Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “LIGNIN”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76Linked to original sources

Gravity and land plant evolution: experimental induction of lignification by simulated hypergravity and water stress.

The ability to lignify cell walls has long been associated with the upright condition and sometimes massive body of the land plant, and gravitational regulation of lignification has been demonstrated by clinostat/centrifuge techniques. Previous centrifuge experiments were conducted using plants in the early stages of growth, hence already programmed for immediate lignification. Elodea, an aquatic Angiosperm long believed to be incapable of lignification synthesizes lignin or lignin-like phenolics during 6 days incubation at 80 g . Yields in some cases exceeded stationary controls by as much as 300%. Supporting data were obtained using bean cotyledons. Exposure to 80 g induced lignification in extra-vascular tissue along with vascular lignin deposits. The loss of a buoyant medium also deprived early land plants of unlimited water: the lignin content in cucumber seedlings grown in water is reduced 50% or more relative to pot grown plants but water stress elevates lignin content as much as 100%. This suggests that the water status of the land environment may have provided a "backup" or "reinforcement" signal for an adaptive axial support system.

Biological Evolution↗

Effect of inoculation in composting processes: modifications in lignocellulosic fraction.

Three microbial isolates, identified as Bacillus shackletonni, Streptomyces thermovulgaris and Ureibacillus thermosphaericus were tested as inoculants in composting processes in relation to their capacity to improve lignocellulose degradation. Different wastes from agricultural activities were used as raw material for the heaps: pepper plant waste (PPW) as the main component and olive-oil mill waste (OMW), almond shell (AS), pruning waste (PW) and rice straw (RS) as additives. Cellulose was more extensively degraded than hemicellulose and lignin, although the use of inoculants (B. shackletonni and S. thermovulgaris) improved the action of the autochthonous microbiota just in the AS heaps. A higher efficiency was observed for lignin, since lower concentrations of this polymer were detected in the inoculated heaps in relation to control heaps. U. thermosphaericus was the most efficient microorganism since inoculation with this strain decreased the final lignin content in a range between 17.23% and 24.34%. S. thermovulgaris and B. shackletonni led to a higher reduction of the lignin levels in the OMW and PW heaps (14.25% and 19.07% less lignin than control heaps) and OMW (13%), respectively. The composting process can therefore be improved by means of inoculation if the microorganisms used for this purpose are appropriate for the characteristics of the raw material.

Agriculture↗

Pretreatment of corn stover by aqueous ammonia.

Corn stover was pretreated with aqueous ammonia in a flow-through column reactor, a process termed ammonia recycled percolation (ARP). This method was highly effective in delignifying of the biomass, reducing the lignin content by 70-85%. Most lignin removal occurred within the first 20 min of the process. Lignin removal by ARP was further confirmed by FTIR analysis and lignin staining. The ARP process solubilized 40-60% of the hemicellulose but left the cellulose intact. The solubilized carbohydrate existed in oligomeric form. Carbohydrate decomposition during the pretreatment was insignificant. Corn stover treated for 90 min exhibited enzymatic digestibility of 99% with 60 FPU/g of glucan enzyme loading, and 92.5% with 10 FPU/g of glucan. The digestibility of ARP treated corn stover was substantially higher than that of alpha-cellulose. The enzymatic digestibility was related with the removal of lignin and hemicellulose, perhaps due to increased surface area and porosity. The SEM pictures indicated that the biomass structure was deformed and its fibers exposed by the pretreatment. The crystallinity index increased with pretreatment reflecting removal of the amorphous portion of biomass. The crystalline structure of the cellulose in the biomass, however, was not changed by the ARP treatment.

Ammonia↗

Yellowing and IR-changes of spruce wood as result of UV-irradiation.

