Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Environmental Protection Agency”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78Linked to original sources
PubMed2007

Quantitative determination of organic priority pollutants in the composts of sewage sludge with rice straw by gas chromatography coupled with mass spectrometry.

In order to investigate the occurrence and distribution of organic contaminants in the compost of sewage sludge with rice straw, four different composting treatments at a low carbon/nitrogen (C/N) ratio (13:1) were conducted. Thirty semi-volatile organic compounds (SVOCs) listed as priority pollutants by both China and the US Environmental Protection Agency (EPA) were Soxhlet-extracted, separated and analyzed by gas chromatography coupled with mass spectrometry (GC-MS). The results showed that after composting (56 days) most of SVOCs were detected in the final composts. The total concentrations of polycyclic aromatic hydrocarbons (PAHs) and phthalic acid esters ranged from 1.8 to 10 mg/kg dry weight (d.w.) and from 9.8 to 18 mg/kg d.w., respectively, being significantly higher than those of chlorobenzenes and nitroaromatic compounds which were generally less than 1.0 mg/kg d.w. The concentrations and predominant compounds of organic contaminants in the different composts varied, and were affected by their physico-chemical properties and the composting processes. Concentrations of SVOCs in the static aerated composting processes especially intermittently aerated composting treatment were considerably lower than those in the manual-turned composting treatments. Concentrations of organic contaminants especially PAHs and di(2-ethylhexyl) phthalate in the final composts were in agreement with the maximum permissible limits for agricultural purposes proposed by the European Union and by the EPA.

Chlorobenzenes↗
PubMed2004

Photomutagenicity of 16 polycyclic aromatic hydrocarbons from the US EPA priority pollutant list.

The photomutagenicity of 16 polycyclic aromatic hydrocarbons (PAHs), all on the United States Environmental Protection Agency (US EPA) priority pollutant list, was studied. Concomitant exposing the Salmonella typhimurium bacteria strain TA102 to one of the PAHs and light (1.1 J/cm2 UVA+2.1 J/cm2 visible) without the activation enzyme S9, strong photomutagenic response is observed for anthracene, benz[a]anthracene, benzo[ghi]perylene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene, and pyrene. Under the same conditions, acenaphthene, acenaphthylene, benzo[k]fluoranthene, chrysene, and fluorene are weakly photomutagenic. Benzo[b]fluoranthene, fluoranthene, naphthalene, phenanthrene, and dibenz[a,h]anthracene are not photomutagenic. These results indicate that PAHs can be activated by light and become mutagenic in Salmonella TA102 bacteria. At the same time, the mutagenicity for all the 16 PAHs was examined with the standard mutagenicity test with 10% S9 as the activation system. Benzo[b]fluoranthene, benzo[k]fluoranthene, chrysene, acenaphthylene, and fluorene are weakly mutagenic, while the rest of the PAHs are not. In general, the photomutagenicity of PAHs in TA102 does not correlate with their S9-activated mutagenicity in either TA102 or TA98/TA100 since they involve different activation mechanisms.

Animals↗
PubMed2002

Roadside particulate air pollution in Bangkok.

Airborne fine particles of PM(2.5-10) and PM2.5 in Bangkok, Nonthaburi, and Ayutthaya were measured from December 22, 1998, to March 26, 1999, and from November 30, 1999, to December 2, 1999. Almost all the PM10 values in the high-polluted (H) area exceeded the Thailand National Ambient Air Quality Standards (NAAQS) of 120 microg/m3. The low-polluted (L) area showed low PM10 (34-74 microg/m3 in the daytime and 54-89 microg/m3 at night). PM2.5 in the H area varied between 82 and 143 microg/m3 in the daytime and between 45 and 146 microg/m3 at night. In the L area, PM2.5 was quite low both day and night and varied between 24 and 54 microg/m3, lower than the U.S. Environmental Protection Agency (EPA) standard (65 microg/m3). The personal exposure results showed a significantly higher proportion of PM2.5 to PM10 in the H area than in the L area (H = 0.80 +/- 0.08 and L = 0.65 +/- 0.04). Roadside PM10 was measured simultaneously with the Thailand Pollution Control Department (PCD) monitoring station at the same site and at the intersections where police work. The result from dual simultaneous measurements of PM10 showed a good correlation (correlation coefficient: r = 0.93); however, PM levels near the roadside at the intersections were higher than the concentrations at the monitoring station. The relationship between ambient PM level and actual personal exposures was examined. Correlation coefficients between the general ambient outdoors and personal exposure levels were 0.92 for both PM2.5 and PM10. Bangkok air quality data for 1997-2000, including 24-hr average PM10, NO2, SO2, and O3 from eight PCD monitoring stations, were analyzed and validated. The annual arithmetic mean PM10 of the PCD data at the roadside monitoring stations for the last 3 years decreased from 130 to 73 microg/m3, whereas the corresponding levels at the general monitoring stations decreased from 90 to 49 microg/m3. The proportion of days when the level of the 24-hr average PM10 exceeded the NAAQS was between 13 and 26% at roadside stations. PCD data showed PM10 was well correlated with NO2 but not with SO2, suggesting that automobile exhaust is the main source of the particulate air pollution. The results obtained from the simultaneous measurement of PM2.5 and PM10 indicate the potential environmental health hazard of fine particles. In conclusion, Bangkok traffic police were exposed to high levels of automobile-derived particulate air pollution.

