Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Titanium”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73Linked to original sources

Clinical performance of machined titanium restorations.

In 37 patients 88 titanium restorations were placed during a 1-year period 1990-91. The 69 crowns and 19 fixed partial dentures comprised 147 prosthodontic units. All restorations were fabricated by duplication milling and electrical discharge machining of pure titanium (Procera Technology, Nobelpharma, Gothenburg, Sweden). Based on the results of clinical follow-up, Kaplan-Meier survivor functions were calculated. The survivor rate of 40 metal crowns and pontics was 100%. In 107 porcelain-fused-to-metal units the 3-year survivor rate concerning removal was 95%. When relating the survival to an intact ceramic veneer, the 3-year survivor rate of porcelain-fused-to-metal units was 84%. The quality of the restorations evaluated by the rating system of the California Dental Association was found to be satisfactory in the vast majority of cases. It can be concluded that machined titanium restorations are suitable for clinical use, although not all problems, especially in the field of metal-ceramics have yet been completely solved.

Crowns↗

Backscatter radiation at bone-titanium interface from high-energy X and gamma rays.

Occasionally head and neck cancer patients treated with high-energy X rays and gamma rays have titanium metal dental implants in their maxillae or mandibles. The resulting effect of the bone-metal interface on the radiation dose is of interest. Ionization measurements for 60Co gamma rays and 6 MV and 25 MV X rays were made. A thin-window parallel-plate chamber was used to determine the magnitude of the dose enhancement that was due to the backscattered electrons from titanium. The results showed that for 60Co there is a 15% increase in dose to solid bone at the entrance side of the titanium. For higher energy X rays, the increase in dose was about the same or slightly lower than for 60Co. Monte Carlo calculations substantiated the measurements. This increase in dose fell off rapidly and became negligible at 1-2 mm from the interface. This backscattered dose should be taken into account when planning radiation therapy treatment for patients with dental implants.

Bone and Bones↗

Radiation dose perturbation at tissue-titanium dental interfaces in head and neck cancer patients.

PURPOSE: To determine the dose perturbation effects at the tissue-metal implant interfaces in head and neck cancer patients treated with 6 MV and 10 MV photon beams. METHODS AND MATERIALS: Phantom measurements were performed to investigate the magnitude of dose perturbation to the tissue adjacent to the titanium alloy implants with (100 mu and 500 mu thick) and without hydroxylapatite (HA) coating. Radiographic and radiochromic films were placed at the upper (and lower) surface of circular metal discs (diameter x thickness: 15 x 3.2, 48 x 3.2, 48 x 3.8 mm2) in a solid water phantom and were exposed perpendicular to radiation beams. The dosimeters were scanned with automatic film scanners. Using a thin-window parallel-plate ion chamber, dose perturbation were measured for a 48 x 3.2 mm2 disc. RESULTS: At the upper surface of the tissue-dental implant interface, the radiographic data indicate that for 15 x 3.2 mm2 uncoated, as well as 100 mu coated discs, dose perturbation is about +22.5% and +20.0% using 6 MV and 10 MV photon beams, respectively. For 48 x 3.2 mm2 discs, these values basically remain the same. However, for 48 x 3.8 mm2 discs, these values increase slightly to about +23.0% and +20.5% for 6 MV and 10 MV beams, respectively. For 48 x 3.2 mm2 discs with 500 mu coating, dose enhancement is slightly lower than that obtained for uncoated and 100 mu coated discs for each beam energy studied. At the lower interface for 15 x 3.2 mm2 and 48 x 3.2 mm2 uncoated and 100 mu coated discs, dose reduction is similar and is about -13.5% and -9.5% for 6 MV and 10 MV beams, respectively. For 48 x 3.8 mm2 discs, dose reduction is about -14.5% and -10.0% for 6 MV and 10 MV beams, respectively. For 48 x 3.2 mm2 discs with 500 mu coating, the dose reduction were slightly higher than those for uncoated and 100 mu coated discs. CONCLUSIONS: For the beam energies studied, dose enhancement is slightly larger for the lower energy beam. The results of dose perturbation were similar for 100 mu coated and uncoated discs. These results were slightly lower for the 500 mu coated discs but are not clinically significant. The dosimetry results obtained from radiochromic films were similar to the ones obtained from radiographic film. The dose enhancement results obtained from ion chamber dosimetry are higher than those obtained from film dosimetry. The ion chamber data represent the data at "true" tissue-titanium interface, whereas the ones obtained from film dosimetry represent the data at film-titanium interface.

