Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Poly T”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76Linked to original sources
PubMed1999

Physical properties of solid molecular dispersions of indomethacin with poly(vinylpyrrolidone) and poly(vinylpyrrolidone-co-vinyl-acetate) in relation to indomethacin crystallization.

PURPOSE: To measure solid-state features of amorphous molecular dispersions of indomethacin and various molecular weight grades of poly(vinylpyrrolidone), PVP, and poly(vinylpyrrolidone-co-vinylacetate), PVP/VA, in relation to isothermal crystallization of indomethacin at 30 degrees C. METHODS: The glass transition temperatures (Tg) of molecular dispersions were measured using differential scanning calorimetry (DSC). FT-IR spectroscopy was used to investigate possible differences in interactions between indomethacin and polymer in the various dispersions. The enthalpy relaxation of 5%w/w and 30%w/w polymer dispersions was determined following various aging times. Quantitative isothermal crystallization studies were carried out with pure indomethacin and 5%w/w polymers in drug as physical mixtures and molecular dispersions. RESULTS: All coprecipitated mixtures exhibited a single glass transition temperature. All polymers interacted with indomethacin in the solid state through hydrogen bonding and in the process eliminated the hydrogen bonding associated with the carboxylic acid dimers of indomethacin. Molecular mobility at 16.5 degrees C below Tg was reduced relative to indomethacin alone, at the 5%w/w and 30%w/w polymer level. No crystallization of indomethacin at 30 degrees C was observed in any of the 5%w/w polymer molecular dispersions over a period of 20 weeks. Indomethacin alone and in physical mixtures with various polymers completely crystallized to the y form at this level within 2 weeks. CONCLUSIONS: The major basis for crystal inhibition of indomethacin at 30 degrees C at the 5%w/w polymer level in molecular dispersions is not related to polymer molecular weight and to the glass transition temperature, and is more likely related to the ability to hydrogen bond with indomethacin and to inhibit the formation of carboxylic acid dimers that are required for nucleation and growth to the gamma crystal form of indomethacin.

Calorimetry, Differential Scanning↗
PubMed1999

A heterogeneously structured composite based on poly(lactic-co-glycolic acid) microspheres and poly(vinyl alcohol) hydrogel nanoparticles for long-term protein drug delivery.

PURPOSE: To prepare a heterogeneously structured composite based on poly (lactic-co-glycolic acid) (PLGA) microspheres and poly(vinyl alcohol) (PVA) hydrogel nanoparticles for long-term protein drug delivery. METHODS: A heterogeneously structured composite in the form of PLGA microspheres containing PVA nanoparticles was prepared and named as PLGA-PVA composite microspheres. A model protein drug, bovine serum albumin (BSA), was encapsulated in the PVA nanoparticles first. The BSA-containing PVA nanoparticles was then loaded in the PLGA microspheres by using a phase separation method. The protein-containing PLGA-PVA composite microspheres were characterized with regard to morphology, size and size distribution, BSA loading efficiency, in vitro BSA release, and BSA stability. RESULTS: The protein-containing PLGA-PVA composite microspheres possessed spherical shape and nonporous surface. The PLGA-PVA composite microspheres had normal or Gaussian size distribution. The particle size ranged from 71.5 microm to 282.7 microm. The average diameter of the composite microspheres was 180 microm. The PLGA-PVA composite microspheres could release the protein (BSA) for two months. The protein stability study showed that BSA was protected during the composite microsphere preparation and stabilized inside the PLGA-PVA composite microspheres. CONCLUSIONS: The protein-containing PLGA-PVA composite may be suitable for long-term protein drug delivery.

Biocompatible Materials↗
PubMed1993

Analysis of micelle formation of an adriamycin-conjugated poly(ethylene glycol)-poly(aspartic acid) block copolymer by gel permeation chromatography.

