Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Spray drying”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75Linked to original sources

Metsulfuron spray drift reduces fruit yield of hawthorn (Crataegus monogyna L.).

This study was carried out to investigate whether spray drift of metsulfuron has a potential to negatively affect hawthorn (Crataegus monogyna) hedgerows near agricultural fields. For this purpose four doses of metsulfuron ranging from 5% to 40% of the field dose (4 g metsulfuron per hectare) were sprayed on trees in seven different hawthorn hedgerows. The actual deposition on the leaves was measured by means of a tracer (glycine). Spraying was conducted both at the bud stage and at early flowering. Leaves, flowers, green berries and mature berries were harvested and the number and weight of each were measured. The spraying at the bud stage caused a highly significant reduction in number and dry weight of berries, whereas it had no effects on leaf and flower production. The berry reduction was close to 100% at actual depositions relevant for spray drift under normal conditions. Spraying at early flowering also significantly reduced berries although the effect was smaller than for the spraying at bud stage. The early flower stage spraying caused no reduction in number and size of leaves. The possible ecological consequence is that metsulfuron spray drift from agricultural fields has a potential to reduce the amount of berries available for frugivorous birds in nearby hedgerows. A potential need for regulatory measures to reduce herbicide spray drift to hedgerows situated near agricultural fields with herbicide use is also indicated.

Aerosols↗

Control of an exotic tick (Aponomma komodoense) infestation in a Komodo dragon (Varanus komodoensis) exhibit at a zoo in Florida.

A protocol was developed to control an exotic tick (Aponomma komodoense) infestation on three Komodo dragons (Varanus komodoensis) at a Florida zoo without direct application of acaricides to the lizards. With the Komodo dragons secured within their indoor pens, their outdoor enclosures and the exhibition area were sprayed with a formulation of permethrin prepared specifically for use with reptiles. Once the acaricide had dried, the Komodo dragons were allowed to return to their outdoor enclosures, whereupon the indoor pens were closed and sprayed with the same formulation. After this initial treatment, the outdoor and indoor areas were retreated every 2 wk and 8-10 wk, respectively, for 6 mo. The initial on-host and off-host tick count of 301 ticks fell to 0 ticks after 6 mo. No adverse effects of the acaricide treatment were observed on the lizards during daily monitoring.

Animals↗

Tolylfluanide + tebuconazole in the control of some ornamental foliage diseases.

In the control of Sphaerotheca pannosa var. rosae on rose Tolylfluanide + tebuconazole (Folicur Multi 50 WG at concentration 0.1%) was used for spray 2 -times at 14-day-intervals or 4-times at 7-day-intervals. After 4 weeks of plants protection effectiveness of tested product was about 75%. In the control of Diplocarpon rosae, the product was applied when first disease symptoms appeared on rose shrubs. Application was repeated 5-times at 14-day-intervals or 9-times at 7-day-intervals. After 9 week-protection effectiveness of tested product was about 85% and depended on frequency of sprayings. In the control of Puccinia horiana on chrysanthemum, Tolylfluanide + tebuconazole was used as plant spray twice at 14-day-intervals or 4-times at 7-day-intervals. After 4 week-protection the product suppressed of new telia formation about 55%. Application of the product for willow rust (Melampsora epitea) control suppressed formation of new uredia about 86% and half of them were dried. In the control of pelargonium rust (Puccinia pelargonii-zonalis) the product was used as plant spray 4-times at 7-day-intervals. It suppressed formation of new uredia about 90% and 1/3 of them were dried. It was found that 1 or 7 days after rose spray, spores of D. rosae collected from leaf blades only in 6% germinated. Spores taken from nonspraying leaves germinated in 90%. In case of P. pelargonii-zonalis, after 1 or 7 days after spraying, spores collected from protected plants germinated at 3%, compared to 90% on untreated plants. Spores of B. cinerea, collected from protected plants germinated at about 10%, whereas on control leaves at 90%.

