Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Polyvinyl Chloride”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources
PubMed2001

Cytogenetic damage in plastic industry workers exposed to polyvinyl chloride.

Cytogenetic investigations on peripheral blood lymphocytes of 40 workers exposed to polyvinyl chloride in the plastic industry were undertaken. These were compared with an equal number of occupationally unexposed and matched controls in relation to age, sex and smoking habits. The mitotic index (MI), chromosomal aberrations (CA), sister chromatid exchanges (SCE) and satellite associations (SA) were analysed. All the parameters showed a significant increase (p <0.01) in the exposed sample compared with the controls, viz MI, 3.64-6.30, CA 1.02-3.77, SCE 3.40-7.83 and SA 5.57-12.05. The occurrence of the DG type of satellite association B was highest and that of 3D type lowest. The frequencies of all the parameters increased with the duration of exposure, but MI declined after 15 years of exposure.

Adolescent↗
PubMed1987

Permeability of latex and polyvinyl chloride gloves to fluorouracil and methotrexate.

The permeability of latex surgical and polyvinyl chloride (PVC) examination gloves to fluorouracil and methotrexate was studied using a radiotracer method. Drug-tracer solutions for both drugs were prepared by combining tritiated fluorouracil or methotrexate with fluorouracil or methotrexate injection, respectively. Drug-free solutions were also prepared to be as similar as possible to the vehicles of the commercial injections. Each half of a total of 40 equilibrium-dialysis cells (20 for each glove type) was filled with either the drug-tracer solution or the drug-free solution. The cell halves were then sealed with glove membranes cut from each type of glove and fastened together so that the drug-tracer and drug-free solutions of each respective drug were opposite one another. Samples were collected after 5 to 45 minutes from each dialysis-cell well and analyzed for drug using liquid scintillation counting techniques. Microgram levels of both drugs were detected in the drug-free dialysis wells for both glove types at each sampling time. Except for the methotrexate drug-labeled well sealed with the PVC glove membrane, the amount of drug in the dialysis wells was significantly different at different sampling times. The variability in results using gloves from different lots was also significantly different for both types of gloves. Overall, latex gloves were significantly less permeable than PVC gloves to fluorouracil, and PVC gloves were significantly less permeable to methotrexate than latex gloves. The latex and PVC gloves used in this study both exhibit time-dependent permeability to fluorouracil and methotrexate.(ABSTRACT TRUNCATED AT 250 WORDS)

Dialysis↗
PubMedDate not supplied

Reported vague symptoms and at-risk status: the case of polyvinyl chloride workers in Louisville.

This study concerns the frequency of visits to the dispensary by workers with vague symptoms of physical illness at a polyvinyl chloride plant in Louisville, KY, where an outbreak of hepatic angiosarcoma occurred. The illness behavior of three cohorts of workers at three levels of risk--workers removed from the chemical plant to a pallet plant (PP) because their screening results indicated liver abnormalities; workers who had some positive test results (TP); and workers whose test results were negative (TN)--was studied before (time 1) and after (time 2) the angiosarcoma crisis. It was predicted that, during time 2, the groups' visits to the dispensary would increase in relation to their levels of risk (PP greater than TP greater than TN). Although there was an overall increase in the percentage of visits because of vague symptoms during time 2, the only cohort with different behavior was the group of TP workers: they reduced their use of the dispensary. These results are similar to those in a previous study in which all symptoms of illness were included. It is speculated that social and individual factors, as well as the labeling phenomenon, explain the results. Health care providers are encouraged to follow up with workers at risk who seem to avoid monitoring their health.

Chemical Industry↗
PubMed1983

[Health status of workers in polyvinyl chloride processing plants. I. Evaluation of occupational exposure. Subjective and capillaroscopy studies. Conduction velocity in the motor nerves].

The examinations covered 255 workers of two polyvinyl chloride processing plants. All workers were subject to general medical examinations including electrocardiography. In a part of workers employed in the plant located in the Katowice Voivodeship, the dermatological tests and neurological examinations including testing the velocity of conduction in motor nerves were carried out and the selected group was subject also to capillaroscopy and dermatothermometry. In the examined workers no "vinyl chloride disease" was found; capillaroscopy and neurological examinations did not reveal any evident changes. However, some dermatoses, most frequently of allergic type, were often encountered.

Air Pollutants, Occupational↗
PubMed1987

Release kinetics of potassium aspartate in polyvinyl chloride matrix formulation.

