Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Quantum Dots”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources

Electron-hole duality and vortex rings in quantum dots.

In a quantum-mechanical system, particle-hole duality implies that instead of studying particles, we can get equivalent information by studying the missing particles, the so-called holes. Using this duality picture for fermions in a rotating trap the vortices appear as holes in the Fermi sea. Here we predict that the formation of vortices in quantum dots at high magnetic fields causes oscillations in the energy spectrum which can be experimentally observed using accurate tunneling spectroscopy. We use the duality picture to show that these oscillations are caused by the localization of vortices in rings.

Journal Article↗

Coherent control of a V-type three-level system in a single quantum dot.

In a semiconductor quantum dot, the IIx and IIy transitions to the polarization eigenstates, |x> and |y>, naturally form a three-level V-type system. Using low-temperature polarized photoluminescence spectroscopy, we have investigated the exciton dynamics arising under strong laser excitation. We also explicitly solved the density matrix equations for comparison with the experimental data. The polarization of the exciting field controls the coupling between the otherwise orthogonal states. In particular, when the system is initialized into \Y>, a polarization-tailored pulse can swap the population into |x>, and vice versa, effectively operating on the exciton spin.

Journal Article↗

Absence of odd-even parity behavior for Kondo resonances in quantum dots.

Zero-bias anomalies in the conductance through quantum dots have recently been identified as Kondo resonances and explained in terms of the Anderson impurity model. The effect requires a degeneracy and it has been proposed that this should occur for odd electron numbers on the dot. In this paper we present data, obtained on a split-gate quantum dot with a small number of electrons, which are in disagreement with this expectation. The mapping of the Anderson model on the quantum dot is discussed in terms of an interacting N electron system demonstrating why this expectation can fail.

Journal Article↗

Polarization-selective plasmon-enhanced silicon quantum-dot luminescence.

The photoluminescence intensity of silicon quantum dots is enhanced in a polarization-selective way by coupling to elongated Ag nanoparticles. The observed polarization dependence provides direct proof that the PL enhancement is due to electromagnetic coupling of the silicon quantum-dot emission dipoles with dipolar plasmon modes of the Ag nanoparticles. The polarization selectivity demonstrates the potential of engineered plasmonic nanostructures to optimize and tune the performance of light sources in a way that goes beyond solely enhancing the emission and absorption rates.

Luminescence↗

Type-II quantum dots: CdTe/CdSe(core/shell) and CdSe/ZnTe(core/shell) heterostructures.

Type-II band engineered quantum dots (CdTe/CdSe(core/shell) and CdSe/ZnTe(core/shell) heterostructures) are described. The optical properties of these type-II quantum dots are studied in parallel with their type-I counterparts. We demonstrate that the spatial distribution of carriers can be controlled within the type-II quantum dots, which makes their properties strongly governed by the band offset of the comprising materials. This allows access to optical transition energies that are not restricted to band gap energies. The type-II quantum dots reported here can emit at lower energies than the band gaps of comprising materials. The type-II emission can be tailored by the shell thickness as well as the core size. The enhanced control over carrier distribution afforded by these type-II materials may prove useful for many applications, such as photovoltaics and photoconduction devices.

Cadmium Compounds↗

Fano versus Kondo resonances in a multilevel "semiopen" quantum dot.

Linear conductance across a large quantum dot via a single level epsilon(0) with large hybridization to the contacts is strongly sensitive to quasibound states localized in the dot and weakly coupled to epsilon(0). The conductance oscillates with the gate voltage due to interference of the Fano type. At low temperature and Coulomb blockade, Kondo correlations damp the oscillations on an extended range of gate voltage values, by freezing the occupancy of the epsilon(0) level itself. As a consequence, the antiresonances of Fano origin are washed out. The results are in good correspondence with experimental data for a large quantum dot in the semiopen regime.

Journal Article↗

Continuous distribution of emission states from single CdSe/ZnS quantum dots.

The photoluminescence dynamics of colloidal CdSe/ZnS/streptavidin quantum dots were studied using time-resolved single-molecule spectroscopy. Statistical tests of the photon-counting data suggested that the simple "on/off" discrete state model is inconsistent with experimental results. Instead, a continuous emission state distribution model was found to be more appropriate. Autocorrelation analysis of lifetime and intensity fluctuations showed a nonlinear correlation between them. These results were consistent with the model that charged quantum dots were also emissive, and that time-dependent charge migration gave rise to the observed photoluminescence dynamics.

Cadmium Compounds↗

The fluorescence bioassay platforms on quantum dots nanoparticles.