Ascomycota↗

Technical, occupational health and environmental aspects of metal degreasing with aqueous cleaners.

Aqueous cleaners used for metal degreasing are detergent formulations containing surfactants (such as linear alkylbenzene sulphonates, alkylphenol ethoxylates or alcohol ethoxylates), builders (such as hydroxides, phosphates or silicates), sequestrants (such as EDTA or NTA), anti-corrosive agents (such as ethanolamines), solvents (such as glycol ethers or d-limonene) and other specialty additives. Generally sold as concentrates, they are typically diluted between 3 and 20 times in water, leading to solutions containing only a few per cent active products. The cleaning efficiency depends on physicochemical phenomena such as wetting, solubilization, emulsification, dispersion, sequestration and saponification, and is enhanced by thermal and mechanical energy. Cleaning equipment is based on spraying or immersion of the parts and may include drying and rinsing steps. Because of the complexity and variability of the mixtures, the occupational health and environmental evaluation of aqueous cleaners is based on the study of their components. Aqueous cleaners are generally believed to present a low risk to workers' health and to the environment. However, some anionic surfactants and strong alkalis are skin and eye irritants, ethanolamines are allergenic and several glycol ethers of the ethylene glycol family are proven systemic toxicants that are easily absorbed through the skin. Although most components of aqueous cleaners are biodegradable and of low ecotoxicity, alkylphenol ethoxylates degrade into persistent and toxic compounds. Phosphates, if released directly into the environment, may cause eutrophication of rivers and lakes. Waste recycling or treatment by specialized facilities is usually required for spent solutions containing contaminants such as oils and heavy metals. From a technical, toxicological and environmental standpoint, aqueous cleaners can be used successfully to replace traditional organic solvents used in metal degreasing.

Detergents↗

Properties of agents that effectively entrap liquid lipids.

A droplet of an oil-in-water emulsion of methyl linoleate in a saccharide or protein solution that contained with a surfactant, a stabilizer, or both was dehydrated by drying equipment for a single droplet that resembled a spray drier. The lipid exposed on the surface of dehydated samples was extracted and measured by gas chromatography. Gum arabic or gelatin without additives resulted in little lipid being exposed; they were good entrapping agents. Little lipid was exposed with a pullulan solution containing lecithin, sugar ester, carboxymethylcellulose, or sodium caseinate but much was exposed with a maltodextrin solution containing any of the surfactants tested. When both the surfactant lecithin and the stabilizer xanthan gum were added to the emulsion prepared in a maltodextrin solution, lipid was not detected. The results suggested that effective entrapping agents of liquid lipids cause much emulsification, stabilize the emulsion (that is, they cause the continuous phase to be very viscous), and create a dehydrated matrix of fine, dense network layers.

Chemical Phenomena↗

Efficacy and reproducibility of a produce wash in killing Salmonella on the surface of tomatoes assessed with a proposed standard method for produce sanitizers.

The reproducibility of a method developed to evaluate point-of-use sanitizers for fresh produce was tested at three different laboratories. Mixtures of five Salmonella serotypes were inoculated on the surface of ripe tomatoes. After the inoculum was dry, tomatoes were placed inside a plastic bag and sprayed with sterile USP water, Dey and Engley (D/E) neutralizer broth, or a prototype Fit produce wash (PW), an alkaline solution comprised of generally recognized as safe ingredients (water, oleic acid, glycerol, ethanol, potassium hydroxide, sodium bicarbonate, citric acid, and distilled grapefruit oil), and rubbed for 30 s. The tomatoes were rinsed 10 s with 195 ml of D/E neutralizer broth (rinse solution), then combined with 20 ml of D/E neutralizer (residual wash solution) and rubbed by hand to remove residual Salmonella. Populations of Salmonella were determined for each tomato in the rinse solution and residual wash solution. Treatment with PW resulted in reductions in the number of Salmonella 2 to 4 logs greater than those achieved with the sterile water or D/E neutralizer broth controls. Consistent results were obtained across the three study sites, indicating reproducible results were obtained using the test method. The method used to determine the efficacy of killing or removing Salmonella from tomatoes in this study is suggested as a standard method for measuring the efficacy of sanitizers on tomatoes and other similar fruits and vegetables with rigid, smooth surfaces.

