Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “GOLD”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources
PubMed2006

Fabrication of gold micro- and nanostructures by photolithographic exposure of thiol-stabilized gold nanoparticles.

Exposure of thiol-stabilized gold nanoparticles supported on silicon wafers to UV light leads to oxidation of the thiol molecules and coagulation of the nanoparticles, forming densified structures that are resistant to removal by solvent exposure. Unoxidized particles may, in contrast, readily be removed leaving gold structures behind at the surface. This process provides a convenient and simple route for the fabrication of gold structures with dimensions ranging from micrometers to nanometers. The use of masks enables micrometer-scale structures to be fabricated rapidly. Exposure of nanoparticles to light from a near-field scanning optical microscope (NSOM) leads to the formation of gold nanowires. The dimensions of these nanowires depend on the method of preparation of the film: for spin-cast films, a width of 200 nm was achieved. However, this was reduced significantly, to 60 nm, for Langmuir-Schaeffer films.

Journal Article↗
PubMed2002

Separation of polythionates and the gold thiosulfate complex in gold thiosulfate leach solutions by ion-interaction chromatography.

A method for the separation of the polythionates (SxO6(2-), x = 3-5) in gold thiosulfate leach solutions using ion-interaction chromatography with conductivity and ultraviolet (UV) detection is described. Polythionates were eluted within 18 min using an eluent comprising an acetonitrile step gradient at 0.0 min from 15% v/v to 28% v/v, 3 mM TBAOH, and 2.5 mM sodium carbonate, operated using a Dionex NS1-5 micron column with guard. The developed method was capable of separating the gold thiosulfate complex ion in standard solutions, but quantification of this species in realistic leach solutions proved impractical due to a self-elution effect that caused the gold peak to be eluted as a broad band. Detection limits for polythionates using a 10 microL injection volume ranged between 1-6 mg L(-1) (5-23 microM) for conductivity and 0.8-13 mg L(-1) (4-68 microM) for UV detection, based on a signal-to-noise ratio of 2. Calibration was linear over the ranges 5-2000, 10-2000 and 25-2500 mg L(-1) for trithionate, tetrathionate and pentathionate, respectively. The technique was applied successfully to leach liquors containing 0.5 M ammonium thiosulfate, 2 M ammonia, 0.05 M copper sulfate and 20 % m/v gold ore.

Journal Article↗
PubMed1985

Lack of correlation between blood gold concentrations and clinical response in patients with definite or classic rheumatoid arthritis receiving auranofin or gold sodium thiomalate.

We investigated the correlation between whole blood gold concentrations and clinical outcomes in 59 auranofin-treated patients and 51 gold sodium thiomalate-treated patients who completed a 21-week, placebo-controlled, multicenter parallel trial. Whole blood gold concentrations did not correlate with clinical outcome, as assessed by changes in joint tenderness, joint swelling, or Westergren erythrocyte sedimentation rate. They also did not correlate with toxic reactions necessitating withdrawal from the study.

Adolescent↗
PubMed2006

Gold(I) and silver(I) mixed-metal trinuclear complexes: dimeric products from the reaction of gold(I) carbeniates or benzylimidazolates with silver(I) 3,5-diphenylpyrazolate.

Trinuclear mixed-metal gold-silver compounds are obtained by the reaction of gold(I) carbeniate [Au(mu-C(OEt)=NC6H4-p-CH3)]3, TR(carb), or gold(I) imidazolate [Au-mu-C,N-1-benzyl-2-imidazolate]3, TR(bzim), with silver(I) pyrazolate [Ag(mu-3,5-Ph2pz)]3. The crystalline products are mixed-ligand, mixed-metal dimeric products [Au(carb)Ag2(mu-3,5-Ph2pz)2], [Au2(carb)2Ag(mu-3,5-Ph2pz)].CH2Cl2, [Au(bzim)2Ag2(mu-3,5-Ph2pz)], and [Au2(bzim)2Ag(mu-3,5-Ph2pz)]. They have been characterized by elemental analysis and 1H NMR and mass spectrometry. The X-ray structure of [Au(carb)Ag2(mu-3,5-Ph2pz)2] shows it to be a dimer with two Ag...Au contacts between the trinuclear units of 3.083(2) and 3.310(2) A and with average intramolecular Ag...Ag and Au...Ag distances of approximately 3.3 and 3.2 A, respectively. The structure of [Au2(carb)2Ag(mu-3,5-Ph2pz)].CH2Cl2 is a dimer with one intermolecular Au...Au attraction of 3.3354(10) A and a short Ag...Au distance of approximately 3.42 A and intramolecular Ag...Au and Au...Au contacts of approximately 3.2 and approximately 3.3 A, respectively. Packing diagrams of both complexes show that the dimeric units are independent, similar to their parent molecules. The dimers of trinuclear [Au(carb)Ag2(mu-3,5-Ph2pz)2] and [Au2(carb)2Ag(mu-3,5-Ph2pz)].CH2Cl2 crystallize in the triclinic space group P (Z = 2), a = 9.688(3) A, b = 15.542(4) A, c = 23.689(6) A, alpha = 82.560(5) degrees , beta = 87.887(6) degrees , gamma = 78.060(5) degrees , and the orthorhombic space group Pca2(1) (Z = 4), a = 29.644(4) A, b = 7.4582(10) A, c = 30.473(4) A, respectively. The structure of [Au(bzim)Ag2(mu-3,5-Ph2pz)2] is a dimer with two metallophilic Ag...Au interactions of 3.14 A. The complex crystallizes in the monoclinic space group C2/c (Z = 4), a = 26.368(5) A, b = 15.672(3) A, c = 17.010(3) A, beta = 102.206(3) degrees .