Biocompatible Materials↗

Cementless or hybrid total elbow arthroplasty with titanium-alloy implants. A study of interim clinical results and specific complications.

Twenty-six patients (32 elbows) with rheumatoid arthritis had a total elbow arthroplasty with insertion of a cementless prosthesis. The humeral component was made of titanium alloy and it was fixed without cement in all elbows. The patients were followed for an average of 3 years 1 month (range, 2 years 2 months to 4 years 4 months). A good result was seen in 25 elbows, a fair result in 2, and a poor result in 5. The reason for the poor results was a breakage of the humeral component at the junctional portion of its stem. In all five of these elbows a marked resorption of bone mass within the condylar portion of the humeral component was observed on the lateral radiograph. The five elbows with a poor result had a revision operation, and in each of these black staining of the soft tissues within the joint was seen. This tissue metallosis due to wear debris of the titanium alloy was responsible for the osteolysis within the condylar portion. It became clear from this study that even in a non-weight-bearing joint, such as the elbow, titanium alloy may wear and result in tissue metallosis when used as a bearing surface of the implant. However, it was also found that in the majority of the elbows an establishment of the biologic fixation of the porous-coated stem could be achieved by use of this alloy.

Adult↗

A prospective study of a titanium femoral component for cemented total hip arthroplasty.

The authors studied the clinical and radiographic results of a modern titanium-alloy femoral stem with a cobalt-chrome-alloy head for use in cemented total hip arthroplasty. One hundred sixteen hips (102 patients) were operated on using modern cement techniques and prospectively followed using the Hospital for Special Surgery hip rating system and standard radiographic criteria. At a mean follow-up period of 4.8 years (range, 2-8 years), 69 hips were rated excellent, 38 good, 4 fair, and 5 poor. A total of 13 femoral components (11%) were radiographically loose according to the criteria of Harris. In 11 of these loose femoral components, debonding or separation at the cement-prosthesis interface, was the initial cause of failure, with bone-cement interface erosions occurring later in five hips. Revision of a loose femoral component has been performed in three hips and is pending in two other hips (4.3%). Significant calcar resorption was seen in only 17 hips (14.6%), and serial measurements of distal femoral cortical widths showed no distal cortical hypertrophy except in one femur. The incidence of loosening with this cemented titanium-alloy femoral component (with a cobalt-chrome-alloy head) is much higher than published reports of similar cobalt-chrome-alloy stems. The authors have abandoned the use of titanium-alloy femoral components for cemented total hip arthroplasty.

Adolescent↗

Topography effects of pure titanium substrates on human osteoblast long-term adhesion.

Classically various treatments are applied to increase the roughness of titanium implants and improve their integration in the tissues. Many in vitro studies have been performed to better understand the mechanisms underlying the adhesion of cells on materials. Frequently, the adhesion is related to the attachment of cells during the first hours of contact with the substrate. For several years, our objective has been to develop experimental methods to evaluate the long-term adhesion of human osteoblasts from some hours to several weeks in order to model in vitro a tissue-like interface. This culture model allows for the formation over 21 days of a complex osteoblast/extracellular matrix/material interface. We recently developed a new parameter called adhesion power (AP) to evaluate this long-term adhesion. In this study, our objective is to check its efficiency in discriminating the long-term adhesion of human osteoblasts on pure titanium substrates with seven different surface morphologies obtained by electro-erosion, sandblasting, polishing, acid-etching and machine-tooling. By scanning electron microscopy, we observed that the human osteoblasts did spread more intimately on surface with low roughness amplitude than on rough ones. However, the AP was higher on rough isotropic surfaces obtained by electro-erosion, sandblasting or acid-etching and lower on smoother surfaces obtained by polishing and machine-tooling. We demonstrated that the AP was pertinent for evaluating human osteoblast's long-term adhesion on pure titanium surfaces with various roughness parameters. Its correlation with the order parameter, which describes the organization of the roughness, confirmed once more that human osteoblasts are more sensitive to the organization and morphology of the roughness than to its amplitude.

