Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Chromium Compounds”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78Linked to original sources
PubMed2004

Gravitational effects on the weld pool shape and microstructural evolution during gas tungsten arc and laser beam welding of 304 stainless steel and Al-4 wt% Cu alloy.

Effects of gravitational acceleration were investigated on the weld pool shape and microstructural evolution for 304 stainless steel and Al-4wt% Cu alloy. Effects of welding heat source were investigated by using laser beam welding (LBW) and gas tungsten arc welding (GTAW). As the gravitational level was increased from low gravity (LG approximately 1.2 g) to high gravity (HG approximately 1.8 g) using a NASA KC-135 aircraft, the weld pool shape for 304 stainless steel was influenced considerably during GTAW. However, insignificant change in the microstructure and solute distribution was observed at gravitational levels between LG and HG. The GTAW on Al-4 wt% Cu alloy was used to investigate the effect of gravitational orientation on the weld solidification behavior. Gravitational orientation was manipulated by varying the welding direction with respect to gravity vector; that is, by welding upward opposing gravity ( ||-U) and downward with gravity ( ||-D) on a vertical weld piece and welding perpendicular to gravity (perpendicular) on a horizontal weld piece. Under the same welding conditions, a larger primary dendrite spacing in the ||-U weld was observed near the weld pool surface and the fusion boundary than in the case of perpendicular or ||-D welds. The ||-D weld exhibited different solidification morphology and abnormal S shape of solidification rate curve during its growth. For 304 stainless steel GTAW, significant effects of gravitational orientation were observed on the weld pool shape that was associated with weld surface morphology and convection flow. However, the weld pool shape for LBW was mostly constant with respect to the gravitational orientation.

Alloys↗
PubMed2005

Bioproduction of ferric sulfate used during heavy metals removal from sewage sludge.

Toxic metals removal from wastewater sewage sludge can be achieved through microbial processes involving Acidithiobacillus ferrooxidans. The oxidation of ferrous ions by A. ferrooxidans, cultured in sewage sludge filtrate, was studied in both batch and continuous flow stirred tank reactors. Sewage sludge filtrate containing natural nutrients (phosphorus and nitrogen) was recovered as effluent following the dehydration of a primary and secondary sludge mixture. Batch and continuous flow stirred tank reactor tests demonstrated that A. ferrooxidans were able to grow and completely oxidize ferrous iron in a culture medium containing more than 80% (v v(-1)) sewage sludge filtrate with 10 g Fe(II) L(-1) added. Toxic levels were reached when total organic carbon in the sewage sludge filtrate exceeded 250 mg L(-1). The ferric iron solution produced in the sludge filtrate by A. ferrooxidans was used to solubilize heavy metals in primary and secondary sludge. The solubilization of Cu, Cr, and Zn yielded 71, 49, and 80%, respectively. This is comparable with the yield percentages obtained using a FeCl(3) solution. The cost of treating wastewater sewage sludge by bioproducing a ferric ion solution from sewage sludge is three times less expensive than the conventional method requiring a commercial ferric chloride solution.

Acidithiobacillus↗
PubMed2000

Gene delivery to in situ veins: differential effects of adenovirus and adeno-associated viral vectors.