The yellowing and IR-changes of spruce wood as a result of UV-irradiation were studied using two different types of xenon lamps (lambda>300 nm; I(o)=50 mW cm(-2) and lambda>280 nm; I(o)=17.5 mW cm(-2)). Changes in the IR spectra as well as the yellowing of the irradiated wood surfaces show the influence of UV light on the wood modules. The UV-irradiation (72 h; lambda>300 nm; I(o)=50 mW cm(-2)) decreased the lignin content on the surface by up to 20% of the original values. The colour difference of yellowing (deltaE) exhibited a systematic trend to higher values with increasing irradiation time. Our results show that the photoyellowing (UV-Vis detection) correlates very well with lignin degradation (IR detection). This result is in agreement with the quinone formation as the chromophoric reaction product of lignin decay. The degradation, yellowing, and oxidation kinetics differed only little using different light sources. The absorbed light intensity, which depends on wavelength, the intensity distribution of the light source and the absorption spectrum of lignin, influenced the degradation rate. Under the current experimental conditions, the absorption spectrum of lignin was the most important factor. Therefore, irradiation with lambda>280 nm is useful for rapidly monitoring the UV-degradation of wood

Color↗

Aggregation during coniferyl alcohol polymerization in pectin solution: a biomimetic approach of the first steps of lignification.

Coniferyl alcohol was polymerized in pectin solution in order to mimic the lignification that is the final step of biosynthesis of plant cell wall. Dehydrogenated polymers (DHP = coniferyl alcohol polymers = synthetic lignin) interact with pectin to form hydrophobic clusters as monitored by pyrene fluorescence spectroscopy. The structure of these clusters was studied during the polymerization of synthetic lignin by static and quasielastic light scattering and small angle neutron scattering experiments. We show that synthetic lignin and pectin contribute to the same clusters, but the inner structure of these clusters is very heterogeneous and displays three phases. One observes a segregation between well separated pectin and lignin rich phases at length scales below approximately 30 nm. As a corollary of this segregation, clusters embody a large amount of solvent. On average, the density of the polymer rich phase (lignin plus pectin) inside clusters increases while its specific surface area decreases throughout the polymerization process. These results are discussed with respect to in vivo lignification of the plant cell wall.

Biomimetic Materials↗

Variations in the cell wall composition of maize brown midrib mutants.

Most studies published thus far on the four brown midrib (bm) mutants (bm1, bm2, bm3, and bm4) in maize (Zea mays L.) have focused on one or two individual mutants, and comparisons between studies have been difficult because of variation in genetic backgrounds, maturity, and source of tissue. Detailed analyses of the stalks of the four bm single mutants and a bm1-bm2 double mutant in a common genetic background (inbred A619) revealed structural and compositional changes in their isolated cell walls and lignins compared to the wild-type inbred. 2D-NMR revealed a significant presence of benzodioxane units in the bm3 isolated lignin. 1D (13)C NMR revealed increased aldehyde levels in the bm1 and bm1-bm2 mutants compared to the wild-type inbred. The bm3 and bm1-bm2 mutants contained less Klason lignin in the isolated cell walls. The bm1, bm3, and bm1-bm2 mutants contained approximately 50% less esterified p-coumaric acid with noticeably elevated levels of ferulate in the bm3 mutant. A difference among bm mutants in the solubility of p-coumaric acid-lignin complexes during cellulase enzyme treatment was also discovered, suggesting that the bm mutations might also differ in the structural organization of lignin.

Aldehydes↗

Functions of two genes in aluminium (Al) stress resistance: repression of oxidative damage by the AtBCB gene and promotion of efflux of Al ions by the NtGDI1gene.

The functions of two genes whose expression provides tolerance to aluminium (Al) stress were investigated using plants and Saccharomyces cerevisiae (yeast): the Arabidopsis thaliana blue copper binding gene (AtBCB) and Nicotiana tabacum guanosine diphosphate (GDP) dissociation inhibitor gene (NtGDI1). To determine the localization of these proteins, each gene was fused to the green fluorescent protein (GFP) gene and introduced into onion epidermal cells. AtBCB was localized to cell membrane region and NtGDI1 to cytoplasm. Transgenic lines over-expressing the AtBCB gene showed constitutive lignin production in whole roots. By contrast, wild-type Arabidopsis (Ler) produced a negligible level of lignin and enhanced lignin production in the root-tip region by Al stress. Compared with Ler, the AtBCB-expressing lines showed a lower deposition of malon dialdehyde after Al stress. Microscopic observation of the Al-treated roots indicated that the deposition of lipid peroxides was clearly low in the area where lignin accumulated. It was proposed that lipid peroxidation caused by Al stress was diminished by the formation of lignin. Expression of the NtGDI1 gene in yeast complemented the temperature-sensitive phenotype of a sec19 mutant at 37 degrees C. This gene also complemented an Al-sensitive phenotype shown by the sec19 mutant at the permissive temperature of 32 degrees C. These results suggested that the yeast Sec19 vesicle transport system has a function in providing basal Al resistance in yeast by the export of Al ions. It was also proposed that over-expression of the NtGDI1 protein activates an Al efflux system that protects Arabidopsis against Al toxicity.