Colony Count, Microbial↗

Breeding places of Phlebotomus argentipes Annandale and Brunetti (Diptera: Psychodidae) in West Bengal, India.

A search for the breeding places of Phlebotomus argentipes Annandale and Brunetti was undertaken in West Bengal during 1988-1990. Sugar flotation technique was applied for the isolation of larvae from the collected soil samples and emergence trap and sticky paper trap were used for the collection of adults. Soil incubation method was followed for the collection of emerged adults from the soil sample. A total 131 soil samples were analysed by flotation technique which produced 19 immature stages--7 from indoor and 12 from outdoor habitat. Soil incubation technique produced 38 adults of which 18 from indoor and 20 from outdoor. With the help of emergence trap 26 and 43 flies were collected from indoor and outdoor respectively. The number of immature stages and adult flies recovered from the outdoor showed higher recovery during post-monsoon months and lower in pre-monsoon and monsoon months. The result of this investigation indicated that probably the majority of the indoor catches are due to the migration of outdoor-produced sandflies specially in close surroundings where dried cow dung droppings were left. The necessity of spraying in these close areas in addition to indoor areas has been indicated to control the sandflies by antilarval measure.

Animals↗

Experimental evaluation of water-jet dissection in endoscopic surgery.

The problems associated with high-velocity high-pressure water-jet dissection were investigated by in-vivo experiments using endoscopic equipment. Three problems were identified: backspray with fouling of the optic, poor control of the depth of cut, and detachment of tissue fragments and isolated cells which contaminate the operative field. The first two problems have been resolved by adoption of a hooded hand-piece and the incorporation of an adjustable back stop. A "dry" system which enables the evacuation of the back spray may deal with the problem of contamination of the operative field by detached cells but further in-vivo experiments are needed to confirm this. Until then, water-jet cutting is considered unsafe for both open and endoscopic surgery in patients undergoing extirpative procedures for cancer because of the risk of tumour seeding within the peritoneal cavity.

Dissection↗

[Protein and energy value of spiruline blue algae supplemented by amino acids: digestive and metabolic utilization by the growing rat].

Protein and energy value of 6 samples of "Spirulina" was studied on growing rats in 1972 and 1973. Sample RL 1(Spirulina platensis, originating from Tchad) was grown in artifical conditions in a laboratory. Others samples (Spirulina maxima) were grown in the solar evaporator near Mexico, washed and dried either on heated rollers (MR8, MR13) or by spraying (MA 7, MA10). Sample MA10 D corresponds to sample MA10, bleached by ethanol plus acetone (Baron, 1975). Each Spirulina sample was the only protein source of balanced, starch diets. The diets were supplemented in essential amino acids (E.A.A.) according to the requirements of growing rats (table 1). The ratios [(digestible nitrogen/metabolisable energy (EM] of the Spirulina diets were similar to that of the control diets containing herring meal. The diets were fed to groups of 15 to 17 growing rats. Energy and nitrogen balances were established by the comparative slaughter technique. Blood and muscle samples were taken at slaughter for the determination of free amino acids levels.

Amino Acids↗

Disappearance of dislodgable residues of five organophosphate pesticides on citrus leaves and fruit during dry and wet weather in Florida.