The authors prepared potassium aspartate matrix tablets in combination with polyvinyl chloride. The physical parameters were measured and the dissolution rates were determined. During the in vitro release rate experiments, it was determined that the dissolution kinetics obey both zero order and Higuchi diffusion model order kinetics.

Aspartic Acid↗
PubMed1988

An 11-year longitudinal study of the occupational dust exposure and lung function of polyvinyl chloride, cement and asbestos cement factory workers.

Standardized questionnaires and lung function tests were administered in 1973, 1980, and 1984 to 126 workers occupationally exposed to polyvinyl chloride (PVC) dust, to cement dust, or to asbestos cement dust until 1974-1978 and to PVC thereafter. The workers in the last group were assigned to two asbestos exposure categories (heavy and slight). The decline in forced vital capacity (FVC) and forced expiratory volume in 1 s (FEV1.0) was analyzed with regard to the length of time since the data of first employment. After adjustment for age, height, and smoking status at the date of first employment, the decline in FVC and FEV1.0 among the nonsmokers-light smokers was slightly accelerated with length of employment in the PVC and slight asbestos exposure groups and markedly accelerated with time since first employment in the heavy asbestos exposure group. The heavy smokers in all the exposure groups had FVC and FEV1.0 predicted values that were lower than those of the nonsmokers-light smokers; these differences remained constant with length of employment. Cessation of asbestos exposure for about 10 years did not seem to change lung function decline.

Adult↗
PubMed1987

Tetramethylsuccinonitrile in polyvinyl chloride products for food and its release into food-simulating solvents.

The content of tetramethylsuccinonitrile (TMSN), the main decomposition product of 2,2'-azobis-isobutyronitrile, in polyvinyl chloride (PVC) products used for food packaging, were examined as well as food-simulating solvents. The TMSN concentration in 17 PVC products ranged from below the detection limit, 0.05 mg/kg, up to 523 mg/kg. The release of TMSN from two PVC products into five kinds of food-simulating solvents at 60 degrees C for 30 min was observed, except for 1 +/- 1 micrograms/kg of TMSN in n-heptane from a PVC bottle containing 523 +/- 30.4 mg/kg of TMSN. The detection limit of TMSN in the food-simulating solvents was 1 micrograms/kg. When pieces of the bottle were stored in olive oil at 40 degrees C for 120 days, 5 +/- 1 micrograms/kg of TMSN was detected in the oil. The release of TMSN from the pieces of the bottle into olive oil between 80 and 140 degrees C depended on the formula ln y = 0.08786x-5.696, r = 0.9927, where y is the concentration (microgram/kg) of TMSN in olive oil, x is the temperature (degrees C), and r is the correlation coefficient.

Food Contamination↗
PubMed1989

The influence of mono(2-ethylhexyl) phthalate and stearates on the migration in soft polyvinyl chloride infusion fluid bags.

The influence of mono(2-ethylhexyl) phthalate (MEHP) and stearates on the migration of di(2-ethylhexyl) phthalate (DEHP) and epoxidized vegetable oils (EVO) in soft polyvinyl chloride infusion fluid bags during agitation has been investigated by gas-liquid chromatography. Normal saline, isotonic glucose and Ringer acetate from 3 different manufacturers were investigated. A covariation was observed between the MEHP concentration in the solution and the pH. The MEHP concentration was not influenced by agitation. There was no correlation between the MEHP concentration in the solution and the migration of EVO and DEHP, or between the stearate concentration and the EVO and DEHP migration.

Chemistry, Pharmaceutical↗
PubMedDate not supplied

Differences in vitamin A content of enteral feeding solutions following exposure to a polyvinyl chloride enteral feeding system.

This research was conducted to determine if there were significant differences in the vitamin A content of two enteral feeding solutions following timed exposure to a polyvinyl chloride (PVC) enteral tube feeding system. This study took place in the laboratory setting with procedures designed to simulate clinical conditions with respect to rate of flow and time of exposure. Feeding solutions (Ensure Osmolite and Vivonex High Nitrogen) were sampled, placed in PVC feeding system pouches (Vivonex Delivery System, Norwich-Eaton Pharmaceuticals, Norwich, NY) and permitted to drip from the pouches at a constant rate. Solution remaining in the pouches was sampled at intervals for a period of six hours, and all samples were analyzed for Vitamin A content using spectrophotometric methods. Statistical analysis of the data indicated no significant difference in Vitamin A content of either feeding solution following six hours of exposure to a PVC enteral tube feeding system.

