Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “LIPASE”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76Linked to original sources

Effect of oxygen transfer on lipase production by Acinetobacter radioresistens.

The influence of oxygen on alkaline lipase production by Acinetobacter radioresistens was studied under two operating modes: controlled dissolved oxygen (DO) concentration and controlled aeration rate. Compared with cell growth, the lipase production depended more extensively on oxygen. The intrinsic factor determining cell growth and lipase production was oxygen transfer rate (OTR) rather than DO concentration. Improvements in OTR, either by aeration or agitation, resulted in an increase in lipase yield and/or a reduction in fermentation time. The formation of A. radioresistens lipase could be described by a mixed-growth-associated model, and the enzyme was mainly a growth-associated product. The overall productivity for the lipase, which depended more strongly on agitation than aeration, could be related with kLa. DO concentration could not be employed in this correlation, though it has been useful as a criterion for ensuring no oxygen limitation in an aerobic fermentation.

Acinetobacter↗

Optimization of Pseudomonas cepacia lipase preparations for catalysis in organic solvents.

The activity of different lipase (from Pseudomonas cepacia) forms, such as crude powder (crude PC), purified and lyophilized with PEG (PEG + PC), covalently linked to PEG (PEG-PC), cross-linked enzyme crystals (CLEC-PC), and immobilized in Sol-Gel-AK (Sol-Gel-AK-PC) was determined, at various water activities (aw), in carbon tetrachloride, benzene and 1,4-dioxane. The reaction of vinyl butyrate with 1-octanol was employed as a model and both transesterification (formation of 1-octyl butyrate) and hydrolysis (formation of butyric acid from vinyl butyrate) rates were determined. Both rates depended on the lipase form, solvent employed, and aw value. Hydrolysis rates always increased as a function of aw, while the optimum of aw for transesterification depended on the enzyme form and nature of the solvent. At proper aw, some lipase forms such as PEG + PC, PEG-PC, and Sol-Gel-AK-PC had a total activity in organic solvents (transesterification plus hydrolysis) which was close to (39 and 48%) or even higher than (130%) that displayed by the same amount of lipase protein in the hydrolysis of tributyrin-one of the substrates most commonly used as standard for the assay of lipase activity-in aqueous buffer. Instead, CLEC-PC and crude PC were much less active in organic solvents (2 and 12%) than in buffer. The results suggest that enzyme dispersion and/or proper enzyme conformation (favored by interaction with PEG or the hydrophobic Sol-Gel-AK matrix) are essential for the expression of high lipase activity in organic media.

Biotechnology↗

Kinetic resolution of amino acid esters catalyzed by lipases.

Racemic amino acids were resolved by lipase via hydrolysis of their esters. Lipases (Pseudomonas lipase from Amano PS, Rhizopus lipase from Serva, and porcine pancrease lipase from Sigma) could selectively hydrolyze the L-amino acid esters in aqueous solution with high reactivities and selectivities. The effect of the structural changes in the ester moiety on the stereoselectivity of the lipases was also investigated using D,L-homophenylalanine as a model. Procedures were developed for the resolution of natural and unnatural amino acids.

Amino Acids↗

Factors governing the activity of lyophilised and immobilised lipase preparations in organic solvents.

Active site titration and activity measurements were performed in hexane on lyophilised lipase preparations containing different amounts of phosphate buffer and lipase immobilised on porous polypropylene. Lyophilisation of Thermomyces lanuginosus lipase with large quantities of phosphate salts (200 mM) increased the specific activity fourfold, and the number of rapidly titratable active sites increased to 50 % from the 13 % observed when smaller amounts of phosphate buffer were used (20 mM) during lyophilisation. The phosphate buffer worked as an immobilisation matrix for the lipase, and the increase in specific activity was at least partly due to decreased mass transfer limitations. When lipase was immobilised on porous polypropylene, the specific activity was 770 times higher than that of the best freeze-dried preparation. At optimal enzyme loading, 93 % of the enzyme molecules were titrated at a high rate; this indicates that this adsorption on a hydrophobic surface was a very efficient means of reducing mass transfer limitations and of immobilising the enzyme in its active conformation for use in organic solvents. The variation in specific activity with water activity was found to correlate very well with the variation in titratable active sites when lipases from Burkholderia cepacia and Thermomyces lanuginosus were immobilised on porous polypropylene. The catalytic activity per competent active site was thus constant over the whole range of water activities.

Ascomycota↗

The role of lingual lipase in neonatal fat digestion.