Air Pollutants↗
PubMed2005

Estimations of copper roof runoff rates in the United States.

Copper (Cu) concentrations in waterways of the United States are of widespread concern. Presently, 692 waterway segments around the United States are listed by the U.S. Environmental Protection Agency (USEPA) as having unacceptably high copper concentrations. As part of their water quality management strategy, the USEPA is mandated to understand and manage sources and impacts of nonpoint releases of chemicals of concern. One potential nonpoint source of Cu is the runoff of precipitation falling onto Cu used in external architecture (e.g., roofing). However, few studies of Cu roof runoff have been published. This article is intended to provide estimations of Cu runoff rates and concentrations across the United States. Copper runoff rates and concentrations are predicted at 179 locations with a recently developed model. The average and range (in parentheses) of annual Cu loading rates, based on roof area; Cu export rates, based on amount of precipitation; and Cu concentrations for the United States are 2.12 (1.05-4.85) g Cu/m2/y; 2.72 (0.69-16.48) mg Cu/m2/ mm; and 2.72 (0.69-16.48) mg Cu/L as total Cu, respectively. Statistics are presented that describe site-specific data distributions for use in probabilistic exposure and risk assessments. The effects of air quality as well as the potential fate and risks of Cu from roof runoff are discussed.

Copper↗
PubMed2002

A child with chronic manganese exposure from drinking water.

The patient's family bought a home in a suburb, but the proximity of the house to wetlands and its distance from the town water main prohibited connecting the house to town water. The family had a well drilled and they drank the well water for 5 years, despite the fact that the water was turbid, had a metallic taste, and left an orange-brown residue on clothes, dishes, and appliances. When the water was tested after 5 years of residential use, the manganese concentration was elevated (1.21 ppm; U.S. Environmental Protection Agency reference, < 0.05 ppm). The family's 10-year-old son had elevated manganese concentrations in whole blood, urine, and hair. The blood manganese level of his brother was normal, but his hair manganese level was elevated. The patient, the 10-year-old, was in the fifth grade and had no history of learning problems; however, teachers had noticed his inattentiveness and lack of focus in the classroom. Our results of cognitive testing were normal, but tests of memory revealed a markedly below-average performance: the patient's general memory index was at the 13th percentile, his verbal memory at the 19th percentile, his visual memory at the 14th percentile, and his learning index at the 19th percentile. The patient's free recall and cued recall tests were all 0.5-1.5 standard deviations (1 SD = 16th percentile) below normal. Psychometric testing scores showed normal IQ but unexpectedly poor verbal and visual memory. These findings are consistent with the known toxic effects of manganese, although a causal relationship cannot necessarily be inferred.

Attention Deficit Disorder with Hyperactivity↗
PubMed1995

Bench-scale testing of selected remediation alternatives for contaminated sediments.