Aluminum↗

Lignification in beech (Fagus sylvatica) grown at elevated CO2 concentrations: interaction with nutrient availability and leaf maturation.

Beech (Fagus sylvatica L.) seedlings were grown in an ambient or elevated CO2 concentration ([CO2]) either in small stands in microcosms for three to four seasons or individually in pots fertilized at different nutrient supply rates. Leaves at different stages of development, as well as stems and roots at the end of the growing season, were used for analysis of structural biomass and lignin. In elevated [CO2], lignification of leaves was slightly retarded compared with structural biomass production and showed a strong correlation with the activities of ionically, cell-wall-bound peroxidases but not with total soluble peroxidases or covalently wall-bound peroxidases. The effect of elevated [CO2] on lignin concentration of mature tissues was dependent on nutrient supply rate. In leaves and roots, elevated [CO2] increased the lignin concentration in dry mass in N-limited plants. In seedlings grown with high nutrient supply, the lignin concentration in dry mass was unaffected or diminished by elevated [CO2]. Because elevated [CO2] enhanced seedling growth in the high nutrient supply treatments, the total amount of lignin produced per seedling was higher in these treatments. We predict that long-term sequestration of carbon will increase as long as biomass production is stimulated by elevated [CO2] and that tissue quality will change depending on developmental stage and nutrient availability.

Biomass↗

Expression pattern of two paralogs encoding cinnamyl alcohol dehydrogenases in Arabidopsis. Isolation and characterization of the corresponding mutants.

Studying Arabidopsis mutants of the phenylpropanoid pathway has unraveled several biosynthetic steps of monolignol synthesis. Most of the genes leading to monolignol synthesis have been characterized recently in this herbaceous plant, except those encoding cinnamyl alcohol dehydrogenase (CAD). We have used the complete sequencing of the Arabidopsis genome to highlight a new view of the complete CAD gene family. Among nine AtCAD genes, we have identified the two distinct paralogs AtCAD-C and AtCAD-D, which share 75% identity and are likely to be involved in lignin biosynthesis in other plants. Northern, semiquantitative restriction fragment-length polymorphism-reverse transcriptase-polymerase chain reaction and western analysis revealed that AtCAD-C and AtCAD-D mRNA and protein ratios were organ dependent. Promoter activities of both genes are high in fibers and in xylem bundles. However, AtCAD-C displayed a larger range of sites of expression than AtCAD-D. Arabidopsis null mutants (Atcad-D and Atcad-C) corresponding to both genes were isolated. CAD activities were drastically reduced in both mutants, with a higher impact on sinapyl alcohol dehydrogenase activity (6% and 38% of residual sinapyl alcohol dehydrogenase activities for Atcad-D and Atcad-C, respectively). Only Atcad-D showed a slight reduction in Klason lignin content and displayed modifications of lignin structure with a significant reduced proportion of conventional S lignin units in both stems and roots, together with the incorporation of sinapaldehyde structures ether linked at Cbeta. These results argue for a substantial role of AtCAD-D in lignification, and more specifically in the biosynthesis of sinapyl alcohol, the precursor of S lignin units.

Alcohol Oxidoreductases↗

Study of lignification by noninvasive techniques in growing maize internodes. An investigation by Fourier transform infrared cross-polarization-magic angle spinning 13C-nuclear magnetic resonance spectroscopy and immunocytochemical transmission electron microscopy.

