SEARCH · Search PubMed
Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Hydrogenation of a series of cyclic beta-(acylamino)acrylates with tetrasubstituted olefins has been accomplished successfully with the use of Ru catalysts with chiral biaryl ligands such as C3-TunaPhos, and up to over 99% ee's have been achieved. This methodology provides an efficient catalytic method for the synthesis of both cis and trans chiral cyclic beta-amino acid derivatives.
A study of proton diffusion across membranes of block copolymer vesicles in dilute solution is described. The vesicles were formed by the self-assembly of a diblock copolymer of poly(styrene-b-acrylic acid) (PS(310)-b-PAA(36), where the numbers represent the degree of polymerization for individual blocks). A pH gradient was created across the vesicle membrane with the interior pH (pH(in)) of ca. 2.9 and the exterior pH (pH(out)) of ca. 8.5. The permeability of the polystyrene (PS) membrane was tuned by the addition of different amounts of dioxane (0-40 wt %) to the external aqueous solution. Proton concentrations in the solution outside of the vesicles were followed by monitoring the spectrum of a pH-sensitive fluorescent dye, namely 8-hydroxypyrene-1,3,6-trisulfonate. After the start of the experiment, the proton concentrations increase linearly with the square root of time, while the slopes of the lines increase with dioxane content. To calculate the diffusion coefficients of the protons across the vesicular membrane, the concentration data were fitted using a model, which describes the diffusion of species across the membrane of a reservoir. The apparent diffusion coefficient (D*, which equals the true diffusion coefficient multiplied by the partition coefficient of protons between PS and water) increases from 1.1 x 10(-18) cm(2)/s at 7 wt % dioxane in the external solution to 1.2 x 10(-14) cm(2)/s at 40 wt %. The increase of D* with dioxane content is related to its plasticization of the PS membrane, which can be used as a gating mechanism.
Polymer-polymer interactions were investigated for mixtures of a poly(acrylic acid) (pAA) carrying azobenzene (pC12Azo) and two kinds of pAA carrying alpha-cyclodextrin (CD), in which CDs are attached to the main chain through the 3- and 6-positions in CD (p3alphaCD and p6alphaCD, respectively), using several techniques, such as viscosity and NMR measurements. Viscosity data exhibited contrast changes upon UV irradiation: thinning (p3alphaCD/pC12Azo) and thickening (p6alphaCD/pC12Azo). NOESY spectra confirmed that the contrast viscosity changes were ascribable to differences in how CD moieties interact with pC12Azo after photoisomerization of azobenzene moieties from trans to cis: dissociation of inclusion complexes (p3alphaCD/pC12Azo) and formation of interlocked complexes (p6alphaCD/pC12Azo).
When whole or skim milk was incubated with the cationic acrylate polymer Eudragit E100, a biphasic effect on the stability of casein micelles was observed. A precipitation phase was observed at low polymer/casein ratios. Strikingly, a solubilization phase of the aggregates was observed when the ratios of polymer/casein were increased. Purified alpha(s)-, beta-, and kappa-caseins or dephosphorylated caseins were equally precipitated and resolubilized by the cationic polymer, indicating no special selectivity for a particular protein or phosphate residue for these events. An increase in the size of the aggregates as the optimum precipitating amount of Eudragit E100 was reached suggests a crossbridging of the micelles by the polymer. The inhibition of the precipitation phase by high ionic strength indicates that electrostatic interactions play a critical role in complex formation. Furthermore, a dramatic reduction in size of the protein colloidal particles upon solubilization of the aggregates was observed by dynamic light scattering, indicating a dissociation of the micellar structure. Taken together, the results indicate that at low concentration Eudragit E100 may act as a precipitant of casein micelles, mainly by ionic interaction and at high concentration as an amphipathic agent, solubilizing casein micelles with a disruption of their internal structure.