Cell Adhesion↗

A bioactive titanium foam scaffold for bone repair.

While titanium has been clinically successful as an orthopedic or dental implant material, performance problems still persist related to implant-bone interfacial strength and mechanical modulus mismatch between titanium and tissue. We describe here the preparation of a titanium foam as a better mechanical match to tissue with surfaces attractive to bone cells through deposition of an organically-modified apatite layer (organoapatite). In a rotating bioreactor, these organoapatite-coated foams are successfully colonized by preosteoblastic cells. Finite element analyses suggest that ingrown tissue in these systems may improve both implant performance and tissue formation through load-sharing and stress distribution. The novel metal-ceramic-polymer hybrid materials described here hold great promise for bone tissue engineering.

3T3 Cells↗

Accuracy of third-order bends of nickel-titanium wires and the effect of high and low pressure during memorizing heat treatment.

This study evaluated the accuracy of third-order bends of nickel-titanium wires and determined the effect of high and low pressure for maintaining the wire shape during memorizing heat treatment. A computer-aided bending machine was used to incorporate 200 randomly determined torsional angles between 0 degrees and 60 degrees into 30 linear 0.016 x 0.022-in NeoSentalloy F80 (GAC International, Central Islip, NY) wires. The torsional bendings were randomized into 2 groups. Bends assigned to group 1 (n = 100) received heat treatment of 1.6 MPa (16 bar) pressure, and bends assigned to group 2 (n = 100) received heat treatment of 50 MPa (500 bar) pressure. Cross-sectional cuts from the bent wires were prepared by using standard metallurgical techniques, and the torsional angles were analyzed under computer control. The results of our study show that third-order bends </= 30 degrees can be made with adequate clinical accuracy with an error of 1.89 degrees +/- 1.75 degrees (0 degrees to 10 degrees ) and 3.57 degrees +/- 1.57 degrees (20 degrees to 30 degrees ), irrespective of the pressure applied. With bends > 30 degrees but </= 40 degrees , the method with the higher pressure offers fundamentally greater precision than that with the lower pressure. With torque bends > 40 degrees , the bending error with both methods is clinically unacceptable. In addition to the variability in the dimension and composition of nickel-titanium wires, the scale of the incorporated plastic deformations makes a substantial contribution to the bending error. As far as permitted by the clinical situation, then, the bend should be distributed over the maximum possible wire length. Third-order bends in the first rectangular pseudoelastic nickel-titanium wires represent an efficient means of effecting torque at an early stage. This individualization allows the full therapeutic potential of these archwires to be exploited right from the initial phase of treatment.

Dental Alloys↗

Treatment of ectopic mandibular second molar with titanium miniscrews.

The use of a Cizeta titanium miniscrew (Cizeta Surgical, Bologna, Italy) for treating an impacted mandibular second molar is presented in this report. The surgical procedure for placing the miniscrew and the subsequent orthodontic management are described, including orthodontic traction with a nickel-titanium closed-coil spring exerting 50 g of force. We concluded that the titanium miniscrew for skeletal anchorage is effective in treating deeply impacted mandibular second molars.

Adult↗

The influence of micro-motion on the tissue differentiation around immediately loaded cylindrical turned titanium implants.