Lingual serous glands (von Ebner) contain a potent lipase that hydrolyses triglycerides to a mixture of partial glycerides (di- and monoglycerides), glycerol and free fatty acids. Studies in man and in rat have shown that similar lipolytic activity is present in oesophageal and gastric aspirates and suggest that the intragastric digestion of dietary fat is initiated by lingual lipase. In the rat the lingual serous glands are initiated in 19- to 20-day fetuses; lipase activity is first detected in 20-day-old fetuses and increases 14-fold by birth. The data suggest that in the fetus lipase activity originates predominantly in the serous demilune cells of mucous glands whereas after birth the enzyme is synthesized and stored in the rapidly differentiating serous glands. In man lipolytic activity is present in gastric aspirates as early as 26 weeks of gestational age. Our studies suggest that the lipolytic activity has characteristics similar to those of adult human and rat lingual lipase; the enzyme is present in the oesophageal pouch of infants with oesophageal atresia indicating that in infants, as in adults, it probably originates in the lingual serous glands. Since the enzyme is active in the absence of bile salts and has a low pH optimum it is ideally suited to act in the stomach and probably compensates in the premature for low pancreatic lipase activity. The lipolytic activity could be important, not only in the digestion of dietary fat, but in helping to overcome the temporary bile salt deficiency and to solubilize dietary fat through the formation of amphiphilic reaction products.

Animals↗

Effect of water activity and immobilization on fatty acid selectivity for esterification reactions mediated by lipases.

The effect of water activity (a(w)) and immobilization on fatty acid (FA) selectivity of Burkholderia (formerly Pseudomonas) cepacia, Rhizomucor miehei, Candida antarctica (type B), and Candida rugosa lipases in esterification reactions was determined. Studies were based on measuring ester formation in multicompetitive reaction mixtures containing either the homologous series of even carbon number n-chain saturated FA (C4-C18) or a series of n-chain (un)saturated FA (C18:X, where X = 0-3 double bonds) as cosubstrates with 1,3-propanediol in ter-butyl methyl ether at a(w) of 0.19, 0.69, and 0.90. Activity and FA selectively patterns were similar for free and Celite-adsorbed lipases in response to changes in a(w'), although specific effects were observed for selectivity of B. cepacia and C. rugosa lipases toward C16 and C4/C6 FA, respectively. Also, selectivity toward unsaturated C18:X FA as a group was modulated by changes in a(w) for three of the four lipase studied. Resin-fixed lipases from R. miehei and C. antarctica exhibited profound differences in activity and FA selectively in response to changes in a(w'), relative to free and Celite-bound forms. These findings suggest that FA selectivity for lipid modification is influenced by a(w) and immobilization, but that each lipase has a characteristic response to these factors in a manner that cannot be predicted.

Anion Exchange Resins↗

Engineering of baker's yeasts, E. coli and Bacillus hosts for the production of Bacillus subtilis Lipase A.

Lipases are versatile biocatalists showing multiple applications in a wide range of biotechnological processes. The gene lipA coding for Lipase A from Bacillus subtilis was isolated by PCR amplification, cloned and expressed in Escherichia coli, Saccharomyces cerevisiae and Bacillus subtilis strains, using pBR322, YEplac112 and pUB110-derived vectors, respectively. Lipase activity analysis of the recombinant strains showed that the gene can be properly expressed in all hosts assayed, this being the first time a lipase from bacterial origin can be expressed in baker's S. cerevisiae strains. An important increase of lipase production was obtained in heterologous hosts with respect to that of parental strains, indicating that the described systems can represent a useful tool to enhance productivity of the enzyme for biotechnological applications, including the use of the lipase in bread making, or as a technological additive.

Bacillus subtilis↗

A lipid-coated lipase as an efficient hydrolytic catalyst in the two-phase aqueous-organic system.

A lipid-coated lipase has been known to be soluble in organic solvents and act as an efficient esterification catalyst in the dry organic solvent. It was also found to act as an efficient hydrolytic catalyst for lipophilic esters in the two-phase aqueous-organic system. Both the lipid-coated lipase and substrates are solubilized in the organic phase and the hydrolysis occurs with water molecules from the aqueous phase. Therefore, the reaction was 40-100 times faster than that of the native lipase, in which the enzyme and substrate exist separately in the aqueous and organic phase, respectively, and the reaction proceeded at the interface. The hydrolysis rates for the lipid-coated lipase were not affected by the aqueous pH and agitation speed of the two-phase. Enzymatic activity of the lipid-coated lipase was compared with that of the poly(ethylene glycol)-grafted lipase. Michaelis-Menten kinetics in the two-phase reactions was also studied.

