Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Alkenes”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8Linked to original sources
PubMed1985

4-Hydroxy-alkenals interaction with purified microtubular protein.

4-Hydroxy-alkenals effect on microtubular system has been investigated, comparing the activity of both biogenic and non-biogenic aldehydes. As these aldehydes react essentially with sulphydryl groups, their action on titratable thiol groups microtubular protein was studied. These compounds evidenced an inhibitory effect on this parameter and on tubulin polymerization, where sulphydryls are essential. 4-Hydroxy-alkenals inhibit tubulin polymerization in a dose-dependent manner (0.1-1 mM), with the exception of 4-hydroxy-octenal, that shows an inhibitory action only in concentrations from 0.5 mM up. Its behaviour is very anomalous: in fact the tubulin-colchicine binding, is stimulated rather than inhibited, whereas such binding is inhibited by the other tested aldehydes. Our present results give then a support for an interaction between 4-hydroxy-alkenals and microtubular protein.

Aldehydes↗
PubMed1992

Photoionization assessment of C3-C5 alkadienes and alkenes in urban air.

Hydrocarbons from samples of traffic-polluted urban air were separated by gas chromatography on an aluminium oxide column and assessed simultaneously by photoionization detection (PID) and flame ionization detection (FID) after effluent splitting. The 10.2 eV photoionization detector selectively detects alkadienes and alkenes but not alkanes and alkynes in the C3-C5 region. The maximum PID/FID response ratio for alkadienes and alkenes is also obtained in this region. The analytical system as a whole is particularly favourable for the C3-C5 alkenes. Analytical data are given for propadiene, 1,3-butadiene, propene, butenes and pentenes.

Air Pollutants↗
PubMed2004

Gas chromatography of trimethylsilyl derivatives of alpha-methoxyalkyl hydroperoxides formed in alkene-O3 reactions.

The synthesis of trimethylsilyl (TMS) hydroperoxide derivatives for gas chromatography (GC) was studied using N-methyl-N-(trimethylsilyl) trifluoroacetamide (MSTFA) for derivatization of cumene hydroperoxide (CMOOH) (alpha,alpha'-dimethylbenzyl hydroperoxide) and alpha-methoxyalkyl hydroperoxides formed by liquid- and gas-phase ozonolysis of a series of terminal alkenes in the presence of methanol (CH3OH). Derivatization efficiencies >90% were achieved over a wide range of solution concentrations. The major compounds identified by GC-mass spectrometry of the derivatized products of alkene-O3 reactions were alpha-methoxyalkyl hydroperoxides, methyl esters, and aldehydes. Yields of alpha-methoxyalkyl hydroperoxides and methyl esters were quantified using effective carbon numbers (ECNs) and used to determine the yields of stabilized Criegee intermediates (SCIs) from gas-phase ozonolysis reactions. Such measurements are important for understanding the atmospheric chemistry of alkene emissions. SCI yields measured for the reactions of 1-octene [CH3(CH2)5CH=CH2], 1-nonene [CH3(CH2)6CH=CH2 ], and 2-methyl-1-octene [CH3(CH2)5C(CH3)=CH2] are consistent with previous measurements or predictions based on literature data. SCI yields measured for the reactions of 1-decene [CH3(CH2)7CH=CH2], 1-dodecene [CH3 (CH2)9CH=CH2], and 1-tetradecene [CH3(CH2)11CH=CH2] are much lower than expected, apparently due to side reactions with low volatility aldehydes that form peroxyhemiacetals, which are not amenable to GC analysis. In general, the results indicate that off-line MSTFA derivatization can be an efficient means for increasing the stability of thermally labile hydroperoxides for identification and quantitation by GC, and offers a new approach for the analysis of these environmentally important compounds.

Alkenes↗
PubMed2004

Determination of the adsorption model of alkenes and alcohols on sulfonic copolymer by inverse gas chromatography.

The determination of a number of adsorption sites on sulfonated styrene-divinylbenzene copolymer for alkenes (propene, 1-butene, 1-pentene, 1-hexene, 1-heptene, isobutene, 2-methyl-1-butene, 2-methyl-2-butene, 2-methyl-1-pentene, 2-methyl-2-pentene and 2-methyl-2-hexene) and alcohols (methanol, ethanol and n-propanol, n-butanol, 2-butanol and tert-butanol) was performed by the saturation copolymer with vapors of adsorbate, by removing the excess of adsorbate from copolymer by blowing the inert gas through copolymer bed and by the desorption of adsorbed alcohol in the programmed increase of temperature. The adsorption measurements were performed on sulfonated ion-exchange resin (Amberlyst 15) with different concentrations of the acid group, which means with a varying number of adsorption sites. The following adsorption models for alkenes were suggested: the first in which one molecule of alkene is adsorbed by two sulfonic groups, for linear alcohols, the second in which one sulfonic group can adsorb one molecule of alcohol and for non-linear alcohols the third where one molecule of alcohol is adsorbed by two or more sulfonic groups.