The Assessment and Remediation of Contaminated Sediments (ARCS) Program within the U.S. Environmental Protection Agency's Great Lakes National Program Office (GLNPO) contained a component for demonstrating and evaluating sediment remediation technologies. Toward this end, bench-scale tests of solvent extraction, thermal desorption, and wet air oxidation technologies were conducted. Contaminated sediments were tested from the Grand Calumet River, Indiana; Buffalo River, New York; Saginaw River, Michigan; and Ashtabula River, Ohio. The primary contaminants of concern in these sediments were polychlorinated biphenyls (PCBs) and polynuclear aromatic hydrocarbons (PAHs). The solvent extraction tests were conducted with sediments from the Grand Calumet, Buffalo, and Saginaw rivers. The thermal desorption studies were conducted with sediments from the Grand Calumet, Buffalo, and Ashtabula rivers. The wet air oxidation testing was performed with the Grand Calumet River sediment. Raw sediment contaminant concentrations ranged from 0.32-21.9 mg/kg dry mass for PCBs and 2.70-266 mg/kg dry mass for PAHs. PCB removal or destruction efficiencies ranged from approximately 6-99%. PAH removal or destruction efficiencies ranged from 65-99%. Mass balance closures ranged from 40-99% for solids; 59-139% for water; 29-3500% for oil; 16-129% for PCBs; and 69-3170% for PAHs.

Environmental Pollutants↗
PubMed2002

An evaluation of the tapered element oscillating microbalance method for measuring diesel particulate emissions.

We determined the usefulness of tapered element oscillating microbalances (TEOMs) for researchers and engineers involved with measuring diesel particulate mass. Two different test facilities were used for generating diesel particulates and comparing the TEOM to the commonly used U.S. Environmental Protection Agency (EPA) manual filter method. The EPA method is very labor-intensive and requires long periods of time to complete. The TEOM is an attractive approach because it has the potential to reduce the amount of time and labor required in diesel testing, as well as to provide real-time particulate-mass data that are not obtainable with the EPA method. It was found that the TEOM was a precise and easy-to-operate instrument that could measure the mass concentration (MC) of diesel particulate emissions in real time. Although the TEOM diesel particulate MC measurements were highly correlated with the manual filter measurements, the two techniques were not equivalent because the TEOM consistently reported MC results that were 20-25% lower than those obtained using the manual filter technique. In conclusion, the TEOM can be used to increase test-cell throughput and to measure transient values of diesel particulate emissions at sites performing diesel-engine testing. However, unless EPA is able to certify the TEOM as an equivalent method, it cannot replace the manual filter method for diesel certification work.

Environmental Monitoring↗
PubMedDate not supplied

Toxicological characterisation of sludge from sewage treatment plants using toxicity identification evaluation protocols based on in vitro toxicity tests.

The ecotoxicological characterisation of complex mixtures, such as sludge from sewage treatment plants, is complex. Toxicity identification evaluation (TIE) protocols, developed by the United States Environmental Protection Agency (US EPA); to identify toxic pollutants in complex effluents, are useful tools in this context; to solve the difficulties in assessing unknown organic pollutants by analytical methods, the usefulness of bioassays to detect the relevant (toxic) organic compounds present in complex samples, and the possibilities of in vitro cytotoxicity tests as screening tools, offers a profitable combination. The sludge obtained from a sewage treatment plant was extracted by acetonitrile using a microwave extractor and fractionated in an HPLC system. The toxicity of every fraction was assayed using a RTG-2 cytotoxicty test, based on the fibroblastic RTG-2 fish cell line (ATCC, CCL N. 55). At exponential growth, three endpoints, beta-galactosidase activity, culture viability assayed by the neutral red assay (NR) and inhibition of growth rate using the FRAME KB protein assay (KBP), were used. By plotting the toxicity of each fraction vs elution time, the corresponding "toxicograms" were built. The UV and fluorescence chromatograms are compared to the three toxicograms (one for each toxicity endpoint).

Animal Testing Alternatives↗
PubMed2001

Potentiometric polymeric membrane electrodes for measurement of environmental samples at trace levels: new requirements for selectivities and measuring protocols, and comparison with ICPMS.

It is here established that potentiometric polymeric membrane electrodes based on electrically neutral ionophores are useful analytical tools for heavy metal ion determinations in drinking water at nanomolar total concentrations. This means that they can compete with the most sophisticated techniques of instrumental analysis. With optimized ion-selective membranes based on the lead-selective ionophore 4-tert-butylcalix[4]arenetetrakis(thioacetic acid dimethylamide) as model example, a number of native and spiked drinking water samples are potentiometrically assessed for lead, and the results compared with ICPMS measurements. The goal of this work is to demonstrate that detection limits in real world samples are routinely achieved that are, with 1.5 ppb, at least 10-fold lower than the lead action limit imposed by the U.S. Environmental Protection Agency (15 ppb). In contrast to earlier reports, different conditioning and measuring protocols are followed, and membranes and inner filling solution of optimized composition are used. The sensors are shown to be useful for the speciation analysis of lead in water as well. Typical water samples are acidified to pH 4 to assess total lead rather than free, uncomplexed lead. For lead concentrations above 2 ppb, the values compare very well with ICPMS. Main interferences are found to be H+ and Cu2+, although Cu2+ only shows significant interference at levels around or above its own action limit (1.3 ppm), in which case the water sample would anyway show quality problems. An explicit, simplified flux model targeted to the practical use of these sensors explains the extent of expected interference. Sensors are shown to require a higher selectivity than predicted by models not considering ion fluxes, since in dilute samples, the counterdiffusion flux of lead from the membrane into the sample becomes potential determining. The model and experiments shown here are a foundation for future trace level applications of potentiometric polymeric membrane electrodes.