OBJECTIVE: The aim of this study was to evaluate the effect of various degrees of implant displacement on the tissue differentiation around immediately loaded cylindrical turned titanium implants. DESIGN: The experiments were conducted in repeated sampling bone chambers placed in the tibia of 10 rabbits. Tissues could grow into the bone chambers via perforations. Due to its double structure, tissues inside the chamber could be harvested leaving the chamber intact. This allowed several experiments within the same animal. The chambers contained a cylindrical turned titanium implant that was loaded in a well-controlled manner. In each of the 10 chambers, four experiments were conducted with the following test conditions: immediate implant loading by inducing 0 (control), 30, 60 and 90 microm implant displacement, 800 cycles per day at a frequency of 1 Hz, twice a week during a period of 6 weeks. Histological and histomorphometrical analyses were performed on methylmethacrylate histological sections. An ANOVA was conducted on the dataset. RESULTS: The total tissue volume was significantly lowest in the unloaded control condition. The bone volume fraction on the other hand, was significantly larger in the unloaded and 90 microm implant displacement, compared to the 30 microm implant displacement. Bone density increased with increasing micro-motion with significantly higher values for the 60 microm- and 90 microm-test conditions compared to the unloaded situation. The chance to have bone-to-implant contact decreased in case of micro-motion at the tissues-implant interface. CONCLUSION: The magnitude of implant displacement had a statistically significant effect on the tissue differentiation around immediately loaded cylindrical turned titanium implants. Implant micro-motion had a detrimental effect on the bone-to-implant contact in an immediate loading regimen.

Animals↗

Effects of calcium ion implantation on osseointegration of surface-blasted titanium alloy femoral implants in a canine total hip arthroplasty model.

Osteoconductivity of titanium-alloy implants may be improved when surface-modified by calcium ion (Ca2+) implantation. We studied the effects of Ca2+ implantation on osseointegration of a grit-blasted titanium-alloy stem using a canine total hip arthroplasty model. Fifteen dogs underwent bilateral hip arthroplasties and were sacrificed at 1, 6, and 12 months postoperatively. The hip components were evaluated by radiographic, qualitative, and quantitative histology methods. Radiographically and histologically, both Ca(2+)-implanted and non-Ca(2+)-implanted stems were well integrated. Ca(2+)-implanted stems had greater new bone apposition than non-Ca(2+)-implanted stems, although the difference was significant only at 1 month (15.8% +/- 3.5% of the implant perimeter for non-Ca(2+)-implanted, 25.4% +/- 4.7% for Ca(2+)-implanted, P< .05). This result could be related to chronological decrease of the dissolution rate of calcium ions from Ca(2+)-implanted surface. Although further improvement of the Ca2+ implantation technique for a sustained osteoconductive effect is necessary, Ca2+ implantation may be beneficial for early fixation of titanium-alloy implants.

Alloys↗

Early detachment of titanium particles from various different surfaces of endosseous dental implants.

Titanium (Ti) endosseous dental screws with different surfaces (smooth titanium--STi, titanium plasma-sprayed-TPS, alumina oxide sandblasted and acid-etched--Al-SLA, zirconium oxide sandblasted and acid etched--Zr-SLA) were implanted in femura and tibiae of sheep to investigate the biological evolution of the peri-implant tissues and detachment of Ti debris from the implant surfaces in early healing. Implants were not loaded. Sections of the screws and the peri-implant tissues obtained by sawing and grinding were analysed by light microscopy immediately after implantation (time 0) and after 14 days. All samples showed new bone trabeculae and vascularised medullary spaces in those areas where gaps between the implants and host bone were visible. In contrast, no osteogenesis was induced in the areas where the implants were initially positioned in close contact with the host bone. Chips of the pre-existing bone inducing new peri-implant neo-osteogenesis were surrounded by new bone trabeculae. The threads of some screws appeared to be deformed where the host bone showed fractures. Ti granules of 3-60 microm were detectable only in the peri-implant tissues of TPS implants both immediately after surgery and after 14 days, thus suggesting that this phenomenon may be related to the friction of the TPS coating during surgical insertion.

Animals↗

Effects of topography and composition of titanium surface oxides on osteoblast responses.

