Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Polyelectrolytes”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76Linked to original sources
PubMed2005

Equilibrium aspects of polycation adsorption on silica surface: how the adsorbed layer responds to changes in bulk solution.

Adsorption of cationic high molecular weight polyacrylamides (CPAM) (M(w) is about 800 kDa) with different fractions of cationic units tau = 0.09 and tau = 0.018 onto silica surface was studied over a wide range of pH (4-9) and KCl concentration (c(s) = 10(-3)-10(-1) M) by in-situ null ellipsometry. We discuss how the adsorbed layer depends on the bulk conditions as well as kinetically responds to changes in solution conditions. The adsorbed amount Gamma of CPAM increases with pH for all studied electrolyte concentrations until a plateau Gamma is reached at pH > 6. At low pH we observed an increase in adsorbed amount with electrolyte concentration. At high pH there is no remarkable influence of added salt on the values of the adsorbed amount. The thickness of adsorbed polymer layers, obtained by ellipsometry, increases with electrolyte concentration and decreases with pH. At low c(s) and high pH the polyelectrolyte adsorbs in a flat conformation. An overcompensation of the surface charge (charge reversal) by the adsorbed polyelectrolyte is observed at high c(s) and low pH. To reveal the reversibility of the polyelectrolyte adsorption with respect to the adsorbed amount and layer thickness, parameters such as polyelectrolyte concentration (c(p)), c(s), and pH were changed during the experiment. Generally, similar adsorbed layer properties were obtained independent of whether adsorption was obtained directly to initially bare surface or by changing pH, c(s), or the concentration of polyelectrolyte solution in the presence of a preadsorbed layer, provided that the coverage of the preadsorbed layer was low. Once a steady state of the measured parameters (Gamma, d) was reached, experimental conditions were restored to the original values and corresponding changes in Gamma and adsorbed layer thickness were recorded. For initially low surface coverage it was impossible to restore the layer properties, and in this case we always ended up with higher coverage than the initial values. For initial high surface coverage it was usually possible to restore the initial layer properties. Thus, we concluded that polyelectrolyte appears only partially reversible to changes in the solution conditions due the slow rearrangement process within the adsorbed layer.

Journal Article↗
PubMed2002

Comparison between J-aggregates in a self-assembled multilayer and polymer-bound J-aggregates in solution: a steady-state and time-resolved spectroscopic study.

The self-assembly of a thiacarbocyanine dye on a charged substrate via the layer-by-layer alternate adsorption technique was studied in detail. The influence of the chemical structure of the oppositely charged polyelectrolyte (PEL) in the multilayer on J-aggregate formation was investigated by means of absorption spectroscopy and steady-state and time-resolved fluorescence spectroscopy. J-Aggregates were formed yielding a bathochromic narrow absorption band. Fine tuning of the position of the absorption band is possible by incorporating other polyelectrolytes in the multilayer. The results obtained for the dye-polyelectrolyte multilayers were compared with measurements made on the aqueous dye-polyelectrolyte mixtures. The parameters obtained by fitting the fluorescence decays to several different models allowed us to suggest a mechanism for the non-radiative decay channel. The low fluorescence quantum yields and fast non-exponential fluorescence decays obtained for both the dye-polyelectrolyte multilayers and the aqueous dye polyelectrolyte mixtures were attributed to the trapping of a fast migrating exciton by a non-luminescent trap. The results related to J-aggregate formation, decay time and dimensionality of the aggregates were compared in solution and in a self-assembled multilayer.

Journal Article↗
PubMed1994

Phosphophoryn, a biomineralization template protein: pH-dependent protein folding experiments.

