Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Spray drying”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72Linked to original sources
PubMed2003

Spinosad toxicity to pollinators and associated risk.

Spinosad is a natural insecticide derived from an actinomycete bacterium species, Saccharopolyspora spinosa (Mertz and Yao 1990), that displays the efficacy of a synthetic insecticide. It consists of the two most active metabolites, designated spinosyn A and D. Both spinosyns are readily degraded in moist aerobic soil, and field dissipation, which is quite rapid (half-life, 0.3-0.5 d) can be attributed to photolysis or a combination of metabolism and photolysis. Spinosad causes neurological effects in insects that are consistent with the general activation of nicotinic acetylcholine receptors but by a mechanism that is novel among known insecticide compounds. Spinosad has a high level of efficacy for lepidopteran larvae, as well as some Diptera, Coleoptera, Thysanoptera, and Hymenoptera, but has limited to no activity to other insects and exhibits low toxicity to mammals and other wildlife. Although spinosad has low toxicity to most beneficial insects, initial acute laboratory tests indicated that spinosad is intrinsically toxic to pollinators. The hazard of spinosad to bees was evaluated using a tiered approach. Initial acute laboratory exposures were conducted, followed by toxicity of residues of spinosad on treated foliage, greenhouse studies to assess acute as well as chronic toxicity, confined field assessments, and finally full field studies using a variety of crops under typical use conditions. These data were used to assess the potential of adverse effects on foraging bees following the use of spinosad. This research has clearly demonstrated that spinosad residues that have been allowed to dry for 3 hr are not acutely harmful to honeybees when low-volume and ultralow-volume sprays are used. Further, glasshouse and semifield studies have demonstrated that dried residues are not acutely toxic, and although pollen and nectar from sprayed plants may have transient effects on brood development, the residues do not overtly affect hive viability of either the honeybee or the bumblebee. Field studies in which typical application methods of spinosad were used on a variety of crops have demonstrated that spinosad has low risk to adult honeybees and has little or no effect on hive activity and brood development. The collective evidence from these studies indicates that once spinosad residues have dried on plant foliage, generally 3 hr or less, the risk of spinosad to honeybees is negligible.

Agriculture↗
PubMed2003

Effectiveness of GF-120 fruit fly bait spray applied to border area plants for control of melon flies (Diptera: Tephritidae).

In a field study in Hawaii, color-marked protein-deprived and protein-fed female melon flies, Bactrocera cucurbitae Coquillett, were released within canopies of unsprayed sorghum plants (a nonhost of melon flies) outside of a border area of unsprayed or bait-sprayed sorghum plants or open space that surrounded cucumbers, a favored host of melon flies. Application of bait spray to sorghum or sugarcane surrounding host plants of melon flies is a common practice for melon fly control in Hawaii. GF-120 Fruit Fly Bait spray proved very effective in preventing protein-deprived females from alighting on cucumbers (23% of released females were observed dead on bait-sprayed sorghum; 0% were observed alive on cucumbers), but proved less effective in suppressing protein-fed females (14% of released females were observed dead on bait-sprayed sorghum; 11% were observed alive on cucumbers). No females were found dead on unsprayed sorghum. Compared with open space surrounding cucumbers, the presence of unsprayed sorghum as surrounding border area neither significantly enhanced nor significantly inhibited the ability of either type of female with respect to finding cucumbers. Greenhouse cage assays revealed that compared with droplets of water, droplets of GF-120 Fruit Fly Bait spray were highly attractive to protein-deprived females within 1 h of bait spray application to sorghum, but lost about half of their attractiveness within 5 h and all of it within 24 h under the dry greenhouse conditions used for maintaining baited-sprayed sorghum plants in these assays. Laboratory cup assays showed that bait spray droplets remained highly toxic to protein-deprived females 24 h after application, but lost nearly half of their toxicity within 4 d under laboratory exposure and nearly all of it after approximately 8 mm of rainfall. Combined findings suggest that application of GF-120 Fruit Fly Bait spray to nonhost plants for melon fly control either be made often enough to overcome loss of attractiveness of bait spray droplets to females or that bait spray be applied to nonhost plants that are themselves attractive to the females.

