Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “STEAM”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74Linked to original sources

Influence of pulse angle variations on stimulated echo acquisition mode proton nuclear magnetic resonance spectra of AB spin systems: theory and experiments with citrate.

The influence of pulse angle variations in the localization sequence stimulated echo acquisition mode (STEAM) on the signal of strongly coupled AB spin systems has been examined. Experimental 1H nuclear magnetic resonance (NMR) spectra of citrate were recorded on a 1.5 T whole-body imager. Theoretically calculated spectra were generated, with good correlation to experimental results. The dependence of the signal intensity on sequence timing and pulse angles was calculated analytically. For longer sequence timings, the ratio of the signal intensity from citrate to the signal intensity from uncoupled nuclei depends strongly on the applied flip angles. The shape of spectra also changes with varying flip angles. These effects are clearly less pronounced for STEAM than for point resolved spectroscopy (PRESS). The results have to be considered for quantitative measurements of citrate in spectroscopic investigations as, e.g. of prostate neoplasms.

Acetic Acid↗

Noninvasive skeletal muscle lactate detection between periods of intense exercise in humans.

We investigated whether localized 1H nuclear magnetic resonance spectroscopy (NMRS) using stimulated echoes (STEAM) with a long mixing time (t(m)) allowed the suppression of the fat signal and detection of lactate in skeletal muscle. The 1H NMRS sequence was first validated in three isolated and perfused rabbit biceps brachii muscles. Spectra were obtained on a wide-bore spectrometer using a dual-tuned probe (1H and 31P). Death was simulated by ceasing the muscle perfusion, which allowed post-mortem changes to be followed. During and after the simulated death, changes in levels of pH and in content of energy-rich compounds were observed with 31P NMRS. Our results showed an inverse linear relationship between pH and lactate in each of the three rabbits (r = 0.93, P < 0.001; r = 0.92, P < 0.01; r = 0.89, P < 0.01) and a decrease in phosphocreatine and concomitant increase in lactate. We then investigated whether this sequence allowed repeated detection of lactate in human soleus muscle during the recovery between periods of intense exercise (force-velocity test, F-v test). Seven subjects mean age 25.1 (SEM 0.8) years participated in this study. Soleus muscle lactate was detected at rest and for 3 min 30 s of the 5-min recovery between periods using a 2.35-T 40-cm bore magnet spectrometer. Arm venous plasma lactate concentration was measured at rest, during the F-v test when the subject stopped pedalling (S1), and at the end of each 5-min recovery between periods (S2). Results showed that the venous plasma lactate concentration at S1 and S2 increased significantly from the beginning of the F-v test to peak anaerobic power (W(an,peak)) (P < 0.001). The spectra showed that muscle lactate resonance intensity rose markedly when W(an,peak) was achieved. The muscle lactate resonance intensity plotted as a percentage of the resting value increased significantly at W(an,peak) compared with submaximal braking forces (P < 0.05). We concluded from these results that localized 1H NMRS using STEAM with a long t(m) allows suppression of the fat signal and repeated detection of lactate on isolated perfused skeletal muscle in animals and between periods of intense exercise in humans.

Adult↗

New technology for sterilization and disinfection.

Sterilization with low temperature steam and formaldehyde is a well-known process in many European countries, but little known in the United States. It sterilizes reliably and reproducibly at temperatures greater than or equal to 65 degrees C. With a well-designed cycle, it leaves residues of formaldehyde on sterilized items below 5 micrograms/cm2, measured on a standard filter paper. Formaldehyde levels in air near the autoclave are well below official exposure limits, if at all measurable. Occurrence of late growers in bioindicators, and penetration of the sterilizing media into long narrow lumina, should be validated for new processes. Automated cleaning and disinfection in closed washer-disinfectors and flushing disinfectors are likewise processes relatively little known in the United States. Disinfection is achieved by a final rinse with hot water or steam. Washer-disinfectors are used for surgical instruments, nondisposable anesthesia and other equipment, flushing disinfectors for nondisposable bedpans, wash-bowls, urinals, and similar equipment. They clean well, washer-disinfectors excellently so, and disinfect reliably. With the use of such equipment in wards, surgical departments, and other areas, reliance on chemical germicides can be dramatically reduced and disposables can be replaced by disinfectable nondisposables.