The micelle-forming behavior of a drug-block copolymer conjugate (adriamycin-conjugated poly(ethylene glycol)-poly(aspartic acid) block copolymer; PEG-P[Asp(ADR)]) was analyzed by gel permeation chromatography (GPC). Four compositions of the conjugates were observed to form micellar structures in aqueous media, and their micelle-forming behavior was found to be dependent on the composition and media. These micelles did not reach equilibrium within short time periods like low molecular weight surfactants. One composition formed stable micelles in the presence of serum.

Animals↗
PubMed1992

Biodegradable pseudolatexes: the chemical stability of poly(D,L-lactide) and poly(epsilon-caprolactone) nanoparticles in aqueous media.

Pseudolatexes of the biodegradable polyesters poly(D,L-lactide) (PLA) and poly(epsilon-caprolactone) (PCL) have been developed as potential aqueous coatings for sustained release. Since PLA and PCL are known to hydrolyze, the influence of the surfactant system, temperature, pH, and particle size on the chemical stability of the polymers as aqueous colloidal dispersions was investigated. Pseudolatexes of PLA and PCL formulated with a nonionic surfactant system were the most stable. When these dispersions were stored in unbuffered media for 350 days at 5 degrees C, only small changes in the weight-average molecular weights (Mw) of the polymers were observed. At 37 degrees C there was rapid degradation of both polymers in the dispersions. Arrhenius plots for the degradation of PLA and PCL resulted in a linear relationship for PCL. The nonlinear relationship for PLA was attributed to the polymer being in two different physical states within the 5 to 37 degrees C range which was used for the Arrhenius plots. PCL was in the rubbery state at all temperatures studied. Storage of the pseudolatexes in pH 1.65 buffer at 37 degrees C catalyzed the rates of degradation of both PLA and PCL. However, refrigeration of the pseudolatexes stabilized the polymers even at pH 1.65 for up to 4 months. Particle size had an insignificant effect on PLA and PCL stability in pseudolatexes prepared with either a nonionic or an anionic surfactant system.

Calorimetry, Differential Scanning↗
PubMed2004

Particle formation and aggregation-collapse behavior of poly(N-isopropylacrylamide) and poly(ethylene glycol) block copolymers in the presence of cross-linking agent.

The effect of feed molar ratio of N-isopropylacrylamide (NIPAM) to poly(ethylene oxide) (PEO) on the particle formation of poly(N-isopropylacrylamide) (PNIPAM) and PEO block copolymers (PNIPAM-b-PEO) and their aggregation-collapse behavior have been studied in aqueous solutions. It is found that in the presence of cross-linking agent N,N'-methylenebisacryla-mide (BIS), different morphologies of PNIPAM-b-PEO copolymers can be obtained, including a grafting-like structure, a hemispherical core-shell structure and a well-defined core-shell nanoparticle, as the feed molar amount of NIPAM in the copolymerization is increased. The increase in temperature causes the self-aggregation of grafting-like copolymers and hemispherical particles due to the hydrophobic interaction between locally unshielded PNIPAM blocks prior to the conformational transition of PNIPAM. When the feed molar ratio of NIPAM to PEO exceeds a certain value, a well-defined core-shell nanoparticle can be produced during the copolymerization. At low concentrations, PNIPAM cores of single core-shell nanoparticles can undergo the conformational transition without aggregation. The increase in the concentration of the well-defined core-shell nanoparticles, however, results in a week aggregation at temperatures lower than the theta-temperature of pure PNIPAM due to the association of methyl groups at the periphery of PEO shells.

Acrylic Resins↗
PubMed2003

Novel polymeric micelles of amphiphilic triblock copolymer poly (p-dioxanone-co-L-lactide)-block-poly (ethylene glycol).