Animals↗
PubMed1973

On the multiplication of xerophilic micro-organisms under simulated Martian conditions.

The environmental conditions prevailing on Mars would supposedly favour the existence there of micro-organisms belonging to xerophiles, anaerobes, or micro-aerophiles, oligonitrophiles, which are able to grow in wide temperature intervals. From soil samples taken in deserts and tundra, antarctic halophilic bacteria, able to grow in liquid media containing 20-25% of sodium chloride, were isolated. Some of these cultures appeared to be also osmophilic (growth on media with 50% glucose); they grew at temperatures from 5 degrees C to 50 degrees C, and developed on media without a nitrogen source (oligonitrophiles). Of special interest was the halophilic and osmophilic form of Bacillus megaterium isolated from the Nubian desert. In experiments with this bacterium the following technique was used. A thin film of potato extract agar was prepared on a glass slide and dried over a saturated K2SO4 solution in a closed container up to the level of maximal hygroscopic moisture. The cell suspension was then sprayed on to the agar surface, the film dried again at 45 degrees C, and the glass slide put in the test tube over the saturated solution of K2SO4. The test tube was evacuated, flushed three times with a gas mixture containing 80% CO2 plus 20% Ar, and sealed. Under these conditions the water content of the agar film was equal to the maximal hygroscopic moisture; only the xerophilic form of bacteria are able to develop at this moisture level. This halophilic strain of Bac. megaterium grew satisfactorily under these conditions, as did a halophilic and osmophilic strain of Mycococcus ruber isolated in Antarctica. Both the halophilic strain of Bac. megaterium and that of M. ruber were able to grow under simulated Martian conditions. Xerophily and halophily may be linked. This assumption was supported by relatively high incidence of xerophilic forms among halophilic bacteria isolated from different soils of both high and low salt content as well as from salty muds.

Bacillus megaterium↗
PubMed2005

Distinct effects of sucrose and trehalose on protein stability during supercritical fluid drying and freeze-drying.

Supercritical fluid (SCF) drying has been proposed as an alternative for freeze-drying to stabilize proteins. Here we studied the influence of sucrose and trehalose during SCF drying on the protein stability and the physical powder characteristics of lysozyme and myoglobin formulations. The results obtained with SCF drying were compared with the results after freeze-drying of the same solutions. Aqueous protein solutions, with or without sugar, were sprayed into a SCF mixture of carbon dioxide and ethanol. The dried products were analyzed by residual water measurements, scanning electron microscopy, X-ray powder diffraction and differential scanning calorimetry. After reconstitution the protein structure was studied by UV/VIS, circular dichroism and fluorescence spectroscopy, sodium dodecyl sulfate-polyacrylamide gel electrophoresis and bioactivity assay (lysozyme). The SCF dried and freeze-dried formulations showed comparable water contents, but their physical properties were substantially different. All freeze-dried cakes were amorphous with fully preserved protein structure. SCF dried sucrose-containing formulations showed agglomerated crystalline particles, whereas SCF dried trehalose-containing formulations appeared to consist of amorphous spherical particles. Particle morphology of excipients-free proteins was protein specific. Nearly all SCF dried lysozyme could be readily reconstituted, but for myoglobin significant fractions of SCF protein did not dissolve, especially in the absence of sugars. Covalent aggregation was not observed for the two proteins. For the recovered soluble fractions, the secondary protein structure was preserved. The tertiary structure was preserved for lysozyme, but not entirely for myoglobin. Surprisingly, during SCF drying trehalose was less protective than sucrose for myoglobin.

Animals↗
PubMed2005

Matrix-assisted laser desorption/ionization mass spectrometry of collected bioaerosol particles.