The bridging mechanism of antithrombin inhibition of thrombin is a dominant mechanism contributing a massive approximately 2500-fold acceleration in the reaction rate and is also a key reason for the clinical usage of heparin. Our recent study of the antithrombin-activating properties of a carboxylic acid-based polymer, poly(acrylic acid) (PAA), demonstrated a surprisingly high acceleration in thrombin inhibition (Monien, B. H.; Desai, U. R. J. Med. Chem. 2005, 48, 1269). To better understand this interesting phenomenon, we have studied the mechanism of PAA-dependent acceleration in antithrombin inhibition of thrombin. Competitive binding studies with low-affinity heparin and a heparin tetrasaccharide suggest that PAA binds antithrombin in both the pentasaccharide- and the extended heparin-binding sites, and these results are corroborated by molecular modeling. The salt-dependence of the K(D) of the PAA-antithrombin interaction shows the formation of five ionic interactions. In contrast, the contribution of nonionic forces is miniscule, resulting in an interaction that is significantly weaker than that observed for heparins. A bell-shaped profile of the observed rate constant for antithrombin inhibition of thrombin as a function of PAA concentration was observed, suggesting that inhibition proceeds through the "bridging" mechanism. The knowledge gained in this mechanistic study highlights important rules for the rational design of orally available heparin mimics.
[reaction: see text] Dichlorocyclopropanation of (-)-O-menthyl acrylate under conditions of phase-transfer catalysis (CHCl3, KOH, tetramethylammonium bromide), with sonication, gives excellent yields (85-94%) of the corresponding dichlorocyclopropanecarboxylate ester compared to thermal conditions (90 degrees C, 56%). No diastereoselectivity was observed, but one isomer was isolated pure by fractional crystallization. The measured kinetic isotope effect (initial rate (CHCl3)/rate (CDCl3) approximately 1.7) suggests deprotonation of CHCl3 as the rate-limiting step.
4-Alkoxycarbonyl and aminocarbonyl-substituted isoxazoles undergo conjugate reduction to give delta2-isoxazolines on treatment with sodium borohydride and sodium trifluoroacetoxyborohydride, respectively. They are also alkylated at C5 through sonication with secondary and tertiary alkyl iodides in the presence of zinc dust and copper(I) iodide. These reactions are analogous to those observed with acrylates and acrylamides. The behavior is characteristic of the 4-substituted isoxazoles but not the 5-substituted regioisomers. The reductions of 4,5-disubstituted isoxazoles and the C5 alkylations of 4-substituted isoxazoles generally afford trans-4,5-disubstituted isoxazolines. Incorporating chiral auxiliaries into the alkoxycarbonyl group maintains this relative stereoselectivity. It does not provide significant levels of asymmetric induction in the reductions, but the alkylations occur with good levels of stereocontrol at both C4 and C5. Because both enantiomers of the auxiliaries are available, this provides access to either enantiomer of the products, in 93 to > or = 98% de. The methodology, therefore, provides a complementary approach to nitrile oxide cycloadditions to alkenes for the asymmetric synthesis of delta2-isoxazolines.
Interaction between a monodispersed poly(acrylic acid) (PAA) (M(W) = 5670 g/mol, M(w)/M(n) = 1.02) with sodium dodecyl sulfate (SDS) was investigated using isothermal titration calorimetry (ITC), ion-selective electrode (ISE), and dynamic light scattering measurements. Contrary to previous studies, we report for the first time evidence of interaction between SDS and PAA when the degree of neutralization (alpha) of PAA is lower than 0.2. Hydrocarbon chains of SDS cooperatively bind to apolar segments of PAA driven by hydrophobic interaction. The interaction is both enthalpy and entropy favored (deltaH is negative but deltaS is positive). In 0.05 wt % PAA solution, the SDS concentration corresponding to the onset of binding (i.e., CAC) is approximately 2.4 mM and the saturation concentration (i.e., C(S)) is approximately 13.3 mM when alpha = 0. When PAA was neutralized and ionized, the binding was hindered by the enhanced electrostatic repulsion between negatively charged SDS and PAA chains and improved solubility of the polymer. With increasing alpha to 0.2, CAC increases to approximately 6.2 mM, C(S) drops to 8.6 mM, and the interaction is significantly weakened where the amount of bound SDS on PAA is reduced considerably. The values of CAC and C(S) derived from different techniques are in good agreement. The binding results in the formation of mixed micelles on apolar PAA coils, which then expands and dissociates into single PAA chains. The majority of unneutralized PAA molecules exist as single polymer chains stabilized by bound SDS micelles in solution after the saturation concentration.