To investigate the roles of composition and characteristics of titanium surface oxides in cellular behaviour of osteoblasts, the surface oxides of titanium were modified in composition and topography by anodic oxidation in two kinds of electrolytes, (a) 0.2 M H(3)PO(4), and (b) 0.03 M calcium glycerophosphate (Ca-GP) and 0.15 M calcium acetate (CA), respectively. Phosphorus (P: ca.10at%) or both calcium (Ca: 1-6at%) and phosphorus (P: 3-6at%) were incorporated into the anodized surfaces in the form of phosphate and calcium phosphate. Surface roughness was slightly decreased or enhanced (R(a) in the range of 0.1-0.5 microm) on the anodized surfaces. The geometry of the micro-pores in the anodized surfaces varied with diameters up to 0.5 microm in 0.2 M H(3)PO(4) and to 2 microm in 0.03 M Ca-GP and 0.15 M CA, depending on voltages and electrolyte. Contact angles of all the anodic oxides were in the range of 60-90 degrees. Cell culture experiments demonstrated absence of cytotoxicity and an increase of osteoblast adhesion and proliferation by the anodic oxides. Cells on the surfaces with micro-pores showed an irregular and polygonal growth and more lamellipodia, while osteoblasts on the titanium surface used as a control or on anodic oxides formed at low voltages showed many thick stress fibres and intense focal contacts. Alkaline phosphatase (ALP) activity of the cells did not show any correlation with surface characteristics of anodic oxides.

Biocompatible Materials↗

Bone bonding to hydroxyapatite and titanium surfaces on femoral stems retrieved from human subjects at autopsy.

The success of clinical results obtained with many hydroxyapatite (HA)-coated prosthetic designs has deflected attention from the need to extend the life of the HA coating on the device. In the current study the percentages of HA and titanium surfaces to which bone was bonded, on HA-coated and non-coated titanium femoral stems retrieved from human subjects, were evaluated. Plasma-sprayed hydroxyapatite (PSHA)-coated devices demonstrated wide variability in the percentage of the PSHA coating remaining on the stems. The coating was missing from a substantial portion of a stem after only about 6 months of implantation. The percentage of revealed metal to which bone was bonded was significantly less than the percentage of the HA coating demonstrating such bonding. The revealed metal to which bone was bonded was comparable to the same value for a separate group of non-PSHA-coated titanium stems. If HA-coatings degrade over time precipitous decline in performance may occur even after several functional years. Many ultrastructural features of the bone bonded to the HA coatings on these implants from human subjects were comparable to those found on HA-coated devices implanted in a canine model.

Autopsy↗

Whole blood coagulation on protein adsorption-resistant PEG and peptide functionalised PEG-coated titanium surfaces.

The aim of this study was to investigate whole blood coagulation on low blood plasma protein adsorbing surfaces. For this purpose, the polycationic graft copolymer poly(L-lysine)-g-poly(ethylene glycol) (PLL-g-PEG), PLL-g-PEG grafted with a cell adhesive peptide containing the amino acid sequence -Arg-Gly-Asp- (RGD), and PLL-g-PEG with a control peptide -Arg-Asp-Gly- (RDG) were adsorbed onto titanium (oxide), forming stable monomolecular adlayers through electrostatic attraction. Free oscillation rheometry and complementary techniques were used to measure the coagulation time (CT) and other interactions of the surfaces with native whole blood, recalcified platelet-rich plasma (PRP), and recalcified citrated platelet-free plasma (PFP). The results show that the uncoated titanium surfaces (reference) activated platelets and quickly triggered the coagulation cascade via the intrinsic pathway, whereas the PLL-g-PEG surfaces displayed a prolonged CT, approximately 2-3 times longer compared to uncoated titanium. We hypothesise that blood coagulates outside the vascular system independent of low protein adsorption to or activation by surfaces, due to the absence of an active down-regulation of procoagulative processes by the vascular endothelium.

Blood Coagulation↗

Changes in the distribution of laminin-5 during peri-implant epithelium formation after immediate titanium implantation in rats.

