Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “ACRYLIC RESINS”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75Linked to original sources

The effect of poly-aramide fiber reinforcement on the transverse strength of a provisional crown and bridge resin.

A total number of 65 specimens of a provisional crown and bridge (PMMA) poly methyl methacrylate (acrylic resin) was utilized in the present study. Sixty specimens were reinforced either by silane-treated or un-silane-treated poly-aramide fibres. The specimens were classified according to the length and the fiber orientations. It was found that, the silanated longitudinally fibered specimens offered the greatest transverse strength (87.2 Mn/m2). On the other hand, the transversely fibered specimens demonstrated the lowest value (44.4 Mn/m2). Moreover, the 6 mm long randomly oriented silanated fibered specimens possessed a higher transverse strength values (73.6 Mn/m2) compared with 3 mm long and the combination 6 mm + 3 mm long silanated fibered specimens (55.2 Mn/m2 and 62 Mn/m2) respectively. It was demonstrated also that, the inclusion of the un-silanated fibers reduced the transverse strength values of the resin specimens dramatically.

Acrylic Resins↗

Influence of thickness on the linear dimensional change, warpage, and water uptake of a denture base resin.

This study examined the influence of thickness on changes (linear dimensions, warpage, and water uptake) in a denture base resin following two processing methods (heat polymerization and microwave activation). Changes were influenced by both processing method and thickness. These findings suggested that the processing method and denture base resin thickness are important factors in the dimensional change of acrylic resin dentures, and that the overall dimensional denture base changes are the result of localized changes.

Acrylic Resins↗

Accelerated aging affects color stability of provisional restorative materials.

PURPOSE: The color stability of two shades each of five acrylic resin and seven resin composite provisional restorative materials was evaluated by reflection spectrophotometry following in vitro accelerated aging. MATERIALS AND METHODS: Specimens of provisional restorative materials were polymerized according to manufacturers' instructions and aged in an artificial aging chamber with exposure to a total ultraviolet irradiation of 60 kJ/m2. Color was measured by CIE L*a*b* on a reflection spectrophotometer before and after aging. Color change (delta E*) was calculated and analyzed statistically. RESULTS: Statistically significant changes in color were observed after accelerated aging. Nine of the 12 provisional materials tested showed perceptible color change of at least one of the shades tested. The most color-stable materials were the acrylic, Alike, and the resin composites, Luxatemp and Protemp Garant, which had no perceptible color changes under these conditions. CONCLUSIONS: Some acrylic resin and composite provisional materials change color significantly and perceptibly when exposed to in vitro accelerated aging conditions.

Acrylic Resins↗

Surface failure of commercial and experimental restorative resins.

A single-pass test was used to study the surface failure of commercial and experimental restorative resins and composites. The surface failure observed for unfilled diacrylate resins was more severe than that seen for an unfilled acrylic resin. Addition of nonsilanated filler to the diacrylate resins increased the resistance to penetration but did not dramatically change the mode of surface failure. The surface failure of the commercial composite resins, which contain silanated filler, was ductile in mode and the resistance to penetration of the diamond slider was the highest of the materials studied. The wear of restorative resins and composites is determined, therefore, by resistance to penetration as well as mode of deformation during sliding.

Acrylic Resins↗

Composite resin veneers: a new technique.

A new technique for the fabrication of composite resin direct veneers is presented. In this technique, a transparent acrylic resin matrix is fabricated before preparation of the facial surface of the tooth, to allow the adequate reproduction of contour, shape, and surface texture originally exhibited by the tooth. Advantages, as well as limitations, of the procedure are also presented.

Acrylic Resins↗

The effect of glass fiber reinforcement on the residual monomer content of two denture base resins.

OBJECTIVE: The amount of residual monomer is one of the principal factors affecting the properties of acrylic resin denture bases. In recent years, glass fibers have been used to strengthen denture base resins. The purpose of this study was to investigate the effect of glass fiber reinforcement on the amount of residual methyl methacrylate released from two different denture base resins (heat cured and autopolymerized). METHOD AND MATERIALS: Continuous unidirectional and woven preimpregnated glass fiber reinforcements (Stick and Stick Net) were used to reinforce heat-curing and autopolymerizing denture base resins. RESULTS: The release of residual methyl methacrylate from heat-cured and autopolymerized test specimens reinforced with glass fibers was significantly higher than that from unreinforced test specimens. Stick Net glass fiber reinforcement resulted in significantly higher residual monomer release than did Stick glass fiber reinforcement. Test specimens made from heat-cured denture polymethyl methacrylate released less residual methyl methacrylate than did specimens made from autopolymerized polymethyl methacrylate. CONCLUSION: Glass fiber reinforcement increases the residual monomer content of denture base resins. The level of residual monomer ranged from 0.11% to 0.37% in heat-cured resin and from 0.18% to 0.46% in autopolymerized denture base resin.