Noninvasive techniques were used for the study in situ of lignification in the maturing cell walls of the maize (Zea mays L.) stem. Within the longitudinal axis of a developing internode all of the stages of lignification can be found. The synthesis of the three types of lignins, p-hydroxyphenylpropane (H), guaiacyl (G), and syringyl (S), was investigated in situ by cross-polarization-magic angle spinning 13C-solid-state nuclear magnetic resonance, Fourier transform infrared spectroscopy, and immunocytochemical electron microscopy. The first lignin appearing in the parenchyma is of the G-type preceeding the incorporation of S nuclei in the later stages. However, in vascular bundles, typical absorption bands of S nuclei are visible in the Fourier transform infrared spectra at the earliest stage of lignification. Immunocytochemical determination of the three types of lignin in transmission electron microscopy was possible thanks to the use of antisera prepared against synthetic H, G, and the mixed GS dehydrogenative polymers (K. Ruel, O. Faix, J.P. Joseleau [1994] J Trace Microprobe Tech 12: 247-265). The specificity of the immunological probes demonstrated that there are differences in the relative temporal synthesis of the H, G, and GS lignins in the different tissues undergoing lignification. Considering the intermonomeric linkages predominating in the antigens used for the preparation of the immunological probes, the relative intensities of the labeling obtained provided, for the first time to our knowledge, information about the macromolecular nature of lignins (condensed versus noncondensed) in relation to their ultrastructural localization and development stage.

Animals↗

Purification and characterization of peroxidases correlated with lignification in poplar xylem.

Lignin is an integral cell wall component of all vascular plants. Peroxidases are widely believed to catalyze the last enzymatic step in the biosynthesis of lignin, the dehydrogenation of the p-coumaryl alcohols. As the first stage in identifying lignin-specific peroxidase isoenzymes, the classical anionic peroxidases found in the xylem of poplar (Populus trichocarpa Trichobel) were purified and characterized. Five different poplar xylem peroxidases (PXP 1, PXP 2, PXP 3-4, PXP 5, and PXP 6) were isolated. All five peroxidases were strongly glycosylated (3.6% to 4.9% N-glucosamine), with apparent molecular masses between 46 and 54 kD and pI values between pH 3.1 and 3.8. Two of the five isolated peroxidases (PXP 3-4 and PXP 5) could oxidize the lignin monomer analog syringaldazine, an activity previously correlated with lignification in poplar. Because these isoenzymes were specifically or preferentially expressed in xylem, PXP 3-4 and PXP 5 are suggested to be involved in lignin polymerization.

Amino Acid Sequence↗

Structural motifs of syringyl peroxidases predate not only the gymnosperm-angiosperm divergence but also the radiation of tracheophytes.

* The most distinctive variation in the monomer composition of lignins in vascular land plants is that found between the two main groups of seed plants. Thus, while gymnosperm lignins are typically composed of guaiacyl (G) units, angiosperm lignins are largely composed of similar levels of G and syringyl (S) units. * However, and contrary to what might be expected, peroxidases isolated from basal (Cycadales and Ginkgoales) and differentially evolved (Coniferales and Gnetales) gymnosperms are also able to oxidize S moieties, and this ability is independent of the presence or absence of S-type units in their lignins. * The results obtained led us to look at the protein database to search for homologies between gymnosperm peroxidases and true eudicot S-peroxidases, such as the Zinnia elegans peroxidase. * The findings showed that certain structural motifs characteristic of eudicot S-peroxidases (certain amino acid sequences and beta-sheet secondary structures) predate the gymnosperm-angiosperm divergence and the radiation of tracheophytes, since they are found not only in peroxidases from basal gymnosperms, ferns and lycopods, but also in peroxidases from the moss Physcomitrella patens (Bryopsida) and the liverwort Marchantia polymorpha (Marchantiopsida), which, as typical of bryophytes, do not have xylem tissue nor lignins.

Amino Acid Motifs↗

Degradation of phenanthrene by Phanerochaete chrysosporium occurs under ligninolytic as well as nonligninolytic conditions.

