SEARCH · Search PubMed

Results for “Rotation”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79Linked to original sources

PubMed1997

Rotational changes of the vertebral pelvic axis after sublaminar instrumentation in adolescent idiopathic scoliosis.

STUDY DESIGN: The authors studied the rotational effect of sublaminar wiring on the spinal pelvic axis on 20 patients who were being treated for adolescent idiopathic scoliosis. OBJECTIVES: To determine if sublaminar wiring effectively derotates the scoliotic spine. SUMMARY OF BACKGROUND DATA: The correction of the rotational deformity in adolescent scoliosis via sublaminar wiring is not well quantified in the literature. The derotation maneuver of Cotrel-Dubousset has been shown to produce variable and unpredictable amounts of axial derotation. METHODS: Twenty patients who underwent posterior spine fusion for adolescent idiopathic scoliosis were evaluated using computed tomography scans and plain radiography before and after surgery and at a subsequent follow-up examination (average time of follow-up examination, 35 months after surgery). The degree of angle of vertebral rotation about the sagittal plane and that relative to the pelvis were measured before and after surgery and at a follow-up examination. RESULTS: The primary thoracic curves were not derotated significantly relative to the pelvis with sublaminar wiring. Primary thoracolumbar curves instrumented on the convexity with pedicle screws were derotated significantly relative to the pelvis (P = .001). The average initial correction was 57%. On final follow-up examination, the correction was 24% (18 of 20 twenty individuals lost axial correction by an average of 34%). In nine of 20 patients the spine was more rotated, relative to the pelvis, than it had been before surgery. No coronal or sagittal decompensation was seen in any curve type. CONCLUSIONS: Coronal and sagittal plane correction of scoliotic curves may be achieved with sublaminar instrumentation. The ability to derotate axially the scoliotic spine appears to be variable, however, and, in most cases, curve-type dependent. Over time, much correction appears to be lost, and in many patients the scoliosis actually becomes worse than it was before surgery. Nonetheless, the apical derotation that takes place appears to be reasonably true: the percent correction of angle of rotation about the sagittal plane and the percent correction of angle of rotation about the sagittal plain relative to the pelvis were closely correlated. Derotation forces applied to the instrumented spine do not appear to be transmitted to more distal segments.

Adolescent↗

PubMed2000

Motion in lumbar functional spine units during side bending and axial rotation moments depending on the degree of degeneration.

STUDY DESIGN: Human lumbar spine specimens were tested in axial rotation and side bending. Motion was related to the grade of degeneration. OBJECTIVES: To determine the degree to which degeneration with fissure formation in the disc affects axial rotation of the lumbar functional spine unit. SUMMARY OF BACKGROUND DATA: There is controversy in the literature regarding the influence of severe degeneration and fissures of the disc on the range of axial rotation. METHODS: Thirty-six lumbar spine specimens were tested in axial rotation and side bending, by applying pure moments in an unconstrained setting. The motion in 6 df was recorded by dial gauges. The grade of degeneration was established by the grading schemes of Nachemson, Thompson, Adams, and Mimura. RESULTS: A significant increase of axial rotation and lateral translation under torque was found. This increase mainly took place between Grade 3 according to the schemes of Nachemson, Thompson, and Adams (no fissure formation) and the higher grades of degeneration (defined by fissure formation). Reduced disc height was always associated with fissures. CONCLUSIONS: A reduced lumbar disc height in radiographs seems to be associated with fissure formation in the disc. In this case, the range axial rotation after torque is increased in comparison with cases with less degeneration.

Adult↗

PubMed2002

Diverging intramuscular activity patterns in back and abdominal muscles during trunk rotation.

