Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Flow Injection Analysis”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78Linked to original sources
PubMed2002

Flow injection spectrophotometric determination of the antibiotic fosfomycin in pharmaceutical products and urine samples after on-line thermal-induced digestion.

A new flow injection (FI) method for the precise and rapid spectrophotometric determination of the antibiotic fosfomycin (FMC) in urine and pharmaceutical samples is described. The method is based on the on-line quantitative thermal-induced digestion of the analyte prior to injection into the FI system. Ammonium persulfate was used as the oxidation reagent. The resulting orthophosphate ions were determined spectrophotometrically (lambda(max) = 690 nm) using the molybdenum blue approach. Chemical and FI variables that affected on-line oxidation were studied and optimized. The proposed method is very precise (s(r) = 1.2% at 1.0 x 10(-4) mol L(-1) FMC, n = 12), offers a high sampling rate of 60 h(-1), and allows for the determination of the analyte in the range 3.0 x 10(-6) to 3.0 x 10(-4) mol L(-1) with a satisfactory 3sigma detection limit of 1.0 x 10(-6) mol L(-1). Application of the proposed method to urine and pharmaceutical samples yielded accurate results with percentage recoveries in the range 96.4-102.5%.

Ammonium Sulfate↗
PubMed1998

Autoxidation rates of neuronal nitric oxide synthase: effects of the substrates, inhibitors, and modulators.

Autoxidation rates of the full-length neuronal nitric oxide synthase (nNOS) were analyzed and found to be composed of three phases, 60 s(-1) (28%), 5.5 s(-1) (11%) and 0.048 s(-1) (61%). Addition of L-Arg, N(G)-hydroxy-L-Arg (NHA), and N(G)-monomethyl-L-Arg markedly decreased the rate constants for the first and second phases down to 12-20 s(-1) and 0.32-2.6 s(-1), respectively. Addition of (6R)-5,6,7,8-tetrahydro-L-biopterin (H4B) increased the amplitude of the second phase up to 29% of the total. Addition of NHA decreased the rate of the first phase by 4.4-fold in the presence of H4B, whereas addition of L-Arg and other modulators did not significantly affect the rates under the same conditions. Thus, we deduce that (1) L-Arg stabilizes the O2-bound ferrous complex for efficient O-O bond cleavage to occur; (2) H4B influences the O2-bound ferrous complex in a fashion different from L-Arg; and (3) NHA induces a characteristic distal-site structure in the presence of H4B, reflecting a difference in the mechanism of activation of O2 in the first step (monooxygenation of L-Arg) and the second step (monooxygenation of NHA).

Animals↗
PubMed1999

Selective reduction method for separate determination of inorganic and total mercury in mussel tissue by flow-injection cold vapor technique.

A flow-injection cold vapor atomic absorption spectrometry (FI-CV-AAS) method was developed to determine inorganic mercury and total mercury in mussel samples obtained from the Galicia coasts. The mussel samples were digested in a microwave oven using an HNO3/H2O2 mixture and then total mercury was determined using sodium borohydride as reducing agent. In a separate subsample, following ultrasonic extraction in hydrochloric acid medium, inorganic mercury was determined by selective reduction using stannous chloride in acid medium as reducing agent. The accuracy of the digestion method was checked by analyzing BCR Reference Material No. 278 Mussel Tissue (Mytilus edulis). There were no significant differences between the certified and found concentration values. As a certified reference material of mussel tissue containing both methylmercury and inorganic mercury was not available, recovery studies on mussel tissue samples spiked with inorganic mercury and methylmercury were done to check the reliability of the method. The results revealed that the mercury contained in mussel samples was methylmercury.

Animals↗
PubMed1993

Refolding of barnase in the presence of GroE.

The refolding of barnase in the presence of GroEL has been monitored on the millisecond to seconds time scale using stopped-flow kinetics. GroEL binds rapidly and tightly to the denatured enzyme with a second-order rate constant of greater than 1.3 x 10(8) s-1 M-1 and slows down greatly the rate of barnase refolding. However, addition of ever increasing concentrations of GroEL does not prevent barnase refolding completely, as would be expected from mass action if folding of barnase could proceed only in free solution. At saturating concentrations of GroEL, barnase refolds with a half-life of 30 s, compared with 50 ms for refolding of free enzyme. The rate-determining step in the refolding of free barnase is the reaction of a "late" folding intermediate. A mutant of barnase that fold more slowly (Ser-->Ala91), refolds at a correspondingly lower rate when bound to GroEL, suggesting that formation of the fully folded state may be rate limiting for folding on GroEL. For the slow-folding Ser-->Ala91 mutant, the rate-determining refolding step has a half-life of 180 ms. In sequential mixing experiments, a delay was introduced to allow the Ser-->Ala91 mutant to refold for 30 ms before being mixed with GroEL. This reduces by 50% the amount of mutant barnase initially bound by GroEL. As only 11% of this mutant barnase is fully refolded from the late intermediate in 30 ms, there is preferential binding of an earlier refolding state to GroEL. We show by single mixing experiments that binding, not hydrolysis, of ATP reduces the lag in regain of barnase activity seen with GroEL alone. In the presence of high concentrations of ATP and GroEL the rate constant for refolding of barnase approaches that found in their absence, probably because ATP reduces the affinity of GroEL for refolding barnase, such that bound barnase is released and refolds unhindered. The addition of exceedingly small quantities of GroES in the presence of excess GroEL and a moderate amount of ATP also has a marked effect on the barnase refolding rate constant, suggesting that GroES may have higher affinity for the barnase: GroEL complex than for GroEL.