In this paper, we present the optical properties and the platforms on fluorescent quantum dots for biological labeling, biomedical engineering and biosensor in molecular imaging. Quantum dots possess several properties that make them very attractive for fluorescent tagging: broad excitation spectrum, narrow emission spectrum, precise tunability of their emission peak, longer fluorescence lifetime than organic fluorophores and negligible photobleaching. We describe how to take such advantages of quantum dots to develop the technology and employ it to build assay platforms. Finally, ultrasensitivity, multicolor, and multiplexing of the technology of semiconductor quantum dots open up promising and interesting possibilities for bioassay platform.

Biotechnology↗

Multispectral imaging of clinically relevant cellular targets in tonsil and lymphoid tissue using semiconductor quantum dots.

Determination of the expression and spatial distribution of molecular epitopes, or antigens, in patient tissue specimens has substantially improved the pathologist's ability to classify disease processes. Certain disease pathophysiologies are marked by characteristic increased or decreased expression of developmentally controlled antigens, defined as Cluster of Differentiation markers, that currently form the foundation for understanding lymphoid malignancies. While chromogens and organic fluorophores have been utilitized for some time in immunohistochemical analyses, developments in synthetic, inorganic fluorophore semiconductors, namely quantum dots, offer a versatile alternative reporter system. Quantum dots are stable fluorophores, are resistant to photobleaching, and are attributed with wide excitation ranges and narrow emission spectra. To date, routinely processed, formalin-fixed tissues have only been probed with two quantum dot reporters simultaneously. In the present study, streptavidin-conjugated quantum dots with distinct emission spectra were tested for their utility in identifying a variety of differentially expressed antigens (surface, cytoplasmic, and nuclear). Slides were analyzed using confocal laser scanning microscopy, which enabled with a single excitation wavelength (488 nm argon laser) the detection of up to seven signals (streptavidin-conjugated quantum dots 525, 565, 585, 605, 655, 705 and 805 nm) plus the detection of 4'6-DiAmidino-2-PhenylIndole with an infra-red laser tuned to 760 nm for two photon excitation. Each of these signals was specific for the intended morphologic immunohistochemical target. In addition, five of the seven streptavidin-conjugated quantum dots tested (not streptavidin-conjugated quantum dots 585 or 805 nm) were used on the same tissue section and could be analyzed simultaneously on routinely processed formalin-fixed, paraffin-embedded sections. Application of this multiplexing method will enable investigators to explore the clinically relevant multidimensional cellular interactions that underlie diseases, simultaneously.

Antigens↗

Shake and break--shaking-induced changes of size quantization in aggregated quantum dots.

We show how simple mechanical agitation of precipitated CdSe quantum dot aggregates causes partially reversible color changes (clearly visible to the eye) in the absorption spectrum of the CdSe (about 4 nm size). The color changes, which are due to changes in size quantization, are not accompanied by change in quantum dot size. This phenomenon is explained by partial deaggregation of the precipitates, leading to reduced charge overlap between neighboring dots. Shaking was shown to result in a looser aggregate structure. It is suggested that CdSO3 particles (an initial product of the CdSe formation reaction) act as weak bridges between CdSe quantum dots, mediating the interparticle interactions and allowing the deaggregation to occur on shaking.

Cadmium Compounds↗

Probing single quantum dots by micro-photoluminescence.

Using micro-photoluminescence, emissions from single CdSe quantum dots were observed from the cleaved (110) facets of ZnSe/CdSe/ZnSe heterostructures grown on GaAs (001) substrates. The emission intensity of a single quantum dot was linearly proportional to the excitation intensity, demonstrating excitonic features. Emissions from these single quantum dots were found to polarize within the (001) plane, providing information on the shapes of the quantum dots.

Cadmium Compounds↗

Coherent photonic coupling of semiconductor quantum dots.

We report a new type of coupling between quantum dot excitons mediated by the strong single-photon field in a high-finesse micropillar cavity. Coherent exciton coupling is observed for two dots with energy differences of the order of the exciton-photon coupling. The coherent coupling mode is characterized by an anticrossing with a particularly large line splitting of 250 microeV. Because of the different dispersion relations with temperature, the simultaneous photonic coupling of quantum dot excitons can be easily distinguished from cases of sequential strong coupling of two quantum dots.

Journal Article↗

Hybrid electrochemical/chemical synthesis of quantum dots.

The "electrochemical/chemical method" (or "E/C method") is a new wet chemical method for synthesizing semiconductor quantum dots on graphite surfaces. The E/C synthesis of quantum dots composed of the generic semiconducting salt, MX, typically involves three steps: (1) electrochemical deposition of nanoparticles of the metal, M degrees, from a solution of metal ions, M(n)(+); (2) electrochemical oxidation of these metal particles to MO(n)()(/2), and; (3) displacement of the oxygen from MO(n)()(/2) using HX (for example) to yield nanoparticles of MX. This conversion from metal to metal oxide to metal salt occurs on a particle-by-particle basis; that is, each metal nanoparticle is converted into a semiconductor nanoparticle. E/C-synthesized beta-CuI and CdS quantum dots possess many of the attributes of quantum dots synthesized using molecular beam epitaxy, including epitaxial orientation on the graphite surface, a narrow size dispersion, and strong, particle size-tunable photoluminescence. However, the E/C method is faster, cheaper, and applicable to a greater number of materials.