A method was developed for collection and analysis of bioaerosols by matrix-assisted laser desorption/ionization (MALDI) time-of-flight mass spectrometry using a modified Andersen N6 bioaerosol collector. The overall goal of the study was to develop methods for obtaining mass spectra with minimal reagents and treatment steps for potential use in remote collection and analysis systems. Test bioaerosol particles were generated from a nebulized E. coli bacterial suspension and collected on MALDI targets placed in an Andersen N6 single-stage aerosol impactor. The bioaerosols were mixed with matrix either by deposition on a bare target with the matrix solution added later, or by deposition on a target pre-coated with matrix. The matrix compounds alpha-cyano-4-hydroxycinnamic acid (CHCA) and sinapic acid (SA) were tested and the SA matrix was found to give the best results in number of peaks, resolution, and signal-to-noise ratio. Deposition of bioaerosol particles onto the matrix pre-coated target did not produce signal in the m/z region above 1000, but the signal could be recovered with the addition of a 1:1 (v/v) acetonitrile/water solvent. Addition of solvent by pipette to the pre-coated targets after particle deposition recovered signal comparable to the dried-droplet sample preparations, whereas solvent sprayed into the impactor recovered fewer peaks. Deposition on pre-coated targets with post-collection solvent addition was superior to deposition on bare target followed by post-collection addition of matrix solution.

Aerosols↗
PubMed1990

Particulate inhalation during the removal of amalgam restorations.

An aerosol that contains amalgam particles is created when a high-speed hand-piece is used to remove an existing amalgam restoration. Those particles smaller than 10 microns are considered to be fully respirable. This means that a significant percentage of the particles have the potential to travel to the terminal alveoli, where they may become lodged. Long-term exposure to fully respirable particles may compromise a person's respiratory function. Amalgam restorations were placed in the typodont teeth of a mannequin designed to simulate the head and the respiratory tract of a patient. The amalgam restorations were removed under three experimental conditions: dry cut (control), wet cut (water spray) with high-velocity evacuation, and wet cut with high-velocity evacuation and a rubber dam. Particulate exposure was evaluated in the simulated respiratory tracts of the patient and the dentist that were equipped with ambient particle sizing samplers. Use of water spray and high-velocity evacuation significantly reduced patient exposure to particles. The use of a rubber dam, together with water spray and high-velocity evacuation, was responsible for a further significant reduction of exposure to particles when compared with water spray and high-velocity evacuation alone. The dentist, however, was exposed to moderate levels of fully respirable particles for all conditions tested. It is therefore recommended that all dental personnel wear face masks while removing existing amalgam restorations.

Aerosols↗
PubMed2003

Kinetic study of hydrated lime reaction with HCl.

Hydrochloride (HCl) is an acidic pollutant present in the flue gas of most municipal or hazardous waste incinerators. Hydrated lime (Ca(OH)2) is often used as a dry sorbent for injection in a spray reactor to remove HCI. However, due to the short residence time encountered, this control method has generally been found to have low conversion efficiencies which results in the high lime usage and generates large amount of fly ash as solid wastes. A fundamental study was carried outto investigate the kinetics of HCl-lime reaction under simulated flue gas conditions in order to better understand the process thereby providing a basis for an optimized lime usage and reduced fly ash production. The initial reaction rate and conversion of three limes were studied using a thermogravimetric analyzer by varying the gas flow rate, temperature (170-400 degrees C), and HCI concentrations (600-1200 mg/m3) as well as the associated particle size and surface area of the limes. The initial lime conversions were found to rely mostly on the residence time, while the ultimate lime conversions were strongly influenced by temperature and the reaction products. CaOHCI was found to be the primary product in most cases, while for one specific lime, CaCl2 was the ultimate conversion product after an extended time period. The true utilization of lime in flue gas cleanup is thus higher when CaOHCl is considered as the final product than those based on CaCl2 as the final product, which has been commonly used in previous studies. The initial reaction was controlled by diffusion of HCl in gas phase and the subsequent reaction by gaseous diffusion through the developing product layer. Increasing the HCI concentration raised the initial rate as well as conversion. However, overloading the lime with excessive HCI caused clogging at its surface and a drop in the ultimate conversion. Limes with smaller particle diameters and higher surface areas were found to be more reactive. The effect of gas-phase mass transfer was minimized when an optimum flow rate was chosen, and in the absence of internal diffusion the reaction was found to be first order with respect to HCI concentration.