Enteral Nutrition↗
PubMed1992

Sorption studies of dipotassium clorazepate salt (Tranxène) and midazolam hydrochloride (Hypnovel) in polyvinyl chloride and glass infusion containers.

The compatibilities of dipotassium clorazepate and midazolam hydrochloride with polyvinyl chloride (PVC) bags have been studied and compared with those observed with glass flasks. At room temperature, dipotassium clorazepate showed chemical instability which was independent of the container. At 4 degrees C, dipotassium clorazepate showed no decrease in concentration over 12 h, both in 5% dextrose solution and 0.9% sodium chloride solutions. When stored for longer periods of up to 72 h, a slight decrease not exceeding 5% was observed. The compatibility of midazolam with the PVC bags was found to be good at room temperature. It was slightly better in 5% dextrose solution than in 0.9% sodium chloride solution. High sorption of the drug was observed at pH 7.0 when the primary ring structure is maintained. The results make it possible for the hospital pharmacist to prepare dipotassium chlorazepate salt and midazolam admixtures up to 3 days before administration, provided the former are stocked in a refrigerator and the latter are prepared in dextrose isotonic solutions.

Chemistry, Pharmaceutical↗
PubMed1999

Stability, compatibility and plasticizer extraction of quinine injection added to infusion solutions and stored in polyvinyl chloride (PVC) containers.

The stability of quinine was determined in various diluents and in polyvinyl chloride (PVC) containers. The release of diethyhexyl phthalate (DEHP) from PVC bags into intravenous infusions of quinine was also measured. We used an injection of two doses of quinine; quiniforme at 500 mg and quinimax at 400 mg in either 250- or 500-ml PVC infusion bags containing 5% dextrose, to give initial nominal concentrations of 2 or 1 mg ml(-1) quiniforme and 1.6 or 0.8 mg ml(-1) quinimax, the mean concentrations commonly used in clinical practice. Samples were assayed by stability-indicating high-performance liquid chromatography (HPLC) and the clarity was determined visually. Experiments were conducted to determine whether the stability and compatibility of quinine would be compromised, and whether DEHP would be leached from PVC bags and PVC administration sets during storage and simulated infusion. There was no substantial loss of quiniforme and quinimax over 1- or 2-h simulated infusion irrespective of the diluent, and storage during 8 h at 22 degrees C, 48 or 72 h at 4 degrees C and 96 h at 45 degrees C. Leaching of DEHP was also detected during simulated infusion delivery using PVC bags and PVC administration sets. The quantity was less than 2 microg ml(-1). During storage at 4 degrees C and room temperature the leaching of DEHP was low, but when the temperature was 45 degrees C the quantity was high, 21 microg ml(-1). To minimise patient exposure to DEHP, quinine solutions with all drugs should be infused immediately or stored for a maximum of 48 h at 4 degrees C.

Antimalarials↗
PubMed1983

The effectiveness of polyvinyl chloride plastic bands impregnated with permethrin as a control for the northern fowl mite, Ornithonyssus sylviarum (Canestrini and Fanzago), infesting caged laying chickens.

Caged White Leghorn hens were used to study the effectiveness of polyvinyl chloride (PVC) bands impregnated with 10% permethrin (50 mg/active ingredient/band) for control of the northern fowl mite (NFM), Ornithonyssus sylviarum (Canestrini and Fanzago). The PVC bands were attached two ways, either to the leg of the bird or to the cage floor. Leg band treatments included one, two, three, four, and six birds banded (one band per bird) per cage of six birds. Cage band treatments included one, two, and four PVC strips attached to the cage floor. The attachment of PVC bands to cages was very effective in controlling NFM. Birds in the treatment with four bands attached to the cage floor were essentially mite free for the duration of the 19-week test. Based on this test, the leg banding technique does not seem to be as effective or practical for controlling NFM on caged layers as is attachment of the bands to the cage floor. The use of permethrin-impregnated PVC bands or strips attached to the floor of poultry cages shows promise for effective NFM control and for relieving stress on birds resulting from conventional spraying or dusting treatments.

Animals↗
PubMed1984

Ultrastructural immunocytochemistry of particulate fractions using polyvinyl chloride microculture wells.

A method is described for immunoelectron microscopy of particulate subcellular fractions using polyvinyl chloride (soft) microculture wells as mechanical supports and reaction vessels. Appropriate quantities of particles are centrifuged onto the well bottoms, fixed and permeabilized if necessary, then labeled by standard procedures, fixed in glutaraldehyde and tannic acid, and prepared for thin section electron microscopy. The centrifugation, the fixations, and the embedment in Epon are discussed in detail.