Disinfection↗

Effect of metal surface treatment on ceramic bond strength.

This study indicates that the unaltered specimens of both alloys produced the lowest bond values; for the gold-palladium alloy, a short degassing period (manufacturer's recommendation) and a 10-minute degassing period resulted in significantly lower bond strengths than those observed with the aluminum oxide and the steam cleaning treatments; and all treatments of the silver-palladium alloy gave comparable bond strengths to that obtained with the manufacturer's recommendation for surface treatment. Because the simplified methods gave equivalent or higher bond strength values than the manufacturer's recommendations, and because of the time saving, we recommend the following procedures for the porcelain-alloy systems tested: After casting and investment removal, use an abrasive to remove casting irregularities and to modify or correct the surface that will receive porcelain. Create a uniform matte finish on the surface that is to receive porcelain by pressure blasting with 50 micron aluminum oxide particles, or steam clean the surface for 30 seconds, or both. Proceed with opaquing.

Dental Alloys↗

Pulmonary edema: reversal by ultrafiltration.

Ultrafiltration, the process by which plasma water is removed from the blood was utilized to determine its effect on lowering lung water in pulmonary edema produced by fluid overload, steam inhalation, and endotoxin. Lung water was measured by the thermal-dye indicator dilution technique which correlated well with lung water measured gravimetrically over a wide range (r = 0.95). Edema was produced by fluid overload in five mongrel dogs (Group I), by steam inhalation (Group II), and by endotoxin (Group III). Extravascular lung water (EVLW) rose significantly (P = less than 0.05) from control levels with the production of the edematous states (Group I: 8.0 ml/kg (mean) +/- 1.9 (SD) to 13.1 +/- 1.9); (Group II: 8.1 +/- 1.0 to 10.7 +/- 0.7); (Group III: 7.4 +/- 0.9 to 10.3 +/- 1.2). EVLW then fell significantly (P = less than 0.05) after ultrafiltration in all three groups (Group I: 8.9 +/- 2.4; Group II: 7.8 +/- 1.9; Group III: 7.7 +/- 1.4). Ultrafiltration was effective in reversing pulmonary edema and may have clinical application when excess lung water interferes with cardiac or pulmonary function.

Animals↗

Characterization of the immunosuppressive effect of burned tissue in an animal model.

The immunosuppressive effect of burned tissue was studied using a mouse burn model. To evaluate the immunologic status an in vivo measure of cell-mediated immunity (CMI) involving contact sensitization of mice by painting the skin with dinitrofluorobenzene was used; mice were challenged 5 days later by painting the ear with the same antigen. Ear swelling in response to antigenic challenge was used as a quantitative measure of CMI; diminution in ear swelling in treatment mice compared to sensitized, unburned control mice indicated the degree of immunosuppression. A full-thickness steam burn covering 20% body surface ares (BSA) was profoundly immunosuppressive as reflected by ear swelling of 45 to 60% of that found in normal mice; partial thickness burns and burns of 10% BSA extent were not significantly immunosuppressive. Transfer into unburned mice of burned skin equivalent in size to a 20% BSA burn eschar resulted in marked immunosuppression, but transfer of smaller amounts of burned skin, or of larger amounts of unburned skin and normal and burned liver tissue, did not produce immunosuppression. Mice receiving a very high-temperature (300 degrees C), dry burn were only slightly more suppressed than mice receiving a standard steam burn. Normal immunity was preserved in burned mice which received daily application of cerium nitrate to the wound for 7 days, but application of other topical agents commonly used in burn treatment did not preserve immunity. Postburn immunosuppression thus appears related quantitatively to toxic factors in burned skin, and these toxic factors can be abrogated in burned mice by the topical application of cerium nitrate.

Animals↗

Preliminary results of proton magnetic resonance spectroscopy in motor neurone disease (amytrophic lateral sclerosis).

