SEARCH · Search PubMed

Results for “Glycolates”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources

PubMed2000

Study of phase behavior of poly(ethylene glycol)-polysorbate 80 and poly(ethylene glycol)-polysorbate 80-water mixtures.

Mixtures of poly(ethylene glycols) (PEGs) with polysorbate 80 are often used to dissolve poorly water-soluble drugs in dosage forms, where polysorbate 80 helps either in enhancing dispersion or in inhibiting precipitation of drugs once the solution is mixed with water. Binary phase diagrams of polysorbate 80 with several low molecular weight PEGs and a ternary phase diagram of polysorbate 80 with PEG 400 and water are presented. Two phases were observed in the binary mixtures when the concentration of PEG 200, PEG 300, PEG 400, or PEG 600 was >55%(w/w). The miscibility of the binary mixtures increases with an increase in temperature; the upper consolute temperatures of PEG 200-polysorbate 80, PEG 300-polysorbate 80, PEG 400-polysorbate 80, and PEG 600-polysorbate 80 mixtures were 100, 85, 75, and 40 degrees C, respectively. The upper consolute temperature of PEG 1000-polysorbate 80 could not be determined because the melting temperature of the mixtures is approximately 40 degrees C and the consolute temperature appeared to be less than this temperature. The decrease in upper consolute temperature with an increase in PEG molecular weight indicated a greater miscibility of the two components. In the ternary system, phase separation of polysorbate 80 was observed when the concentration of PEG 400 was >50-60 % (w/w), possibly because of the high exclusion volume of PEG 400.

Dosage Forms↗

PubMed2004

Poly(ethylene glycol) enhances cell motility on protein-based poly(ethylene glycol)-polycarbonate substrates: a mechanism for cell-guided ligand remodeling.

The regulation of cell motility on ligand-adsorbed poly(ethylene glycol) (PEG)-based polymeric biomaterials is governed by variables that are not well characterized. In this report, we examined keratinocyte migratory responsiveness to PEG-variant tyrosine-derived polycarbonates adsorbed with equivalent levels of the cell adhesion ligand, fibronectin. The equivalently adsorbed ligand adopted differential distributions, confirmed via atomic force microscopy, and the total number of exposed cell-binding domains (CBD), quantified through immunosorbent fluorometry, varied as a function of PEG concentration. Specifically, the CBD exposure was maximized at 4 mol % PEG and diminished at 8 mol % PEG, suggesting, based on our previous work (Tziampazis et al., Biomaterials 2000;21:511-520), that activation of cell adhesion and motility could be potentially promoted through increased CBD exposure at intermediate levels of PEG. This was confirmed through cell migration studies wherein cell speed values increased from 11 to 22 microm/h as the PEG concentration was increased from 0 to 4 mol %. Unexpectedly, however, high cell motility rates were sustained at 8 mol % PEG despite diminished levels of initial CBD exposure beyond 4 mol % PEG, suggesting that factors other than the initial CBD exposure may additionally have a role in activating cell migration at higher levels of PEG. Through studies of direct ligand mobility, cell-ligand-polymer interactions via atomic force microscopy, and CBD variation and integrin receptor roles in ligand remodeling, we offer evidence that cell motility is enhanced by a new mechanism for the regimen of higher PEG concentration: upon cell attachment and spreading, the ligand exhibits greater "slippage" at the polymer interface, and undergoes cell-engendered remodeling, which further activates cell motility, likely through enhanced exposure of hitherto encrypted sites for cell binding and signaling.

Antibodies↗

PubMed1996

A colorimetric assay for estimation of polyethylene glycol and polyethylene glycolated protein using ammonium ferrothiocyanate.