Laminin-5 (Ln-5), a component of the basement membrane (BM), regulates epithelial cell migration and adhesion. This study used anti-Ln-5 (gamma2chain) antibody to investigate the distribution of Ln-5 during the formation of peri-implant epithelium (PIE) in rats, and compared it to the distribution of Ln-5 during oral mucosa formation after tooth extraction. One day after extraction, the junctional epithelium (JE) had disappeared. After 3 days, new epithelium formed from the oral sulcular epithelium (OSE) and extended horizontally over the wound with Ln-5-positive cells at the leading edge. After 5 days, the epithelium extending from the OSE on each side of the wound joined and formed additional new epithelium. The new epithelium expressed Ln-5 in the BM. After 1-2 weeks, the oral epithelium (OE) extending from the sides of the wound joined in the center. Thereafter, OSE and new epithelium disappeared, and only OE remained covering the wound. Three days after implantation (titanium), no JE remained. New epithelium formed from the keratinized OSE extending apically with Ln-5-positive cells. After 1-2 weeks, the new epithelium became the PIE and spread further apically facing the implant surface. Ln-5 was expressed at the PIE-connective tissue interface, but not at the implant-PIE interface. Finally, after 4 weeks, Ln-5 was expressed at the implant-PIE interface, and the PIE was non-keratinized epithelium. These findings suggest that Ln-5 induces cell migration during PIE formation, and that PIE originates from OSE. Furthermore, they support the hypothesis that Ln-5 contributes to the attachment of PIE to titanium, regardless of the delay in the synthesis and deposition of Ln-5 at the titanium-PIE interface.

Animals↗

The influence of surface roughness of titanium on beta1- and beta3-integrin adhesion and the organization of fibronectin in human osteoblastic cells.

Mechanisms of cell adhesion and extracellular matrix formation are primary processes in the interaction with the material surface of an implant which are controlled by integrin receptors. The aim of our study was to find out whether beta1- and beta3-integrins of osteoblastic cells sense the surface topography of titanium, and if structural alterations of integrin adhesions were involved in the organization of fibronectin. Pure titanium surfaces were modified by polishing (P), machining (NT), blasting with glass spheres (GB), and blasting with corundum particles (CB) resulting in increasing roughness. Confocal microscopic investigations revealed fibrillar adhesions of beta1- and alpha5-integrins on P, NT, and GB, but on CB with its sharp edges these integrin subunits did not form fibrillar adhesions. beta3 generally appeared in focal adhesions. We observed aligned fibrillar structures of fibronectin on NT not only on the basal site but interestingly, also on the apical cell surface. In contrast, on CB, fibronectin appeared apically clustered. We suggest that this alignment of fibronectin fibrils depends on the directed actin cytoskeleton and in particular, on the capability of the beta1-integrins to form fibrillar adhesions, which is affected by the surface roughness of titanium.

Actin Cytoskeleton↗

Effect of laser therapy on attachment, proliferation and differentiation of human osteoblast-like cells cultured on titanium implant material.

The aim of this in vitro study was to investigate the effect of low-level laser therapy (LLLT) on the attachment, proliferation, differentiation and production of transforming growth factor-ss(1) (TGF-beta(1)) by human osteoblast-like cells (HOB). Cells derived from human mandibular bone were exposed to GaAlAs diode laser at dosages of 1.5 or 3 J/cm(2) and then seeded onto titanium discs. Non-irradiated cultures served as controls. After 1, 3 and 24h, cells were stained and the attached cells were counted under a light microscope. In order to investigate the effect of LLLT on cell proliferation after 48, 72 and 96 h, cells were cultured on titanium specimens for 24h and then exposed to laser irradiation for three consecutive days. Specific alkaline phosphatase activity and the ability of the cells to synthesize osteocalcin after 10 days were investigated using p-nitrophenylphosphate as a substrate and the ELSA-OST-NAT immunoradiometric kit, respectively. Cellular production of TGF-beta(1) was measured by an enzyme-linked immunosorbent assay (ELISA), using commercially available kits. LLLT significantly enhanced cellular attachment (P<0.05). Greater cell proliferation in the irradiated groups was observed first after 96 h. Osteocalcin synthesis and TGF-beta(1) production were significantly greater (P<0.05) on the samples exposed to 3 J/cm(2). However, alkaline phosphatase activity did not differ significantly among the three groups. These results showed that in response to LLLT, HOB cultured on titanium implant material had a tendency towards increased cellular attachment, proliferation, differentiation and production of TGF-beta(1), indicating that in vitro LLLT can modulate the activity of cells and tissues surrounding implant material.

Biocompatible Materials↗