Adsorption↗
PubMed2004

Growth and cellular fatty-acid composition of a sulphate-reducing bacterium, Desulfatibacillum aliphaticivorans strain CV2803T, grown on n-alkenes.

The anaerobic degradation of n-alkenes by a sulphate-reducing bacterium Desulfatibacillum aliphaticivorans strain CV2803T was investigated. Results suggest that enzymes required for alkene degradation are inducible. Moreover, total cellular fatty acids of strain CV2803T were predominantly C-odd when the strain was grown on C-odd substrates and C-even when grown on C-even substrates. In addition to classical bacterial fatty acids, unusual 4-Me-17:1delta11 and 4-Me-18:1delta11 fatty acids and their saturated homologues were detected when strain CV2803T was grown on 1-pentadecene and 1-hexadecene, respectively. These methyl-branched monounsaturated fatty acids could constitute specific metabolites of n-alkene degradation by sulphate-reducing bacteria.

Alkenes↗
PubMed1999

Semi-empirical topological method for the prediction of the chromatographic retention of cis- and trans-alkene isomers and alkanes.

A new index is proposed for the prediction of the chromatographic retention of the cis- and trans-n-alkene isomers and alkanes. This index is based on the hypothesis that the chromatographic retention of the molecule is due to the interaction of each carbon atom with the stationary phase, and consequently the index is reduced by its neighbours' steric effects. The topological values are obtained by a numerical approximation considering the general behaviour of the chromatographic retention of the compounds. The simple linear regressions between the chromatographic retention and the index proposed for all branched alkanes and also isomers of the studied straight-chain C5 and C14 alkenes (1-ene, cis- and trans-2-, 3-, 4-, 5-, 6- and 7-enes) is very good (the correlation coefficient is r = 0.9999), and the elution sequence is correct for most of them. The models have a high predictive ability, as established by cross-validation values (r2cv). Thus, this new method, different from those already existent, can be used as complementary tool for the elucidation of the molecular structure, or prediction of the chromatographic retention of the cis- and trans-alkene isomers and branched alkanes. It could be extended with success, in the future, to the other types of compounds.

Alkanes↗
PubMed2000

Assay of ezlopitant, a substance P receptor antagonist, and metabolites in biological matrices by gas chromatography with mass spectrometric detection: simultaneous analysis of a benzyl alcohol and alkene.

A method for the analysis of the substance P antagonist ezlopitant and two active metabolites in serum using solid-phase extraction followed by GC-MS analysis is described. The linear dynamic range was 1.0 to 100 ng/ml and precision and accuracy over this range were within 15%. Upon injection of reconstituted sample extracts into the hot injector port of the gas chromatograph, the benzyl alcohol metabolite undergoes a small amount of spontaneous dehydration to the alkene metabolite. We have incorporated an additional hexadeuterated internal standard of the benzyl alcohol into the assay to permit measurement of the extent of dehydration in each sample. This novel approach should be generally applicable to the simultaneous determination of benzyl alcohols and corresponding alkenes by GC-MS when the possibility exists that the alcohol can undergo spontaneous dehydration to the alkene in the injector port of GC instrumentation.

Alkenes↗
PubMed2000

Reactions of hydroxyl radicals with alkenes in low-temperature matrices.