PURPOSE: The objective of this study is to characterize the micelles of novel block copolymer of poly (p-Dioxanone-co-L-Lactide)-block-Poly (ethylene glycol) (PPDO/PLLA-b-PEG-) and evaluate its ability to induce gene transfection. METHODS: The ability of the block copolymer to self-assemble was determined by viscometery, dye solublization, NMR spectra and dynamic light scattering. The Trypan blue assay for in vitro biocompatibility of the block copolymer was carried out with NIH 3T3, CT-26 and MCF-7 cells, and beta-glactosidase assay was applied to measure the transfection efficiency of the block copolymer on MCF-7 breast cancer cell. RESULTS: Depending on the block lengths and molecular weights, solubility of the polymeric samples in water was varied. Diluted aqueous solution properties of the copolymer were studied. 1,6-Diphenyl-1,3,5-hexatriene solubilization and 1H NMR spectra carried out in CDCl3 and D2O, were used to prove the existence of hydrophobic domains as the core of micelle. Average particle size of 60-165 nm with low polydispersity, and lower negative zeta potential of -3 to -14 mV were observed on the aqueous copolymer dispersion. Copolymer was found with almost no cytotoxic effect and was able to promote the transfection efficiency (about 3-fold) in MCF-7 cells. CONCLUSIONS: The PPDO/PLLA-b-PEG copolymer has ability to assemble into nanoscopic structures in aqueous environment, which enable to enhance gene transfection.

Animals↗
PubMed2004

Preparation and drug loading of poly(ethylene glycol)-block-poly(epsilon-caprolactone) micelles through the evaporation of a cosolvent azeotrope.

PURPOSE: The aim of this work was to study the assembly, drug loading, and stability of poly(ethylene glycol)-block-poly(epsilon-caprolactone) (PEG-b-PCL) micelles. METHODS: Three PEG-b-PCL compositions with PCL number average molecular weights of 1000, 2500, and 4000 g/mol were used. The assembly of PEG-b-PCL micelles, induced by the addition of water to acetonitrile (ACN), was characterized with 1H nuclear magnetic resonance spectroscopy (1H-NMR) and dynamic light scattering (DLS) with and without the presence of fenofibrate, a poorly water-soluble drug. PEG-b-PCL micelles with encapsulated fenofibrate were prepared through the removal of a negative ACN-water azeotrope under reduced pressure. Fenofibrate content was measured using reverse-phase high-performance liquid chromatography (HPLC), whereas the kinetic stability of PEG-b-PCL micelles with and without encapsulated fenofibrate was evaluated using size exclusion chromatography (SEC). RESULTS: The critical water content (CWC), the water content at which amphiphilic block copolymer (ABC) micelle assembly begins, was determined using DLS and ranged from 10% to 30% water, depending on both PCL molecular weight and PEG-b-PCL concentration. As the water content was increased, the PEG-b-PCL unimers assembled into swollen structures with hydrodynamic diameters ranging from 200 to 800 nm. The 1H-NMR peaks associated with the PCL block exhibited line-broadening, following the addition of D2O, indicating that the PCL blocks reside in the core of the PEG-b-PCL micelle. With further addition of water, the PCL cores collapsed to form fairly monodisperse PEG-b-PCL micelles (20-60 nm). In the presence of fenofibrate, the CWC value was lowered, perhaps due to hydrophobic interactions of fenofibrate and the PCL block. Further addition of water and subsequent evaporation of the negative ACN-water azeotrope resulted in fenofibrate-loaded PEG-b-PCL micelles of under 50 nm. The extent of fenofibrate encapsulation was dependent on PCL block size. At a polymer concentration of 1.0 mg/ml, PEG-b-PCL (5000:4000) and (5000:2500) micelles could encapsulate more than 90% of the initial loading level of fenofibrate, whereas PEG-b-PCL (5000:1000) micelles encapsulate only 28%. SEC experiments revealed that PEG-b-PCL (5000:4000) and (5000:2500) micelles eluted intact, indicating kinetic stability, whereas PEG-b-PCL (5000:1000) micelles eluted primarily as unimers. CONCLUSIONS: PEG-b-PCL in ACN assembles with fenofibrate into drug-loaded polymeric micelles with the addition of water and the subsequent removal of a negative ACN-water azeotrope.