Possible changes in brain metabolites in motor neurone disease/amytrophic lateral sclerosis (MND/ALS) were investigated using 1H magnetic resonance spectroscopy (MRS). A series of normal, healthy volunteer controls and MND patients have been studied using a spin echo (SE) 135 ms sequence, acquiring spectra from the region of the motor cortex. A further limited series of studies have been made for similar groups of volunteers and MND patients using a STEAM 20 ms sequence (stimulated echo). Analysis of the SE 135 ms spectra indicates there are statistically significant differences in the ratios of N-acetyl-aspartate to creatine and N-acetyl-aspartate to choline between controls and MND patients. Furthermore, metabolites identified using the STEAM 20 ms may be of great importance in the investigations of free radical mediated mechanisms, which have been postulated as being important contributors to the disease process. Preliminary results indicate that 1H MRS may provide important data to help understand the disease processes in MND and it could form a useful method for monitoring the effects of future trial treatment regimens.

Adult↗

Inhibition of whole blood platelet-aggregation by compounds in garlic clove extracts and commercial garlic products.

The inhibitory effects of adenosine and 16 quantitatively determined organosulfur compounds derived from garlic cloves or commercial garlic preparations on collagen stimulated in vitro platelet aggregation in whole blood were determined. An estimation of the anti-aggregatory activity of several brands of the major types of commercial garlic preparations was determined from the activities of the individual compounds present in each sample. In platelet rich plasma (PRP) most of the anti-aggregatory activity of garlic clove homogenates was due to adenosine; however, in whole blood neither adenosine nor the polar fraction had any effect and all of the anti-aggregatory activity was due to allicin and other thiosulfinates. Allicin was equally active in whole blood and PRP. Among brands there was a several-fold variation in content of the organosulfur compounds and activity for all types of garlic products tested. The best garlic powder tablets were equally as active as clove homogenates whereas steam-distilled oils were 35% as active and oil-macerates (due to low content) only 12% as active. A garlic product aged many months in aqueous alcohol had no activity. For steam-distilled oils, most of the activity was due to diallyl trisulfide. For the oil-macerates, most of the activity was due largely to the vinyl dithiins. Ajoene, an exclusive component of the oil-macerates, had highest specific activity of all the compounds tested but, because of its low concentration, had only 13% of the activity of diallyl trisulfide and 3% of the activity of allicin. Compounds which may be active in vivo are discussed.

Adenosine↗

Technical aspects of gaseous formaldehyde as a sterilant.

The design of a sterilizer for sterilization of heat sensitive items using gaseous formaldehyde and steam is described. The sterilizer is able to create a constant formaldehyde-steam concentration over a period of at least one hour. It is further able to operate at formaldehyde concentrations close to saturation with only small residues on sterilized plastic materials. The autoclave is used for measurement of formaldehyde solubility in polyolefines and poly(vinyl chloride) being approx. 15 and 250 ppm, respectively, at 70 degrees C and 30 mg HCHO I-1. The diffusion coefficient of formaldehyde in poly(vinyl chloride) is measured and is in the same order of magnitude as for ethylene oxide in poly(methyl methacrylate) i.e. 10(-10) cm2 s-1. Measurements of airborne formaldehyde in front of different sterilizers show that it is possible to design facilities meeting occupational exposure limits.

Diffusion↗

Sterilization of a non-porous item, the Celltrifuge Bowl, in a porous load sterilizer.

Sterilizing conditions within a Celltrifuge Bowl were investigated using thermocouples. The difficulty of achieving steady state sterilizing conditions within the assembled unit was confirmed. Results suggest the poor steam penetration was due, at least in part, to condensate generated internally preventing further steam entry, and to slow heat transmission of the materials. The investigations indicate that standard porous load sterilizing cycles, by themselves, may not be adequate to sterilize such items of equipment.

Centrifugation↗

Short echo time proton spectroscopy of human brain using a gradient head coil.