The protein folding behavior of a polyelectrolyte protein, bovine dentine phosphophoryn (BDPP), in the pH range of 1.82-11.0 has been investigated. One- and two-dimensional nmr spectroscopy has been utilized to obtain proton spin assignments for amino acid residues in D2O and in H2O. One-dimensional 31P-nmr experiments verify the existence of three separate classes of O-phosphoserine (PSer) resonances in BDPP (alpha, beta, chi), representing three distinct PSer residue populations at pH 6.94. By means of pH titration and 1H-nmr, five populations of Asp residues can be identified. Three of these populations exhibit secondary inflection points on their pH titration curves that correspond to an observed pKa of 6.17-6.95. The presence or absence of secondary inflection points for Asp populations and the 31P-nmr chemical shift dispersion for the three PSer residue populations indicate that BDPP may be comprised of homologous (Asp-Asp)n. (PSer-PSer)n, and heterologous (PSer-Asp)n sequences arranged into polyelectrolyte cluster regions. The pH titration also revealed that certain populations of Ser, Gly, and Pro residues in BDPP exhibit pH-dependent resonance frequency shifts. The "apparent" pKa for the transition points of these frequency shifts corresponds to either the pK1a of Pser monophosphate ester and/or the pKa of Asp COOH group of BDPP polyelectrolyte regions. On the basis of these transition points, we can assign four types of Ser, Gly, or Pro-containing "intervening" regions in BDPP, based on their sensitivity to protonation and deprotonation events occurring at (Asp)n, (PSer)n, or (PSer-Asp)n anionic cluster regions that flank the intervening regions. Our 1H-nmr experiments also reveal that BDPP assumes a folded conformation at low pH. As the pH increases, this conformation undergoes several unfolding transitions as the BDPP molecule assumes more open conformations in response to increased electrostatic repulsion between polyelectrolyte anionic regions in the protein. These folding-unfolding transitions are mediated by the intervening regions, which act as "hinges" to allow the polyelectrolyte regions to fold relative to one another.

Animals↗
PubMed1995

Electrophoresis between sieving and reptation: an investigation of the role of shape fluctuations in electrophoresis.

We present numerical simulation results of electrophoretic mobilities of flexible polyelectrolytes over a wide molecular size range moving through gels with various pore sizes. The data are compared to existing models for different molecular size regimes and to experimental results. We observe rather pronounced shape fluctuations of the polyelectrolytes which, especially for larger gel pores or small molecules, have a strong impact on the dynamics of the molecules. Electrophoretic separation, as is used e.g. for DNA sequencing, is best achieved for polyelectrolytes with a radius of gyration of the order of the average pore radius of the gel, i.e. in a molecular size regime where the polyelectrolyte interacts with only a few gel fibers at a given time. A decrease of the gel pore size leads to a systematic decrease of the electrophoretic mobility, but does not lead to a qualitative change in the molecular size dependence, as long as the pore size is larger than the persistence length of the polyelectrolyte.

Electrolytes↗
PubMed2002

Particulate hematite diffusion in sodium polyacrylate solutions. The effect of ionic strength.

The diffusion coefficients of hematite particles in polyelectrolyte solution have been investigated using dynamic light scattering. Two apparent diffusion coefficients, a fast and a slow diffusional mode, are observed for the hematite particles in high-molecular-weight sodium polyacrylate solution at pH 10.5. The slow diffusion coefficient (Dslow) shows a decrease with increase in polyelectrolyte concentration. The fast diffusion coefficient (Dfast) shows an increase to a maximum with increasing polyelectrolyte concentration and then a rapid decrease as the polyelectrolyte concentration increases further. With an increase in ionic strength from 10(-4) to 0.1 M NaNO3, the maximum value of Dfast increased in magnitude, while the polyacrylate concentration at which the maximum occurs is seen to increase. The dependence of Dfast on the measurement angle indicates that it is coupled to the fluctuations of the chains. The observed behavior is attributed to the hematite probe particle sensing both macroscopic (viscous) and elastic fluctuations associated with the polyelectrolyte motion.

Acrylic Resins↗
PubMed1982

Bacteria and zymosan opsonized with histone, dextran sulfate, and polyanetholesulfonate trigger intense chemiluminescence in human blood leukocytes and platelets and in mouse macrophages: modulation by metabolic inhibitors in relation to leukocyte-bacteria interactions in inflammatory sites.