Chemistry, Pharmaceutical↗
PubMed2006

Amphiphilic triblock copolymer poly(p-dioxanone-co-L-lactide)-block-poly(ethylene glycol), enhancement of gene expression and inhibition of lung metastasis by aerosol delivery.

We describe the development of an aerosol system for topical gene delivery to the lungs of C57BL/6 mice. This system is based on the combination of the commercial cationic lipid Lipofectin with a novel amphiphilic triblock copolymer, poly(p-dioxanone-co-L-lactide)-block-poly(ethylene glycol) (PPDO/PLLA-b-PEG, and abbreviated in the text as polymeric micelles). After optimizing conditions for DNA delivery to the lungs of mice using the combination of polymeric micelles with Lipofectin and LacZ DNA, we used the Lipofectin/polymeric micelle system to deliver the tumor suppressor gene PTEN to the lungs of C57BL/6 mice bearing the B16-F10 melanoma. Lipofectin/PTEN/polymeric micelles significantly improved gene expression of PTEN in the lungs of mice with no evidence of cell toxicity or acute inflammation. Importantly, lung metastasis, as measured by lung weight, was significantly reduced (P<0.001), as were total tumor foci in the lungs (P<0.001) and size of individual tumor nodules in animals treated with Lipofectin/PTEN/polymeric micelles compared with control animals. Survival time was also extended. These results suggest that the Lipofectin/polymeric micelle system is appropriate for enhancing gene delivery in vivo and that it can be applied as a non-invasive gene therapy for lung cancer.

Aerosols↗
PubMed2003

Poly(dimethylsiloxane) electrospray devices fabricated with diamond-like carbon-poly(dimethylsiloxane) coated SU-8 masters.

This study presents coupling of a poly(dimethylsiloxane) (PDMS) micro-chip with electrospray ionization-mass spectrometry (ESI-MS). Stable electrospray is generated directly from a PDMS micro-channel without pressure assistance. Hydrophobic PDMS aids the formation of a small Taylor cone in the ESI process and facilitates straightforward and low-cost batch production of the ESI-MS chips. PDMS chips were replicated with masters fabricated from SU-8 negative photoresist. A novel coating, an amorphous diamond-like carbon-poly(dimethylsiloxane) hybrid, deposited on the masters by the filtered pulsed plasma arc discharge technique, improved significantly the lifetime of the masters in PDMS replications. PDMS chip fabrication conditions were observed to affect the amount of background peaks in the MS spectra. With an optimized fabrication process (PDMS curing agent/silicone elastomer base ratio of 1/8 (w/w), curing at 70 degree C for 48 h) low background spectra were recorded for the analytes. The performance of PDMS devices was examined in the ESI-MS analysis of some pharmaceutical compounds and amino acids.

Arginine↗
PubMed2005

Self-nucleation and crystallization kinetics of double crystalline poly(p-dioxanone)-b-poly(epsilon-caprolactone) diblock copolymers.

The crystallization kinetics of each constituent of poly(p-dioxanone)-b-poly(epsilon-caprolactone) diblock copolymers (PPDX-b-PCL) has been determined in a wide composition range by differential scanning calorimetry and compared to that of the equivalent homopolymers. Spherulitic growth rates were also measured by polarized optical microscopy while atomic force microscopy was employed to reveal the morphology of one selected diblock copolymer. It was found that crystallization drives structure formation and both components form lamellae within mixed spherulitic superstructures. The overall isothermal crystallization kinetics of the PPDX block at high temperatures, where the PCL is molten, was determined by accelerating the kinetics through a previous self-nucleation procedure. The application of the Lauritzen and Hoffman theory to overall growth rate data yielded successful results for PPDX and the diblock copolymers. The theory was applied to isothermal overall crystallization of previously self-nucleated PPDX (where growth should be the dominant factor if self-nucleation was effective) and the energetic parameters obtained were perfectly matched with those obtained from spherulitic growth rate data of neat PPDX. A quantitative estimate of the increase in the energy barrier for crystallization of the PPDX block, caused by the covalently bonded molten PCL as compared to homo-PPDX, was thus determined. This energy increase can dramatically reduce the crystallization rate of the PPDX block as compared to homo-PPDX. In the case of the PCL block, both the crystallization kinetics and the self-nucleation results indicate that the PPDX is able to nucleate the PCL within the copolymers and heterogeneous nucleation is always present regardless of composition. Finally, preliminary results on hydrolytic degradation showed that the presence of relatively small amounts of PCL within PPDX-b-PCL copolymers substantially retards hydrolytic degradation of the material in comparison to homo-PPDX. This increased resistance to hydrolysis is a complex function of composition and its knowledge may allow future prediction of the lifetime of the material for biomedical applications.