Short echo time, single voxel localized proton spectroscopy was accomplished using a stimulated echo (STEAM) sequence running on a Siemens 1.5-T system with a head coil incorporating the Z and Y gradients. Spectra from the temporal lobe, the cerebellum and mid brain were acquired from a group of normal volunteers using the following parameters: voxel size = 8 ml, TE = 22 msec, 512 signal averages and TR = 1.7 sec. STEAM spectra acquired with the small diameter gradients showed significantly fewer artifacts at short TE, allowing the observation of glutamate/glutamine, GABA, taurine, and inositol in addition to the prominent resonance of choline, creatine/phosphocreatine and N-acetylaspartate (NAA). The levels of chlorine, creatine and NAA were found to be significantly different in the three regions of the brain examined.

Adult↗

MR imaging of fat-containing tissues: valuation of two quantitative imaging techniques in comparison with localized proton spectroscopy.

Since lipid protons, consisting mainly of triacylglycerols (TAG), are rather mobile, magnetic resonance imaging (MRI) is ideally suited for the examination of fat-containing tissues such as bone marrow. In contrast to water protons, however, lipid protons are chemically distinct and give rise to at least eight resonance peaks with different T1 and T2 relaxation times in the 1H spectrum. This is why the characterization of fat-containing tissues by quantitative MRI is much more difficult than that of most other tissues. In our study we wanted to examine the accuracy and the potential of a 1H chemical shift imaging (CSI) technique and a multiple spin-echo imaging (MSEI) technique. A stimulated-echo (STEAM) sequence for spatially localized proton spectroscopy was used as the reference method. In the first part of this paper, we describe quantitative imaging experiments which were performed to assess the accuracy of the fat-water separation according to the Dixon method and the bi-exponential decomposition of the MSEI data. For that purpose, we used a two-compartment phantom filled with either an aqueous Gd-DTPA solution and vegetable oil or with two different aqueous Gd-DTPA solutions, respectively. The analysis of the 1H CSI data revealed that the presence of non-methylen protons in neutral fats leads to a slight under-estimation (of about 15%) of the relative fat fraction. The error is described theoretically and verified quantitatively by STEAM measurements. The bi-exponential analysis of the transverse relaxation data, on the other hand, yields reliable T2 values if the relative proton density of both components is higher than 15%. IN the second part of our investigation, the same techniques were applied to acquire data from the subcutaneous fatty tissue, the femoral head, and the lumbar vertebrae of three healthy volunteers. In the bone marrow spectra, only two broad resonances could be resolved; they were superpositions of diverse molecular groups with different T1 and T2 relaxation times. In these cases, localized proton spectroscopy does not provide additional information with respect to 1H CSI. The MSEI data of the three examined fat containing tissue regions were adequately fitted by a bi-exponential function despite the fact that there were much more chemically distinct protons present in fatty tissues.

Adipose Tissue↗

Growth estimation of solid-state koji by covering a cellophane membrane on the mash.

In a solid-substrate fermentation system, fungal growth within a solid mash is an important index for the efficiency of the saccharification and production of metabolites. Estimation of fungal mass in such a heterogeneous solid-substrate systems is difficult and tedious. In this work, the comparison of Aspergillus oryzae which is a common strain for the wine-brewing process cultured on a cellophane membrane placed on a koji juice agar medium and a small scale of steamed rice koji culture was conduted. Experimental results showed that the cellophane membrane technique resembled the steamed rice koji culture and is considered as a convenient and effective way for investigating the growth characteristics and cytology for solid-substrate koji system.

Journal Article↗

The effect of sterilisation on a poly(dimethylsiloxane)/poly(hexamethylene oxide) mixed macrodiol-based polyurethane elastomer.