In order to delineate the roles of lignin and manganese peroxidases in the degradation of polycyclic aromatic hydrocarbons by Phanerochaete chrysosporium, the biodegradation of phenanthrene (chosen as a model for polycyclic aromatic hydrocarbons) was investigated. The disappearance of phenanthrene from the extracellular medium and mycelia was determined by using gas chromatography. The disappearance of phenanthrene from cultures of wild-type strains BKM-F1767 (ATCC 24725) and ME446 (ATCC 34541) under ligninolytic (low-nitrogen) as well as nonligninolytic (high-nitrogen) conditions was observed. The study was extended to two homokaryotic (basidiospore-derived) isolates of strain ME446. Both homokaryotic isolates, ME446-B19 (which produces lignin and manganese peroxidases only in low-nitrogen medium) and ME446-B5 (which totally lacks lignin and manganese peroxidase activities), caused the disappearance of phenanthrene when grown in low- as well as high-nitrogen media. Moreover, lignin and manganese peroxidase activities were not detected in any of the cultures incubated in the presence of phenanthrene. Additionally, the mineralization of phenanthrene was observed even under nonligninolytic conditions. The results collectively indicate that lignin and manganese peroxidases are not essential for the degradation of phenanthrene by P. chrysosporium. The observation that phenanthrene degradation occurs under nonligninolytic conditions suggests that the potential of P. chrysosporium for degradation of certain environmental pollutants is not limited to nutrient starvation conditions.

Basidiomycota↗

New polymeric model substrates for the study of microbial ligninolysis.

Lignin model dimers are valuable tools for the elucidation of microbial ligninolytic mechanisms, but their low molecular weight (MW) makes them susceptible to nonligninolytic intracellular metabolism. To address this problem, we prepared lignin models in which unlabeled and alpha-14C-labeled beta-O-4-linked dimers were covalently attached to 8,000-MW polyethylene glycol (PEG) or to 45,000-MW polystyrene (PS). The water-soluble PEG-linked model was mineralized extensively in liquid medium and in solid wood cultures by the white rot fungus Phanerochaete chrysosporium, whereas the water-insoluble PS-linked model was not. Gel permeation chromatography showed that P. chrysosporium degraded the PEG-linked model by cleaving its lignin dimer substructure rather than its PEG moiety. C alpha-C beta cleavage was the major fate of the PEG-linked model after incubation with P. chrysosporium in vivo and also after oxidation with P. chrysosporium lignin peroxidase in vitro. The brown rot fungus Gloeophyllum trabeum, which unlike P. chrysosporium lacks a vigorous extracellular ligninolytic system, was unable to degrade the PEG-linked model efficiently. These results show that PEG-linked lignin models are a marked improvement over the low-MW models that have been used in the past.

Basidiomycota↗

Evaluation of pretreatment with Pleurotus ostreatus for enzymatic hydrolysis of rice straw.

The effects of biological pretreatment of rice straw using four white-rot fungi (Phanerochaete chrysosporium, Trametes versicolor, Ceriporiopsis subvermispora, and Pleurotus ostreatus) were evaluated on the basis of quantitative and structural changes in the components of the pretreated rice straw as well as susceptibility to enzymatic hydrolysis. Of these white-rot fungi, P. ostreatus selectively degraded the lignin fraction of rice straw rather than the holocellulose component. When rice straw (water content of 60%) was pretreated with P. ostreatus for 60 d, the total weight loss and the degree of Klason lignin degraded were 25% and 41%, respectively. After the pretreatment, the residual amounts of cellulose and hemicellulose were 83% and 52% of those in untreated rice straw, respectively. By enzymatic hydrolysis with a commercial cellulase preparation for 48 h, 52% holocellulose and 44% cellulose in the pretreated rice straw were solubilized. The net sugar yields based on the amounts of holocellulose and cellulose of untreated rice straw were 33% for total soluble sugar from holocellulose and 32% for glucose from cellulose. The SEM observations showed that the increase in susceptibility of rice straw to enzymatic hydrolysis by pretreatment with P. ostreatus is caused by partial degradation of the lignin seal. When the content of Klason lignin was less than 15% of the total weight of the pretreated straw, enhanced degrees of enzymatic solubilization of holocellulose and cellulose fractions were observed as the content of Klason lignin decreased.

Biodegradation, Environmental↗

Understanding factors that limit enzymatic hydrolysis of biomass: characterization of pretreated corn stover.