Journal Article↗
PubMed2004

Synthesis of long Poly(dG).Poly(dC) DNA using enzymatic reaction.

Non-defect Poly(dG).Poly(dC) of 500 bp (170 nm) has been synthesized by using enzymatic reactions and was characterized by its UV spectrum, showing that conjugated pi-electrons between base pairs are spread over the DNA molecule suggesting the absence of structural defects.

DNA↗
PubMed2005

Thermally sensitive micelles self-assembled from poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide)-b-poly(D,L-lactide-co-glycolide) for controlled delivery of paclitaxel.

Thermally sensitive micelles self-assembled from poly(N-isopropylacrylamide-co- N,N-dimethylacrylamide)-b-poly(d,l-lactide-co-glycolide)[P(NIPAAm-co-DMAAm)-b-PLGA] are fabricated and used as a carrier for the controlled delivery of paclitaxel. Paclitaxel is efficiently loaded into the micelles by a membrane dialysis method. The lower critical solution temperature (LCST) of the micelles is 39.0 degrees C in PBS. Encapsulation efficiency and loading level of paclitaxel are affected by the initial loading level of paclitaxel, fabrication temperature and polymer composition. The blank and paclitaxel-loaded micelles are characterized by particle size analysis (DLS), morphology (TEM and AFM) and paclitaxel distribution (NMR, DSC and WAXRD). The micelles are spherical in shape, having an average size less than 130 nm. Paclitaxel is molecularly distributed within the core of micelles. Sustained release of paclitaxel is achieved, which is much faster at a temperature above the LCST than at the normal body temperature (37 degrees C). Cytotoxicity of free paclitaxel and paclitaxel-loaded micelles against a human breast carcinoma cell line (MDA-MB-435S) is studied at different temperatures. The cytotoxicity of the paclitaxol-loaded micelles is greater as compared to free paclitaxel. Enhanced cytotoxicity is achieved by the paclitaxol-loaded micelles when the environmental temperature increases slightly above the LCST. Paclitaxel-loaded P(NIPAAm-co-DMAAm)-b-PLGA micelles may provide a good formulation for cancer therapy.

Acrylamides↗
PubMed2001

Effectiveness of a new perforated 0.15 mm poly-p-dioxanon-foil versus titanium-dynamic mesh in reconstruction of the orbital floor.

Introduction: In recent years a new perforated PDS (poly-p-dioxanon) foil (0.15 mm) has become available and has not yet been proven to be successful in reconstruction of the orbital floor after blow-out-fractures in randomized studies. The main aim of this clinical trial is to compare this new PDS foil with titanium dynamic mesh (0.3 mm) (TD), which is well established in reconstruction of the orbital floor. Patients and Methods: In a prospective multicentre randomized trial, conducted between 1997 and 1998, out of 42 patients with fractures of the orbital floor, 28 patients needing material for reconstruction were randomized to receive either PDS foil or TD. In a comprehensive preoperative and postoperative protocol patients were monitored by the surgeon, radiologist and ophthalmologist with a postoperative follow-up of least 6 months. Results: Maximum defects of the orbital floor were comparable in both groups (PDS group: 13.3 mm, TD group: 13.9 mm). In both groups the surgical procedure was well tolerated, and functional and cosmetic results were evaluated as satisfactory by all patients. Ophthalmological evaluation, performed up to 6 months postoperatively, revealed double vision or vertical strabismus in nine patients (five PDS group, four titanium group). This was not confirmed subjectively in each single patient. Also ex- or enophthalmos, registered in seven patients of the PDS and four of the TD group (mainly +/-1 mm) were not considered as relevant by the patients. Conclusion: The new 0.15 mm perforated PDS foil was comparable to 0.3 mm titanium mesh concerning functional and cosmetic outcome. Obviously, persisting ophthalmometric disorders were compensated very well in both groups. PDS foil is felt to be the preferred material since it is bioresorbable and more convenient to handle. Copyright 2001 European Association for Cranio-Maxillofacial Surgery.