The reactions of hydroxyl radicals with a number of stable alkenes have been studied in low-temperature matrices. The reactions were initiated by broad band UV-visible irradiation of matrices containing H2O2, and the alkene under investigation. The hydroxyalkyl radical products were identified principally by comparison of their spectra with the spectra of corresponding stable alcohols. Accordingly, IR spectra were recorded for the following series of alcohols isolated in argon matrices--methanol, ethanol, ethanol-d6, propan-1-ol, propan-2-ol, butan-2-ol, 2-methylpropan-1-ol (iso-butyl alcohol), 2-methylpropan-2-ol (tert-butyl alcohol), 2-methylbutan-2-ol (tert-amyl alcohol), 3-methylbutan-2-ol and 2,3-dimethylbutan-2-ol. The hydroxyalkyl radicals, which appear to be formed from the alkenes studied were as follows--from ethene, 2-hydroxyethyl radical: from cis- or trans-but-2-ene. 1-methyl-2-hydroxypropyl radical; from propene, 1-methyl-2-hydroxyethyl and 2-hydroxypropyl radicals; from but-1-ene. 1-hydroxymethylpropyl and 2-hydroxybutyl radicals; from 2-methylpropene (iso-butene), 1,1-dimethyl-2-hydroxyethyl and 2-methyl-2-hydroxypropyl radicals; the radical products from buta-1,3-diene and isoprene could not be identified. In the cases, where two radical products were possible, i.e. when propene, but-1-ene or 2-methylpropene were the substrates, it was found that the concentration of the secondary or tertiary radical always exceeded that of the primary radical. However, the relative concentration of these radicals appears to be determined by subsequent photolysis to give carbonyl compounds. There seems, therefore, to be little preference for the secondary and tertiary radicals over the primary radicals in the primary addition process. Comments on the mechanism of the transformation from radical to carbonyl compound based upon identification of intermediates within the matrix and isotopic substitution experiments are made. The characterisation of the 2-hydroxyethyl radical has been backed up by experiments utilising isotopic substitution with 13C and D (2H). The other radicals have been identified with varying degrees of certainty. Those radicals, which are observed at the highest concentration and which are, therefore, characterised more certainly are--2-hydroxyethyl (1), from ethene: 1-methyl-2-hydroxypropyl (2), from cis- and trans-but-2-ene; 1-methyl-2-hydroxyethyl (3), from propene; 1-hydroxymethylpropyl (5), from but-1-ene; and 1,1- dimethyl-2-hydroxyethyl (8), from 2-methylpropene.

Alcohols↗
PubMed2001

Direct measurement of OH radicals from ozonolysis of selected alkenes: a EUPHORE simulation chamber study.

Reactions of ozone with alkenes can be a significant source of hydroxyl radicals in the atmosphere. In the present paper, the formation of OH radicals in the ozonolysis of selected alkenes under atmospheric conditions was directly observed. The experiments were carried out in the European photoreactor EUPHORE (Valencia, Spain). OH radicals were quantitatively detected by means of laser-induced fluorescence (LIF) using a new analytical instrument, which has been constructed on the basis of an existing setup already established in field studies. The OH radicals observed resulted directly from the reaction of ozone with the corresponding alkene. There was no indication that OH radicals were produced in the system by secondary processes. The experimentally observed concentration-time profiles of OH and ozone were excellently described by chemical modeling using explicit reaction mechanisms. The following OH yields were derived: 2,3-dimethyl-2-butene: (1.00 +/- 0.25); 2-methyl-2-butene: (0.89 +/- 0.22); trans-2-butene: (0.75 +/- 0.19); alpha-pinene: (0.91 +/- 0.23). In addition, the experiments carried out were modeled using the Regional Atmospheric Chemistry Mechanism (RACM), an established condensed chemical model applied in tropospheric chemistry. For 2,3-dimethyl-2-butene, 2-methyl-2-butene, and trans-2-butene the calculated concentration-time profiles of OH and ozone are in quite good agreement with the experimental data. However, in the case of alpha-pinene, the model fails for the simulation of OH due to the high grade of mechanism condensation, which results in a poor characterization of the primary reaction products.

Air Pollutants↗
PubMed2002

Metal-catalyzed silacyclopropanation of mono- and disubstituted alkenes.

As an alternative to the strongly reducing conditions necessary for the formation of silacyclopropanes, silylene transfer was developed as a mild, functional group tolerant method of silacyclopropanation. Complex silacyclopropanes were formed from functionalized alkenes using cyclohexane di-tert-butyl silacyclopropane, 1, as the source of t-Bu(2)Si. Di-tert-butyl silylene can be generated from 1 through the use of a catalytic amount of a metal salt. At -27 degrees C, silver triflate catalyzes the transfer of t-Bu(2)Si from 1 to mono- and disubstituted alkenes stereospecifically and diastereoselectively. In situ functionalization of silacyclopropanes with catalytic zinc bromide and methyl formate provides for an expedient one-flask synthesis of complex oxasilacyclopentanes from alkenes.

Alkenes↗
PubMed2003

Mechanism of di-tert-butylsilylene transfer from a silacyclopropane to an alkene.