A colorimetric method for quantitative assay of polyethylene glycol (PEG) described here is based on partitioning of a chromophore present in ammonium ferrothiocyanate reagent from an aqueous to a chloroform phase in the presence of PEG. The method is simple, reproducible, and can detect PEG in amounts as low as 5 microg. It gives a linear response over a range of 5-100 microg. The absence of any interference by proteins makes the assay equally suitable for the estimation of PEG in PEG-protein conjugates. The method was employed to monitor the separation profile of a mixture of free and PEG-5000 coupled to bovine serum albumin during purification through a gel filtration column. In this report we have also demonstrated for the first time an assay method which permits a critical evaluation of pharmacokinetic properties of any PEG-protein conjugate under in vivo conditions.

Animals↗

PubMed2001

Vitrification of mouse oocytes in ethylene glycol-raffinose solution: effects of preexposure to ethylene glycol or raffinose on oocyte viability.

We investigated the effects of preexposure to ethylene glycol (EG) or raffinose on the viability of vitrified mouse oocytes. Ovulated oocytes at the metaphase II stage were preexposed either to 2 M EG for 0, 2, or 5 min or to ascending concentrations (0.15 followed by 0.3 M ) of raffinose solution for 2, 5, or 10 min each (here referred to as 2-2, 5-5, and 10-10 min, respectively). The oocytes were then exposed to a vitrification solution (VS), 6 M EG + 0.3 M raffinose, for 0.5, 1, 2, or 5 min and then vitrified or immediately diluted. After warming, the developmental capacity of oocytes was determined after in vitro fertilization. Volume changes in oocytes during preexposures and exposure to the VS were also investigated. The results demonstrated that preexposure to 2 M EG allowed shorter exposure times of oocytes to the VS and that predehydration in raffinose solutions for 5-5, but not 2-2 or 10-10 min, allowed a wider range of exposure times to the VS. Experiments on volume change suggested that the optimum time of exposure to the VS depends on the amount of EG permeation after preexposure to 2 M EG or to raffinose solutions. Preexposures to 2 M EG or raffinose under optimized conditions increased the viability of vitrified-warmed oocytes compared to direct exposure to VS without preexposures.

Animals↗

PubMed1976

Polyethylene glycol-induced mammalian cell hybridization: effect of polyethylene glycol molecular weight and concentration.

The effects of polyethylene glycol (PEG) molecular weight and concentration on mammalian cell hybridization were studied. The peak hybridization-inducing activity with all grades of PEG from 400-6000 was found to occur in the concentration range of 50-55%. However, changes in concentration were seen to have different quantitative effects with different grades of PEG. For monolayer fusions, PEG 1000 at 50% seems to be the optimal combination of PEG molecular weight and concentration, in terms of both efficiency of hybridization and relative insensitivity to dilution effects.

Cell Fusion↗

PubMed1996

Protein partitioning equilibrium between the aqueous poly(ethylene glycol) and salt phases and the solid protein phase in poly(ethylene glycol)-salt two-phase systems.

True partitioning behaviour, which is independent of the protein concentration in aqueous two-phase systems, only occurs at relatively low protein concentration. The actual concentration limit depends on the properties of the protein. When the concentration of a protein exceeds relatively low values, precipitation at the interface can be observed. This protein precipitate is in equilibrium with the protein solubilized in each of the phases. This paper discusses the effect of protein solubility in view of the equilibrium of the protein concentration between the aqueous poly(ethylene glycol) and salt phases and the solid protein phase using three proteins. It was found that only rarely will the proteins be completely in solution as the concentration is increased until a solubility limit is reached and then the protein precipitates fully out of solution. A behaviour that came close to this was only seen in one case out of six. In virtually all cases, a third phase is formed which represents a solid aggregate phase which is in equilibrium with the other two, largely aqueous, phases. As the overall concentration of protein in the system is increased and the concentration in the top and bottom aqueous phases increases, the pseudo concentration in the solid-phase, C's, also increases. This could have interesting implications in terms of the amount of water associated with this phase and it certainly means that in this particular case, the solid phase is not a crystal.