STUDY DESIGN: An intramuscular electromyographic study was performed on trunk rotations during sitting and standing. OBJECTIVE: The aim was to provide new information on activation levels for deep trunk muscles in various unresisted and resisted trunk rotations. SUMMARY AND BACKGROUND DATA: Frequent daily trunk twisting and decreased maximal strength during trunk rotation have been associated with low back pain or sciatic pain. However, the involvement of deep trunk muscles during different trunk rotations is relatively unknown. METHODS: Ten healthy subjects participated. Fine-wire electrodes were inserted, under ultrasound guidance, into psoas, quadratus lumborum, the superficial medial lumbar erector spinae (ES-s, multifidus) and its deep lateral portion (ES-d, iliocostalis), iliacus, rectus abdominis, obliquus externus, and obliquus internus. RESULTS: The highest involvement for all muscles was observed on the ipsilateral side, in maximal trunk twists with shoulder resistance, except obliquus externus, which showed a dominant contralateral side, and rectus abdominis, which was little activated in all rotations. In contrast, maximal trunk twist without shoulder resistance, i.e., freely performed, resulted generally in lower levels for all muscles involved and in a shift of side dominance for the lumbar muscles quadratus lumborum, psoas, and ES-s. CONCLUSIONS: During trunk rotations the activity patterns for various trunk muscles could drastically change, and even be the opposite, between the two body sides, within the same type of task, depending on several factors such as initial position, effort level, sitting or standing, and external shoulder resistance.

Abdomen↗

PubMed2006

Automatic measurement of vertebral rotation in idiopathic scoliosis.

STUDY DESIGN: Development of an automatic measurement algorithm and comparison with manual measurement methods. OBJECTIVES: To develop a new computer-based method for automatic measurement of vertebral rotation in idiopathic scoliosis from computed tomography images and to compare the automatic method with two manual measurement techniques. SUMMARY OF BACKGROUND DATA: Techniques have been developed for vertebral rotation measurement in idiopathic scoliosis using plain radiographs, computed tomography, or magnetic resonance images. All of these techniques require manual selection of landmark points and are therefore subject to interobserver and intraobserver error. METHODS: We developed a new method for automatic measurement of vertebral rotation in idiopathic scoliosis using a symmetry ratio algorithm. The automatic method provided values comparable with Aaro and Ho's manual measurement methods for a set of 19 transverse computed tomography slices through apical vertebrae, and with Aaro's method for a set of 204 reformatted computed tomography images through vertebral endplates. RESULTS: Confidence intervals (95%) for intraobserver and interobserver variability using manual methods were in the range 5.5 degrees to 7.2 degrees . The mean (+/-SD) difference between automatic and manual rotation measurements for the 19 apical images was -0.5 degrees +/- 3.3 degrees for Aaro's method and 0.7 degrees +/- 3.4 degrees for Ho's method. The mean (+/-SD) difference between automatic and manual rotation measurements for the 204 endplate images was 0.25 degrees +/- 3.8 degrees . CONCLUSIONS: The symmetry ratio algorithm allows automatic measurement of vertebral rotation in idiopathic scoliosis without intraobserver or interobserver error due to landmark point selection.

Algorithms↗

PubMed2002

Fast rotational matching.

A computationally efficient method is presented - 'fast rotational matching' or FRM - that significantly accelerates the search of the three rotational degrees of freedom (DOF) in biomolecular matching problems. This method uses a suitable parametrization of the three-dimensional rotation group along with spherical harmonics, which allows efficient computation of the Fourier Transform of the rotational correlation function. Previous methods have used Fourier techniques only for two of the rotational DOFs, leaving the remaining angle to be determined by an exhaustive search. Here for the first time a formulation is presented that makes it possible to Fourier transform all three rotational DOFs, resulting in notable improvements in speed. Applications to the docking of atomic structures into electron-microscopy maps and the molecular-replacement problem in X-ray crystallography are considered.

Crystallography, X-Ray↗

PubMed1997

An optimal rotator for iterative reconstruction.