The temperature-induced structural changes and thermodynamics of ionic microgels based on poly(acrylic acid) (PAA) networks bonded with poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) (Pluronic) copolymers have been studied by small-angle neutron scattering (SANS), ultra-small-angle neutron scattering (USANS), differential scanning calorimetry (DSC), and equilibrium swelling techniques. Aggregation within microgels based on PAA and either the hydrophobic Pluronic L92 (average composition, EO8PO52EO8; PPO content, 80%) or the hydrophilic Pluronic F127 (average composition, EO99PO67EO99; PPO content, 30%) was studied and compared to that in the solutions of the parent Pluronic. The neutron scattering results indicate the formation of micelle-like aggregates within the F127-based microgel particles, while the L92-based microgels formed fractal structures of dense nanoparticles. The microgels exhibit thermodynamically favorable volume phase transitions within certain temperature ranges due to reversible aggregation of the PPO chains, which occurs because of hydrophobic associations. The values of the apparent standard enthalpy of aggregation in the microgel suspensions indicate aggregation of hydrophobic clusters that are more hydrophobic than the un-cross-linked PPO chains in the Pluronic. Differences in the PPO content in Pluronics L92 and F127 result in a higher hydrophobicity of the resulting L92-PAA-EGDMAmicrogels and a larger presence of hydrophobic, densely cross-linked clusters that aggregate into supramolecular structures rather than micelle-like aggregates such as those formed in the F127-PAA-EGDMA microgels.
The biomass of Penicillium chrysogenum was modified by graft polymerization of acrylic acid (AAc) on the surface of ozone-pretreated biomass. The sorption capacity for copper and cadmium increased significantly as a large number of carboxyl groups were present on the biomass surface, especially when the carboxylic acid group was converted to carboxylate ions using NaOH. When modeled using the Langmuir isotherm, the sorption capacities were 1.70 and 1.87 mmol g(-1) for copper and cadmium, respectively. The loaded biosorbent was regenerated using HCl solution and used repeatedly over five cycles with little loss of uptake capacity beyond the second cycle. The sorption of the two metals was time-dependent, and the kinetics fitted the pseudo-second-order equation well. The Freundlich, Langmuir, Temkin, and Dubinin-Redushkevich isotherms were used to model the metal sorption isotherms, and the thermodynamic parameters calculated show that the sorption was spontaneous and endothermic under the condition applied and that the biomass has similar sorption affinities for the two metals. Fourier transform infrared and X-ray photoelectron spectroscopy reveal that carboxyl, amide, and hydroxyl groups on the biomass surface were involved in the sorption of copper and cadmium and ion exchange and complexation dominated the sorption process.
Pluronic-PAA, a thermogelling copolymer composed of side chains of poly(acrylic acid) (PAA) grafted onto a backbone of Pluronic copolymer, is of interest as a vehicle for the controlled release of compounds. An important feature of such a vehicle is its bioadhesive/mucoadhesive properties, which in the case of Pluronic-PAA are significant due to the presence of the PAA side chains. An atomic force microscopy (AFM) method has been developed and utilized to investigate the interactions between a Pluronic-PAA-modified microsphere and mucous substrates. The bioadhesive force was successfully measured, and trends were observed under conditions of varying pH and ionic strength. Pluronic-PAA exhibits significant mucoadhesion over a range of pH values, with mucoadhesion being optimal at pH 4-5 (adhesive force approximately 80 mN/cm(2)) and dropping sharply at higher pH, to a value of approximately 20 mN/cm(2) at pH 8. The mucoadhesive force decreased with increasing ionic strength, from a value of approximately 80 mN/cm(2) in 0.025 M NaCl to approximately 25 mN/cm(2) in 1.0 M NaCl. These results have been interpreted in terms of the effect of changing pH and ionic strength on electrostatic interactions and swelling of the polymer and mucin layers. Tensiometric force measurements indicated that hydrophobic interactions, as well as hydrogen bonding and electrostatic interactions, were significant in the mucoadhesion of Pluronic-PAA copolymers. Experiments with a range of Pluronic-PAA copolymers with varying PPO contents in the Pluronic segments showed that increasing the overall PPO content increased the hydrophobicity of the polymer solutions. This was reflected in the increases in the advancing contact angles with the mucin layer, indicating that hydrophobic interactions play a role in the adhesion of Pluronic-PAA to mucin.