Citrus leaf discs and fruit taken from trees sprayed at recommended levels and twice recommended levels with ethion, parathion, azinphosmethyl, carbophenothion, and dioxathion were shaken with water and wetting agent for removal of dislodgable residues at 0, 1, 3, 5, 7, 14 and 21 days following treatment. The first portion of the field experiment was performed during a period of no rainfall (April) and the second when there was rainfall (July) in 1973. Four replicates of 50 leaf discs and 4 fruit, respectively, were averaged from each sampling to give data reported. A gas chromatograph equipped with a flame photometric detector was used for analysis. Dislodgable residues found decreased with increasing time following application and samples from the wet period were lower than those from the dry period. Moisture and temperature could account for the differences in the two sampling period.

Citrus↗

Effects of boron foliar applications on vegetative and reproductive growth of sunflower.

Foliar application may be used to supply boron (B) to a crop when B demands are higher than can be supplied via the soil. While B foliar sprays have been used to correct B deficiency in sunflower (Helianthus annuus L.) in the field, no studies have determined the amount of B taken up by sunflower plant parts via foliar application. A study was conducted in which sunflower plants were grown at constant B concentration in nutrient solution with adequate B (46 micro m) or with limited B supply (0.24, 0.40 and 1.72 micro m) using Amberlite IRA-743 resin to control B supply. At the late vegetative stage of growth (25 and 35 d after transplanting), two foliar sprays were applied of soluble sodium tetraborate (20.8 % B) each at 0, 28, 65, 120 and 1200 mm (each spray equivalent to 0, 0.03, 0.07, 0.13 and 1.3 kg B ha-1 in 100 L water ha-1). The highest rate of B foliar fertilization resulted in leaf burn but had no other evident detrimental effect on plant growth. Under B-deficient conditions, B foliar application increased the vegetative and reproductive dry mass of plants. Foliar application of 28-1200 mm B increased the total dry mass of the most B-deficient plants by more than three-fold and that of plants grown initially with 1.72 micro m B in solution by 37-49 %. In this latter treatment, the dry mass of the capitulum was similar to that achieved under control conditions, but in no instance was total plant dry mass similar to that of the control. All B foliar spray rates increased the B concentration in various parts of the plant tops, including those that developed after the sprays were applied, but the B concentration in the roots was not increased by B foliar application. The B concentration in the capitulum of the plants sprayed at the highest rate was between 37 and 93 % of that in the control plants. This study showed that B foliar application was of benefit to B-deficient sunflower plants, increasing the B status of plant tops, including that of the capitulum which developed after the B sprays were applied.

Boron↗

Preparation of resin embedded unicellular organisms without the use of fixatives and dehydration media.

A method is presented for processing single cells for conventional ultrathin sectioning without the use of fixatives and dehydration media. The cells were fixed by a physical method--spray freezing--which provides extremely high cooling rates, needs no pretreatment with cryoprotective agents and is therefore assumed to maintain the in vivo morphology of the cell. Hitherto cells prepared in this way have been investigated exclusively by freeze etching. To combine the advantages of this method with those of conventional ultrathin sectioning we have processed spray frozen cells with widely varying water contents (spermatozoa and lymphocytes) by freeze drying at 188 K and vacuum embedding. When compared to conventional chemical fixation the differences found in ultrastructural preservation of spermatozoa using this kind of preparation were confined to the arrangement of spermhead membranes and middlepiece structures. Lymphocyte structure was much closer to that known from chemical preparation, the only differences being a denser cytoplasm, denser mitochondrial matrices and thicker plasma membranes. These differences are probably due to the absence of eluating and dissolving effects present in conventional chemical preparations. The ultrastructural preservation of spray frozen cells is not different after freeze etching or after freeze-drying and vacuum embedding. This indicates clearly that drying and resin embedding does not produce artefacts and that structural preservation is therefore limited by the quality of cryofixation. Therefore this method is considered a contribution to the problem of preservation of the in vivo assembly of cellular substructure. Furthermore it seems to be a potential basis for preparation of soluble or diffusible substances or cellular compounds which would be influenced by fixatives and dehydrating agents.

Animals↗

Effect of acid and alkali treatment of soybean meal on nitrogen utilization by ruminants.