Aspergillus niger↗

PubMed2004

Polyethylene glycol-polyamidoamine dendritic micelle as solubility enhancer and the effect of the length of polyethylene glycol arms on the solubility of pyrene in water.

Unimolecular dendritic micelles designed as solubility enhancers were obtained by coupling polyethylene glycol (PEG) to Starburst polyamidoamine (PAMAM) dendrimers. Micelles-750, -2000, and -5000 have a generation 3.0 dendrimer core (32 primary amine end groups) and PEG arms with molecular weights of 750, 2000, and 5000, respectively. The conjugate of dendrimer core and PEG was characterized by MALDI-TOF MS and 1H NMR. 1H NMR was also used to estimate the average number of PEG arms on each dendrimer molecule. A typical hydrophobic compound, pyrene, was sonicated in an excess amount together with micelles at 50 degrees C for 6 h to produce its saturated water solution. The change of the solubility of pyrene was monitored at 334 nm, its maximum adsorption wavelength, by UV-VIS spectra. Concentrated micelles tended to dissolve more pyrene. However, there is no obvious linear relationship between micelle type and the amount of pyrene entrapped within micelles. Micelle-2000 could solubilize more pyrene than micelle-750. It is hypothesized that micelle-5000 did not solubilize more pyrene than micelle-2000 because of the PEG shell disruption by adjacent interpenetration of individual micelles when PEG arm length increased.

Dendrites↗

PubMed2003

Poly(butyl methacrylate-g-methoxypoly(ethylene glycol)) and poly(methyl methacrylate-g-methoxypoly(ethylene glycol)) graft copolymers: preparation and aqueous solution properties.

A series of water-soluble, amphiphilic graft copolymers has been prepared by free-radical copolymerization of methoxypoly(ethylene glycol) macromonomers, with either methyl methacrylate or butyl methacrylate as the comonomers, in water/ethanol solvent mixtures. Lower molecular weight copolymers were obtained by increasing the concentration of the initiator, azobisisobutyronitrile (AIBN), used in the polymerization reaction. However, the route used also led to the formation of significant quantities of tetramethylsuccinodinitrile, a toxic byproduct resulting from the cage reaction of AIBN. Static fluorescence measurements using pyrene as a probe, along with 1H NMR experiments, showed that the graft copolymers form aggregates in water at very low concentrations (approximately 0.01 g l(-1)) with the pendant hydrophilic graft chains forming a stabilizing shell around the hydrophobic backbone. An increase in the hydrophile-lipophile balance of the graft copolymers was found to lead to smaller aggregates with lower aggregation numbers and highly swollen hydrophilic shells, as revealed by small angle neutron scattering (SANS).

Methacrylates↗

PubMed2002

New formulation of chemical peeling agent: 30% salicylic acid in polyethylene glycol. Absorption and distribution of 14C-salicylic acid in polyethylene glycol applied topically to skin of hairless mice.

Salicylic acid is used in chemical peeling procedures. However, they have caused many side effects, even salicylism. To achieve a salicylic acid peeling that would be safer for topical use, we recently developed a new formulation consisting of 30% salicylic acid in polyethylene glycol (PEG) vehicle. In an extension of our previous research, we studied the absorption of 30% salicylic acid labeled with 14C in PEG vehicle applied topically to the intact and damaged skin of male hairless mice. An ointment containing 3 mg salicylic acid in 10 mg vehicle was applied to both groups. In animals with intact skin, 1 h after application the plasma concentration of radioactivity was 1665.1 ng eq/ml, significantly lower than the 21437.6 ng eq/ml observed in mice with damaged skin. Microautoradiograms of intact skin showed that the level of radioactivity in the cornified cell layer was similar at 6 h after application. However, in damaged skin, the overall level of radioactivity showed a decrease by 3 h after application. In the carcasses remaining after the treated intact and damaged skin had been removed, 0.09 and 11.38% of the applied radioactivity remained, respectively. These findings confirm that 30% salicylic acid in PEG vehicle is little absorbed through the intact skin of hairless mice, and suggest that salicylism related to absorption through the skin of quantities of topically applied salicylic acid is not likely to occur in humans with intact skin during chemical peeling with this preparation. This new preparation of 30% salicylic acid in PEG vehicle is believed to be safe for application as a chemical peeling agent.