Algorithms↗
PubMed2005

Identification of a homogentisate-1,2-dioxygenase gene in the fungus Exophiala lecanii-corni: analysis and implications.

Exophiala lecanii-corni is a dimorphic fungus capable of degrading several volatile organic compounds (VOCs) including ethylbenzene, which has been classified as a hazardous air pollutant by the Environmental Protection Agency. In contrast to bacterial species, little is known about the mechanisms of fungal degradation of VOCs. The results described herein suggest a potential pathway for ethylbenzene degradation in E. lecanii-corni via styrene, phenylacetate and homogentisate. Consistent with this proposed pathway, a full-length homogentisate-1,2-dioxygenase gene (ElHDO) has been identified, cloned and sequenced. The nucleotide sequence of ElHDO consists of a 1,452-bp open reading frame encoding a protein with 484 amino acids. The expression of the gene product increases when grown on ethylbenzene, further suggesting that it could be involved in ethylbenzene degradation and may be responsible for the aromatic ring cleavage reaction. In addition, a 907-bp fragment isolated upstream from this gene shares 78% sequence identity at the amino acid level with the amino acid sequences of two fungal phenylacetate hydroxylase genes. This observation suggests that the genes responsible for ethylbenzene degradation may be clustered. This research constitutes the first step towards a better understanding of ethylbenzene degradation in E. lecanii-corni.

Amino Acid Sequence↗
PubMed2006

Dermal insecticide residues from birds inhabiting an orchard.

The US Environmental Protection Agency conducts risk assessments of insecticide applications to wild birds using a model that is limited to the dietary route of exposure. However, free-flying birds are also exposed to insecticides via the inhalation and dermal routes. We measured azinphos-methyl residues on the skin plus feathers and the feet of brown-headed cowbirds (Molothrus ater) in order to quantify dermal exposure to songbirds that entered and inhabited an apple (Malus x domestica) orchard following an insecticide application. Exposure to azinphos-methyl was measured by sampling birds from an aviary that was built around an apple tree. Birds sampled at 36 h and 7-day post-application were placed in the aviary within 1 h after the application whereas birds exposed for 3 days were released into the aviary 4-day post-application. Residues on vegetation and soil were also measured. Azinphos-methyl residues were detected from the skin plus feathers and the feet from all exposure periods. Our results underscore the importance of incorporating dermal exposure into avian pesticide risk assessments.

Animals↗
PubMedDate not supplied

Spatial and temporal measurements of NO2 in an urban area using continuous mobile monitoring and passive samplers.

This paper describes the use of a continuous mobile monitor and passive samplers to estimate the spatial distribution of NO2 in an urban area for the purpose of siting a continuous monitor to measure population exposure. Monitoring sites were sites selected based on the State and Local Air Monitoring Stations (SLAMS) and National Air Monitoring Station (NAMS) siting criteria required by the U.S. Environmental Protection Agency (U.S. EPA). SLAMS monitoring objectives define scales in which the NO2 concentration and land use are homogeneous. The SLAMS scales relevant to NO2 monitoring for NAMS NO2 monitoring sites are neighborhood (0.5 to 4 km), and urban (several to 50 km). SLAMS siting objectives also define four categories of sites: highest concentration, representative concentration, impacts of major sources, and background sites. Mobile monitoring with a Scintrex LMA-3 luminal monitor was used on a neighborhood scale to measure the NO2 concentration at sites that covered a large geographical area. Passive samplers were then located at candidate mobile monitoring locations for long-term sampling which covered the neighborhood to the urban scale. These two methods complement each other by combining short-term continuous measurements and integrated long-term measurements which reflect the National Ambient Air Quality Standard for NO2 which is based on an annual average. The neighborhood site with the highest concentration was not only in the area of highest population density, but was also representative of the larger urban scale. The magnitude of this urban scale is approximately 20 km.