Adenosine Triphosphate↗
PubMed2001

Core and surface mutations affect folding kinetics, stability and cooperativity in IL-1 beta: does alteration in buried water play a role?

Interleukin-1 beta (IL-1 beta) is a cytokine and a member of the beta-trefoil superfamily of protein structures. An interesting feature in the folding of IL-1 beta, shared with some other members of the same topological family, is the existence of a slow step in folding to the native conformation from a discrete intermediate. Wanting to probe the nature of this slow step in the folding of WT IL-1 beta (tau(1)=45 seconds), we made ten sequence variants of IL-1 beta (L10A, T9Q, T9G, C8S, C8A, N7G, N7D, L6A, R4P, and R4Q), where all mutations are located along strand 1. This strand is not protected from hydrogen exchange until late in folding. Most of the mutations showed little effect on the kinetics of folding for IL-1 beta. However, C8 is clearly involved in both the late and the early steps in folding, while sequence variants at L10 and L6 affect only late events in folding. The value of the slowest relaxation time, tau(1), which is associated with the rate of native protein formation, increased for the refolding of C8S, while C8A, L6A, and L10A showed smaller but systematic increases in the value of tau(1.)For both C8S and C8A, the value of the step associated with formation of the intermediate, tau(2), was independent of denaturant concentration. In addition, mutations in the hydrophobic core (L10A, C8A, C8S, and L6A) and, surprisingly, along the surface (T9G, T9Q, and N7G) alter the stability. The most destabilizing mutations show changes in equilibrium unfolding cooperativity, which is atypical for destabilizing mutations in IL-1 beta. Crystallographic studies indicate that mutations along strand 1 may alter the number of ordered water molecules within the core. Thus, side-chain replacement in this region can disrupt essential main-chain interactions mediated by ordered water contacts in a highly cooperative network of hydrogen bonding.

Flow Injection Analysis↗
PubMed2000

Kinetics: a tool to study molecular motors.

Molecular motors are enzymes that couple the energy from nucleoside triphosphate hydrolysis to movement along a filament lattice. The three cytoskeletal motor superfamilies include myosin, dynein, and kinesin. However, in the last decade it has become apparent that the nucleic acid-based enzymes (DNA and RNA polymerases as well as the DNA helicases) share a number of mechanistic features in common with the microtubule and actin motors despite the fact that their cellular functions are so different. This review addresses the mechanistic approaches that have been used to study molecular motors. We discuss the basic biochemical techniques used to characterize a protein preparation, including active site determination and steady-state kinetics. In addition, we present the transient-state kinetic approaches used to define a mechanochemical cycle. We attempt to integrate the information obtained from kinetic studies within the context of motility results to provide a better understanding of the contribution of each approach for dissecting unidirectional force generation.

Adenosine Triphosphate↗
PubMed2005

The investigation of cerebrospinal fluid formation by ventriculo-aqueductal perfusion method in cats.

OBJECTIVES: The perfusion of cerebrospinal fluid (CSF) spaces by artificial CSF (aCSF) containing an indicator, is an indirect method used to calculate CSF formation. To evaluate this method, we have developed a ventriculo-aqueductal perfusion method, which enables a direct measurement of CSF formation in the ventricles. METHODS: In chloralose anaesthetized cats, the aqueduct of Sylvius was cannulated so that the outflow end of the plastic cannula was positioned extracranially. Both lateral ventricles were also cannulated, with one cannula for infusion of aCSF containing blue dextrane and the other for measurement of CSF pressure. RESULTS: During ventriculo-aqueductal perfusion (direct method) under physiological CSF pressure, the outflow rate from aqueductal cannula did not differ significantly from the inflow rate, i.e. no CSF formation was observed. When the indirect method based on dilution of blue dextran in the outflowing perfusate was used, the formation of approximately 5 microl/min of CSF was obtained. CONCLUSION: Results of the direct method indicate that net CSF formation inside brain ventricles does not exist. The opposite results obtained by the indirect method questions this method as a reliable study of CSF formation.

