unidentified ORF 1.54 kb in size is predicted from sequence analysis to encode a protein with a molecular mass of approximately 57 kDa. When this ORF was expressed in Escherichia coli under the control of its endogenous ribosome-binding site, no peptide product was observed. In order to correlate this ORF with a carboxysome peptide, the ORF was overexpressed in E. coli by cloning it into pProExHTb, a prokaryotic expression vector containing an E. coli ribosome binding site. When antibodies raised against the recombinant protein were used to probe an immunoblot containing carboxysome peptides, a 60-kDa peptide was recognized. The peptide was subsequently named CsoS3. CsoS3 is a minor component of the carboxysome; a peptide of this size is commonly not observed or is very faint on Coomassie blue-stained SDS-polyacrylamide gels of purified carboxysomes. Immunogold labeling established CsoS3 to be a component of the carboxysome shell.

Amino Acid Sequence↗

Evidence for two pathways of thiosulfate oxidation in Starkeya novella (formerly Thiobacillus novellus).

The pathway of thiosulfate oxidation in the facultatively chemolithotrophic, sulfur-oxidizing bacterium Starkeya novella (formerly Thiobacillus novellus) has not been established beyond doubt. Recently, isolation of the sorAB genes, which encode a soluble sulfite:cytochrome c oxidoreductase, has been reported, indicating that a thiosulfate-oxidizing pathway not involving a multienzyme complex may exist in this organism. Here we report the cloning and sequencing of the soxBCD genes from S. novella, which are closely related to the corresponding genes encoding the thiosulfate-oxidizing multienzyme complex from Paracoccus pantotrophus. These findings suggest two distinct pathways for thiosulfate oxidation in S. novella. The expression of sorAB and soxC in cells grown on thiosulfate- and/or glucose-containing media was studied by Western blot analysis. The results showed that the SorAB protein is synthesized in the presence of thiosulfate irrespective of the presence of glucose. In contrast, the SoxC protein is subject to repression by glucose; the repression, however, appears to be dependent on the relative amounts of glucose and thiosulfate present. The regulatory effects observed for the expression of sorAB are likely to be mediated by an extracytoplasmic function sigma factor encoded by the sigE gene identified upstream of sorAB.

Amino Acid Sequence↗

Purification and characterization of the hydrogenase from Thiobacillus ferrooxidans.

Hydrogenase of Thiobacillus ferrooxidans ATCC 19859 was purified from cells grown lithoautotrophically with 80% hydrogen, 8.6% carbon dioxide, and 11.4% air. Hydrogenase was located in the 140,000 x g supernatant in cell-free extracts. The enzyme was purified 7.3-fold after chromatography on Procion Red and Q-Sepharose with a yield of 19%, resulting in a 85% pure preparation with a specific activity of 6.0 U (mg protein)-1. With native PAGE, a mol. mass of 100 and 200 kDa was determined. With SDS-PAGE, two subunits of 64 (HoxG) and of 34 kDa (HoxK) were observed. Hydrogenase reacted with methylene blue and other artificial electron acceptors, but not with NAD. The optimum of enzyme activity was at pH 9 and at 49 degrees C. Hydrogenase contained 0.72 mol nickel and 6.02 mol iron per mol enzyme. The relationship of the T. ferrooxidans hydrogenase to other proteins was examined. A 9.5-kb EcoRI fragment of T. ferrooxidans ATCC 19859 hybridized with a 2.2-kb XhoI fragment from Alcaligenes eutrophus encoding the membrane-bound hydrogenase. Antibodies against this enzyme did not react with the T. ferrooxidans hydrogenase in Western blot analysis. The N-terminal amino acid sequence (40 amino acids) of HoxK was 46% identical to that of the hydrogen sensor HupU of Bradyrhizobium japonicum and 39% identical to that of the HupS subunit of the Desulfovibrio baculatus hydrogenase. The N-terminal sequence of 20 amino acids of HoxG of T. ferrooxidans was 83.3% identical to that of the 60-kDa subunit. HupL, of the hydrogenase of Anabaena sp. Sequences of ten internal peptides of HoxG were 50-100% identical to the respective sequences of HupL of the Anabaena sp. hydrogenase.

Amino Acid Sequence↗

A simplification of the protein assay method of Ramsay et al. for the quantification of Thiobacillus ferrooxidans in the presence of ferric precipitates.