Human blood leukocytes and platelets and mouse peritoneal macrophages emit very rapid and very intense Luminol-dependent chemiluminescence (CL) signals when treated with streptococci, staphylococci, or with zymosan, which have been preopsonized with arginine-rich histone, dextran sulfate or polyanetholesulfonate (liquoid). Liquoid alone at 10-30 micrograms/2 X 10(5) leukocytes also triggers intense CL responses in the absence of a carrier. Strong CL can also be triggered, and at the same levels, when the various polyelectrolytes are simply mixed with the bacteria or zymosan and added to the leukocyte suspensions. The CL responses induced by the polyelectrolyte-bacteria complexes greatly exceed those triggered in leukocytes by antibody-complement-coated particles. Liquoid also shows a unique property of markedly augmenting CL signals which have already been induced by other ligand-coated bacteria or zymosan particles. Streptococci and staphylococci were found to be much superior to zymosan, Gram-positive bacilli, or E. coli as carriers for the various polyelectrolytes in the CL reaction. Neither protamine sulfate, lysozyme, myeloperoxidase, crystalline ribonuclease (all cationic in nature), chondroitin sulfate, heparin, nor alginate sulfate acted as ligands for triggering CL, when used to opsonize bacteria or zymosan. The induction of CL in blood leukocytes by the various ligand-coated bacteria is markedly inhibited by azide, KCN catalase, aminotriazole, and EDTA, agents known to inhibit the production of oxygen radicals following stimulation of leukocytes by opsonized bacteria. Two children diagnosed for chronic granulomatous diseases (CGD) of childhood and an apparently healthy sister of one of the male patients completely failed to respond with CL either to the polyelectrolyte-bacteria complexes, liquoid or antibody-coated bacteria and zymosan. It is proposed that liquoid be employed for the rapid screening of defects in certain oxygen-dependent metabolic processes in both PMNs and macrophages. It is also suggested that polyelectrolytes like the ones described in this study may markedly enhance the bactericidal properties of leukocytes and macrophages towards both extracellular and intracellular microorganisms and may perhaps also augment the tumoricidal effects of activated macrophages.

Adult↗
PubMed2005

Performance optimization of coagulant/flocculant in the treatment of wastewater from a beverage industry.

This study investigated the effect of coagulation/flocculation treatment process on wastewater of Fumman Beverage Industry, Ibadan, Nigeria. The study also compared different dosages of coagulant, polyelectrolyte (non-ionic polyacrylamide) and different pH values of the coagulation processes. The effect of different dosages of polyelectrolyte in combination with coagulant was also studied. The results reveal that low pH values (3-8), enhance removal efficiency of the contaminants. Percentage removal of 78, 74 and 75 of COD, TSS and TP, respectively, were achieved by the addition of 500 mg/L Fe2(SO4)3.3H2O and 93, 94 and 96% removal of COD, TSS and TP, respectively, were achieved with the addition of 25 mg/L polyelectrolyte to the coagulation process. The volume of sludge produced, when coagulant was used solely, was higher compared to the use of polyelectrolyte combined with Fe2(SO4)3.3H2O. This may be as a result of non-ionic nature of the polyelectrolyte; hence, it does not chemically react with solids of the wastewater. Coagulation/flocculation may be useful as a pre-treatment process for beverage industrial wastewater prior to biological treatment.

Beverages↗
PubMed2005

Enhanced adsorption of Cd (II) on a hydrous Al (III) floc in the presence of a modified form of polyethylenimine.