The effect of various forms of sterilisation on a novel thermoplastic polyurethane elastomer synthesised using poly(hexamethylene oxide) (PHMO) and poly(dimethylsiloxane) (PDMS) macrodiols has been studied. The five sterilisation methods investigated were ethylene oxide (EtO) (single and multiple cycles), gas plasma, steam, vapour phase liquid chemical and gamma-irradiation (single and multiple cycles). Following sterilisation, scanning electron microscopy (SEM) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) were used to assess changes in the surface chemical structure and morphology, and gel permeation chromatography (GPC) and tensile testing were used to examine changes in bulk characteristics. Biostability was assessed using subcutaneous implantation of strained samples in sheep for 6 weeks. The results showed that the properties of the commercially available control material, Pellethane 2363-80A, were significantly affected by exposure to gamma-irradiation, steam and multiple cycles of EtO with aging and implantation compounding the effect. Exposure to a gas plasma sterilisation process resulted in significant degradation in both polyurethanes. A vapour phase liquid chemical sterilisation process caused minimal adverse effects. Sterilisation of the PDMS-based polyurethane using EtO, gamma-irradiation and autoclaving resulted in no significant changes in properties. The material's biostability was also unaffected by exposure to each of these sterilisation processes followed by short-term implantation suggesting that this material is a potential candidate for use in a wide range of implantable medical devices sterilised using commercially available processes. Further biostability studies should be performed to assess the longer-term in vivo biostability of the PDMS-based material sterilised using autoclaving and gamma-irradiation.

Chromatography, Gel↗

Biotransformation of (R)-(+)- and (S)-(-)-citronellol by Aspergillus sp. and Penicillium sp., and the use of solid-phase microextraction for screening.

The biotransformation of (R)-(+)- and (S)-(-)-citronellol by fungi was studied. For screening experiments, solid-phase microextraction (SPME) was used as analytical sampling technique. It was found that sporulated surface cultures of Aspergillus niger were able to convert the substrate into cis- and trans-rose oxides and nerol oxide. The relative contents in the headspace SPME extract of the three bioconversion products cis- and trans-rose oxide and nerol oxide were up to 54, 21 and 12%, respectively. Rose oxide is found in minor amounts in some essential oils, such as Bulgarian rose oil and geranium oil and contributes to its unique odor. It is one of the most important fragrance materials in perfumery in creating rosy notes. Other bioconversion products were 6-methyl-5-hepten-2-one, 6-methyl-5-hepten-2-ol, limonene, terpinolene, linalool and alpha-terpineol. These bioconversion reactions were confirmed by sporulated surface cultures on larger scale and sampling by dynamic headspace sweep and steam distillation solvent extraction. The same conversions were noticed with A. tubingensis and Penicillium roqueforti. This bioconversion was enantioselective since more of the chiral cis- than trans-rose oxide was obtained (cisitrans ratio up to 95/5). Submerged liquid cultures of P. roqueforti yielded two unidentified metabolites after conversion of citronellol (yield up to 5%). The stability and acid-catalyzed conversion of citronellol was also investigated. No chemical oxidation or auto-oxidation products were detected in acidified liquid control broths up to pH 3.5. However, when control tests were run with solid media, acid-catalyzed conversion of the substrate to small amounts of cis- and trans-rose oxides, nerol oxide, linalool and alpha-terpineol was observed at pH 3.5 and when heat treatment (steam distillation solvent extraction) was applied.

Acyclic Monoterpenes↗

Effect of several sterilisation techniques on homogeneous self assembled monolayers.

Understanding how cells sense their environment and are able to regulate their metabolism is of great importance for the success of biomaterials implantation. Self assembled monolayers (SAMs) are in use nowadays to model the surface of such materials. They permit the control of different surface parameters (like chemistry, surface energy and topography) enabling to get a greater insight in cells behaviour when interacting with surfaces and thus, in the future, to enhance surface properties of biomaterials. As sterilisation is the compulsory step for in vitro and in vivo assays with living biological materials, it is important to know how SAMs react under sterilisation techniques in use on biomaterials. In this work, the effect of three types of sterilisation techniques: gamma-irradiation, mostly used on biomaterials, dry heat and steam autoclaving, have been investigated on NH2 and CH3 terminated SAMs. Gamma-irradiation destructs drastically the NH2 and partially the CH3 monolayers by producing oxidative compounds (COOH, C=O, C-OH). The main product induced by gamma-irradiation on NH2 monolayers is carboxylic acid, whereas CH3 shows an important increase in the amount of alcoholic groups. This difference in deterioration is assumed to be due to the higher stability of the CH3 monolayer. Steam autoclaving to a lesser extent gives the same results on NH2 monolayers. Dry heat seems to be the most reliable technique, which can be used on such surfaces as it removes physically adsorbed organic contaminants without affecting the integrity of the surface.