Alcohols↗

Partially purified Carica papaya lipase: a versatile biocatalyst for the hydrolytic resolution of (R,S)-2-arylpropionic thioesters in water-saturated organic solvents.

With the hydrolytic resolution of (R,S)-naproxen 2,2,2-trifluoroethyl thioesters in water-saturated isooctane as a model system, improvements of the specific lipase activity and thermal stability were found when a crude Carica papaya lipase (CPL) was partially purified and employed as the biocatalyst. The partially purified Carica papaya lipase (PCPL) was furthermore explored as an effective enantioselective biocatalyst for the hydrolytic resolution of (R,S)-profen thioesters in water-saturated organic solvents. The kinetic analysis in water-saturated isooctane indicated that both acyl donor and acyl acceptor have profound influences on the lipase activity, E-value, and enantioselectivity. Inversion of the enantioselectivity from (S)- to (R)-thioester was found for (R,S)-fenoprofen and (R,S)-ketoprofen thioesters that contained a bulky substituent at the meta-position of 2-phenyl moiety of the acyl part. Kinetic constants for the acylation step were furthermore estimated for elucidating the kinetic data and postulating an active site model. The thermodynamic analysis indicated that the enantiomer discrimination was driven by the difference of activation enthalpy (DeltaDeltaH) and that of activation entropy (DeltaDeltaS), yet the latter was dominated for most of the reacting systems. The postulated active site model was supported from the variation of DeltaDeltaH and DeltaDeltaS with the acyl moiety, in which a good linear enthalpy-entropy compensation relationship was also illustrated. A comparison of the performances between Candida rugosa lipase (CRL) and PCPL indicated that PCPL was superior to CRL in terms of the better thermal stability, similar or better lipase activity for the fast-reacting substrate, time-course-stability, and lower enzyme cost.

Carica↗

Can an inactivating agent increase enzyme activity in organic solvent? Effects of 18-crown-6 on lipase activity, enantioselectivity, and conformation.

Lipase from Burkholderia cepacia (lipase BC) and lipase B from Candida antarctica (CALB) show an increase of the transesterification activity in toluene (up to 2.4- and 1.7-fold, respectively), when lyophilized with 18-crown-6. Nevertheless, the increase was observed only for low (less than 100) 18-crown-6/lipase molar ratio, while at higher ratios, the activity decreased for both enzymes to values lower than those obtained in the absence of the additive. In 1,4-dioxane, the activation is lower for lipase BC (1.7-fold) and for CALB (1.5-fold). Concerning enantioselectivity, tested in the kinetic resolution of 6-methyl-5-hepten-2-ol, only in the case of CALB, an effect of the additive (the E value varied from about 120 to 280) was observed. In water, 4% (w/w) of 18-crown-6 caused a loss of activity in the hydrolysis of p-nitrophenyl laurate of about 88 and 99.75%, compared to that observed in the absence of the crown ether for CALB and lipase BC, respectively. These data and the conformational analysis of both lipases, carried out by FT/IR spectroscopy indicate that the enzyme inactivation in water and in organic solvents at 18-crown-6/lipase molar ratios, higher than 100 might be due to conformational changes caused by the additive. Instead, at molar ratios lower than 100, 18-crown-6 might increase the activity - particularly, in toluene - thanks to the fact that in its presence, the enzyme has an hydrogen bonds pattern, more similar to that in water. This suggests that the additive would be able to provide the enzyme with more water.

Burkholderia cepacia↗

Electric field control of lipase membrane activity.

Lipase (EC 3.1.1.3., from Pseudomonas sp.) was entrapped in collagen membrane containing liquid crystal (4-methoxybenzilidene-4'-n-butylaniline). The activity of the lipase-liquid crystal membrane at an applied voltage of 4 V was 3.4 compared to a membrane tested without imposition of an external electric field. A linear relationship was observed between the activity of the lipase-liquid crystal membrane and the current. The apparent Michaelis constant (K'm) of the lipase-liquid crystal membrane under electric field was identical to that of the membrane under ordinary condition. Activation of the lipase-liquid crystal membrane was observed repeatedly, i.e., activation in the presence of an electric field and reversion to a basal level upon removal of the field occurred cyclically. Activity control of immobilized enzymes is desirable for switching devices of a bioreactor. Possible mechanisms of the lipase activation by electric field are discussed.

Collagen↗

Functional cell-surface display of a lipase-specific chaperone.