Air Pollutants↗
PubMed2004

Interlaboratory comparison of a reduced volume marine sediment toxicity test method using the amphipod Ampelisca abdita.

The U.S. Environmental Protection Agency has standardized methods for performing acute marine amphipod sediment toxicity tests. A test design reducing sediment volume from 200 to 50 ml and overlying water from 600 to 150 ml was recently proposed. An interlaboratory comparison was conducted to evaluate the precision of this reduced sediment volume toxicity test method using the marine amphipod Ampelisca abdita. A negative control and three sediment samples of varying degrees of toxicity ranging from low to high were tested by six laboratories. Complete agreement was reached in rank of relative toxicity for all samples tested by five out of six laboratories. Test acceptability for control survival was achieved by all laboratories, and 69% agreement in classification of the sediments as toxic or nontoxic was documented. Coefficients of variation in all test samples were similar to those reported in other interlaboratory studies using marine amphipods. Results of this study indicate that the reduced sediment volume test using A. abdita is a reliable and precise measure of acute toxicity in marine sediment samples.

Amphipoda↗
PubMed2000

Feasibility of assessing dermal exposure to PAHs of workers on gaswork sites--the SOLEX study.

Population exposure to pollutants in soil is an important public health concern. Difficult to measure, it is usually estimated using multimedia models. Modeling data predict that the skin surface is a predominant exposure route in roughly 15% of the US Superfund sites. Nonetheless, no study has confirmed these predictions. The SOLEX study was an opportunity to study the feasibility of estimating the cutaneous polycyclic aromatic hydrocarbons (PAHs: all 16 of the United States Environmental Protection Agency list) load of workers at three former manufactured gas sites, one of those being under remediation. Over two measurement periods (November 1997 and June 1998), 30 and 28 volunteers, respectively, were equipped for a single day work with five pads that collected soil particles and were placed at the neck, shoulder, wrist, groin, and ankle. Pad contamination was observed for six of the nine workers on the site being remediated but not on other sites. The wrist pad was most often affected, followed by the neck pad, these are, the exposed regions of the body. The PAHs most frequently identified were anthracene, fluoranthene, naphthalene, phenanthrene, and pyrene, at concentrations relatively high. In conclusion, this study showed that estimating skin exposure to soil pollutants is feasible. Secondly, it suggested that only subjects in close contact with the soil had a detectable exposure to PAHs. Extension of this approach to other exposure settings is warranted, especially among children playing in polluted public or private gardens, because their games lead to frequent contact with the soil.

Administration, Cutaneous↗
PubMed2002

Effects of n-hexadecane and PM-100 clay on trichloroethylene degradation by Burkholderia cepacia.

Trichloroethylene (TCE) is a non-flammable, volatile organochlorine compound which was a widely used degreasing agent, anesthetic, and coolant prior to 1960, but has since been placed on the Environmental Protection Agency's (EPA) list of priority pollutants. The inadequate disposal practices for TCE have created numerous TCE-contaminated superfund sites. The most commonly employed practice for remediating TCE-contaminated sites is to purge the contaminant from the source and trap it onto an adsorbent which is disposed of in a landfill or by incineration. This investigation was undertaken to evaluate the effectiveness of Burkholderia cepacia strain G4 (G4) to regenerate used sorbents by degrading TCE from the sorbent directly or indirectly. The results of this investigation showed that G4 was capable of reducing TCE attached to PM-100 clay but at significantly reduced rate due to the slow desorption rate. Conversely, it was shown that G4 was capable of degrading TCE dissolved in n-hexadecane at the same rate as systems without n-hexadecane present. The reduction in TCE degradation when the TCE is attached to the PM-100 clay could be overcome by solvent rinsing the TCE from the clay with subsequent removal of the TCE from the n-hexadecane by G4.

Aluminum Silicates↗
PubMed2002

Pacific steelhead (Oncorhynchus mykiss) exposed to chlorpyrifos: benchmark concentration estimates for acetylcholinesterase inhibition.