A polymer modified with succinic anhydride has been investigated for the adsorption of cadmium (II) on a freshly precipitated aluminium (III) hydroxide floc. The proportion of chelate attached to the polymer is varied to determine the relationship between carboxyl and amino groups on the polyelectrolyte, in terms of enhanced adsorption of cadmium (II) on a hydrous aluminium floc. The presence of polyelectrolyte enhanced the adsorption of 3.3 ppm Cd (II) on a 333 ppm Al (III) floc at every concentration of polyelectrolyte investigated. The proportion of succinic anhydride attached to the polymer had an impact on the increased adsorption of Cd (II) on an Al (III) floc observed. A decreasing proportion of succinic anhydride to polymer resulted in a decrease in the amount of cadmium adsorbed on the floc. Above pH 8, a decrease in the % Cd (II) adsorbed on the floc and % Al (III) retained within the floc decreases with the presence of polyelectrolyte as a result of the formation of soluble Cd-Polyethylenimine-succinic acid (PEISA) complexes. When the Al-PEISA combination was applied to a complex matrix where Cd (II), Cu (II) and Ni (II) ions competed for adsorption, enhanced adsorption was observed for Cd (II) and Ni (II). At pH 7, dissolution of the floc observed with the addition of discrete chelates was not observed with the addition of polyelectrolytes.

Adsorption↗
PubMedDate not supplied

Protein encapsulation via porous CaCO3 microparticles templating.

Porous microparticles of calcium carbonate with an average diameter of 4.75 microm were prepared and used for protein encapsulation in polymer-filled microcapsules by means of electrostatic layer-by-layer assembly (ELbL). Loading of macromolecules in porous CaCO3 particles is affected by their molecular weight due to diffusion-limited permeation inside the particles and also by the affinity to the carbonate surface. Adsorption of various proteins and dextran was examined as a function of pH and was found to be dependent both on the charge of the microparticles and macromolecules. The electrostatic effect was shown to govern this interaction. This paper discusses the factors which can influence the adsorption capacity of proteins. A new way of protein encapsulation in polyelectrolyte microcapsules is proposed exploiting the porous, biocompatible, and decomposable microparticles from CaCO3. It consists of protein adsorption in the pores of the microparticles followed by ELbL of oppositely charged polyelectrolytes and further core dissolution. This resulted in formation of polyelectrolyte-filled capsules with protein incorporated in interpenetrating polyelectrolyte network. The properties of CaCO3 microparticles and capsules prepared were characterized by scanning electron microscopy, microelectrophoresis, and confocal laser scanning microscopy. Lactalbumin was encapsulated by means of the proposed technique yielding a content of 0.6 pg protein per microcapsule. Horseradish peroxidase saves 37% of activity after encapsulation. However, the thermostability of the enzyme was improved by encapsulation. The results demonstrate that porous CaCO3 microparticles can be applied as microtemplates for encapsulation of proteins into polyelectrolyte capsules at neutral pH as an optimal medium for a variety of bioactive material, which can also be encapsulated by the proposed method. Microcapsules filled with encapsulated material may find applications in the field of biotechnology, biochemistry, and medicine.

Calcium Carbonate↗
PubMed2005

Diffusion of uncharged probe reveals structural changes in polyacids initiated by their neutralization: poly(acrylic acids).

The diffusion studies of the uncharged probe (1,1'-ferrocenedimethanol) have been successfully applied for the evaluation of the changes in the three-dimensional structure of poly(acrylic acids) of various molecular weights (ranging from 2000 to 4,000,000 g/mol) during their neutralization with a strong base. The qualitative picture of the macromolecule arrangement during the titration of the polyacids has been obtained from the conductometric measurements. The characteristic changes in the poly(acrylic acid) conductivity are practically the same for all polyacids examined and are in a very good agreement with the predictions of our theoretical model of the polyelectrolyte conductance. The transformation of the polyelectrolyte solution into the gel-like or gel phase has been investigated more quantitatively by tracing the changes in the diffusion coefficient of the uncharged probe redox system. The probe diffusivities, D, were determined using steady-state voltammetry at microelectrodes for a wide range of neutralization degree, alpha, of the polyacids tested. The dependencies of D versus alpha are of similar shape for all poly(acrylic acids). The first parts of the dependencies reflect a rapid increase in D (up to neutralization degree of either 45% for the lowest molecular-weight poly(acrylic acid) or 75-80% for other polyacids). They are followed by the parts of a slight drop in the diffusion coefficient. The changes in the probe diffusivity become stronger as the molecular weight of poly(acrylic acid) increases. The maximum probe diffusion coefficients are greater than the initial values in the pure polyacid solutions by 14, 24, 19, 30, and 28% for poly(acrylic acid) of molecular weights of 2000, 450,000, 1,250,000, 3,000,000, and 4,000,000 g/mol, respectively. The variation in the probe diffusion coefficient qualitatively follows the line of the changes in the macroscopic viscosity of the polyelectrolyte system. This is in contrast to the predictions of the Stokes-Einstein relation and, therefore, suggests that the changes in the probe diffusion rate are mainly due to the structural changes in the polyacrylate medium and the macromolecular rearrangements induced by the chemical, acid-base reaction. By adapting the obstruction model for diffusion in homogeneous gels, the transport characteristics of the probe were converted into the structural characteristics of the polyelectrolytic systems. It has been found that the most ordered structure of the polyelectrolyte, or in other words the most permeable structure, is obtained when poly(acrylic acid) is neutralized at 75-80%.