Animals↗
PubMed2001

Determination of low cadmium concentrations in wine by on-line preconcentration in a knotted reactor coupled to an inductively coupled plasma optical emission spectrometer with ultrasonic nebulization.

An on-line cadmium preconcentration and determination system implemented with inductively coupled plasma optical emission spectrometry (ICP-OES) associated to flow injection (FI) with ultrasonic nebulization system (USN) was studied. The cadmium was retained as the cadmium-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol, Cd-(5-Br-PADAP), complex, at pH 9.5. The cadmium complex was removed from the knotted reactor (KR) with 3.0 mol/L nitric acid. A total enhancement factor of 216 was obtained with respect to ICP-OES using pneumatic nebulization (12 for USN and 18 for KR) with a preconcentration time of 60 s. The value of the detection limit for the preconcentration of 5 mL of sample solution was 5 ng/L. The precision for 10 replicate determinations at the 5 microg/L Cd level was 2.9% relative standard deviation (RSD), calculated from the peak heights obtained. The calibration graph using the preconcentration system for cadmium was linear with a correlation coefficient of 0.9998 at levels near the detection limits up to at least 1,000 microg/L. The method was successfully applied to the determination of cadmium in wine samples.

Cadmium↗
PubMed2001

A novel chemiluminescent method for the determination of salicylic acid in bactericidal solutions.

A new flow-injection procedure has been developed for the determination of salicylic acid based on the enhancement of the chemiluminescence from the cerium(IV)-Tween 20 reaction by salicylic acid in acidic medium. The method is simple, selective and sensitive with a detection limit of 2.5x10(-9) g mL(-1). It is applicable to the determination of salicylic acid in the concentration range of 4.0x10(-9)-1.1x10(-6) g mL(-1). The relative standard deviation (RSD) is 0.85% for 4.0x10(-7) g mL(-1) salicylic acid (n=11). The method has been successfully applied to the determination of salicylic acid in bactericidal solutions. Furthermore, it is suggested that light emission from cerium(IV)-Tween 20 reaction is probably because of the formation of singlet oxygen 1O2* and the emitter is excited oxygen molecular pairs O2(1delta(g))O2(1sigma(g)-).

Anti-Bacterial Agents↗
PubMed2002

A new split-flow injector for preparative liquid chromatography columns. Annular injection system.

The packing of large-diameter columns for liquid chromatography is still difficult and numerous publications have reported results from tests which prove the packing is heterogeneous. The slurry is more compact in the wall region and this reduces the flow of the mobile phase, leading to distortion of the sample zone in the column and generation of peak tailing. A new type of injection system for the head of the column has been developed which divides the flow of the solvent from the pump into two parts. One, without sample, is directed to a crown injector, close to the wall. By adjusting the ratio of this flow to that of the bulk flow it is possible to increase the speed of the mobile phase in this part of the stationary phase and reduce distortion of the sample zone. The other part of the solvent carries the sample to the stationary phase through a distributor. The results demonstrate the benefits of this annular injection system, which include increased efficiency and improved column stability.

Chromatography, High Pressure Liquid↗
PubMed2002

Flow-injection amperometric determination of pesticides on the basis of their inhibition of immobilized acetylcholinesterases of different origin.

Determination of the organophosphorus pesticides paraoxon, chlorpyrifos oxon, and malaoxon has been performed by a method based on inhibition of acetylcholinesterase (AChE) and amperometric detection in a flow-injection system with enzymes obtained from the electric eel (eeAChE) and Drosophila melanogaster (dmAChE) and immobilized on the surface of platinum electrode within a layer of poly(vinyl alcohol) bearing styrylpyridinium groups. dmAChE is more sensitive than eeAChE to inhibition by chlorpyrifos oxon and paraoxon. The sensitivity difference was largest for chlorpyrifos oxon (detection limit approx. 17 times lower), and practically none for malaoxon. Determination of the analytes in spiked river water samples by use of the dmAChE biosensor resulted in recoveries from 50 to 90 % for chlorpyrifos oxon at levels of 20 to 40 nmol L(-1), 50 to 100 % for paraoxon at 0.6 to 0.8 micro mol L(-1), and 140 to 190 % for malaoxon at 0.6 to 1.2 micro mol L(-1).

Acetylcholinesterase↗
PubMed2002

Determination of trace bismuth by flow injection-hydride generation collection-atomic absorption spectrometry.