Journal Article↗
PubMed2003

[In vitro culture of cells from respiratory mucosa on foils of collagen, poly-L-lactide (PLLA) and poly-3-hydroxy-butyrate (PHB)].

BACKGROUND: The replacement of respiratory mucosa after surgical resections at different locations in the ENT-field (trachea, nasal septum, sinus maxillaris) seems to be essential or at least of great benefit for patients. Presently a satisfying solution for this challenge does not exist. Therefore we have analysed the growth of cells from respiratory mucosa on different matrices. METHODS: Cell cultures are initiated mainly by growing out cells from tissue pieces but also by seeding of cells after enzymatic dissociation (sequential trypsinization) of mucosa. Cells were cultured with serum-containing and serum-free media on 3 different foils: made of collagen, of Poly-L-lactic acid (PLLA) and Poly-hydroxybutyric acid (PHB). Culturing time was on average about 4 - 5 weeks. RESULTS: On all tested materials fibroblasts and epithelial cells have grown in principle. PLLA was the material with best properties concerning the aim of this study whereas culturing of cells on PHB only happens after surface modification by amino-functionalisation with plasma treatment. Visualisation of cells on materials of collagen could not realised by light-microscopy due to the 3-dimensional structure and the optical properties of this material. Here the cultures were analysed by cell membrane staining and by REM. We could not find a differentiation of epithelial cells with beating cilia 6 weeks after starting the culture. However 20 days after starting the culture on PLLA (good conditions for observation with light-microscope) cells with beating cilia could be observed, in our opinion resulting from dissociated cells from tissue pieces and not from proliferated cells. CONCLUSIONS: In principle the analysed materials are useful for the culturing of cells from respiratory mucosa. However, for obtaining differentiated epithelial cells the culture conditions have to be modified.

Cell Adhesion↗
PubMed2005

Dynamics of a poly(ethylene oxide) tracer in a poly(methyl methacrylate) matrix: remarkable decoupling of local and global motions.

The tracer diffusion coefficient of unentangled poly(ethylene oxide) (PEO, M=1000 gmol) in a matrix of poly(methyl methacrylate) (PMMA, M=10 000 gmol) has been measured over a temperature range from 125 to 220 degrees C with forced Rayleigh scattering. The dynamic viscosities of blends of two different high molecular weight PEO tracers (M=440 000 and 900 000 gmol) in the same PMMA matrix were also measured at temperatures ranging from 160 to 220 degrees C; failure of time-temperature superposition was observed for these systems. The monomeric friction factors for the PEO tracers were extracted from the diffusion coefficients and the rheological relaxation times using the Rouse model. The friction factors determined by diffusion and rheology were in good agreement, even though the molecular weights of the tracers differed by about three orders of magnitude. The PEO monomeric friction factors were compared with literature data for PEO segmental relaxation times measured directly with NMR. The monomeric friction factors of the PEO tracer in the PMMA matrix were found to be from two to six orders of magnitude greater than anticipated based on direct measurements of segmental dynamics. Additionally, the PEO tracer terminal dynamics are a much stronger function of temperature than the corresponding PEO segmental dynamics. These results indicate that the fastest PEO Rouse mode, inferred from diffusion and rheology, is completely separated from the bond reorientation of PEO detected by NMR. This result is unlike other blend systems in which global and local motions have been compared.