Crystallography, X-Ray↗
PubMed1980

The dental application of electroformed pure gold. II. A. Porcelain inlay. B. Cast copings with adaptable electroformed gold margins.

A technique for electroforming pure gold margins on the abutment castings of bridge substructures made from gold alloys or base metals alloys has been described. The margin of gold can be burnished to compensate for errors inherent in the production of these castings and ceramic procedures. A modification of this procedure permits marginal adjustment to completed crowns and bridges with deficient margins.

Crowns↗
PubMed1988

Contact allergy to gold after systemic administration of gold for rheumatoid arthritis.

A patient with seropositive, nodular rheumatoid arthritis (RA) developed contact allergy to gold jewellery following a severe skin rash which occurred after 13 weeks of treatment with sodium aurothiomalate. Patch testing confirmed that the contact allergy was due to gold. This is the first proved case of contact allergy to gold or any other compound initiated by systemic administration of the allergen.

Arthritis, Rheumatoid↗
PubMed1985

Antidotes for gold (sodium bis[thiosulfato]gold[I]) intoxication in mice.

Eight compounds were examined to determine their relative efficacy as antidotes in acute gold intoxication in mice after the intraperitoneal injection of 200 mg/kg of Na3 [Au(S2O3)2] X 2H2O. Of the compounds examined, 2,3 dimercaptosuccinic acid was the most effective antidote. It was noted that with D-penicillamine those animals which did not survive died sooner (in a matter of hours) than the corresponding control animals which had received no antidote (about 3 days). In subsequent experiments in which Na3 [Au(S2O3)2] X 2H2O was administered at the lower level of 140 mg/kg, 2,3 dimercaptosuccinic acid showed itself to be capable of reducing kidney gold levels by a factor of about 5 and liver gold levels by a factor of approximately 2.

Animals↗
PubMed1996

Clinical reactions to systemic provocation with gold sodium thiomalate in patients with contact allergy to gold.

In a double blind experimental study, 20 patients with a contact allergy to gold sodium thiosulphate were challenged intramuscularly with the chemically similar gold sodium thiomalate and with placebo. The most spectacular clinical reaction in the 10 patients given the active agent, was an epidermal and dermal flare up of healed patch-test reactions to the gold salts, as well as a high, but transient, rise in body temperature. Previous intradermal tests were similarly reactivated. In addition, toxicoderma-like rashes were observed in several cases, but a flare up of a previous contact dermatitis site was seen in one patient only. The specificity of the positive provocations was demonstrated.

Adult↗
PubMed1993

Cationic gold staining of glomerular anionic sites in archived tissue, reprocessed from paraffin wax into LR gold resin.

Glomerular capillary wall anionic sites have been demonstrated by cationic gold staining of archived renal biopsy tissue (up to 10 years old), obtained from six patients, originally embedded in paraffin wax, and subsequently reprocessed into LR gold resin. The staining patterns at pH 2.5 and pH 7.0, demonstrating different glomerular basement membrane (GBM) anionic constituents, were compared in three patients from whom tissue directly processed into LR gold and reprocessed tissue was available. Ultrastructural preservation was poorer and shrinkage artefact greater in paraformaldehyde-lysine periodate (PLP) as opposed to formol saline-fixed reprocessed tissue. However, GBM anionic site expression was well preserved, or even enhanced (lamina rara externa, pH 7.0) in reprocessed tissue, using either fixative. Although it may not be possible to compare subtle changes in anionic site distribution in variously fixed and processed tissues, due to these artefacts, the technique enables retrospective study of charge status in archived material from disease groups in which there are distinct anionic site aberrations.