For implementations of iterative reconstruction algorithms that rotate the image matrix, the characteristics of the rotator may affect the reconstruction quality. Desirable qualities for the rotator include: 1) preservation of global and local image counts; 2) accurate count positioning; 3) a uniform and predictable amount of blurring due to the rotation. A new rotation method for iterative reconstruction is proposed which employs. Gaussian interpolation. This method was compared to standard rotation techniques and is shown to be superior to standard techniques when measured by these qualities. The computational cost was demonstrated to be only slightly more than bilinear interpolation.

Algorithms↗

PubMed2006

A correlation-based approach to calculate rotation and translation of moving cells.

We present a noniterative image cross-correlation approach to track translation and rotation of crawling cells in time-lapse video microscopy sequences. The method does not rely on extracting features or moments, and therefore does not impose specific requirements on the type of microscopy used for imaging. Here we use phase-contrast images. We calculate cell rotation and translation from one image to the next in two stages. First, rotation is calculated by cross correlating the images' polar-transformed magnitude spectra (Fourier magnitudes). Rotation of the cell about any center in the original images results in translation in this representation. Then, we rotate the first image such that the cell has the same orientation in both images, and cross correlate this image with the second image to calculate translation. By calculating the rotation and translation over each interval in the movie, and thereby tracking the cell's position and orientation in each image, we can then map from the stationary reference frame in which the cell was observed to the cell's moving coordinate system. We describe our modifications enabling application to nonidentical images from video sequences of moving cells, and compare this method's performance with that of a feature extraction method and an iterative optimization method.

Algorithms↗

PubMed1995

Experimental occlusal interferences. Part IV. Mandibular rotations induced by a pliable interference.

In 12 subjects, a pliable, yet unbreakable, intercuspal interference (aluminum shim onlay splint; uniform height of 0.25 mm) was placed between either the right or left maxillary and mandibular second premolars and first molars. During brief and forceful biting (dynamic chewing stroke of about 20 kg force) the interference emulated a semisoft food bolus, and at the end of biting (subsequent static clenching stroke of about 20 kg force) it emulated a rigid metal interference. During dynamic/static biting, rotational electrognathography measured maximum frontal and horizontal plane torque of the right and left mandibular condyles. Eleven subjects (92%) showed frontal plane upward rotation (mean of 1.0 degree) of the condyle contralateral to the interference, and one subject (8%) showed frontal plane upward rotation (0.4 degree) of the condyle ipsilateral to the interference. Two subjects (17%) showed no horizontal plane rotation; seven subjects (58%) showed backward rotation (mean of 0.4 degree) of the condyle contralateral to the interference; and three subjects (25%) showed backward rotation (mean of 0.3 degree) of the condyle ipsilateral to the interference. It is suggested that, in the presence of an occlusal interference, mastication may have both short- and long-term detrimental effects.

Adult↗

PubMed1988

An EPR study of the rotational dynamics of actins from striated and smooth muscle and their complexes with heavy meromyosin.

The rotational motions of the actin from rabbit skeletal muscle and from chicken gizzard smooth muscle were measured by conventional and saturation transfer electron paramagnetic resonance (EPR) spectroscopy using maleimide spin-label rigidly bound at Cys-374. The conventional EPR spectra indicate a slight difference in the polarity of the environment of the label and in the rotational mobility of the monomeric gizzard actin compared to its skeletal muscle counterpart. These differences disappear upon polymerization. The EPR spectra of the two actins in their F form and in their complexes with heavy meromyosin (HMM) did not reveal any difference in the rotational dynamic properties that might be correlated with the known differences in the activation of myosin ATPase activity by smooth and skeletal muscle actin. Our results agree with earlier EPR studies on skeletal muscle actin in showing that polymerization stops the nanosecond rotational motion of actin monomers and that F-actin undergoes rotational motion having an effective correlation time of the order of 0.1 ms. However, our measurements show that complete elimination of the nanosecond motions requires prolonged incubation of F-actin, suggesting that the slow formation of interfilamental cross-links in concentrated F-actin solutions contributes to this process. We have also used the EPR spectroscopy to study the interaction between HMM and actin in the F and G form. Our results show that in the absence of salt one HMM molecule can cooperatively interact with eight monomers to produce a polymer which closely resembles F-actin in its rotational mobility but differs from the complex of F-actin with HMM. The results indicate that salt is necessary for further slowing down, in a cooperative manner, the sub-millisecond internal motion in actin polymer and for a non-cooperative change in the intramonomer conformation around Cys-374 on the binding of HMM.