Steelhead trout (Oncorhynchus mykiss) were exposed for 96 h to the organophosphate chlorpyrifos to establish benchmark concentration (BMC) values in the low-effect range of brain acetylcholinesterase (AChE) inhibition. The U.S. Environmental Protection Agency (U.S. EPA) benchmark dose software was used to model the data. Benchmark concentrations were determined for a range of inhibition levels at 5, 10, and 20%, at 1 and 2 control standard deviations (SD), and at an experimental limit-of-detection level of 2.5%. One contributing difficulty in establishing precise inhibition BMCs in the lower effect region is the variability associated with the AChE analytical method. To minimize this variability, the Ellman method was modified specifically for analysis of O. mykiss brain tissue. Laboratory-established BMCs for chlorpyrifos were then compared with the U.S. EPA 96-h water quality criteria and with the concentration levels detected in Northwest surface waters that are home to threatened steelhead trout. The U.S. EPA 96-h water quality criteria of 0.083 microg/L is below the BMC(02.5), the limit-of-detection value for this study. The average chlorpyrifos concentration detected during a two-week period in one monitored stream was 0.127 microg/L, which approaches the BMC(02.5). The peak chlorpyrifos concentration detected at 0.482 microg/L is near the BMC(1SD) estimate.

Acetylcholinesterase↗
PubMedDate not supplied

Solvent extraction and tandem dechlorination for decontamination of soil.

The United States Environmental Protection Agency (US EPA) guidelines allow removal of polychlorinated biphenyls (PCBs) from soils via solvent extraction. This option holds promise for removal of other recalcitrant organic contaminants as well. A study was undertaken to evaluate the effectiveness of solvent extraction with two tandem degradation techniques. The degradation techniques were chemical dehalogenation with immobilized reagents and gamma-ray irradiation. The integrated approach was evaluated with contaminated soils from wood treatment and electric power substation sites. Evaluations were carried out on a bench scale in the laboratory and on a semi-pilot scale at a contaminated site. Binary solvent mixture of alkanes and alcohols yielded the highest extraction efficiencies. Extraction efficiencies in excess of 90% were obtained for PCBs, polychlorinated dibenzo-p-dioxins (PCDDs) and polynuclear aromatic hydrocarbons (PAHs). Extracted PCBs were rapidly degraded through chemical dehalogenation or with high doses of the gamma-ray irradiation. The residual organics in the solvent mixture were removed with activated carbon, and the solvent was recycled for subsequent soil extractions. Contaminants adsorbed on the activated carbon were destroyed with a counter flow oxidation process.

Carbon↗
PubMed2005

Seasonal fluctuation in heavy metal pollution in Iran's Siahroud River. A preliminary study.

BACKGROUND: The management of its available water resources has become a key issue for Iran. During the last few decades, the water quality of Siahroud River in the coastal plain of the Caspian Sea in Gilan Province in Northern Iran has significantly degraded. The scarcity of water has been compounded by rapid population growth and increasing pollution from fertilizers, pesticides, and municipal and industrial wastes. One of the sources of this degradation is the movement of heavy metals from the river's watershed into the various water systems supported by the river, including the water system for Rasht City. METHODS: To study the magnitude of heavy metal pollution in the Siahroud River, seven heavy metals including Zn, Cu, Pb, Cd, Mn, Fe, and Ni were measured in duplicate from replicated water samples collected over five consecutive seasons and analyzed by Atomic Absorption Spectrometry. In situ measurements of pH were taken with the samples and total organic carbon (TOC) was analyzed by IR gas measurement. RESULTS: The results demonstrated that four of the seven heavy metals including Pb, Fe, Cd, and Mn exceeded permissible safe levels as established by the United States Environmental Protection Agency. Multivariate factor analysis suggested that industrial land-use was the main contributing factor for the high levels of Fe and Mn in the Siahroud River, whereas, Cd was principly from agricultural activities in the watershed. The data also suggested that pH and TOC had an important role in the behaviour of Pb and Mn, and that the elevated levels of these two heavy metals in Siahroud River was the consequence of other anthropogenic sources. Only negligible levels of Zn, Cu and Ni were detected. Finally, all the sampling stations were subjected to cluster analysis. The results indicated that three different zones could be distinguished according to the levels of pollution. In addition, it was shown that the urban areas did not have a significant impact on the heavy metal pollution in the river. This observation stems from the fact that the data from the sampling stations before and after Rasht City were not significantly different. RECOMMENDATIONS: Preventive measures need to be undertaken in the land-use systems and watersheds of the Siahroud River to reduce the pollution levels of Pb, Cd, Mn and Fe.Cd, Mn and Fe.

Cities↗