Absorption↗

PubMedDate not supplied

Poly(ethylene glycol)-modification of the phospholipid vesicles by using the spontaneous incorporation of poly(ethylene glycol)-lipid into the vesicles.

The critical micelle concentrations of 1, 2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-[monomethoxy poly(ethylene glycol) (5000)] (PEG-DPPE) and its distearoyl analogue (PEG-DSPE) were 70 and 9 microM, respectively, in buffer solutions ([Tris] = 20 mM, [NaCl] = 140 mM, pH 7.4) at 37 degrees C. When these PEG-lipid micelle dispersions were mixed with the dispersions of phospholipid vesicles comprised of a C16 membrane, of which the carbon number is 16, or a C18 membrane, the PEG-lipid micelles were dissociated into monomers and then spontaneously incorporated into the surface of the preformed vesicles. The incorporation rates and the enthalpy changes during incorporation were measured with an isothermal titration microcalorimeter. The incorporation rate of PEG-DPPE was faster than that of PEG-DSPE, because the dissociation rate of the PEG-DPPE micelles was faster than that of PEG-DSPE micelles. The incorporation equilibrium constant of PEG-DSPE was larger than that of PEG-DPPE due to its slow dissociation rate from the membrane, caused by the stronger hydrophobic interaction. The combination of PEG-DSPE and the C18 membrane was the most thermodynamically stabilized pair. Furthermore, the dispersion stability of the surface-modified vesicles prepared by this spontaneous incorporation was analyzed by using the critical molecular weight of the polymer for the aggregation of vesicles. The aggregation of the vesicles was successfully supressed with an increase in the molecular weight of the PEG in the PEG-lipid and its incorporation ratio.

Chemical Phenomena↗

PubMed1998

An investigation of FB interactions with poly(ethylene glycol) 6000, poly(ethylene glycol) 4000, and poly-epsilon-caprolactone by thermoanalytical and spectroscopic methods and modeling.

The interactions between flurbiprofen (FB) and different polymers are studied in order to improve the bioavailability of FB. FB-polymer phase diagrams [poly(ethylene glycol) (PEG) 4000, PEG 6000, and poly-epsilon-caprolactone] were constructed and compared with the modeling diagrams. Thermoanalytical methods (differential scanning calorimetry, thermomicroscopy) were used to construct the phase diagrams. Thermodynamic data were used to model the FB-polymer systems. The construction of the FB-polymer phase diagrams showed the existence of a stable invariant called "eutectic" characterized by (XE)exp, (TfE)exp, and (DeltaHfE)exp, the experimental eutectic composition, the experimental temperature, and the enthalpy of eutectic melting, respectively. Modeling confirmed the values for these parameters and was used to evaluate the different Flory-Huggins parameters chi for each FB-polymer mixture. chi values and the infrared spectra confirm that the interactions due to hydrogen bonds between FB and PEG 4000 are more numerous than between FB and PEG 6000 and also more numerous than between FB and poly-epsilon-caprolactone.

Anti-Inflammatory Agents, Non-Steroidal↗

PubMed1988

Gastrointestinal permeability to polyethylene glycol: an evaluation of urinary recovery of an oral load of polyethylene glycol as a parameter of intestinal permeability in man.