Lipases are important enzymes in biotechnology. Extracellular bacterial lipases from Pseudomonads and related species require the assistance of specific chaperones, designated "Lif" proteins (lipase specific foldases). Lifs, a unique family of steric chaperones, are anchored to the periplasmic side of the inner membrane where they convert lipases into their active conformation. We have previously shown that the autotransporter protein EstA from P. aeruginosa can be used to direct a variety of proteins to the cell surface of Escherichia coli. Here we demonstrate for the first time the functional cell-surface display of the Lif chaperone and FACS (fluorescence-activated cell sorting)-based analysis of bacterial cells that carried foldase-lipase complexes. The model Lif protein, LipH from P. aeruginosa, was displayed at the surface of E. coli cells. Surface exposed LipH was functional and efficiently refolded chemically denatured lipase. The foldase autodisplay system reported here can be used for a variety of applications including the ultrahigh-throughput screening of large libraries of foldase variants generated by directed evolution.

Biochemistry↗

Comparison of non-diglyceride- and diglyceride-based assays for pancreatic lipase activity.

Pancreatic lipase is produced and stored in pancreatic acinar cells, and is normally secreted into the duct system. In disorders that cause pancreatic damage, pancreatic lipase enters the circulation, and serum lipase activity becomes useful in the diagnosis and evaluation of pancreatitis. During the last decade, many lipase assays have used the Imamura method, in which a series of enzymatic reactions utilizing a diglyceride substrate leads to the formation of a colorimetrically detected product. Historically, this method has been prone to significant interference from various substances, including glycerol itself. In the light of these limitations, we evaluated an automated enzymatic rate assay that uses a non-diglyceride-based, pancreatic lipase-specific substrate. Precision, linearity, and potential interference were assessed, and when compared to the Imamura method, the non-diglyceride-based assay exhibited a slope of 0.475, y-intercept of 15.89, r-value of 0.9516, and S(y,x) of 12.96. Similar results were also observed when the two assays were compared using samples with markedly elevated creatinine levels. Between-day coefficients of variance (CVs) ranged from 5.0% to 5.5%, which compared well with the diglyceride-based method, and linearity spanned a range of 3-156 U/L. Evaluation of over 2,000 patient results collected during a 6-month period suggested that the manufacturer's upper reference limit of 51 U/L may be too conservative. No significant interference was identified with bilirubin, triglyceride, or glycerol itself, and significant interference from hemoglobin was observed only at concentrations of 116 mg/dL or greater. As a result, the non-diglyceride-based method provides an acceptable alternative for the routine laboratory measurement of lipase activity.

Clinical Laboratory Techniques↗

An extracellular lipase from the dimorphic yeast Arxula adeninivorans: molecular cloning of the ALIP1 gene and characterization of the purified recombinant enzyme.

The lipase-encoding Arxula adeninivorans ALIP1 gene was isolated using fragments of lipase isolates obtained by trypsin digestion for the definition of oligonucleotide primers in a PCR screening approach. The gene harbours an ORF of 1347 bp encoding a 420 amino acid protein of some 50 kDa preceded by an N-terminal 28 prepro-secretion sequence. The deduced amino acid sequence was found to be similar to the lipases from Candida albicans and C. parapsilosis (34-38% identity) and more distantly related to other lipases. The sequence contains the consensus pentapeptide motif (-Gly-X-Ser-X-Gly-) that forms a part of the interfacial lipid recognition site in lipases. The expression of the gene is regulated by carbon source. In media supplemented with Tween 20, induction of the ALIP1 gene and accumulation of the encoded lipase in the medium is observed, thus demonstrating gene regulation by lipophilic compounds. The enzyme characteristics are analysed from isolates of native strains as well as from those of recombinant strains expressing the ALIP1 gene under control of the strong A. adeninivorans-derived TEF1 promoter. For both proteins a molecular mass of 100 kDa was determined, indicating a dimeric structure, a pH optimum at pH 7.5 and a temperature optimum at 30 degrees C. The enzyme hydrolyses all ester bonds in all triglyceride substrates tested. Middle-sized chain fatty acids are more efficiently hydrolysed than short- and long-chain fatty acids, with the highest activity on C8/C10 fatty acid esters pNP-caprylate, pNP-caprate and tricaprylin.

Amino Acid Sequence↗

Recombinant expression and characterization of the Candida rugosa lip4 lipase in Pichia pastoris: comparison of glycosylation, activity, and stability.