PURPOSE: Gene transfer offers the potential to modify vein graft biology at the time of surgical implantation. Efficiency of gene delivery, stability of expression, and host responses are critical parameters for candidate vectors. We compared the effects of intraluminal exposure with adenovirus (AD) and adeno-associated virus (AAV) vectors on transgene expression and monocyte adhesion (MA) in treated vein segments. METHODS: Adult New Zealand white rabbits (N = 51) were anesthetized, and the jugular veins were cannulated bilaterally. Veins were gently distended with either vector (2.10(8) to 1.10(10) infective particles/mL) or vehicle (control) for 30 minutes, after which venous flow was restored. AD and AAV vectors encoding for the marker genes beta-galactosidase (LacZ) and green fluorescent protein (GFP) were used. Vessels were explanted 2 to 40 days postinfection for analysis of gene expression (X-gal staining, reverse transcriptase-polymerase chain reaction), MA, and immunohistochemistry. Ex vivo adhesion assays used (51)Cr-labeled THP-1 cells. Statistical significance was tested by using analysis of variance with a P value less than.05. RESULTS: All animals survived, and all treated veins were patent at sacrifice. Intraluminal exposure to AD at a titer of 1.10(9) resulted in near complete transduction of the endothelium at 2 days, with no detectable expression by day 14. At an equal titer of infectious particles, transgene expression was markedly less for AAV at 2 to 7 days, but improved at 2 weeks and persisted to 40 days. MA was significantly increased 2 days after AD exposure (2.7-fold vs control, *P <.002); AAV treatment had no discernible effect on MA. CONCLUSION: AD-mediated gene transfer to vein segments resulted in robust, transient gene expression that disappeared after 2 weeks. In comparison, AAV-mediated gene delivery was less efficient, but resulted in delayed onset, persistent expression beyond 30 days. AD exposure induced an early increase in MA to the vein surface that was not seen with AAV treatment. Current generations of both AD and AAV vectors have significant, albeit different, limitations for vascular gene therapy.

Adenoviridae↗
PubMed1996

Isotopic anomalies in extraterrestrial grains.

Isotopic compositions are referred to as anomalous if the isotopic ratios measured cannot be related to the terrestrial (solar) composition of a given element. While small effects close to the resolution of mass spectrometric techniques can have ambiguous origins, the discovery of large isotopic anomalies in inclusions and grains from primitive meteorites suggests that material from distinct sites of stellar nucleosynthesis has been preserved. Refractory inclusions, which are predominantly composed of the refractory oxides of Al, Ca, Ti, and Mg, in chondritic meteorites commonly have excesses in the heaviest isotopes of Ca, Ti, and Cr which are inferred to have been produced in a supernova. Refractory inclusions also contain excess 26Mg from short lived 26Al decay. However, despite the isotopic anomalies indicating the preservation of distinct nucleosynthetic sites, refractory inclusions have been processed in the solar system and are not interstellar grains. Carbon (graphite and diamond) and silicon carbide grains from the same meteorites also have large isotopic anomalies but these phases are not stable in the oxidized solar nebula which suggests that they are presolar and formed in the circumstellar atmospheres of carbon-rich stars. Diamond has a characteristic signature enriched in the lightest and heaviest isotopes of Xe, and graphite shows a wide range in C isotopic compositions. SiC commonly has C and N isotopic signatures which are characteristic of H-burning in the C-N-O cycle in low-mass stars. Heavier elements such as Si, Ti, Xe, Ba, and Nd, carry an isotopic signature of the s-process. A minor population of SiC (known as Grains X, ca. 1%) are distinct in having decay products of short lived isotopes 26Al (now 26Mg), 44Ti (now 44Ca), and 49V (now 49Ti), as well as 28Si excesses which are characteristic of supernova nucleosynthesis. The preservation of these isotopic anomalies allows the examination of detailed nucleosynthetic pathways in stars.

Aluminum↗
PubMed2005

[Studies on the recovery of pharmaceutical drug substances from surfaces made of defined stainless-steel alloys].

Facilities for the manufacturing of pharmaceutical drug substances on the pilot-plant and the industrial scale as well as chemical reactors and vessels used for chemical work-up mainly consist of alloyed stainless steel. The influence of the alloy composition and the surface condition, i.e. of the roughness of the stainless-steel materials, on the adsorption of structurally diverse steroidal substances and, hence, on the quality of the products was studied. In general, stainless-steel alloys with smooth, not so rough surfaces are to be favored as reactor material. However, it was demonstrated in this study that, on account of the weak interaction between active substances and steel materials, mechanically polished materials of a medium roughness up to approx. 0.4 microm can be employed instead of the considerably more cost-intensive electrochemically polished stainless-steel surfaces. The type of surface finishing up to a defined roughness, then, has no influence on the quality of these pharmaceutical products. Substances that, because of their molecular structure, can function as "anions" in the presence of polar solvents, are adsorbed on very smooth surfaces prepared by electrochemical methods, forming an amorphous surface film. For substances with this structural characteristics, the lower-cost mechanically polished reactor materials of a medium roughness up to approx. 0.5 microm should be used exclusively.