The permeability of the gastrointestinal tract was investigated by means of polyethylene glycol (PEG), given orally. The PEG solutions contained oligomers with molecular weights from 414 to 1206. The urinary recovery of ingested PEG was determined by high performance liquid chromatography (HPLC). Considerable inter- and intra-individual variations in recovery were found in a reference group of 33 healthy subjects. Intake of food did not change the recovery of PEG, 6.11% (SEM 0.52, n = 13) compared with that for the reference group, 6.45% (SEM 0.39, n = 33). The PEG recovery in a group of ileostomy patients was 5.86% (SEM 0.62, n = 13). No correlation was found between PEG recovery and small bowel transit time. The lipophillic properties of PEG were determined by measuring the partition coefficients in 1-octanol/water and in methylhexanoate/water systems. From these results, correlated with the values for the hydrodynamic volumes of PEG, it was concluded that the intestinal permeation of PEG observed was probably determined by the hydrophillic/hydrophobic properties of the mucosal membrane, rather than by the presence of intercellular junctions or paracellular pores. The PEG molecules with molecular weights from 414 to 1206 were, therefore, not suitable as solitary probes for permeability studies in man.

Administration, Oral↗

PubMed1988

The 24-hour posttransfusion survival and lifespan of autologous baboon red cells treated with inositol hexaphosphate-polyethylene glycol or inositol hexaphosphate-adenosine triphosphate-polyethylene glycol to decrease oxygen affinity.

Baboon red cells were treated to reduce oxygen affinity by an osmotic-pulse procedure using dimethyl-sulfoxide. Inositol hexaphosphate (IHP) alone or IHP and adenosine triphosphate (ATP) were incorporated into the red cells in the presence of polyethylene glycol (PEG). The procedure produced variable increases in the red cell P50 value, i.e., the partial pressure of oxygen at which 50% of the hemoglobin was saturated. The effect of treatment of autologous baboon red cells on the 24-hour posttransfusion survival value and lifespan T50 value was measured using a double-label procedure. The data demonstrate that the increase in the P50 value of treated red cells was negatively correlated with the 24-hour posttransfusion survival value; the higher the P50 value, the poorer the 24-hour posttransfusion survival value. The 24-hour posttransfusion survival value for nontreated baboon red cells was 90% and the T50 value was 14 days. The IHP-ATP-PEG-treated red cells had significantly higher red cell ATP levels than did IHP-PEG-treated red cells. The 24-hour posttransfusion survival value was 68% for the IHP-ATP-PEG treated red cells and 52% for the IHP-PEG-treated red cells when the increase in P50 ranged from 10 to 20 mm Hg; the lifespan T50 value for both the IHP-ATP-PEG-treated red cells and the IHP-PEG-treated red cells was 15 days. Osmotic pulse treatment produced significant red cell injury manifested by the 24-hour posttransfusion survival value. However, modification of the RBC with IHP-PEG or IHP-ATP-PEG to decrease hemoglobin affinity for oxygen did not affect their lifespan.

Adenosine Triphosphate↗

PubMed1986

Preparation and evaluation of hemoglobin-polyethylene glycol conjugate (pyridoxalated polyethylene glycol hemoglobin) as an oxygen-carrying resuscitation fluid.

Human hemoglobin was pyridoxalated and subsequently coupled with the activated ester of polyethylene glycol (PEG) to provide an oxygen-carrying resuscitation fluid. The PEG conjugate of pyridoxalated hemoglobin (pyridoxalated PEG hemoglobin) has a longer half-life in the circulation (12.8 h) than does hemoglobin (2.2 h) when the solutions are exchange-transfused by approximately 60%. The P50 of pyridoxalated PEG hemoglobin, which is the partial pressure of oxygen at which one-half of the absorbed oxygen is released, was 21.3 +/- 1.4 mm Hg (mean +/- SD, n = 5) (37 degrees C, pH = 7.4), which is close to that of human whole blood (25.9 +/- 0.6 mm Hg). The colloidal osmotic pressure and the viscosity were 36.5 +/- 2.4 mm Hg (n = 5) and 2.6 +/- 0.4 cp (n = 5), respectively. The results indicate that the pyridoxalated PEG hemoglobin solution has favorable properties for use as an oxygen-carrying resuscitation fluid.