Acrylic Resins↗
PubMed1981

Antibody coated gold particles containing radioactive gold in the demonstration of cell surface molecules.

Gold particles of varying size which contain either 195Au of 198Au were prepared using white phosphorus or sodium citrate as the reducing agent. After coating with specific antibody to blood group A antigen or human IgG, these particles were used to determine the number of particles binding to the surface of A1 RBC's or rat RBC's to which human IgG had been attached. The number of particles binding to the surface of cells correlated with the number of antibody coated gold particles in the fluid bathing the cells as well as the number of antigen molecules on the cell surface. That is, the number of particles binding increased as the particle density of the suspension increased and as the cell surface antigen density increased. Under the conditions of the experiments, both blood group A antigen and human IgG appeared to be randomly distributed over the surface of the cells in TEM and SEM preparations. This approach permitted the quantitation of the number of gold particles bound per cell and at the same time, the examination of the distribution of the particles over the surface of the same cell population by TEM and SEM.

Animals↗
PubMed1988

Labelling of colloidal gold with IgE. A quantitative study using monoclonal IgE anti-beta-lactoglobulin and evaluation of the biological activity of the gold complex with RBL-1 cells.

Immunocytochemical markers prepared by labelling colloidal gold with antibodies are gaining wide acceptance both in transmission and scanning electron microscopy. However, detailed information on the process and extent of adsorption of IgG and IgE in particular are still lacking. The adsorption isotherm of mouse monoclonal 125I-IgE antibovine milk beta-lactoglobulin was studied quantitatively with colloidal gold buffered at pH 6.1-8.8 (28 nm in particle diameter). At low coverage of the particles (less that or equal to 5 molecules per particle), the isotherm was independent of pH. In the presence of a large excess of IgE, the highest coverage was obtained at pH 6.1 near the pI of IgE (5.2-5.8). The binding constants were higher at low coverage (side-on adsorption) than at high coverage where desorption was observed. IgE-Au markers were unreactive towards the immobilized antigen and did not bind to receptors for IgE of rat basophilic leukemia cells (RBL-1). The reactivity of immobilized anti-IgE antibodies with IgE-Au markers increased as a function of particle coverage. Mapping of RBL-1 cell membrane IgE receptors was achieved by incubating successively IgE-sensitized RBL-1 cells with anti-IgE antibodies and a protein A-gold marker at 4 degrees C. Surface clusters developed when the cells were incubated at 37 degrees C.

Animals↗
PubMed1995

Phagocytes render chemicals immunogenic: oxidation of gold(I) to the T cell-sensitizing gold(III) metabolite generated by mononuclear phagocytes.

The oxidizing capacity of phagocytic cells is suspected to play a major role in the generation of immunogenic drug metabolites, in particular those that cause extrahepatic immunopathological lesions. In the case of the antirheumatic drug gold(I) disodium thiomalate (Na2Au(I)TM), oxidation of the Au(I) ion to Au(III) appears to be responsible for the adverse immune reactions which may develop during gold therapy. Here, we show that the reactive metabolite Au(III) may be generated by mononuclear phagocytes (M phi) exposed to Au(I). The generation of Au(III) was analyzed by means of the adoptive transfer popliteal lymph node assay (PLNA) in mice, using T lymphocytes previously sensitized to Au(III) as a detection probe. Donors of the Au(III)-primed T cells were either directly sensitized to Au(III) by injection of tetrachloroauric acid (HAu(III)Cl4), or indirectly via chronic treatment with Na2Au(I)TM. As donors of peritoneal cells (PC), we used mice which had received weekly i.m. injections of Na2Au(I)TM for 12 weeks and contained increased numbers of activated B cells. The PC of these mice were found to elicit a significant secondary response when used as antigenic material for the restimulation of Au(III)-primed T cells. The immunogenicity of PC obtained from Na2Au(I)TM-treated mice paralleled the total gold content of these cells. Noteworthily, M phi exposed to Au(I) in vitro also proved capable of eliciting a specific secondary response of Au(III)-primed T cells. Hence, M phi exposed to Au(I) generate the reactive intermediate Au(III) which, apparently via oxidation of self proteins, sensitizes T cells. As M phi are constituents of many different organs and, moreover, communicate with T cells, their capacity to generate Au(III) may account for the various extrahepatic adverse immune reactions induced by Au(I) drugs.