Kinetic and thermodynamic studies of the reactions of cyclohexene silacyclopropane 1 and monosubstituted alkenes suggested a possible mechanism for di-tert-butylsilylene transfer. The kinetic order in cyclohexene silacyclopropane 1 and cyclohexene were determined to be 1 and -1, respectively. Saturation kinetic behavior in monosubstituted alkene concentration was observed. Competition experiments between substituted styrenes and a deficient amount of di-tert-butylsilylene from 1 correlated well with the Hammett equation and provided a rho value of -0.666 +/- 0.008, using sigma(p) constants. These data supported a two-step mechanism involving reversible di-tert-butylsilylene extrusion from 1, followed by irreversible concerted electrophilic attack of the silylene on the monosubstituted alkene. Eyring activation parameters were found to be DeltaH++ = 22.1 +/- 0.9 kcal.mol(-1) and DeltaS++ = -15 +/- 2 eu. Competition experiments between cycloalkenes and allylbenzene determined cycloalkenes to be more efficient silylene traps (k(rel) =1.3, DeltaDeltaG++ = 0.200 kcal.mol(-1)). A summary of the data resulted in a postulated reaction coordinate diagram. The mechanistic studies enabled rational modification of reaction conditions that improved the synthetic utility of silylene transfer. Removal of the volatile cyclohexene from the reaction mixture into an evacuated headspace led to the formation of previously inaccessible cyclohexene-derived silacyclopropanes.

Alkenes↗
PubMed2004

Mechanism of silver-mediated di-tert-butylsilylene transfer from a silacyclopropane to an alkene.

Kinetic studies of the reactions of cyclohexene silacyclopropane 1 and monosubstituted alkenes in the presence of 5 mol % of (Ph3P)2AgOTf suggested a possible mechanism for silver-mediated di-tert-butylsilylene transfer. The kinetic order in cyclohexene silacyclopropane 1 was determined to be one. Inverse kinetic saturation behavior (rate inhibition) was observed in monosubstituted alkene and cyclohexene concentrations. Saturation kinetic behavior in catalyst concentration was observed. A reactive intermediate, a silylsilver complex, was observed using low temperature 29Si NMR spectroscopy. Competition experiments between substituted styrenes and a deficient amount of 1 correlated well with the Hammett equation and provided a rho value of -0.62 +/- 0.02 using sigmap constants. These data support a mechanism involving reversible silver-promoted di-tert-butylsilylene extrusion from 1 followed by irreversible concerted electrophilic attack of the silylsilver intermediate on the alkene.

Alkenes↗
PubMed2005

Simple alkenes as substitutes for organometallic reagents: nickel-catalyzed, intermolecular coupling of aldehydes, silyl triflates, and alpha olefins.

A nickel-catalyzed method for the three-component coupling of alkenes (ethylene and alpha olefins), aldehydes, and silyl triflates is described, and this process represents the first catalytic method for coupling aldehydes and alkenes to give allylic alcohol derivatives. Conceptually, the alkene functions as a replacement for an alkenylmetal reagent.

Aldehydes↗
PubMed2005

Ru-catalyzed alkene-alkyne coupling. Total synthesis of amphidinolide P.

A coordinatively unsaturated ruthenium complex catalyzed the formation of a carbon-carbon bond between two judiciously chosen alkene and alkyne partners in good yield, and in a chemo- and regioselective fashion, despite the significant degree of unsaturation of the substrates. The resulting 1,4-diene forms the backbone of the cytotoxic marine natural product amphidinolide P. The alkene partner was rapidly assembled from (R)-glycidyl tosylate, which served as a linchpin in a one-flask, sequential three-components coupling process using vinyllithium and a vinyl cyanocuprate. The synthesis of the alkyne partner made use of an unusual anti-selective addition under chelation-control conditions of an allyltin reagent derived from tiglic acid. In addition, a remarkably E-selective E2 process using the azodicarboxylate-triphenylphosphine system is featured. Also featured is the first example of the use of a beta-lactone as a thermodynamic spring to effect macrolactonization. The oxetanone ring was thus used as a productive protecting group that increased the overall efficiency of this total synthesis. This work was also an opportunity to further probe the scope of the ruthenium-catalyzed alkene-alkyne coupling, in particular using enynes, and studies using various functionalized substrates are described.

Alkenes↗
PubMed2006

Highly regioselective Pd-catalyzed intermolecular aminoacetoxylation of alkenes and evidence for cis-aminopalladation and S(N)2 C-O bond formation.