Animals↗
PubMed1985

Sorption of amiodarone to polyvinyl chloride infusion bags and administration sets.

The loss of amiodarone from i.v. admixtures to flexible polyvinyl chloride (PVC) infusion bags and i.v. administration sets was studied. Admixtures containing amiodarone hydrochloride 600 micrograms/mL and either 5% dextrose injection or 0.9% sodium chloride injection were stored at room temperature in glass bottles (both with and without contact of the drug solution with the rubber bottle closure), in flexible PVC bags, or in rigid PVC bottles. After 120 hours, the contents of each flexible PVC bag were emptied and replaced by methanol, which was allowed to remain in the bag for an additional 120 hours and was then analyzed for amiodarone content. To determine availability of amiodarone after infusion through a 1.8-m PVC i.v. administration set, solutions stored in glass containers were run through the set at 0.5 mL/min for 90 minutes. Samples of drug solutions were collected at appropriate intervals and analyzed by a stability-indicating high-performance liquid chromatography (HPLC) assay. Admixtures containing 0.9% sodium chloride injection were not stable; visual incompatibility was evident after 24 hours of storage in glass bottles, and no further testing was performed. In admixtures containing 5% dextrose injection that were stored in 50-mL flexible PVC bags, 60% of the initial amiodarone concentration remained after 120 hours; approximately half of the lost drug was recovered with the methanol. In effluent collected from the PVC administration set, 82% of the initial amiodarone concentration remained. Amiodarone concentrations did not decrease appreciably, after storage in glass or rigid PVC bottles, indicating that drug loss was probably affected by the plasticizer, di-2-ethylhexyl phthalate.(ABSTRACT TRUNCATED AT 250 WORDS)

Adsorption↗
PubMed2000

Investigation of the release behavior of diethylhexyl phthalate from the polyvinyl-chloride tubing for intravenous administration.

The release behavior of diethylhexyl phthalate (DEHP) from a polyvinyl-chloride (PVC) tube, which is part of an intravenous administration set, was investigated with the coexistence of polysorbate 80 (Tween 80) in various solutions such as physiological saline (PS), distilled water for injection (DWI) and glucose solution (TZ). The cumulative amount of DEHP released after 5 h was in the following order; PS, DWI > 50% TZ. From a comparison of the amount of released DEHP and the critical micelle concentration (CMC) of various solutions, the lower the CMC of the solution, the higher the amount of DEHP released from the PVC tubing. When the concentration of Tween 80 was kept constant at 1 mg/ml, the cumulative amount of DEHP released with a flow rate 90 ml/h was higher than that at 60 ml/h. These results suggest that the release of DEHP from the PVC tubing is closely correlated with the interaction of Tween 80 and DEHP such as the formation of micelles, the collision of micelles against the surface of the PVC tubing and the diffusion properties of DEHP and or Tween 80 in the liquid medium.

Diethylhexyl Phthalate↗
PubMed2001

Migration of 4-nonylphenol from polyvinyl chloride food packaging films into food simulants and foods.

Migration of 4-nonylphenol (NP) from polyvinyl chloride (PVC) films for food packaging into food simulants and foods has been studied in domestic applications such as wrapping of food and reheating in a microwave oven. The migration of NP from the PVC films was determined by high-performance liquid chromatography with electrochemical coulometric-array detection (LC/ED). Twelve PVC films intended for commercial use and ten for domestic applications (total: 22 samples) were analysed. Some of the PVC films (two home-use and ten retail-use) contained NP at concentrations of between 500 and 3300 microg/g. Migration of NP from the films was influenced by the test conditions (n-heptane at 25 degrees C for 60 min, distilled water at 60 degrees C for 30 min and 4% acetic acid at 60 degrees C for 30 min). The amount of NP migrating from the PVC films into n-heptane (0.33-1.6 microg/cm2) was higher than the amount migrating into distilled water or 4% acetic acid (up to 9.7 ng/cm2) for the 11 films in which NP was detected. Up to 0.23% of the NP migrated into distilled water and 4% acetic acid and up to 62.5% into n-heptane. In addition, we investigated NP migration into cooked rice samples wrapped in PVC film. Using spiked samples the method gave an average recovery of 83.7% (n = 5) with a standard deviation of 2.5%. Migration of NP ranged from not detectable (< 1.0 ng/g) to 410.0 ng/g by reheating samples in a microwave oven for 1 min and from not detectable to 76.5 ng/g by keeping samples at room temperature for 30 min.

Chromatography, High Pressure Liquid↗