Soybean meal (SBM) was treated with acid or alkali to determine effects on N solubility, in vitro NH3-N accumulation, in situ N degradability, and N digestion and retention in growing lambs. The following SBM treatments resulted in decreased (P less than .05) N solubility and in vitro NH3-N accumulation compared with control SBM: spraying with 2.5 or 5% acetic or propionic acid, soaking in .5 N HCl, .5 N NaOH or .5 N propionic acid followed by air drying, and soaking in H2O, .5 N HCl or .5 N propionic acid followed by drying at 100 C. In situ residual N was determined for SBM subjected to the above treatments. Soybean meal sprayed with 2.5 or 5% acetic or propionic acid had greater (P less than .05) in situ residual N after 4, 8 and 12 h of incubation than control SBM. Soybean meal soaked in .5 N HCl or .5 N NaOH and air-dried, and soaked in H2O, .5 N propionic acid or .5 N HCl and dried at 100 C had greater (P less than .05) in situ residual N after 4, 8, 12 and 24 h of incubation than control SBM. In a lamb N balance trial, SBM treated by spraying with 5% acetic or propionic acid or by soaking in .5 N NaOH did not result in reduced N digestion compared to control SBM. Feeding SBM soaked in .5 N NaOH resulted in a 39% increase (P less than .05) in N retention compared with control SBM (5.21 vs 3.74 g/d, respectively).(ABSTRACT TRUNCATED AT 250 WORDS)

Acids↗

Saturated salt solutions for humidity control and the survival of dry powder and oil formulations of Beauveria bassiana conidia.

Oil-based formulated conidia sprayed on steel plates and conidia powder (control) of Beauveria bassiana isolate IMI 386243 were stored at temperatures from 10 to 40 degrees C in desiccators over saturated salt solutions providing relative humidities from 32 to 88%, or in hermetic storage at 40 degrees C, and moisture contents in equilibrium with 33 or 77% relative humidity. The negative semi-logarithmic relation (P<0.005) between conidia longevity (at 40 degrees C) and equilibrium relative humidity did not differ (P>0.25) between formulated conidia and conidia powder. Despite this, certain saturated salts provided consistently greater longevity (NaCl) and others consistently shorter longevity (KCl) for formulated conidia compared to conidia powder. These results, analysis of previous data, and comparison with hermetic storage, indicate that storage of conidia over saturated salt solutions provides inconsistent responses to environment and so may be problematic for bio-pesticide research. In hermetic storage, oil formulation was not deleterious to longevity and in the more moist environment enhanced survival periods.

Animals↗

Spray-freezing freeze substitution (SFFS) of cell suspensions for improved preservation of ultrastructure.

Some unicellular organisms present challenges to chemical fixations that lead to common, yet obvious, artifacts. These can be avoided in entirety by adapting spray-freezing technology to ultrarapidly freeze specimens for freeze substitution. To freeze specimens, concentrated suspensions of cells ranging in diameter from 0.5-30 pm were sprayed with an airbrush at 140-200 kPa (1.05-1.5 torr; 20.3-29.0 psi) into a nylon mesh transfer basket submerged in liquid propane. After freezing, the mesh basket containing the frozen sample was lifted out of the chamber, drained and transferred through several anhydrous acetone rinses at 188 K (-85 degrees C). Freeze substitution was conducted in 1% tannic acid/1% anhydrous glutaraldehyde in acetone at 188 K (-85 degrees C), followed by 1% OsO4/acetone at 277 K (4 degrees C). Freeze substitution was facilitated using a shaking table to provide gentle mixing of the substitution medium on dry ice. High quality freezing was observed in 70% of spray-frozen dinoflagellate cells and in 95% of spray-frozen cyanobacterial cells. These could be infiltrated and observed directly; however, overall ultrastructural appearance and membrane contrast were improved when the freeze-substituted cells were rehydrated and post-fixed in aqueous OSO4, then dehydrated and embedded in either Spurr's or Epon resin. Ultrastructural preservation using this ultrarapid freezing method provided specimens that were consistently superior to those obtainable in even the best comparable chemical fixations.