Animals↗

PubMed2005

Using physiologically-based pharmacokinetic modeling to address nonlinear kinetics and changes in rodent physiology and metabolism due to aging and adaptation in deriving reference values for propylene glycol methyl ether and propylene glycol methyl ether acetate.

Reference values, including an oral reference dose (RfD) and an inhalation reference concentration (RfC), were derived for propylene glycol methyl ether (PGME), and an oral RfD was derived for its acetate (PGMEA). These values were based on transient sedation observed in F344 rats and B6C3F1 mice during a two-year inhalation study. The dose-response relationship for sedation was characterized using internal dose measures as predicted by a physiologically-based pharmacokinetic (PBPK) model for PGME and its acetate. PBPK modeling was used to account for changes in rodent physiology and metabolism due to aging and adaptation, based on data collected during Weeks 1, 2, 26, 52, and 78 of a chronic inhalation study. The peak concentration of PGME in richly perfused tissues (i.e., brain) was selected as the most appropriate internal dose measure based on a consideration of the mode of action for sedation and similarities in tissue partitioning between brain and other richly perfused tissues. Internal doses (peak tissue concentrations of PGME) were designated as either no-observed-adverse-effect levels (NOAELs) or lowest-observed-adverse-effect levels (LOAELs) based on the presence or the absence of sedation at each time point, species, and sex in the two-year study. Distributions of the NOAEL and LOAEL values expressed in terms of internal dose were characterized using an arithmetic mean and standard deviation, with the mean internal NOAEL serving as the basis for the reference values, which was then divided by appropriate uncertainty factors. Where data were permitting, chemical-specific adjustment factors were derived to replace default uncertainty factor values of 10. Nonlinear kinetics, which was predicted by the model in all species at PGME concentrations exceeding 100 ppm, complicate interspecies, and low-dose extrapolations. To address this complication, reference values were derived using two approaches that differ with respect to the order in which these extrapolations were performed: (1) default approach of interspecies extrapolation to determine the human equivalent concentration (PBPK modeling) followed by uncertainty factor application, and (2) uncertainty factor application followed by interspecies extrapolation (PBPK modeling). The resulting reference values for these two approaches are substantially different, with values from the latter approach being seven-fold higher than those from the former approach. Such a striking difference between the two approaches reveals an underlying issue that has received little attention in the literature regarding the application of uncertainty factors and interspecies extrapolations to compounds where saturable kinetics occur in the range of the NOAEL. Until such discussions have taken place, reference values based on the former approach are recommended for risk assessments involving human exposures to PGME and PGMEA.

Administration, Inhalation↗

PubMed2006

Polyethylene glycol and a novel developed polyethylene glycol-nitric oxide normalize arteriolar response and oxidative stress in ischemia-reperfusion.

Polyethylene glycol (PEG) has been shown to repair cell membranes and, thus, inhibit free radical production in in vitro and in vivo models. We hypothesized that PEG and newly developed organic nitrate forms of PEG (PEG-NO) could repair endothelial dysfunction in ischemia-reperfusion (I/R) injury in the hamster cheek pouch visualized by intravital fluorescent microscopy. After treatments, we evaluated diameter and RBC velocity and flow in arterioles, as well as lipid peroxides in the systemic blood, perfused capillary length, vascular permeability, leukocyte adhesion, and amount of von Willebrand factor (vWF) in the blood after I/R injury. A control group was treated with 5,000- or 10,000-Da PEG, and three groups were treated with PG1 (1 NO molecule covalently bound to PEG, 5,170 Da), PG8 (8 NO molecules covalently bound to PEG, 11,860 Da), and PG16 (16 NO molecules covalently bound to PEG, 14,060 Da). All animals received 0.5 mg/0.5 ml. Lipid peroxides increased at 5 and 15 min of reperfusion, whereas diameter, RBC velocity, and blood flow decreased in arterioles after I/R injury. Vascular permeability, leukocyte adhesion, and vWF increased significantly. PEG and PG1 attenuated lipid peroxides and vasoconstriction during reperfusion and decreased leukocyte adhesion and vascular permeability. PG8 maintained lipid peroxides at normal levels, increased arteriolar diameter, flow, and perfused capillary length, and decreased vWF level and leukocyte adhesion (P < 0.05). PG16 was less effective than PG1 and PG8. In conclusion, PEG-NO shows promise as a compound that protects microvascular perfusion by normalizing the balance between NO level and excessive production of free radicals in endothelial cells during I/R injury.