Actins↗

PubMed1998

Radiographic assessment of equine interphalangeal joints asymmetry: articular impact of phalangeal rotations (Part I).

This study is part of a work to develop a radiographic method that defines objectively the individual conformation of an equine digit and its appropriate trimming. The authors used isolated distal limbs on a rotation support to study the influence of induced foot rotations on several angles measured from specific radiographs. The results of this work enabled the authors to quantify the rotation of the proximal phalanx compared to the distal, and to determine exactly the possible rotation in the distal interphalangeal joint. It was also observed that, faced with a forced rotation of the foot, the digit responded by a hoof plastic deformity, a distal interphalangeal intra-articular rotation and asymmetrical interphalangeal compressions.

Animals↗

PubMed2006

A laboratory study to determine the effects of universal and rotating ultrasonic inserts on wrist movement and scaling time efficiency of dental hygienists.

PURPOSE: The purpose of this study was to determine if differences existed in range of wrist movements and scaling time efficiency of dental hygienists using a rotating ultrasonic insert when compared with a standard universal insert. METHODS: A convenience sample of 32 consenting experienced dental hygienists who met inclusion criteria was invited to participate. Using a cross-over research design, the 32 participants were randomly assigned to one of the two subgroups. Subgroup A (n = 16) used the rotating universal ultrasonic insert on a typodont, rested for 15 min and the standard universal insert on a different typodont. Subgroup B (n = 16) used the standard universal ultrasonic insert on a typodont, rested for 15 min and the rotating universal ultrasonic insert on a different typodont. Each participant used the rotating and standard universal ultrasonic scaling inserts to remove 2 cm3 artificial calculus from two different typodonts for up to 15 min per insert. Scaling time efficiency was determined using a Modified Volpe-Manhold Calculus Index, measuring the amount of artificial calculus remaining after ultrasonic scaling. While scaling, each participant wore the WristSensor goniometry gloves, which determined changes in wrist movements (flexion and extension and ulnar and radial deviations), measured as a deviation from the neutral position. RESULTS: A paired t-test (P = 0.05) using 30 subjects with useable data, revealed no statistically significant differences between the two different inserts in terms of wrist movements and scaling time efficiency. A multivariate analysis of variance revealed no statistically significant differences in the percentage of time dental hygienists were in high, medium or low-risk posture categories while using the rotating ultrasonic insert compared with the standard universal insert. Based on the results of this laboratory study, dental hygienists using a rotating ultrasonic insert appear to experience no ergonomic advantage in terms of wrist postures or timesavings over a standard insert.

Cross-Over Studies↗

PubMed1994

A cone beam SPECT reconstruction algorithm with a displaced center of rotation.

A filtered backprojection (FBP) algorithm is derived based on Feldkamp's FBP algorithm for a cone beam geometry that has a displaced center of rotation. In cone beam single photon emission computed tomography (CB-SPECT) the center of rotation displacement can degrade the reconstructed images. The center of rotation displacement of interest is mechanical shift, which is the displacement of the midplane of the cone beam collimator off the rotation center. Mechanical shift is characterized by two orthogonal components: the shift of the midplane of the cone beam collimator along the direction of the axis of rotation, and the distance between the midline of the cone beam collimator and the axis of rotation. This new algorithm corrects mechanical shift directly by incorporating mechanical shift into the algorithm. This new algorithm is evaluated using both Monte Carlo simulated data and experimentally acquired data. The results demonstrate that this algorithm is able to correct for blurring and the "doughnut" type artifacts caused by system mechanical shift and improve the image resolution.