Acrylic Resins↗

[Adaptation of currently used resins in prosthodontics].

This study is intended to detail the relative level of adaptation (at the hiatus palatinus) of five (5) acrylic resins used in partial and complete prosthodontics (Formatray, Orthodontic, Triad, Lucitone, Ivocap). These five (5) resins have been treated to five (5) different methods of conservation (in water at different temperatures, to air and to cold) to discover which of these methods are most likely to conserve the accuracy of adaptation one looks for in a resin.

Acrylic Resins↗

Influence of mechanical properties of two resin cements on durability of bond strength to dentin after cyclic loading.

The purpose of this study was to evaluate how the different mechanical properties of two luting agents (acrylic resin cement and resin composite cement) influenced their bond strength to dentin, after cyclic loading that simulated chewing. Stainless steel rods were bonded to the flattened dentin surfaces with each luting agent. After immersion in water for 24 hours, half the specimens of each group were tested for tensile bond strength and the remaining half were subjected to a vertical load (75.6 N, 1.2 Hz) using an acrylic stylus--which upon contact with the specimen would rotate counterclockwise and then counter-rotate. Bond strength of the resin composite cement with self-etching was found to be significantly lower than the other adhesive systems. After 100,000 cycles, the bond strength of resin composite cement was significantly decreased while acrylic resin cement showed no decrease in bond strength.

Acid Etching, Dental↗

Interactions between thermal cycled resilient denture lining materials, salivary and serum pellicles and Candida albicans in vitro. Part II. Effects on fungal colonization.

In the present study, the growth of a single isolate of Candida albicans on saliva-, serum-coated or protein free (uncoated), thermocycled (4-70 degrees C for 1 min, respectively; 0, 1000 and 10 000 times) seven commercial soft lining materials were investigated, by adenosine triphosphate (ATP) analysis. In the case of control resilient liners (not thermocycled and uncoated), the fungal colonization appeared to depend upon the type of commercial resilient liner used. Thus, the lowest colonization was observed with fluoric and heat-cured silicone materials, cold-cured silicone materials, except for one product, and heat-cured acrylic resin exhibited the highest colonization capacity, and cold-cured acrylic resilient liners exhibited the intermediate. However, the fungal colonization on the materials was significantly promoted both by thermal cycling (ANOVA, P<0.01) and a layer of protein coating (saliva, P<0.01; serum, P<0.01). These results, taken together, suggest that the ageing of the materials and the biological fluids of the host promote yeast colonization on resilient lining materials.

Acrylic Resins↗

Adsorption of flavonoids on resins: hesperidin.

Adsorption of hesperidin from aqueous solutions on styrene-divinylbenzene (SDVB) and acrylic resins was investigated at different pH values (1.5-5.5) and temperatures (10-40 degrees C). Adsorption was not affected by pH variation, whereas it increased on increasing temperature for the SDVB resins and remained substantially unchanged for the acrylic ones. The different behavior of the two types of resins was ascribed to the different wetting, because of their hydrophobic or partially hydrophilic properties, respectively. The equilibrium data at 20 degrees C were determined on 13 commercial resins displaying a wide range of surface areas (S(A), 330-1200 m(2)/g) and pore radii (P(R), 20-260 A). Data were well fitted to the Freundlich isotherm, and its parameters were used to compare the adsorption capacity of different resins. The most effective resin is a SDVB copolymer with the largest S(A) (1200 m(2)/g) and an intermediate P(R) (90 A). The Freundlich constants (K(F)) were rationalized in terms of a two parameter equation, including S(A) and P(R) as independent variables. The adsorption constant increased on increasing both S(A) and P(R) for the resins having P(R) </= 90 A; beyond this limit, the contribution of S(A) was predominant and that of P(R) was slightly negative.

Acrylic Resins↗

Stress distribution on the metal framework of the implant-supported fixed prosthesis using different veneering materials.