Calcium Hydroxide↗
PubMed2003

Optimized simulation of the control of tsetse flies Glossina pallidipes and G. m. morsitans (Diptera: Glossinidae) using odour-baited targets in Zimbabwe.

In 1984-1985 insecticide-treated targets were deployed in the 600-km2 Rifa Triangle, Zambezi Valley, Zimbabwe. Trap catches of Glossina pallidipes Austen were modelled using a function combining logistic growth with diffusive movement. A simulation routine was linked to a non-linear least-squares optimization programme and fits optimized with respect to population carrying capacities, rates of growth and movement, and to levels of imposed mortality. In March-September 1984, the overall additional mortality was 2% per day of adult female G. pallidipes, increasing thereafter to 8% per day, due to the deployment of more targets, the onset of the hot, dry season and the ground-spraying of the adjoining Zambezi escarpment with DDT. For G. m. morsitans Westwood the corresponding estimates were 1 and 2% per day. For both species, the deployment of four targets km(-2) in a closed population will ensure eradication. For G. m. morsitans a halving of target efficacy would reduce the killing rate to the point where eradication would be unlikely. Estimated daily displacements were c. 200 m for G. m. morsitans and 660 m for G. pallidipes. The lower rate for G. m. morsitans means that, while targets kill this species less effectively, re-invasion of cleared areas is slower. Targets do not markedly affect robust populations outside the deployment area. The Zambian tsetse population adjacent to the Rifa Triangle declined markedly during the experiment, however, suggesting that it is largely maintained by immigration. The methods developed here will be applied to data from other campaigns with the aim of improving the efficiency of tsetse control programmes.

Animals↗
PubMed1991

Transport of feed selenium to different tissues of bulls.

The effects of different types of Se supplementation on the selenium concentration of beef, bovine internal organs and some other tissues were studied. The animals (thirty-two bulls) were kept in four dietary groups from birth until to the age of 13-14 months, and fed on rations containing either 0.03 mg Se/kg (basic level in local feeds), 0.25 mg inorganic Se supplemented as sodium selenite, or 0.25 or 0.4 mg/kg plant Se in dry matter from feed produced by spraying with sodium selenite. Samples of four muscles and ten other tissues and organs were taken at slaughter. Se was determined by an electrothermal atomic absorption method. Se supplementation significantly increased the Se concentration of all tissue samples. The maximum response was caused by the diet containing 0.40 mg/kg plant Se. In muscles, this diet raised the Se concentration by a factor of 10-12. In other samples, the increment was 1.5-7.5 fold, depending on the type of tissue. In general, plant Se raised the Se level more effectively than inorganic Se. Se supplementation did not affect the vitamin E status of muscle tissue.

Animals↗
PubMed2007

Mobility of dimethoate residues from spring broccoli field.

Dimethoate [O, O-dimethyl-S-(N-methylcarbamoyl-methyl) phosphorodithioate] is a broad-spectrum systemic insecticide currently used worldwide and on many vegetables in Kentucky. Dimethoate is a hydrophilic compound (log KOW = 0.7) and has the potential of offsite movement from the application site into runoff and infiltration water. The dissipation patterns of dimethoate residues were studied on spring broccoli leaves and heads under field conditions. Following foliar application of Dimethoate 4E on broccoli foliage at the rate of 0.47 L acre(-1), dimethoate residues were monitored in soil, runoff water collected down the land slope, and in infiltration water collected from the vadose zone. The study was conducted on a Lowell silty loam soil (pH 6.9) planted with broccoli under three soil management practices: (i) soil mixed with municipal sewage sludge, (ii) soil mixed with yard waste compost, and (iii) no-mulch rototilled bare soil. The main objective of this investigation was to study the effect of mixing native soil with municipal sewage sludge or yard waste compost, having considerable amounts of organic matter, on off-site movement of dimethoate residues into runoff and infiltration water following spring rainfall. The initial deposits of dimethoate were 6.2 and 21.4 micro g g(-1) on broccoli heads and leaves, respectively. These residues dissipated rapidly and fell below the maximum residue limit of 2 micro g g(-1) on the heads and leaves after 10 and 14 d, respectively, with half-lives of 5.7 d on broccoli heads and 3.9 d on the leaves. Dimethoate residues detected in top 15 cm of soil (due to droplet drift and wash off residues from broccoli foliage) one day (d) following spraying, were 30.5 ng g(-1) dry soil in the sewage sludge treatment, and 46.1 and 134.5 ng g(-1) dry soil in the yard waste and no mulch treatments, respectively. Water infiltration was greater from yard waste compost treatment than from no mulch treatment, however concentrations of dimethoate in the vadose zone of the three soil treatments did not differ.