Animals↗

PubMed2006

Combined low volume polyethylene glycol solution plus stimulant laxatives versus standard volume polyethylene glycol solution: a prospective, randomized study of colon cleansing before colonoscopy.

INTRODUCTION: The effectiveness of polyethylene glycol solutions (PEG) for colon cleansing is often limited by the inability of patients to drink adequate portions of the 4 L solution. The aim of the present study was to determine whether a reduced volume of PEG combined with stimulant laxatives would be better tolerated and as or more effective than the standard dose. METHODS: Patients undergoing outpatient colonoscopy were randomly assigned to receive either low-volume PEG plus sennosides (120 mg oral sennosides syrup followed by 2 L PEG) or the standard volume preparation (4 L PEG). The subjects rated the tolerability of the preparations and their symptoms. Colonoscopists were blind to the colonic cleansing preparation and graded the cleansing efficacy using a validated tool (the Ottawa scale). RESULTS: The low-volume PEG plus sennosides preparation was significantly better tolerated than the standard large volume PEG (P<0.001) but was less efficacious (P=0.03). Thirty-eight per cent of patients in the large volume PEG group were unable to finish the preparation, compared with only 6% in the reduced volume group. There were no adverse events reported. CONCLUSIONS: Although the low-volume PEG plus sennosides preparation was better tolerated, it was not as effective as standard large-volume PEG. However, in view of the significant difference in tolerance, further research investigating possible improvements in the reduced-volume regimen seems warranted.

Anthraquinones↗

PubMed2002

Growth of various cell types in the presence of lactic and glycolic acids: the adverse effect of glycolic acid released from PLAGA copolymer on keratinocyte proliferation.

Poly(alpha-hydroxy-acid)s derived from lactic acid (LA) and glycolic acid (GA) are bioresorbable polymers that are currently used in human surgery and in pharmacology to make temporary therapeutic devices. Nowadays, increasing attention is paid to these polymers in the field of tissue engineering. However, the literature shows that a large number of factors can affect many of their properties and the responses of biological systems. As part of our investigation of the biocompatibility of degradable aliphatic polyesters, the effects of LA and GA on the proliferation of various cells under in vitro cell culture conditions were studied. The release of LA and GA from films made of a copolymer synthesized by the zinc lactate method and composed of 37.5% L-lactyl, 37.5% D-lactyl, and 25% glycolyl repeating units was first investigated over a period of 30 days under abiotic conditions in a cell culture medium in order to identify a range of acid concentrations consistent with releases to be expected in real cell cultures. Four cell lines, namely 3T3-J2, C3H10(1/2), A431, and HaCat, and three primary cell cultures, namely rat endothelial cells, rat smooth muscle cells, and human dermal fibroblasts, were then allowed to grow in the presence of LA and GA at various concentrations taken within the selected 10-1000 mg/cm3 range. Little or no effect was observed on the proliferation of all cells except human keratinocytes, whose growth was dramatically inhibited by GA at concentrations as low as 10 mg/cm3. The inhibiting effect of GA was confirmed by considering the growth of keratinocytes on films made of the same copolymer, in comparison with poly(DL-lactic acid) and polystyrene taken as references. This work shows that GA-releasing degradable matrices are not adapted to the culture of keratinocytes with the aim of making skin grafts.

Animals↗