A variation on Ramsay's method for microbial protein determination has been developed in order to quantify Thiobacillus ferrooxidans attached to ferric precipitates or in aqueous suspensions containing such precipitates. Some modifications have been introduced to provide a method that is more sensitive, simple and rapid. A linear standard curve is presented to permit a direct correlation between the protein concentration (mg/l) and the cell concentration (10(6) cells/ml). An application of this method has been demonstrated in the quantification of biomass immobilized on the surface of polyurethane foam particles in a packed bed reactor, several experiments having been conducted to establish the best conditions for the quantification studies.

Bacterial Proteins↗

Immobilisation of Thiobacillus ferrooxidans cells on nickel alloy fibre for ferrous sulfate oxidation.

The immobilisation of the iron-oxidising bacteria Thiobacillus ferrooxidans on nickel alloy fibre as support is described. This matrix showed promise for application in iron oxidation under strongly acidic conditions. The influence on the colonisation process of T. ferrooxidans exerted by the initial pH of the medium and by temperature has also been studied. Results showed that immobilisation of T. ferrooxidans cells was affected by changes of temperature between 30 degrees C and 40 degrees C and in pH from 1.4 to 2.0.

Alloys↗

Enhanced UV sensitivity of Thiobacillus ferrooxidans resulting from caffeine and acriflavine treatment of irradiated cells.

This study was aimed at identifying the roles of caffeine and acriflavine, two repair inhibitors, on UV sensitivity of iron-oxidizing Thiobacillus ferrooxidans ATCC 13728. The UV-dose response survival curve was inflected in nature, suggesting the population heterogeneity of the isolate. Caffeine and acriflavine potentiated the UV-induced killing of the organism. With the increase in concentrations of these compounds, the extent of survival decreased. Similarly, the inhibitory effects of caffeine and acriflavine increased with the increase in dose of UV-irradiation. The cells irradiated with 10 s (equivalent to 5.6 x 10(-5) J/m2/s) of UV-exposure tended to become resistant to the inhibitory effects of caffeine and acriflavine, as evidenced by the time course study of recovery. The cells appear to stage a dramatic recovery from UV damage in the presence of caffeine (3.0 mg/ml) and acriflavine (20 microg/ml) over a period of 25-30 h and 35-40 h respectively, when grown in the presence of energy sources.

Acriflavine↗

Sulfate-dependent iron oxidation by Thiobacillus ferrooxidans: characterization of a new EPR detectable electron transport component on the reducing side of rusticyanin.

Iron(II) oxidation by pH 2.5 HCl-washed cells of Thiobacillus ferrooxidans is known to be sulfate dependent. Sulfate dependence of the autooxidation of a novel component in the electron transport pathway is demonstrated. This component exhibits an electron paramagnetic resonance (EPR) signal in the oxidized state at g = 2.005 distinguishable from the g = 2.08 signal attributed to rusticyanin. The novel component is proposed to be a three-iron-sulfur cluster based upon the g value, lineshape, and temperature dependence. Oxyanion specificity for the EPR signal has the same dependence on sulfate as does iron(II) oxidation. By using azide to inhibit electron transfer to oxygen, sulfate was shown to be involved in electron transfer from the g = 2.005 component to the copper of rusticyanin.

Anions↗

Sulfur-dependent inhibition of protein and RNA synthesis by iron-grown Thiobacillus ferrooxidans.

The addition of sulfur to iron-grown Thiobacillus ferrooxidans resulted in a rapid inhibition in the rates of protein synthesis and RNA synthesis. The inhibition of both functions was measured within 15 to 30 min and was maximal between 70 and 90% compared to the iron-grown controls. DNA synthesis, carbon dioxide fixation, and short-term ferrous oxidation rates of the bacteria growing on ferrous ions were not effected by sulfur addition, indicating that the sulfur addition was not perturbing general cellular energy metabolism. The inhibition caused by sulfur mimicked the effect of the RNA synthesis inhibitor, rifampicin, which inhibited both RNA and protein synthesis, but did not correspond with the translational inhibitor, chloramphenicol, which inhibited only protein synthesis in the first hour. Since chloramphenicol pretreatment did not block the sulfur effect, the inhibition of RNA synthesis following sulfur addition was not mediated through protein synthesis.

Bacterial Proteins↗