Agriculture↗
PubMed2003

Extent of fungal growth on fiberglass duct liners with and without biocides under challenging environmental conditions.

Eight brands of fiberglass duct liners, including three that contained biocides, were exposed to challenging environmental conditions that would promote fungal growth. Twenty-four rectangular sheet metal ducts in three groups of eight ducts per group were lined with the eight selected liners. Each group of ducts was exposed to one of the three test conditions within an environmental chamber for a period of 15 days. These conditions were a) 75 percent RH, b) 75 percent RH plus water spray, c) 75 percent RH plus dry nutrient, and d) 75 percent RH plus water plus nutrient. Viable spores of Aspergillus niger were aerosolized into each duct as seed. On the 16th day, air and surface samples for fungal spores were collected from inside ducts. The results of air sampling using N6 sampler and visual inspection indicated that two out of three biocide-containing liners, Permacote and Toughgard, inhibited fungal growth but only under condition A. The third biocide-containing liner, Aeroflex Plus, was effective even when it was wet (conditions A and B). All three biocide-containing liners failed to inhibit fungal growth under conditions C and D. Among the five other types of liners that did not contain biocides, ATCO Flex with a smooth Mylar coating was more preferable, exhibiting lower fungal activity during conditions A, B, and C. All liners failed under condition D when nutrient and water were added together. Surface sampling using adhesive tape failed to produce representative results, apparently due to rough/porous surface of duct liners. It was concluded that duct liners with biocide treatment could be less promoting to microbial growth under high humidity as long as their surfaces remain clean and water-free. A liner with an impermeable and smooth surface seems to be less subject to microbial growth under most conditions than biocide-containing liners having porous and/or rough surfaces.

Air Pollution, Indoor↗
PubMed1994

Generation of aerosolized drugs.

The expanding use of inhalation therapy has placed demands on current aerosol generation systems that are difficult to meet with current inhalers. The desire to deliver novel drug entities such as proteins and peptides, as well as complex formulations including liposomes and microspheres, requires delivery systems of improved efficiency that will target the lung in a reproducible manner. These efforts have also been spurred by the phase out of chlorofluorocarbons (CFCs) and this has included a directed search for alternative propellants. Consequently, a variety of new aerosol devices and methods of generating aerosols are being studied. This includes the use of freon replacement propellants, dry powder generation systems, aqueous unit spray systems and microprocessor controlled technologies. Each approach has advantages and disadvantages depending upon each principle of action and set of design variables. In addition, specific drugs may be better suited for one type of inhaler device vs. another. The extent to which aerosol generation systems achieve their goals is discussed together with a summary of selected papers presented at the recent International Congress of Aerosols in Medicine.

Administration, Inhalation↗
PubMed1999

Use of gamma scintigraphy to evaluate the performance of new inhalers.

Many new inhaler devices and formulations involving pressurized metered dose inhaler (pMDI), dry powder inhaler (DPI), and liquid spray technologies are currently being developed. Some of these novel drug delivery products deposit a greater percentage of the drug dose in the lungs than a conventional chlorofluorocarbon (CFC)-based pressurized aerosol, hence providing better drug targeting to the required site of drug action. The noninvasive imaging technique of gamma scintigraphy provides an accurate quantification of the amount of drug deposited in the lungs from inhaler devices together with an assessment of deposition in different lung regions. Respimat (Boehringer Ingelheim, Ingelheim am Rhein, Germany) is a novel liquid spray "soft mist inhaler" that more than doubles deposition in the lungs compared with a pMDI and reduces oropharyngeal deposition, thus providing a degree of drug targeting comparable to that from a spacer device. These data suggest that Respimat should be a valuable addition to the range of devices available for inhalation therapy.