Animals↗
PubMed2007

Thermodynamic and kinetic analysis of the interaction between hepatitis B surface antibody and antigen on a gold electrode modified with cysteamine and colloidal gold via electrochemistry.

Hepatitis B surface antibody (HBsAb) was immobilized to the surface of a gold electrode modified with cysteamine and colloidal gold as matrices to detect hepatitis B surface antigen (HBsAg). Differential pulse voltammetry (DPV) method was used for the investigation of the specific interaction between the immobilized HBsAb and HBsAg in solution, which was followed as a change of peak current in DPV with time. With the modified gold electrode, the differences in affinity of HBsAb with HBsAg at the temperatures of 37 and 40 degrees C were easily distinguished and the kinetic rate constants (k(ass) and k(diss)) and kinetic affinity constant K were determined from the curves of current versus time. In addition, the thermodynamic constants, DeltaG, DeltaH and DeltaS, of the interaction at 37 degrees C were calculated, which were -56.65, -64.54 and -25.45 kJ mol(-1), respectively.

Antigen-Antibody Reactions↗
PubMed2003

Measurement of cytoplasmic copper, silver, and gold with a lux biosensor shows copper and silver, but not gold, efflux by the CopA ATPase of Escherichia coli.

Copper, silver, gold and other heavy metals are potentially toxic to cells. Copper is also essential and cellular levels must be carefully controlled. In contrast, there is no known biological role for silver or gold and they have not been recognized as metals that are under homeostatic control. Using a luminescent biosensor based of the Vibrio fischeri lux gene cluster under the control of the Escherichia coli copA promoter/CueR metal-responsive regulator, we could show that in E. coli, cytoplasmic copper and silver, but not gold, are regulated by the CopA ATPase, the major copper efflux pump.

Adenosine Triphosphatases↗
PubMedDate not supplied

Study of the attachment of Pseudomonas aeruginosa on gold and modified gold surfaces using surface plasmon resonance.

This paper describes how the technique of surface plasmon resonance (SPR) can be utilized to follow (in real time) the attachment of Pseudomonas aeruginosa bacteria on bare gold and gold modified with a self-assembled monolayer (SAM) of mercaptounadecanoic acid. We show that SPR is able to discriminate between the adsorption of live versus dead (thermally shocked) bacteria. Moreover, the SPR distinguishes between the adsorption of wild-type versus mutant bacteria (single gene knockouts), the concentration of the bacterial suspension, and between bacteria adsorbing on SAM-modified and bare gold. SPR is able to measure bacterial adsorption within seconds of the bacterial suspension being introduced. Finally, a qualitative correlation between results from SPR with a crystal violet staining assay for different mutant bacteria was observed.

Bacterial Adhesion↗
PubMed2004

Hybridization of oligonucleotide-modified silver and gold nanoparticles in aqueous dispersions and on gold films.

Functionalization of silver and gold nanoparticles by 12mer-thiolated homo-oligonucleotides, SA and ST (containing only adenine or thymine, respectively), and their hybridization and dehybridization in aqueous dispersions have been described. In addition, ST and SA were self-assembled onto gold films and hybridized with their complementary pairs, unlabeled or labeled by gold and silver nanoparticles. The base pairing between DNA strands and the types of oligonucleotides (adenine or thymine) attached to the nanoparticles was detected by Polarization Modulated Fourier Transform Infrared Reflection Absorption Spectroscopy (PM-FTIRRAS).

Adenine↗
PubMed2005

First principles computational study for understanding the interactions between ssdna and gold nanoparticles: adsorption of methylamine on gold nanoparticulate surfaces.

We conducted a computational adsorption study of methylamine on various surface models of a gold nanoparticle which is facetted by multiple [111] and [100] planes. In addition to these flat surfaces, our models include the stepped surfaces (ridges) formed along the intersections of these planes. Binding on the flat surfaces was fairly weak, but substantially stronger on the ridges by an average of 4.4 kcal/mol. This finding supports the idea that ssDNA's interaction with gold nanoparticles occurs through the amines on the purine/pyrimidine rings. Also, this typically undesirable interaction between DNA and gold nanoparticles is expected to increase as the particle size decreases. Our analysis suggests that particle size is an important controlling parameter to reduce this interaction.

Adsorption↗