PURPOSE: This study evaluated stress distribution in metal frameworks constructed on implants under masticatory forces using computer simulations. MATERIALS AND METHODS: Three-dimensional finite element analysis was used to study four different veneering materials-metal framework combinations using Calcitek implants. The veneering materials used in the study were porcelain, heat-polymerized poly(methyl methacrylate) resin, microfilled composite resin, and glass-modified composite resin. All computations were conducted for different levels on the buccal and lingual sides. RESULTS: Changing the veneering material on the prosthesis produced significant effects on stress levels and stress distribution on the metal frameworks. Stresses were concentrated along the marginal area of the prosthesis. Acrylic resin showed greater displacement than porcelain, probably because of its lower modulus of elasticity. CONCLUSION: In comparison to porcelain, more stress is borne by the acrylic resin-veneered metal framework under static loading.

Acrylic Resins↗

Posterior resin composite restorations: a new technique.

A new technique for the performance of resin composite direct restorations on posterior teeth is presented. A clear acrylic resin matrix, fabricated prior to the preparation of the occlusal and proximal surfaces, is employed. The matrix allows the fast and accurate reproduction of the anatomic details from the original occlusal surface of the tooth, as well as the marginal ridges in the case of Class II (occlusoproximal) restorations. Advantages and limitations of the procedure are discussed.

Acrylic Resins↗

A comparison of different embedding media on the ultrastructure of the trabecular meshwork.

PURPOSE: To determine whether the preservation of the extracellular matrix and the ultrastructural appearance of the trabecular meshwork are affected by different histologic processing protocols and embedding media. Conventionally used epoxy resins such as Araldite require complete dehydration of tissue, while the acrylic resin LR White requires only partial dehydration, better preserves tissue antigens, and has been reported to preserve more of the extracellular matrix. METHODS: Seven human eyes ranging in age from 2 months to 78 years were dissected and tissue samples from each eye processed and embedded in both Araldite and LR White media. The ultrastructure of the trabecular cells and the extracellular matrix of the meshwork was compared between media. The preservation of the extracellular matrix in the juxtacanalicular region was determined by measuring the amount of material immediately underlying Schlemm(1)s canal. Immunoelectron microscopy was used to determine the composition of this material. RESULTS: Araldite provided better resolution of ultrastructural details than freshly polymerized LR White. After a period of ripening for several months, however, resolution of tissue details in LR White improved. No significant quantitative difference was found in the amount of extracellular matrix underlying Schlemm's canal when comparing the two media. Neither post-mortem time to fixation (up to 31 hr), donor age, nor immersion vs. perfusion fixation technique affected the amount of extracellular material present in the comparison of the two embedding media. Immunogold labeling of the extracellular material within the juxtacanalicular tissue revealed the presence of collagen IV, laminin, and fibronectin in the basement membrane region immediately underlying the inner wall, and also in scattered patches within the juxtacanalicular tissue. CONCLUSIONS: Despite the less rigorous processing required for LR White than epoxy embedding, neither the appearance nor amount of the extracellular material was affected by the different embedding protocols. Prolonged post-mortem time to fixation did not affect the appearance nor amount of extracellular matrix. Immunolabeling revealed that the extracellular matrix of the juxtacanalicular tissue contains components of basement membrane material.

Acrylic Resins↗

Three-dimensional stability of new denture base resin systems.

Ten maxillary dentures were constructed on standard-sized casts in each of four acrylic resins. Uniform placement of the artificial teeth and thickness of the base were maintained by use of a silicone rubber mold. Metal shot was luted in preselected positions to the dentures and the land of the cast. Frontal, lateral, and occlusal radiographs were made of the dentures at time intervals of (1) before processing, (2) after processing, (3) immediately after removal from the cast, and (4) 30 days later. Study of the radiographs revealed significant variations in position of the metal shot from the before-processing baseline within each group of dentures and significant differences between groups of dentures.

Acrylic Resins↗

Direct pressure provisionalization technique: a new open-tray technique for complete-arch rehabilitations.

An innovative direct technique that improves the accuracy of provisional acrylic resin restorations is introduced. A custom impression tray is modified to facilitate complete occlusal closure. This open tray is used to make an accurate overimpression prior to beginning tooth preparation procedures. Following tooth preparation, the acrylic resin-filled overimpression is returned to its intraoral position, and the patient occludes into the previously indexed impression material. The pressure overimpression technique is offered as an expedient technique for improving the accuracy of provisional restorations.

Acrylic Resins↗