Algorithms↗
PubMed1991

[Clinical and hygienic aspects of the effect of antimony ore on workers in the Far North].

The clinical and hygienic studies performed at the antimonite ore extraction mines in Yakutia revealed that the workers were exposed to high concentrations of polymetallic dusts, containing chromium dioxide, antimony, arsenic and their compounds. 11% of the workers exhibited dust bronchitis, changes in the blood and immune reactivity indices which were due to reactions of adaptation to the Far North climatic conditions and the occupational factors' toxic effects.

Air Pollutants, Occupational↗
PubMed1997

Effects of reducing reagents and temperature on conversion of nitrite and nitrate to nitric oxide and detection of NO by chemiluminescence.

To measure the concentration of nitrites and nitrates by chemiluminescence, we examined the efficiency of five reducing agents [V(III), Mo(VI) + Fe(II), NaI, Ti(III), and Cr(III)] to reduce nitrite (NO2-) and (or) nitrate (NO3-) to nitric oxide (NO). The effect of each reducing agent on the conversion of different amounts of NO2- and (or) NO3- (100-500 pmol, representing concentrations of 0.4 to 2 mu molar) to NO was determined at 20 degrees C for NO2- and at 80 degrees C for NO3-. The effect of temperature from 20 to 90 degrees C on the conversion of a fixed amount of NO2- or NO3- (400 pmol or 1.6 mu molar) to NO was also determined. These five reducing agents are similarly efficient for the conversion of NO2- to NO at 20 degrees C. V(III) and Mo(VI) + Fe(II) can completely reduce NO3- to NO at 80 degrees C. NaI and Cr(III) were unable to convert NO3- to NO. Increased temperature facilitated the conversion of NO3- to NO, rather than that of NO2- to NO. We evaluated the recovery of NO2- and NO3- from plasmas of pig and of dog. Recovery from plasma of both animals was reproducible and near quantitative.

Animals↗
PubMed2003

Chromium (III) produces distinct type of cell death in cultured cells.

Chromium acetate hydroxide is a chemical form of trivalent chromium (Cr III) originating from industrial processes. Although considered relatively nontoxic, upon longer treatment intervals it may cause irreversible cellular damage culminating in cell death. In our present work we have attempted to analyze some of the mechanisms whereby this chemical inflicts damage while focusing on the final observed endpoints. We report that 1 mM chromium acetate hydroxide is during weeks lasting treatment capable of injuring the plasma membrane of Hep-2 cells, which in turn becomes permeable to Cr (III) ions. Analyses of several markers of cellular damage; i.e. mitochondrial activity, nuclear integrity and oxidative stress have shown that tested compound interacts directly with subcellular organelles and upon tested concentration and time induces distinct type of cell death bearing features of apoptosis and necrosis.

Apoptosis↗
PubMed1992

Potentiation of sodium chromate(VI)-induced chromosomal aberrations and mutation by vitamin B2 in Chinese hamster V79 cells.

The effect of vitamin B2, which is capable of reducing chromium(VI) to chromium(V), on chromosomal aberrations and mutation caused by Na2CrO4 was investigated in Chinese hamster V79 cells. Pretreatment with 200 microM vitamin B2 (riboflavin) for 24 h prior to exposure to Na2CrO4 (2.5-5 microM) resulted in an increase of metal-induced chromosomal aberrations and mutation at the HGPRT locus. These and other previous studies suggest that vitamin B2 enhances the clastogenic and mutagenic action of chromate compounds, through its ability to directly reduce chromium(VI) in cells.

Animals↗
PubMed1991

Protective effect of vitamin E against chromosomal aberrations and mutation induced by sodium chromate in Chinese hamster V79 cells.

The effect of vitamin E on chromosomal aberrations and mutation caused by Na2CrO4 was investigated in Chinese hamster V79 cells. Pretreatment with 25 microM alpha-tocopherol succinate (vitamin E) for 24 h prior to chromate exposure (2.5-5 microM) resulted in a decrease of metal-induced chromosomal aberrations. Na2CrO4 (2.5-7.5 microM) induced mutations at the HGPRT locus, but only within a very limited concentration range. This mutagenic response could also be suppressed by pretreatment with vitamin E. These results suggest that vitamin E can protect cells from the clastogenic and mutagenic action of chromate compounds, possibly through its ability to scavenge chromium(V) and/or free radicals.