Synthetic methods that achieve oxidative 1,2-difunctionalization of alkenes are very powerful in organic chemistry. Here we report the first examples of intermolecular Pd-catalyzed aminoacetoxylation of alkenes with phthalimide as the nitrogen source and PhI(OAc)2 as the stoichiometric oxidant and source of acetate. These reactions are highly regio- and diastereoselective, and mechanistic studies reveal that the reaction proceeds via cis-aminopalladation of the alkene followed by oxidative cleavage of the intermediate Pd-C bond with inversion of stereochemistry.

Alkenes↗
PubMed2001

Sesquiterpene, alkene, and alkane hydrocarbons in virgin olive oils of different varieties and geographical origins.

The hydrocarbon fraction of 30 virgin olive oils was analyzed, focusing in particular on the sesquiterpenes. The oil samples were of different geographical origins and obtained from different olive varieties. The hydrocarbon fraction was isolated by silica gel column chromatography of the unsaponifiable fraction of the oils. The sesquiterpene hydrocarbons were then fractionated, on the basis of their degree of unsaturation, by AgNO3 TLC and silica gel AgNO3 column chromatography. The composition of the sesquiterpenes was more complex than previously reported. Among the 31 sesquiterpenes detected, 24 have been tentatively identified, by comparison of the linear retention indices on two capillary columns of different polarities and mass spectra with those reported in the literature. The total concentration of the sesquiterpenes in the oils analyzed ranged from about 2 to 37 ppm. Among the sesquiterpenes the more abundant were alpha-farnesene, alpha-copaene, eremophyllene, and alpha-muurolene. The alkenes present in the hydrocarbon fraction were isolated by TLC AgNO3 and characterized by GC-MS of their dimethyl disulfide derivatives. The series of n-Delta9-alkenes from C22 to C27, 8-heptadecene, and 6,10-dimethyl-1-undecene were detected. Among the n-alkanes, those with an odd number of carbon atoms predominated in all of the analyzed oils, the most common being C23, C25, C27, and C29. The concentration of the n-alkenes ranged from about 0.5 to 2 ppm, whereas for the n-alkanes the range was from 30 to 177 ppm.

Alkanes↗
PubMed2005

Detailed process of adsorption of alkanes and alkenes on zeolites.

The adsorption of alkanes and alkenes on zeolites is investigated by comparing the adsorption characteristics for three types of zeolite: ferrierite, ZSM-5, and mordenite. The activation energy for the diffusion of propane and n-butane on ferrierite and the heat of adsorption of C(2)-C(4) alkanes and alkenes on zeolites and silica are estimated based on Fourier transform infrared spectroscopy, and the diffusion processes in the micropores are elucidated by comparing the results with previously reported activation energies for n-butene diffusion. The adsorption of 1-butene on mordenite is also examined. The structure and process of experimentally observable adsorption is found to differ depending on the type of zeolite and adsorbing molecule, reflecting differences in the sizes of molecules and pores. This differing behavior is utilized to interpret the elementary adsorption processes of alkanes and alkenes on zeolites.

Adsorption↗
PubMed2006

Nonradical mechanisms for the uncatalyzed thermal functionalization of silicon surfaces by alkenes and alkynes: a density functional study.

We propose a new concerted mechanism for the uncatalyzed hydrosilylation of terminal alkenes and alkynes, alternative to the conventional radical-based mechanism. Density functional calculations have been carried out on these and on previously proposed alternative mechanisms for the hydrosilylation of ethylene and acetylene by suitable finite size clusters as models of the thermal functionalization of -SiH3, =SiH2, and [triple bound] SiH groups in flat Si(100) and Si(111) and porous silicon surfaces by alkenes and alkynes. For each step involved in the considered hydrosilylation pathways, we optimized the geometries of reactants and products and located the corresponding transition states. The calculated activation energies for the concerted pathways of ethylene and acetylene are, respectively, 57.6 and 60.9 kcal mol(-1) on -SiH3 and in the ranges 62-63 and 58-61 kcal mol-1 on =SiH2 and 64-66 and 56-61 kcal mol(-1) on SiH. These values are much lower than the activation energies calculated for the corresponding homolytic dissociation of the Si-H bond, which is the preliminary step in the radical path, 85.6, 82-83, and 79-81 kcal mol(-1), respectively, for -SiH3, =SiH2, and [triple bound] SiH groups. Our results thus suggest that the thermal hydrosilylation of alkenes and alkynes on silicon surfaces, for which a radical-based mechanism is currently accepted, may occur through a concerted mechanism.

Acetylene↗