Although Candida rugosa utilizes a nonuniversal serine codon (CUG) for leucine, it is possible to express lipase genes (LIP) in heterologous systems. After replacing the 19 CUG codons in LIP4 with serine codons by site-directed mutagenesis, a recombinant LIP4 was functionally overexpressed in Pichia pastoris in this study. This recombinant glycosylated lipase was secreted into the culture medium with a high purity of 100 mg/liter in a culture broth. Purified recombinant LIP4 had a molecular mass of 60 kDa, showing a range similar to that of lipase in a commercial preparation. Since LIP4 has only a glycosylation site at position Asn-351, this position may also be the major glycosylation site in C. rugosa lipases. Although the thermal stability of recombinant LIP4 significantly increased from 52 to 58 degrees C after glycosylation, there were no significant differences in the catalytic properties of recombinant glycosylated lipase from P. pastoris and the unglycosylated one from Escherichia coil. These two recombinant LIP4s showed higher esterase activities toward long-chain ester (C16 and C18) and exhibited higher lipase activities toward unsaturated and long-chain lipids. In addition, LIP4 does not show interfacial activation as compared with LIP1 toward lipid substrates of tributyrin and triolein. These observations demonstrated that LIP4 shows distinguished catalytic activities with LIP1 in spite of their high sequence homology.

Candida↗

Matrix-assisted ultraviolet laser desorption/ionization mass spectrometry applied to multiple forms of lipases.

Matrix-assisted ultraviolet laser desorption/ionization mass spectrometry was used to investigate heterogeneous patterns and molecular masses of microbial lipases from Penicillium camembertii, Geotrichum candidum, and Pseudomonas sp. Mass spectral peaks of the native, glycosylated lipases from P. camembertii and G. candidum were broader than those of the corresponding deglycosylated enzymes, indicative of heterogeneous glycosylations. The broader peaks in the mass spectra were caused by an overlapping of unresolved peaks, derived from single glycoprotein species. Molecular masses determined for the deglycosylated proteins were in excellent agreement with those deduced from amino acid composition and sequence data, whereas with conventional biochemical methods (gelfiltration, sodium dodecyl sulfate-polyacrylamide gel electrophoresis) only very rough estimations of molecular masses were possible. By mass spectrometric analysis of the four fractions of chromatographically separated P. camembertii lipase molecular masses of 29,990, 34,030, 31,990, and 32,140 Da were found before and 29,960, 29,980, 29,990 and 30,010 Da, respectively, after deglycosylation. Thus from the four native fractions of P. camembertii lipase three were glycoproteins. G. candidum lipase showed an average molecular mass of 63,500 Da for the heterogeneously deglycosylated native form and a molecular mass of 59,650 Da for the deglycosylated enzyme. For the Pseudomonas lipase, which could only be isolated with lipids firmly attached, a molecular mass of 32,890 Da was determined, in close agreement with that derived from the cDNA sequence.

Bacterial Proteins↗

High-level production of recombinant Geotrichum candidum lipases in yeast Pichia pastoris.

We describe the heterologous high-level expression of the two Geotrichum candidum lipase (GCL) isoenzymes from strain ATCC 34614 in the methylotrophic yeast Pichia pastoris. The lipase cDNAs were placed under the control of the methanol-inducible alcohol oxidase promoter. The lipases expressed in P. pastoris were fused to the alpha-factor secretion signal peptide of Saccharomyces cerevisiae and were secreted into the culture medium. Cultures of P. pastoris expressing lipase accumulated active recombinant enzyme in the supernatant to levels of approximately 60 mg/L virtually free from contaminating proteins. This yield exceeds that previously reported with S. cerevisiae by a factor of more than 60. Recombinant GCL I and GCL II had molecular masses of approximately 63 and approximately 66 kDa, respectively, as determined by SDS-PAGE. The result of endoglucosidase H digestion followed by Western blot analysis of the lipases suggested that the enzymes expressed in P. pastoris received N-linked high-mannose-type glycosylation to an extent, 6-8% (w/w), similar to that in G. candidum. The specific activities and substrate specificities of both recombinant lipases were determined and were found to agree with what has been reported for the enzymes isolated from the native source.

Cloning, Molecular↗

Human pancreatic triglyceride lipase expressed in yeast cells: purification and characterization.

A cDNA clone encoding human pancreatic triglyceride lipase was cloned into a yeast expression vector so that the yeast PHO1 signal peptide replaced the native signal peptide. Pichia pastoris cells were transfected with the vector, and clones expressing human pancreatic triglyceride lipase were isolated. Recombinant human pancreatic lipase was expressed in broth cultures and was purified from the medium by DEAE blue Sepharose and hydroxyapatite chromatography. The highly purified lipase had specific activities for various triglyceride substrates identical to those of tissue-purified human pancreatic triglyceride lipase; it was inhibited by bile salts, required colipase for activity, and demonstrated interfacial activation. This expression system is suitable for the rapid, efficient production of human pancreatic triglyceride lipase in amounts adequate for biophysical studies.

Amino Acid Sequence↗