Electrochemistry↗

Novel molecular recognition via fluorescent resonance energy transfer using a biotin-PEG/polyamine stabilized CdS quantum dot.

A novel functionally PEGylated quantum dot (QD) was prepared by a coprecipitation method in the presence of the biotin-PEG/polyamine block copolymer. When CdCl2 and Na2S were mixed in aqueous media in the presence of the biotin-PEG-b-poly(2-(N,N-dimethylamino)ethyl methacrylate) [biotin-PEG/PAMA], a CdS QD with a size of ca. 5 nm was prepared. The polyamine segment was anchored on the surface of the formed CdS nanoparticle, whereas the PEG segment was tethered on the surface to form a hydrophilic palisade, thus improving the dispersion stability in aqueous media even under a high salt concentration condition. An effective fluorescent resonance energy transfer (FRET) was observed by the specific interaction of the biotin-PEG/PAMA stabilized CdS QD with TexasRed-labeled streptavidin of the physiological ionic strength of 0.15 M. The extent of the energy transfer was in proportion to the concentration of the TexasRed-streptavidin. This FRET system using the PEGylated CdS QD coupled with fluorescent-labeled protein can be utilized as a highly sensitive bioanalytical system.

Biotin↗

Sensitivity of quantum-dot semiconductor lasers to optical feedback.

The sensitivity of quantum-dot semiconductor lasers to optical feedback is analyzed with a Lang-Kobayashi approach applied to a standard quantum-dot laser model. The carriers are injected into a quantum well and are captured by, or escape from, the quantum dots through either carrier-carrier or phonon-carrier interaction. Because of Pauli blocking, the capture rate into the dots depends on the carrier occupancy level in the dots. Here we show that different carrier capture dynamics lead to a strong modification of the damping of the relaxation oscillations. Regions of increased damping display reduced sensitivity to optical feedback even for a relatively large alpha factor.

Journal Article↗

Coherent properties of a two-level system based on a quantum-dot photodiode.

Present-day information technology is based mainly on incoherent processes in conventional semiconductor devices. To realize concepts for future quantum information technologies, which are based on coherent phenomena, a new type of 'hardware' is required. Semiconductor quantum dots are promising candidates for the basic device units for quantum information processing. One approach is to exploit optical excitations (excitons) in quantum dots. It has already been demonstrated that coherent manipulation between two excitonic energy levels--via so-called Rabi oscillations--can be achieved in single quantum dots by applying electromagnetic fields. Here we make use of this effect by placing an InGaAs quantum dot in a photodiode, which essentially connects it to an electric circuit. We demonstrate that coherent optical excitations in the quantum-dot two-level system can be converted into deterministic photocurrents. For optical excitation with so-called pi-pulses, which completely invert the two-level system, the current is given by I = fe, where f is the repetition frequency of the experiment and e is the elementary charge. We find that this device can function as an optically triggered single-electron turnstile.

Journal Article↗

Coverage-mediated suppression of blinking in solid state quantum dot conjugated organic composite nanostructures.

Size-correlated single-molecule fluorescence measurements on CdSe quantum dots functionalized with oligo(phenylene vinylene) (OPV) ligands exhibit modified fluorescence intermittency (blinking) statistics that are highly sensitive to the degree of ligand coverage on the quantum dot surface. As evidenced by a distinct surface height signature, fully covered CdSe-OPV nanostructures (approximately 25 ligands) show complete suppression of blinking in the solid state on an integration time scale of 1 s. Some access to dark states is observed on finer time scales (100 ms) with average persistence times significantly shorter than those from ZnS-capped CdSe quantum dots. This effect is interpreted as resulting from charge transport from photoexcited OPV into vacant trap sites on the quantum dot surface. These results suggest exciting new applications of composite quantum dot/organic systems in optoelectronic systems.

Cadmium Compounds↗

Peptide-conjugated quantum dots: imaging the angiotensin type 1 receptor in living cells.

Peptide-quantum dot conjugates have been prepared by attaching angiotensin II (Ang II) to cadmium selenide/zinc sulfide core-shell nanocrystals using an 1-[3-(Dimethyamino)propyl]-3-ethylcarbo diimide hydrochloride (EDC) coupling. These conjugates have been used to image angiotensin I-expressing Chinese hamster ovary (CHO) cells in vitro. When CHO cells were incubated with Ang II before incubating with Ang II-conjugated quantum dots, we were able to block the binding of the dots. The Ang II-quantum dot conjugates did not bind to parental cells and showed similar staining patterns when compared with a commercially available Ang II Alexa 488 conjugate.

Angiotensin II↗