Animals↗
PubMed1995

[Lung disorders due to metals].

Though metals represent the largest group of elements they rather rarely cause respiratory diseases. This article will therefore review the most important ones caused by inhaled dusts of metals and some of their inorganic compounds, but leaving aside silicosis and silicatosis as well as iatrogenically induced metal pneumopathies. Among toxic inflammatory diseases metal fume fever, an influenza-like condition caused by zinc oxide, ranks as the commonest. Activities such as oxi-acetylene cutting and welding of zinc covered metal pieces account for about 90% of all cases compensated in Switzerland. Due to the non-recurrent character of this type of work, the typical waning of symptoms while exposure is going on has become seldom. Toxic pneumonia caused by inhaled metal fumes occurs rather seldom. However, serious cases have been reported where soldiers were exposed to zinc chloride from smoke bombs. The existence and extent of chronic airflow limitation due to occupational exposure to metallic dusts have not been widely examined but are to be assumed when there is poor occupational hygiene. Concerning asthma, there are at least four metals and several of their compounds which have been proven to cause variable airway narrowing, namely chromium, nickel, platinum and cobalt (the latter as hardmetal). Platinum complex salts (chloro-compounds) are very potent sensitizers leading to a notable prevalence of asthma among exposed workforces. Nevertheless, there have been no such cases in Switzerland for more than ten years. Hard-metal not only causes asthma but also an alveolitis-like interstitial lung disease progressing to fibrosis.(ABSTRACT TRUNCATED AT 250 WORDS)

Asthma↗
PubMed1986

Cellular uptake, cytotoxic and mutagenic effects of insoluble chromic oxide in V79 Chinese hamster cells.

The cellular uptake, the cytotoxicity and the induction of resistance to 6-thioguanine (6-TG) in Chinese hamster V79 cells exposed to insoluble crystalline trivalent chromium [Cr(III)], Cr2O3, were investigated. Intracytoplasmic Cr2O3 crystalline particle-containing vacuoles were observed by electron microscopy. Concentrations of 50-200 micrograms/ml did not have a marked killing effect but did show a predominantly concentration-dependent inhibitory effect on cell cycle progression with accumulation of cells in G2 phase. Exposure for 18 h to Cr2O3 induced a statistically significant (p less than 0.001) increase in the mutation frequency of up to 10-fold over the controls. Expression time was 6 days for the lowest concentration and 9 days for the highest. Culture of 6-TGr clones in selective media indicated that they were mutants at the hypoxanthine-guanine phosphoribosyl transferase (HGPRT) locus. Examination of growth patterns of Cr2O3-induced mutants showed that, after a delay in reinitiating cell growth, they had varying growth kinetics. The results indicate the ability of a particulate (Cr(III) compound to induce mutation in a mammalian cell system and the usefulness of such systems for detecting genotoxic insoluble metal compounds.

Animals↗
PubMed2000

Synthesis of axially chiral benzamides utilizing tricarbonyl(arene)chromium complexes.

Axially chiral N,N-diethyl 2,6-disubstituted benzamides were stereo-selectively prepared utilizing planar chiral (arene)chromium complexes as an enantiomerically active form by following two methods. Ortho-lithiation of the enantiomerically pure planar chiral tricarbonyl(N,N-diethyl 2-methylbenzamide)chromium complex followed by electrophilic quenching gave axially chiral 2-methyl-6-substituted N,N-diethyl benzamide chromium complexes. Photo-oxidative demetalation produced the chromium-free axially chiral benzamides as optically active compounds. An alternative method for the preparation of axial chiral benzamides is an enantioselective lithiation at the benzylic methyl of meso tricarbonyl(N,N-diethyl 2,6-dimethylbenzamide)chromium with appropriate chiral lithium amide base followed by quenching with alkyl halides.

Journal Article↗