Algorithms↗

PubMed2005

Reliability of an individually molded shank shell for measuring tibial transverse rotations during the stance phase of walking.

Use of a shank shell has been shown to estimate tibial transverse rotations better than skin-mounted markers. However, the day-to-day reliability of the transverse tibial rotations using an individually molded shank shell has not been previously investigated. This study examined the between-tests and trials reliability of an individually molded shank shell for measuring peak tibial internal and external rotations, time of peak values, and tibia range of motion during 5 walking trials. The trial-to-trial reliability of tibial transverse rotations was measured in 14 healthy individuals while the test-retest reliability was measured in 10 persons on two occasions. Trial-to-trial reliability for peak transverse rotations, time of peak values, and tibia range of motion ranged from ICC (3,1) 0.59-0.95. The PCA between trials showed that 88-99 % of values were within 3 degrees of agreement. Test-retest reliability for peak rotations, tibia range of motion, and time of peak values ranged from ICC (3,1) 0.70-0.89 with SEM 1.6-2.21 degrees , 0.021 %, and 0.034 %, respectively. The PCA between tests showed that 70-100 % of values were within 3 degrees of agreement. The use of an individually molded shell and the close attachment of the shank shell to the individual's shank resulted in reliable test-retest and trial-to-trial data.

Adult↗

PubMed1999

Structural constraints on the coordination of concurrent rotations of the head and a steering device.

Concurrent movements of different effectors are subject to structural constraints that facilitate certain patterns of coordination but impede others. The constraints for concurrent rotations of the head and a bimanually operated steering device were explored in two experiments. To indicate structural constraints, the difference between concurrent periodic rotations in same and different directions with respect to the variable error of synchronization was used. The first experiment showed less error for rotations in same directions than for rotations in opposite directions. In the second experiment, the same result was obtained with a horizontal and a backward-tilted steering wheel. Adding gaze shifts to head oscillations increased the accuracy of synchronization but did not affect the difference between both coordination patterns. In contrast to the synchronization of head and steering device, the variable error of synchronization of gaze and steering wheel did not differ between both modes of coordination; the error was again reduced when head oscillations were added to the saccades between eccentric fixation targets. This suggests space related (or allocentric) constraints, which most likely originate from concurrent specifications of movement directions in coupled spatiotopic maps so that the specification of rotations in the same direction is facilitated in comparison to rotations in opposite directions.

Adult↗

PubMed1998

Atomic contributions to the optical rotation angle as a quantitative probe of molecular chirality.

Chiral molecules are characterized by a specific rotation angle, the angle through which plane-polarized light is rotated on passing through an enantiomerically enriched solution. Recent developments in methodology allow computation of both the sign and the magnitude of these rotation angles. However, a general strategy for assigning the individual contributions that atoms and functional groups make to the optical rotation angle and, more generally, to the molecular chirality has remained elusive. Here, a method to determine the atomic contributions to the optical rotation angle is reported. This approach links chemical structure with optical rotation angle and provides a quantitative measure of molecular asymmetry propagation from a center, axis, or plane of chirality.

Bridged Bicyclo Compounds, Heterocyclic↗

PubMed1987

Rhizobium meliloti swims by unidirectional, intermittent rotation of right-handed flagellar helices.