Journal Article↗
PubMed2005

Layer-by-layer assembly of polyoxometalates into microcapsules.

The polyoxometalate (POM) chemistry world has been experiencing an unparalleled development of rapid synthesis of new compounds and slow development of POM-based functional materials and devices. Meanwhile, researchers in the microcapsule world, encouraged by the introduction of the layer-by-layer method, are pursuing good components for constructing functional capsule devices. Here, in view of the versatile properties that POM-based microcapsules may possess, various types of POM-polyelectrolyte composite microcapsules were constructed using the layer-by-layer method. Microscopy reveals that polyoxometalates form nanoparticles on the shell in the presence of cationic polyelectrolytes. These nanoparticles connected with polyelectrolytes constitute the shell and support the microcapsule from collapse after drying, and this is an interesting characteristic different from those of common composite and polyelectrolyte capsules. Fourier transform infrared (FTIR), UV-vis absorption, and X-ray photoelectron spectroscopy (XPS) were used to examine the properties of the POMs in the microcapsules. The obtained microcapsules exhibit higher thermal stability than polyelectrolyte microcapsules. Furthermore, the functions of POMs were maintained when they were assembled into microcapsules. It is proved that microcapsules bearing POMs with redox activity can provide a reduction environment, which can lead to the realization of in situ synthesis of materials, and that microcapsules with photoluminescent POMs as a component can also have a photoluminescent property, providing a way to develop functional capsule devices. This work may provide an opportunity to enrich both the polyoxometalate chemistry and the capsule field.

Journal Article↗
PubMed2005

Thermodynamics of self-assembling of hydrophobically modified cationic polysaccharides and their mixtures with oppositely charged surfactants in aqueous solution.

Microcalorimetric techniques, combined with turbidity measurements, were used to study the thermodynamics of self-assembling of hydrophobically modified cationic polysaccharides and their mixtures with oppositely charged surfactants in aqueous solution. The studied polyelectrolytes were a series of polymers based on dextran having pendant N-(2-hydroxypropyl)-N,N-dimethyl-N-alkylammonium chloride groups randomly distributed along the polymer backbone. The parameters for their micellization process are evaluated from the results of the observed dilution enthalpy curves and compared with those of the related cationic surfactants (DTAC and CTAC). The microcalorimetric results for the mixed systems (polyelectrolytes with oppositely charged surfactants) are used along with turbidity measurements to characterize systematically the thermodynamics of their interaction. The phase behavior is described and the interaction enthalpies are derived from the differences between the observed enthalpy curves with and without polyelectrolyte. Therefore, we discuss in detail the effect of changing the alkyl chain length of polyelectrolyte pendant groups, the molecular weight of the dextran backbone, and the temperature of the measurements on the interactions between polyelectrolyte and surfactant.

Cations↗
PubMed2004

Functionalized multiwall carbon nanotube/gold nanoparticle composites.