The binding of dodecyltrimethylammonium bromide (DoTab) to cross-linked methacrylic acid-ethyl acrylate (MAA-EA) copolymers with various MAA/EA molar ratios at different degrees of neutralization (alpha) was quantitatively studied using isothermal titration calorimetry, dynamic light scattering, surfactant selective electrode, and electrophoresis techniques. The surfactant binds to the polymers at all degrees of neutralization, but via different mechanisms. When alpha is sufficiently high, the binding is primarily electrostatic interaction between the surfactant and ionized polymer chains, which is reinforced by the micellization of electrostatically bound surfactant molecules. The saturation takes place at charge ratio ([DoTa(+)]/[ approximately COO(-)]) close to 1, indicating that the binding is a one-to-one charge neutralization between the cationic surfactant headgroups and anionic carboxylate sites of the polymers. When alpha is low, the binding of DoTab to the unneutralized polymers is driven by the hydrophobic interaction. The onset of hydrophobic binding takes place at DoTab concentration as low as 0.01 mM in 0.05 wt % polymer solution, where the saturation occurs at C(DoTab) approximately 0.19 mM and the amount of bound surfactant is approximately 0.09 mmol of DoTab/(g of polymer) at saturation concentration. The binding results in the formation of the polymer-surfactant complex. For the polymer with low MAA/EA molar ratio, the complex coagulates at a higher DoTab concentration that leads to phase separation; however, for polymers with high MAA/EA molar ratio, the complex remains dispersed and the mixture is stable even at high DoTab concentration.
Complexation of antitumor drug, doxorubicin (DOX), with poly(acrylic acid) (PAA) in buffer solutions was examined. The DOX-to-PAA binding was governed by electrostatic and stacking interactions resulting in a complex of characteristic composition with a PAA/DOX = 1.6 molar ratio. Sizes of the complex particles were found to lie in 600-900-nm range. However, the particles were able to interact with small neutral egg yolk lecithin liposomes (80-100 nm in diameter), a ternary DOX/PAA/liposome complex being formed. The observations and conclusions we made may be useful for interpreting biological effects of polymer-based bioactive constructs.
Binding of the nonionic surfactants Triton X-100 and Triton X-405 onto linear copolymers of N-isopropylacrylamide (NIPAM) and acrylic acid and to cross-linked microgel particles of similar composition but differing in their cross-link densities has been studied. The binding capacities vary for each of these polymeric systems, being smallest for the linear copolymer. The binding is also significantly less in all cases for the more hydrophilic surfactant, namely, Triton X-405. By comparing estimates of the pore or "cage" size within the microgel particles with the dimensions of the free micelles in solution, it is concluded that micelles of Triton X-100 form within the microgel particles more readily for the lower cross-linked microgel particles. However, micelles do not form as easily inside either microgel for Triton X-405. The swelling/deswelling behavior of each of the two microgels, in the presence of the surfactants, has been explained in terms of their relative binding behavior and how this contributes to the osmotic pressure difference inside and outside the microgel particles and also in terms of micelle "bridging" of the polymer network, causing shrinkage.