The 5 to 10 peritrichously inserted complex flagella of Rhizobium meliloti MVII-1 were found to form right-handed flagellar bundles. Bacteria swam at speeds up to 60 microns/s, their random three-dimensional walk consisting of straight runs and quick directional changes (turns) without the vigorous angular motion (tumbling) seen in swimming Escherichia coli cells. Observations of R. meliloti cells tethered by a single flagellar filament revealed that flagellar rotation was exclusively clockwise, interrupted by very brief stops (shorter than 0.1 s), typically every 1 to 2 s. Swimming bacteria responded to chemotactic stimuli by extending their runs, and tethered bacteria responded by prolonged intervals of clockwise rotation. Moreover, the motility tracks of a generally nonchemotactic ("smooth") mutant consisted of long runs without sharp turns, and tethered mutant cells showed continuous clockwise rotation without detectable stops. These observations suggested that the runs of swimming cells correspond to clockwise flagellar rotation, and the turns correspond to the brief rotation stops. We propose that single rotating flagella (depending on their insertion point on the rod-shaped bacterial surface) can reorient a swimming cell whenever the majority of flagellar motors stop.

Chemotaxis↗

PubMed2004

Effective ways of restoring muscular imbalances of the rotator cuff muscle group: a comparative study of various training methods.

BACKGROUND: Many studies have compared different training methods for improving muscular performance, but more investigations need to be directed to the restoration of muscular imbalances. OBJECTIVE: To determine the most effective training for altering strength ratios in the shoulder rotator cuff. METHODS: Forty eight physical education students were randomly assigned to four groups (12 per group): (a) experimental group who carried out multijoint dynamic resistance training for shoulder internal and external rotation movement (pull ups or lat pull downs, overhead press, reverse pull ups, push ups) (MJDR group); (b) experimental group who exercised the same muscle group using dumbbells weighing 2 kg (isolated group); (c) experimental group who followed an isokinetic strengthening programme for the rotator cuff muscle group (isokinetic group); (d) control group who had no strength training. Testing was performed in the supine position with the glenohumeral joint in 90 degrees of abduction in the coronal plane, with a range of motion of 0-90 degrees of external rotation and 0-65 degrees of internal rotation at angular velocities of 60, 120, and 180 degrees /s. The test procedure was performed before and after the exercise period of six weeks. RESULTS: One way analysis of variance found no differences between the groups for the initial tests. Analysis of variance with repeated measures showed that the strength ratios in all the experimental groups had altered after the exercise period, with the isokinetic group showing the most significant improvement. CONCLUSIONS: Isokinetic strengthening is the most effective method of altering strength ratios of the rotator cuff muscle.

Adult↗

PubMed2000

Multidirectional depiction of internal carotid arterial stenosis: three-dimensional time-of-flight MR angiography versus rotational and conventional digital subtraction angiography.

PURPOSE: To evaluate whether and to what extent greater number of projection images obtained at three-dimensional (3D) time-of-flight (TOF) magnetic resonance (MR) angiography versus conventional digital subtraction angiography (DSA) causes overestimation of internal carotid arterial (ICA) stenosis. MATERIALS AND METHODS: DSA (two or three projections), rotational angiography (16 or 32 projections), and 3D TOF MR angiography (12 projections) were performed in 47 stenotic ICAs of 38 symptomatic patients. Two observers independently measured maximum stenosis, and the mean differences among MR angiography, DSA, and rotational angiography were compared. RESULTS: Three rotational and five MR angiograms were nondiagnostic. Seven MR angiograms of ICA stenoses showed a signal void and were excluded from analysis. On the remaining 32 angiograms, mean differences in maximum stenosis for observers 1 and 2, respectively, were 7% (95% CI: 3%, 12%) and 8% (95% CI: 3%, 13%) at MR angiography versus DSA and 2% (95% CI: -2%, 7%) and -1% (95% CI: -5%, 3%) at MR angiography versus rotational angiography. ICA stenosis was graded significantly higher at MR angiography versus DSA, whereas, it was not overestimated at MR angiography versus rotational angiography. The difference in maximum stenosis at MR angiography versus DSA was significantly different from that of MR angiography versus rotational angiography. CONCLUSION: Apparent overestimation of ICA stenosis at 3D TOF MR angiography versus conventional DSA may be partly explained by the greater number of projection images available at 3D TOF MR angiography.

Aged↗