Multiwall carbon nanotubes (MWCNTs) were chemically oxidized in a mixture of sulfuric acid and nitric acid (3:1) while being ultrasonicated. The effect of oxidative ultrasonication at room temperature on development of functional groups on the carbon nanotubes was investigated. The dispersability and the carboxylic acid group concentration of functionalized MWCNTs (fMWNTs) varied with reaction time. The concentration of carboxylic acid groups on fMWNTs increased from 4 x 10(-4) mol/g of fMWNTs to 1.1 x 10(-3) mol/g by doubling the treatment period from 4 to 8 h. The colloidal stability of aqueous fMWCNTs dispersions was enhanced through elongated oxidation. fMWCNTs that were reacted longer than 4 h did not precipitate in aqueous media for at least 24 h. The layer-by-layer self-assembly of polyelectrolytes on fMWCNTs was characterized by zeta potential measurements. The zeta potential of fMWCNTs changed from negative charge to positive charge when cationic polyelectrolytes were self-assembled on their surface. With addition of anionic polyelectrolytes, cationic polyelectrolyte coated fMWCNTs showed the expected charge reversal as expected for multilayer self-assembly. Complex formation of positively charged gold nanoparticles and negatively charged fMWCNTs was achieved with and without polyelectrolyte coatings by electrostatic interaction. The complex formation was characterized by high-resolution transmission electron microscopy and energy-dispersive X-ray spectroscopy. The here found complex formation of positively charged colloidal gold and defect sites on fMWNTs indicates the location of functional groups on carbon nanotubes. It is suggested that positively charged colloids such as gold nanoparticles could be used for detection of defect sites on carbon nanotubes.

Gold↗
PubMed2004

Adsorption of poly(ethyleneimine) on silica surfaces: effect of pH on the reversibility of adsorption.

The role of polymer charge density in the kinetics of the adsorption and desorption, on silica, of the polyelectrolyte poly(ethyleneimine) (PEI) was investigated by stagnation-point flow reflectometry. In the first series of experiments, PEI solutions were introduced at the same ionic strength and pH as the background solvent. It was found that the adsorbed amount of PEI increased by increasing pH. In the second series of investigations, several PEI solutions with ascending pH were introduced consecutively into the cell. In these cases, a stepwise buildup of the adsorbed amount was observed and the "final" adsorbed amounts were observed to be roughly equal with the adsorbed amounts of the first series of measurements at the same pH. Finally, adsorption/desorption experiments were performed where the preadsorption of PEI was followed by the introduction of PEI solutions of descending pH. No desorption was detected when the pH changed from pH = 9.7 to pH = 5.8. However, when there was a 9.7 --> 3.3 or 5.8 --> 3.3 decrease in the pH, the kinetic barriers of desorption seemed to completely disappear and roughly the same adsorbed amount as in the first series of experiments at pH = 3.3 was quickly attained by desorption of the PEI. This study reveals the high impact of pH, affecting parameters such as charge density of the surface and polyelectrolyte as well as the structure of the adsorbed macromolecules, on the desorption properties of weak polyelectrolytes. The observed interfacial behavior of PEI may have some important consequences for the stability of alternating polyelectrolyte multilayers containing weak polyelectrolytes.

Journal Article↗
PubMed2004

Counterions in poly(allylamine hydrochloride) and poly(styrene sulfonate) layer-by-layer films.

The amount of counterions in layer-by-layer (LBL) films of poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS) has been determined with X-ray photoelectron spectroscopy (XPS) for films prepared from solutions with various NaCl concentrations. Sodium and chloride counterions are present in LBL films produced from salt solutions, which are located at the surface and in the bulk of the films. The percentage of bulk counterions increases with the ionic strength of the polyelectrolyte before reaching a constant value. The bulk sodium/sulfur percentage ratios tend to 0.8 for samples washed with pure water and for samples washed with NaCl aqueous solutions, while the bulk chlorine/nitrogen percentage ratios tend to 0.5 for the same samples. The ratio between the percentages of polyelectrolyte ionic groups lies close to unity for all samples, indicating that counterions do not contribute to charge compensation in the polyelectrolyte during the adsorption process. The presence of counterions in LBL films is explained by Manning condensation near the polyelectrolyte ionic groups, leading to inter-polyelectrolyte ionic bondings via ionic networks. It is believed that condensation leads to the formation of NaCl crystallites in these LBL films, which was confirmed by X-ray diffraction measurements.