Biocompatible Materials↗

Ophthalmic delivery systems based on drug-polymer-polymer ionic ternary interaction: in vitro and in vivo characterization.

Aim of the work was to develop mucoadhesive eyedrops containing tetrahydrozoline hydrochloride (TZ), a decongestant drug, and based on a ternary interaction drug-polymer-polymer. The anionic polymers assessed were the anionic hyaluronic acid (HA) and polyacrylic acid (PAA), the cationic chitosan (HCS) and the polyelectrolyte gelatin (G). Formulations based on the ternary systems TZ/G/HA, TZ/HCS/HA, TZ/G/PAA and TZ/HCS/PAA at the stoichiometry ratios between cationic and anionic polymers and containing a 10 and 20 fold excess of the anionic polymers were prepared. The formulations were characterized for in vitro mucoadhesive and release properties. The ex vivo/in vivo residence properties were assessed for the formulations that combined the better in vitro mucoadhesive and release properties. The physical stability of the formulations selected was determined following steam sterilization and storage at 25 and 40 degrees C. The synergistic effect of G with HA and PAA improves the mucoadhesion of the formulations while the interaction of HCS with HA and PAA is likely to produce higher neutralization of the anionic polymer charge and minor chain flexibility resulting in a limited mucoadhesion improvement. Both G and HCS participate to control drug release. The selected formulations demonstrate to possess consistency (viscosity) sensitive to the ions of the medium, and probably for this reason the ex vivo/in vivo residence properties could not directly correlated to mucoadhesion and to drug release control properties. However, the formulations are able to maintain levels of TZ detectable until 20 min after the instillation in rabbits, while TZ was not detectable since 3 min after instillation of the drug solution. The physical stability, following steam sterilization and storage, the low viscosity combined with good residence time in conjunctival sac make the TZ/G/20HA the more promising formulation.

Acrylic Resins↗

Microbubbles during radiofrequency catheter ablation: composition and formation.

OBJECTIVES: The purpose of this study was to measure tissue temperatures associated with microbubble formation during radiofrequency (RF) ablation. BACKGROUND: Microbubble formation visualized by echocardiography has been used to indicate excessive tissue heating during RF pulmonary vein isolation. However, little is known about the tissue temperatures associated with microbubble formation. METHODS: Optical fluorometric thermometry probes were used to record tissue temperatures in isolated porcine atrium overlying either lung or esophageal tissue in a saline bath. RF energy was delivered through an irrigated ablation electrode during echocardiographic monitoring for microbubble formation. RESULTS: The maximal recorded tissue temperatures were 81.0 +/- 5.0 degrees C and 88.3 +/- 8.1 degrees C at the time of intermittent (type 1) microbubble formation for lung and esophageal preparations, respectively. During continuous (type 2) microbubble formation, the temperatures were 91.4 +/- 8.2 degrees C and 99.2 +/- 7.8 degrees C, respectively (both P < .001 vs type 1). Tissue temperatures averaged >100 degrees C at the time of "pops." The maximal recorded temperature occurred up to 4 mm deep in the tissues and frequently occurred external to the atrial tissue. The total RF lesion volumes for lung and esophageal preparations were related to the pattern of microbubble formation but not to total power delivered. After generation of type 1 bubbles, up to 60% reductions in RF energy were needed to restore target tissue temperatures of 65 degrees C. Gas chromatographic analysis of the microbubbles was consistent with steam formation. CONCLUSIONS: Microbubble formation during RF ablation represents excessive tissue heating to the point of steam formation. Maximal tissue heating may occur in the adjacent lung and esophagus during cooled ablation.

Animals↗