Animals↗

Varnish application technique and microleakage of amalgam restorations.

Various techniques for applying two types of varnish to control microleakage of Class V amalgam restorations were compared in vitro. The drying time for each layer of varnish with a gentle air spray was varied, including delays in applying the second coat and the placement of the amalgam restoration. Microleakage was recorded by dye penetration. Both varnishes were inefficient at reducing dye penetration at the gingival wall. There were no statistical differences in dye penetration at the gingival wall between the two varnishes, regardless of the method of application, or the presence of varnish. Both varnishes exhibited good sealing properties at the occlusal wall when used according to the manufacturer's instructions, but varnish application was technique-sensitive. Short-cuts in the procedure may increase leakage; too short a drying time of either varnish can cause microleakage similar to the control group without a varnish.

Analysis of Variance↗

Designing surfaces that kill bacteria on contact.

Poly(4-vinyl-N-alkylpyridinium bromide) was covalently attached to glass slides to create a surface that kills airborne bacteria on contact. The antibacterial properties were assessed by spraying aqueous suspensions of bacterial cells on the surface, followed by air drying and counting the number of cells remaining viable (i.e., capable of growing colonies). Amino glass slides were acylated with acryloyl chloride, copolymerized with 4-vinylpyridine, and N-alkylated with different alkyl bromides (from propyl to hexadecyl). The resultant surfaces, depending on the alkyl group, were able to kill up to 94 +/- 4% of Staphylococcus aureus cells sprayed on them. A surface alternatively created by attaching poly(4-vinylpyridine) to a glass slide and alkylating it with hexyl bromide killed 94 +/- 3% of the deposited S. aureus cells. On surfaces modified with N-hexylated poly(4-vinylpyridine), the numbers of viable cells of another Gram-positive bacterium, Staphylococcus epidermidis, as well as of the Gram-negative bacteria Pseudomonas aeruginosa and Escherichia coli, dropped more than 100-fold compared with the original amino glass. In contrast, the number of viable bacterial cells did not decline significantly after spraying on such common materials as ceramics, plastics, metals, and wood.

Acrylates↗

Xanthan and galactomannan (from M. scabrella) matrix tablets for oral controlled delivery of theophylline.

Directly compressed theophylline tablets, containing commercial xanthan (X) (Keltrol) and a highly hydrophilic galactomannan (G) from the seeds of Mimosa scabrella (a brazilian leguminous tree called bracatinga) as release-controlling agents, were obtained. Gums were used at 4, 8, 12.5 and 25% (w/w), either alone or in mixture (X:G 1:1). During galactomannan extraction process, the biopolymer was dried in a scale up, by vacuum oven (VO) or spray dryer (SD). The in vitro drug release was evaluated at different time intervals during 8 h using apparatus 1 (USP 26) at 100 rpm. The pH of the dissolution medium (1.4) was changed to 4.0 and 6.8 after 2 and 3 h, respectively. Tablets containing G(SD) resulted in more uniform drug release than G(VO) ones, due to their smaller particle size. The drug release decreased with the increase of polymer concentration and all formulations at 25% w/w of gums showed excessive sustained release effect. The matrices made with alone X showed higher drug retention for all concentrations, compared with G matrices that released the drug too fast. The XG matrices were able to produce near zero-order drug release. The XG(SD) 8% tablets provided the required release rate (about 90% at the end of 8 h), with zero-order release kinetics. Tablets containing G(VO) in low concentration showed a complete erosion, while the others demonstrated fast hydration and swelling in contact with the dissolution medium. The release mechanism was a combination of diffusion and relaxation. The relative importance of these two processes varied with matrix composition. The XG(SD) 8% matrix showed higher contribution of polymer relaxation.

Administration, Oral↗