Journal Article↗
PubMed2006

Theoretical study of ion desorption from poly-(methyl methacrylate) and poly-(isopropenyl acetate) thin films through core excitation.

Site-specific chemical reactions following core excitation of poly-(methyl methacrylate) (PMMA) and poly-(isopropenyl acetate) (PiPAc) thin films were investigated. New x-ray absorption spectra of PMMA and PiPAc at the C and O K edges and theoretical spectra within the framework of density functional theory using model molecules were reported, and some new peak assignments were proposed for these spectra. Core-hole excited state molecular dynamics simulations were performed to discuss dissociation dynamics for the target systems, and some specific reaction mechanisms were discussed and explained theoretically; for example, the amount of CH3 ion fragments for PMMA was enhanced at the C and O K edges through the existence of the repulsive sigma*(O-CH3) excited state.

Journal Article↗
PubMed2006

The effect of broken conjugation on the excited state: ether linkage in the cyano-substituted poly(p-phenylene vinylene) conjugated polymer poly(2,5,2',5'-tetrahexyloxy-8,7'-dicyano-di-p-phenylene vinylene).

We investigate the effect of broken conjugation on the excited state dynamics of excimers in cyano-substituted phenylene-vinylene polymers. We compare previous studies on the well-characterized poly(2,5,2',5'-tetrahexyloxy-8,7'-dicyano-di-p-phenylene vinylene) (CN-PPV) with poly[oxa-1,4-phenylene-1,2-(1-cyano)-ethenylene-2,5-dioctyloxy-1,4-phenylene-1,2-(2-cyano)-ethenylene-1,4-phenylene] (CN-ether-PPV), in which the conjugation is disrupted by the insertion of an oxygen atom within the polymer backbone. Despite the broken conjugation, the spectroscopic behavior of the two materials is similar, indicating that the cyano group dominates the photophysics in these materials. The emission in CN-ether-PPV is due to a single-chain exciton in solution and due to an interchain excimer in thin film, as previously reported for CN-PPV; however, the excimer absorption and emission in thin film are blueshifted by approximately 0.2 eV relative to CN-PPV, implying that the excimer in CN-ether-PPV is less stable. Furthermore, substitution of an ether group along the chain results in decay times in both solution and film that are twice as long than in CN-PPV due to the broken conjugation which restricts the exciton within a conjugation segment and reduces its access to internal quenching sites. These properties result in a decay time of 14 ns for CN-ether-PPV film, one of the longest decay times observed in a conjugated polymer film. The long lifetime indicates a large exciton diffusion length, making these species particularly vulnerable to quenching by other materials. This work has implications for the design of conjugated polymers for efficient optoelectronic devices, such as photovoltaics.

Journal Article↗
PubMed2006

Unified model of association-induced lower critical solution temperature phase separation and its application to solutions of telechelic poly(ethylene oxide) and of telechelic poly(N-isopropylacrylamide) in water.

The authors present a model describing the coexistence of hydrophobic association and phase separation with lower critical solution temperature (LCST) in aqueous solutions of polymers carrying short hydrophobic chains at both chain ends (telechelic associating polymers). The LCST of these solutions is found to decrease along the sol/gel transition curve as a result of both end-chain association (association-induced phase separation) and direct hydrophobic interaction of the end chains with water. The authors relate the magnitude of the LCST decrease to a hydration cooperativity parameter sigma. The LCST decreases substantially (approximately 100 K) in the case of random hydration (sigma=1), whereas only a small shift (approximately 5-10 K) occurs in the case of cooperative hydration (sigma=0.3). The molecular weight dependence of the LCST drop is studied in detail in each case. The results are compared with experimental observations of the cloud points of telechelic poly(ethylene oxide) solutions, in which random hydration predominates, and of telechelic poly(N-isopropylacrylamide) solutions, in which cooperative hydration prevails.

Journal Article↗