Crystallization↗
PubMed2006

Controlled, simultaneous assembly of polyethylenimine onto nanoparticle silica colloids.

A novel precision-assembly methodology is described on the basis of the controlled, simultaneous assembly (CSA) of a core nanoparticle substrate and polyelectrolyte solutions. The method is capable of assembly rates at least as fast as 10(16) core particles s(-1) L(-1) and affords concentrated suspensions of stable colloids with an adsorbed polyelectrolyte. The resulting dispersions are highly homogeneous, have a low viscosity and narrow particle-size distribution, and are stable colloids, even at solid concentrations of at least 33 wt %. The adsorption isotherm and the saturation adsorption for polyethylenimine (PEI) assemblies onto a 15 nm silica colloid have been evaluated with 1H NMR spectroscopy. The saturation adsorption is highly dependent upon the pH at assembly and is given by the equation PEIa (micromol m(-2)) = 1.73pH - 1.89, R2 = 0.986, where micromoles refers to the concentration of the EI monomer. The saturation concentration increases from 6.8 micromol m(-2) at pH 5.0 to 13.7 micromol m(-2) at pH 9.0. The adsorbed polyelectrolyte may be cross-linked and thereby permanently fixed to the colloid surface to prepare nanoparticle-polyelectrolyte colloidal assemblies having enhanced colloid stability, high homogeneity, and a high fraction (>80%) of permanently adsorbed polyelectrolyte. These assemblies are stable at physiological pH and ionic strength and may represent ideal substrates for bioconjugation and, ultimately, the design of nanocarriers for in vivo applications.

Journal Article↗
PubMed2004

Self-assembled virus-membrane complexes.

Anionic polyelectrolytes and cationic lipid membranes can self-assemble into lamellar structures ranging from alternating layers of membranes and polyelectrolytes to 'missing layer' superlattice structures. We show that these structural differences can be understood in terms of the surface-charge-density mismatch between the polyelectrolyte and membrane components by examining complexes between cationic membranes and highly charged M13 viruses, a system that allowed us to vary the polyelectrolyte diameter independently of the charge density. Such virus-membrane complexes have pore sizes that are about ten times larger in area than DNA-membrane complexes, and can be used to package and organize large functional molecules; correlated arrays of Ru(bpy)(3)(2+) macroionic dyes have been directly observed within the virus-membrane complexes using an electron-density reconstruction. These observations elucidate fundamental design rules for rational control of self-assembled polyelectrolyte-membrane structures, which have applications ranging from non-viral gene therapy to biomolecular templates for nanofabrication.

Bacteriophage M13↗
PubMedDate not supplied

[Lactate dehydrogenase in an interpolyelectrolyte complex. Function and stability].

A new method for encapsulating enzymes by multilayer polyelectrolyte coating is proposed. The method consists in a stepwise adsorption of polyelectrolytes from solution onto protein aggregates formed by salting out the proteins in highly concentrated salt solutions. Polystyrene sulfonate and fluorescence-labeled polyalylamine were used for capsule formation. The size of lactate dehydrogenase aggregates covered by four layer pairs of electrolytes was 1-5 microns, as indicated by fluorescence microscopy. The catalytic characteristics and stability of pig muscle lactate dehydrogenase (EC 1.1.1.13) incapsulated in multilayer electrolyte complex obtained by this method were studied. It was found that the affinity of the substrate pyruvate for the enzyme in the polyelectrolyte complex (K(M)) did not essentially change as compared with the free enzyme. Incapsulated lactate dehydrogenase showed the following features that distinguish it from the free form: (1) the lifetime in diluted solutions increases from 30 min (without capsules) to 1-2 days (in capsules); (2) a higher stability to basic denaturation (up to pH 10); and (3) the absence of substrate inhibition of enzyme in the polyelectrolyte complex. The changes in the catalytic characteristics of incapsulated lactate dehydrogenase are discussed in terms of an increase in effective pK values of amino acid perturbed by polyelectrolyte coating of enzyme.

Animals↗