Water-soluble pH-responsive [60]fullerene end-capped poly(acrylic acid) (PAA85-b-C60) was synthesized using atom-transfer radical polymerization (ATRP) technique. The unusual morphological transformation of the polymer induced by the binding of nonionic surfactant Triton X-100 (TX100) at different degrees of neutralization (alpha) was investigated using isothermal titration calorimetry (ITC), UV-vis spectroscopy, dynamic light scattering (DLS), and transmission electron microscopy (TEM). For the 5 mM (monomer concentration) polymer solution at pH < 4, approximately 1.3 mM TX100 binds specifically to C60 domains of the polymeric micelles driven by hydrophobic interaction, which induces a structural transformation of the polymer from a large compound micelle with a radius of 110 nm to a dense precipitated spherical polymer/surfactant complex (PSC) with a radius of 500 nm. The precipitates are resolubilized by a wetting layer of TX100 in excess surfactant (> 1.7 mM in the polymer solution). The binding is significantly weakened and the complexation is disrupted with increasing pH, where the interaction completely ceased at pH > 6.
Particles of amorphous calcium carbonate (ACC), formed in situ from calcium chloride by the slow release of carbon dioxide by alkaline hydrolysis of dimethyl carbonate in water, are stabilized against coalescence in the presence of very small amounts of double hydrophilic block copolymers (DHBCs) composed of poly(ethylene oxide) (PEO) and poly(acrylic acid) (PAA) blocks. Under optimized conditions, spherical particles of ACC with diameters less than 100 nm and narrow size distribution are obtained at a concentration of only 3 ppm of PEO-b-PAA as additive. Equivalent triblock or star DHBCs are compared to diblock copolymers. The results are interpreted assuming an interaction of the PAA blocks with the surface of the liquid droplets of the concentrated CaCO3 phase, formed by phase separation from the initially homogeneous reaction mixture. The adsorption layer of the block copolymer protects the liquid precursor of ACC from coalescence and/or coagulation.
Biosensor construction and characterization studies of poly(acrylic acid) (PAA) and poly(1-vinyl imidazole) (PVI) complex systems have been carried out. The biosensors were prepared by mixing PAA with PVI at several stoichiometric ratios, x (molar ratio of the monomer repeat units). The enzyme, invertase, was entrapped in the PAA/PVA interpenetrating polymer networks during complexation. Modifications were made on the PAA/PVI conducting polymer electrolyte matrixes to improve the stability and performance of the polymer electrolyte-based enzyme biosensor. The maximum reaction rate (V(max)) and Michaelis-Menten constant (K(m)) were investigated for the immobilized invertase. The temperature and pH optimization, operational stability, and shelf life of the polymer electrolyte biosensor were also examined.
The adsorption of two different proteins at a planar poly(acrylic acid) (PAA) brush was studied as a function of the ionic strength of the protein solutions applying total internal reflection fluorescence (TIRF) spectroscopy. Planar PAA brushes were prepared with a grafting density of 0.11 nm(-2) and were characterized using X-ray reflectometry. Hen egg-white lysozyme and bovine serum albumin (BSA) were used as model proteins, which have a net positive and negative charge at neutral pH-values, respectively. It has been found that both proteins adsorb strongly at a planar PAA brush at low ionic strength. Whereas lysozyme interacts with a PAA brush under electrostatic attraction at neutral pH-values, BSA binds under electrostatic repulsion at pH > 5. Even at pH = 8, significant amounts of BSA are adsorbed to a planar PAA brush. In addition, the reversibility of BSA adsorption has been characterized. Dilution of a BSA solution leads to an almost complete desorption of BSA from a PAA brush at short contact times. When the ionic strength of the protein solutions is increased to about 100-200 mM, a planar PAA brush appears largely protein-resistant, regardless of the protein net charge. The results of this study indicate that the salt-dependent protein affinity of a PAA brush represents a unique effect that must be explained by a novel protein-binding mechanism. On the basis of a recent model, it is suggested that a release of counterions is the most probable driving force for protein adsorption at a PAA brush. In a general view, this study characterizes a planar PAA brush as a new materials coating for the controlled immobilization of proteins whose use in biotechnological applications appears to be rewarding.