Administration, Inhalation↗
PubMed1981

Ingrowing toenails: an evaluation of two treatments.

Most of the procedures used for treating ingrowing toenails cause considerable discomfort and have high failure rates. This study evaluated two methods of treatment: (a) a simple procedure, and (b) angular phenolisation. Patients were seen in a special toenail clinic and were assessed for severity and duration of symptoms. Those with no permanent deformity of the nail fold and with only minor infection were treated by the simple procedure. The nail was nicked and torn down to expose the infected nail fold. The patients were then taught to clean the area, spray it with povidone-iodine dry powder, and pack the nail fold with a twist of cotton-wool. Patients with recurrent or severe ingrowing toenails were treated by angular phenolisation. One hundred patients were treated by the simple procedure and 61 of these had had no recurrence after six months. A total of 280 phenolisations were carried out over 18 months and 272 were successful. The treatments described are simple, effective, and well tolerated and should be considered as alternatives to traditional treatment.

Adolescent↗
PubMed1997

Intake, digestion, and nitrogen utilization by sheep fed tropical legumes with contrasting tannin concentration and astringency.

We conducted an experiment to determine the effects of concentration and astringency of extractable and bound condensed tannins (CT) in tropical legumes on intake, digestibility, and nitrogen (N) utilization by sheep. The test legumes (Desmodium ovalifolium and Flemingia macrophylla) had similar concentrations of extractable CT (90 g/kg DM) but different concentrations of bound CT and astringency of tannins. Chopped, sun-dried forage of each legume was sprayed with either water (control) or polyethylene glycol (PEG, 35 g/kg of DM) to bind extractable CT and fed daily (26 g/kg BW) to eight sheep with ruminal and duodenal cannulas. The sheep also received starch-extracted cassava meal intraruminally (4 g/kg BW) as a constant source of readily fermentable carbohydrates. Intake of the two legumes was not different (P > .05), but it increased an average of 10% (P < .01) when extractable CT were reduced from 90 to 50 g/kg of DM with PEG. Ruminal and total tract digestibilities of OM, NDF, and ADF were greater (P < .01) with D. ovalifolium than with F. macrophylla and increased for both legumes with the addition of PEG. Greater (P < .01) N flow to the duodenum, N absorbed from the intestine, and fecal N were observed with F. macrophylla than with D. ovalifolium. Extraction of CT with PEG resulted in less (P < .05) ruminal escape protein and less (P < .01) fecal N with both legumes, but apparent postruminal N digestion was not affected. Changes in the concentration of extractable CT in tropical legumes can significantly affect forage intake, digestion, and N utilization by sheep.

Animals↗
PubMed1999

Safety and efficacy of once daily intranasal zanamivir in preventing experimental human influenza A infection.

Zanamivir, a potent inhibitor of influenza A and B virus neuraminidases, is protective against experimental human influenza when given intranasally twice daily. We conducted two studies to assess the pharmacokinetics and protective efficacy of a reduced frequency dosing regimen of topical zanamivir. In the first study, 36 uninfected volunteers received a single dose of zanamivir by intranasal spray (6.4 mg), intranasal drops (16 mg) or dry powder oral inhalation (10 mg). At 4 h, median nasal wash concentrations were 50-fold higher after intranasal dosing than after inhalation. Substantial levels (spray group, median 4,596 ng/ml; drop group, 1,239 ng/ml) were detected in nasal wash 48 h after intranasal dosing. In the double-blinded efficacy study, 47 sero-susceptible volunteers were randomized to receive either placebo or zanamivir intranasal spray (6.4 mg). Among the 43 subjects evaluated, decreases in viral shedding occurred in the group receiving one dose of zanamivir 4 h prior to inoculation, whereas no significant benefit was observed in those receiving a single dose 48 h prior to challenge. In the group given three daily doses, reductions were seen in viral shedding and infection. In the two regimens providing zanamivir 4 h prior to inoculation, significant reductions in nasal mucus weight were observed. Decreases in total symptom scores and the incidence of upper respiratory illness also occurred, but they did not reach statistical significance. The efficacy of a single dose of zanamivir given 4 h prior to inoculation supports the hypothesis that influenza virus neuraminidase is essential for initial virus spread through respiratory secretions. These findings indicate that once daily dosing of zanamivir is protective against experimental influenza A infection.