Spectroscopic characterization of both untreated and treated material is being performed in order to determine changes in the biomass and the effects of pretreatment on crystallinity, lignin content, selected chemical bonds, and depolymerization of hemicellulose and lignin. The methods used are X-ray diffraction for determination of cellulose crystallinity (CrI); diffusive reflectance infrared (DRIFT) for changes in C-C and C-O bonds; and fluorescence to determine lignin content. Changes in spectral characteristics and crystallinity are statistically correlated with enzymatic hydrolysis results to identify and better understand the fundamental features of biomass that govern its enzymatic conversion to monomeric sugars. Models of the hydrolysis initial rate and 72 h extent of conversion were developed and evaluated. Results show that the hydrolysis initial rate is most influenced by the cellulose crystallinity, while lignin content most influences the extent of hydrolysis at 72 h. However, it should be noted that in this study only crystallinity, lignin, and selected chemical bonds were used as inputs to the models. The incorporation of additional parameters that affect the hydrolysis, like pore volume and size and surface area accessibility, would improve the predictive capability of the models.

Biomass↗

Biochemical characterization of a cinnamoyl-CoA reductase from wheat.

Cinnamoyl-CoA reductase (CCR) is responsible for the CoA ester-->aldehyde conversion in monolignol biosynthesis, which can divert phenylpropanoid-derived metabolites into the biosynthesis of lignin. To gain a better understanding of lignin biosynthesis in wheat (Triticum aestivum L.), a cDNA encoding CCR was isolated and named Ta-CCR2. DNA hybridization analyses demonstrated that the Ta-CCR2 gene exists in three copies in the wheat genome. RNA blot hybridization indicated that Ta-CCR2 was expressed most abundantly in root and stem tissues that were in the process of lignification. The secondary and three-dimensional structures of Ta-CCR2 were analyzed by molecular modeling. Recombinant Ta-CCR2 protein purified from E. coli converted feruloyl CoA, 5-OH-feruloyl CoA, sinapoyl CoA and caffeoyl CoA with almost similar efficiency, suggesting that it is involved in both G and S lignin synthesis. Ta-CCR2 had a very low V max value for 4-coumaroyl CoA, which may serve as a mechanism to control metabolic flux to H lignin in vivo . Furthermore, the reaction mechanism of Ta-CCR2 was analyzed in relation to its possible three-dimensional structure. The activity of Ta-CCR2 in relation to lignin biosynthesis is discussed.

Acyl Coenzyme A↗

Tree species effects on decomposition and forest floor dynamics in a common garden.

We studied the effects of tree species on leaf litter decomposition and forest floor dynamics in a common garden experiment of 14 tree species (Abies alba, Acer platanoides, Acer pseudoplatanus, Betula pendula, Carpinus betulus, Fagus sylvatica, Larix decidua, Picea abies, Pinus nigra, Pinus sylvestris, Pseudotsuga menziesii, Quercus robur, Quercus rubra, and Tilia cordata) in southwestern Poland. We used three simultaneous litter bag experiments to tease apart species effects on decomposition via leaf litter chemistry vs. effects on the decomposition environment. Decomposition rates of litter in its plot of origin were negatively correlated with litter lignin and positively correlated with mean annual soil temperature (MAT(soil)) across species. Likewise, decomposition of a common litter type across all plots was positively associated with MAT(soil), and decomposition of litter from all plots in a common plot was negatively related to litter lignin but positively related to litter Ca. Taken together, these results indicate that tree species influenced microbial decomposition primarily via differences in litter lignin (and secondarily, via differences in litter Ca), with high-lignin (and low-Ca) species decomposing most slowly, and by affecting MAT(soil), with warmer plots exhibiting more rapid decomposition. In addition to litter bag experiments, we examined forest floor dynamics in each plot by mass balance, since earthworms were a known component of these forest stands and their access to litter in litter bags was limited. Forest floor removal rates estimated from mass balance were positively related to leaf litter Ca (and unrelated to decay rates obtained using litter bags). Litter Ca, in turn, was positively related to the abundance of earthworms, particularly Lumbricus terrestris. Thus, while species influence microbially mediated decomposition primarily through differences in litter lignin, differences among species in litter Ca are most important in determining species effects on forest floor leaf litter dynamics among these 14 tree species, apparently because of the influence of litter Ca on earthworm activity. The overall influence of these tree species on leaf litter decomposition via effects on both microbial and faunal processing will only become clear when we can quantify the decay dynamics of litter that is translocated belowground by earthworms.

Analysis of Variance↗