Bismuth hydride gas was collected on-line and determined via a new flow injection-hydride generation collection-flame atomic absorption spectrometry system. The performance of the gas-liquid separator, hydride gas collection time, acidity of the sample solution, NaBH(4) concentration, and the effects of concomitant interferents were investigated to optimize the conditions of this new method. Interferences from concomitant elements were investigated, and recoveries of 94.7-105.3% for 10 ng mL(-1) Bi were obtained after the addition of 0.2% ascorbic acid-thiourea masking reagents. The sensitivity of this new method was one order of magnitude higher than the continuous flow-hydride generation-flame atomic absorption method with a detection limit of 0.25 ng mL(-1) and a precision of 2.3%. The method was evaluated by determining trace bismuth in standard biological reference material human hair GBW07601, and the results were consistent with the certified value. The proposed method was then employed to determine trace bismuth in ten colored gelatin samples; recoveries of 94.2-105.8% were obtained.

Bismuth↗
PubMed2002

Sequential spectrophotometric determination of methanol and iron in vinegar by a flow injection-pervaporation method.

An easily automatable sequential flow-injection-pervaporation method is proposed for the photometric determination of methanol and iron in vinegar. The method is based on separation of the methanol from the sample matrix by pervaporation followed by its oxidation to formaldehyde with permanganate, decolouration of the latter with S(2)O(5)(2-), and subsequent reaction of formaldehyde with p-rosaniline to yield a violet reaction product with maximum absorption at 567 nm. Iron is determined by an existing method based on reaction with thiocyanate in acidic medium and monitoring at 508 nm. After optimisation by either the univariate or multivariate approaches, as required, the linear range was established for methanol (4-1000 mg L(-1)) and iron (0.18-20 mg L(-1)). The proposed method was then compared with reference methods for methanol and iron in terms of repeatability (2.452 mg L(-1) and 0.245 mg L(-1), respectively), reproducibility (4.435 mg L(-1) and 0.356 mg L(-1), respectively), detection limit (LOD=82 and 0.234 mg L(-1), respectively), and traceability. The throughput was nine samples per hour.

Acetic Acid↗
PubMed2002

An on-line potentiometric sequential injection titration process analyser for the determination of acetic acid.

An on-line potentiometric sequential injection titration process analyser for the determination of acetic acid is proposed. A solution of 0.1 mol L(-1) sodium chloride is used as carrier. Titration is achieved by aspirating acetic acid samples between two strong base-zone volumes into a holding coil and by channelling the stack of well-defined zones with flow reversal through a reaction coil to a potentiometric sensor where the peak widths were measured. A linear relationship between peak width and logarithm of the acid concentration was obtained in the range 1-9 g/100 mL. Vinegar samples were analysed without any sample pre-treatment. The method has a relative standard deviation of 0.4% with a sample frequency of 28 samples per hour. The results revealed good agreement between the proposed sequential injection and an automated batch titration method.

Acetic Acid↗
PubMed2002

Reagent injection FIA system for lead determination by hydride generation - quartz-tube atomic absorption spectrometry.

A method is proposed for the determination of lead by generation of its hydride and detection by quartz-tube AAS using a reagent injection FIA system based on the injection of sodium tetrahydroborate. Lead hydride generation was carried out using a combination of 0.5 M nitric acid, 10% m/ v hydrogen peroxide and 10% m/ v sodium tetrahydroborate. The characteristic concentration obtained was 3.1 ng mL(-1) and the detection limit was 2.6 ng mL(-1) for an injected volume of 0.125 mL of tetrahydroborate.

Borohydrides↗
PubMed2002

Flow injection determination of papaverine based on its sensitizing effect on the chemiluminescence reaction of permanganate-sulfite.

A novel chemiluminescence (CL) method for the determination of papaverine (PAP) has been developed by combining the flow injection technique and its sensitizing effect on the weak CL reaction between sulfite and acidic permanganate. A mechanism for the CL reaction has been proposed on the basis of fluorescent and chemiluminescence spectra. The CL response is proportional to the concentration of PAP over the range 0.2-10 micro mol L(-1). The detection limit of PAP is 0.10 micro mol L(-1) (3 s) with a relative standard deviation (RSD) of 2.0% for 10 repetitive determinations of 1.0 micro mol L(-1) PAP. Interferences from other alkaloids in the opium, such as morphine and codeine, are negligible except that of narcotine. The method has been satisfactorily used for the determination of PAP in injections and compound liquorice tablets.

Flow Injection Analysis↗
PubMed2003

Spectrofluorimetric determination of formaldehyde by a flow-injection method based on its catalytic effect on the acridine yellow-bromate reaction.

A flow-injection configuration for the determination of formaldehyde is proposed. The method is based on the enhancing effect of formaldehyde on the oxidation of acridine yellow by bromate in acidic medium. The proposed procedure is simple, inexpensive, sensitive and suitable for concentrations of formaldehyde between 1 and 56 microg mL(-1). A sampling-rate of 60 samples h(-1) was achieved. The effect of several organic and inorganic species was studied. The method was applied to the determination of formaldehyde in pharmaceuticals, milk and air in work environments. The accuracy of the method was confirmed by comparing the results with those obtained using the standard acetylacetone method.

Air Pollutants↗