Administration, Intranasal↗
PubMed1999

Minimizing patients' exposure to uncured components in a dental sealant.

BACKGROUND: The authors conducted research to examine the effectiveness of six surface treatments in reducing the oxygen-inhibited layer of a commercially available, freshly polymerized, light-cured unfilled dental sealant. METHODS: Surface treatments of a light-cured sealant (Delton Light Curing Pit & Fissure Sealant, Dentsply Ash) included no treatment (the control treatment), a 20-second exposure to an air/water syringe spray, 20 seconds' manual application of a wet or dry cotton roll, 20 seconds' manual application of pumice with a cotton pellet, and 20 seconds' application of a water/pumice slurry using a prophy cup on a slow-speed handpiece. The authors used high-pressure liquid chromatography to analyze the amount of monomers--bisphenol A glycidyl dimethacrylate, or Bis-GMA; triethylene glycol dimethacrylate, or TEGDMA; and bisphenol A dimethacrylate, or Bis-DMA--remaining after each treatment. RESULTS: A one-way analysis of variance indicated that use of only an air/water spray removed the least (P = .0001) amount of all monomers (only 68.3 percent of the control value). Application of wet or dry cotton reduced equivalent amounts of monomers (86.1 to 88.9 percent of the control value), and the amount of monomer remaining was less than that for the air/water syringe treatment (P = .0001). The use of pumice on either a cotton ball or in a prophy cup achieved the greatest reduction (P = .0001) in total amount of residual monomer (92.9 to 95.3 percent of the control value). CONCLUSIONS: Treatment that used pumice eliminated the greatest amount (from 93 percent to 95 percent of the untreated control values) of any type of residual monomer. A slurry of pumice is significantly more effective in removing the oxygen-inhibited layer from freshly cured sealants than either an air/water spray or wet or dry cotton alone. CLINICAL IMPLICATIONS: Clinicians can most effectively reduce patients' exposure to the uncured components in the oxygen-inhibited layer of sealants by using a mild abrasive, such as pumice, either on a cotton applicator or in a prophy cup.

Analysis of Variance↗
PubMed1999

Effect of fly control on trachoma and diarrhoea.

BACKGROUND: Domestic flies are accepted vectors of diarrhoea, but their role in trachoma transmission has never been quantified and no study has shown that fly control decreases the prevalence of trachoma. We assessed the effect of fly control on public health in a pilot study in Gambian villages. METHODS: We studied two pairs of villages--one pair in the 1997 wet season, and one pair in the 1998 dry season. For each pair, deltamethrin was sprayed for 3 months to control flies in one village whilst the other was used as a control. Fly populations were monitored with traps. We surveyed trachoma at baseline and at 3 months, and collected daily data on diarrhoea in children aged between 3 months and 5 years. FINDINGS: Fly control decreased numbers of muscid flies by around 75% in the intervention villages compared with controls. Trachoma prevalence was similar at baseline (wet season, prevalence in intervention village 8.8% vs control 12.2%; dry season, 18.0% vs 16.0%), but after 3 months of fly control there were 75% fewer new cases of trachoma in the intervention villages (wet season 3.7% vs 13.7%; dry season 10.0% vs 18.9%; rate ratio and relative risk of pooled data 0.25 [adjusted 95% CI 0.09-0.64], p=0.003). There was 22% less childhood diarrhoea in the wet season (14% vs 19%, period prevalence ratio 0.78 [0.64-0.95], p=0.01), and 26% less diarrhoea in the dry season (6% vs 8%; 0.74 [0.34-1.59], p=0.60) compared with controls. INTERPRETATION: Muscid flies are important vectors of trachoma and childhood diarrhoea in The Gambia. Deltamethrin spray is effective for fly control and may be useful for reducing trachoma and diarrhoea in some situations, but further research on sustainable fly-control methods is needed.

Animals↗