Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Engineering”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72Linked to original sources
PubMed2006

Dendrimer crosslinked collagen as a corneal tissue engineering scaffold: mechanical properties and corneal epithelial cell interactions.

Generation 2 polypropyleneimine octaamine dendrimers were used to generate highly crosslinked collagen with mechanical properties that would make it appropriate for use as a corneal tissue-engineering scaffold. Crosslinking of a highly concentrated collagen solution (2-4%) was effected using the water-soluble carbodiimide 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide hydrochloride (EDC). The multifunctional dendrimers were introduced as novel multifunctional crosslinkers after the activation of the carboxylic acid groups of glutamic and aspartic acid residues in collagen. Glutaraldehyde, a common collagen crosslinker, was used as comparison, as was EDC, itself an alternative crosslinker, which forms "zero-length or self-crosslinking". The mechanical properties resultant gels were determined. Young's modulus of the dendrimer crosslinked gels was significantly higher than that observed with the other crosslinkers, increasing to 5 MPa compared with 0.1 MPa for the EDC crosslinked gels. Transmission electron microscopy (TEM) analysis of the gels demonstrated the presence of fibrils in the thermally gelled collagen controls; no fibrils were observed in the dendrimer crosslinked gels. As a result, the optical transparency of the dendrimer crosslinked collagen was significantly better than that of the collagen thermal gels. The EDC and glutaraldehyde crosslinked gels were generally less transparent than those crosslinked with the dendrimers. Glucose permeation results demonstrated that the dendrimer crosslinked collagen had higher glucose permeability than natural human cornea. Dendrimer crosslinked collagen gels supported human corneal epithelial cell growth and adhesion, with no cell toxicity. In comparison, some potentially cytotoxic effects were observed with glutaraldehyde crosslinked collagen. Overall, the dendrimer crosslinked collagen gels showed promising properties that suggest that these might be suitable scaffolds for corneal tissue engineering and potentially other tissue engineering applications.

Biocompatible Materials↗
PubMed2006

In vitro evaluation of chitosan/poly(lactic acid-glycolic acid) sintered microsphere scaffolds for bone tissue engineering.

A three-dimensional (3-D) scaffold is one of the major components in many tissue engineering approaches. We developed novel 3-D chitosan/poly(lactic acid-glycolic acid) (PLAGA) composite porous scaffolds by sintering together composite chitosan/PLAGA microspheres for bone tissue engineering applications. Pore sizes, pore volume, and mechanical properties of the scaffolds can be manipulated by controlling fabrication parameters, including sintering temperature and sintering time. The sintered microsphere scaffolds had a total pore volume between 28% and 37% with median pore size in the range 170-200microm. The compressive modulus and compressive strength of the scaffolds are in the range of trabecular bone making them suitable as scaffolds for load-bearing bone tissue engineering. In addition, MC3T3-E1 osteoblast-like cells proliferated well on the composite scaffolds as compared to PLAGA scaffolds. It was also shown that the presence of chitosan on microsphere surfaces increased the alkaline phosphatase activity of the cells cultured on the composite scaffolds and up-regulated gene expression of alkaline phosphatase, osteopontin, and bone sialoprotein.

3T3 Cells↗
PubMed2006

Equibiaxial strain stimulates fibroblastic phenotype shift in smooth muscle cells in an engineered tissue model of the aortic wall.

Many cells in the body reside in a complex three-dimensional (3D) environment stimulated by mechanical force. In vitro bioreactor systems have greatly improved our understanding of the mechanisms behind cell mechanotransduction. Current systems to impose strain in vitro are limited either by the lack of uniform strain profile or inability to strain 3D engineered tissues. In this study, we present a system capable of generating cyclic equibiaxial strain to an engineered vascular wall model. Type I collagen hydrogels populated with rat aortic smooth muscle cells (RASMCs) were created either as a compacting disk or constrained hemisphere. Both models were adhered to silicone membranes precoated with collagen I, fibronectin, or Cell-Tak and assayed for adhesion characteristics. The best performing model was then exposed to 48 h of 10% strain at 1Hz to simulate wall strain profiles found in vascular aneurysms, with static cultures serving as controls. The finite strain profile at the level of the membrane and the free surface of the construct was quantified using microbeads. The results indicate that the hemisphere model adhered with Cell-Tak had the most stable adhesion, followed by fibronectin and collagen I. Disk models did not adhere well under any coating condition. Uniform strain propagation was possible up to a maximum area strain of 20% with this system. RASMC responded to 10% equibiaxial strain by becoming less elongated, and immunohistochemistry suggested that stretched RASMC shifted to a more synthetic phenotype in comparison to static controls. These results suggest that equibiaxial strain may induce smooth muscle cell differentiation. We conclude that this system is effective in stimulating cells with cyclic equibiaxial strain in 3D cultures, and can be applied to a variety of biomaterial and tissue engineering applications.

Animals↗
PubMed2006

The effect of anisotropic architecture on cell and tissue infiltration into tissue engineering scaffolds.

A common phenomenon in tissue engineering is rapid tissue formation on the outer edge of the scaffold which restricts cell penetration and nutrient exchange to the scaffold centre, resulting in a necrotic core. To address this problem, we generated scaffolds with both random and anisotropic open porous architectures to enhance cell and subsequent tissue infiltration throughout the scaffold for applications in bone and cartilage engineering. Hydroxyapatite (HA) and poly(D,L-lactic acid) (P(DL)LA) scaffolds with random open porosity were manufactured, using modified slip-casting and by supercritical fluid processing respectively, and subsequently characterised. An array of porous aligned channels (400 microm) was incorporated into both scaffold types and cell (human osteoblast sarcoma, for HA scaffolds; ovine meniscal fibrochondrocytes, for P(DL)LA scaffolds) and tissue infiltration into these modified scaffolds was assessed in vitro (cell penetration) and in vivo (tissue infiltration; HA scaffolds only). Scaffolds were shown to have an extensive random, open porous structure with an average porosity of 85%. Enhanced cell and tissue penetration was observed both in vitro and in vivo demonstrating that scaffold design alone can influence cell and tissue infiltration into the centre of tissue engineering scaffolds.

Animals↗
PubMed2006

Long-term stable fibrin gels for cartilage engineering.

It is essential that hydrogel scaffold systems maintain long-term shape stability and mechanical integrity for applications in cartilage tissue engineering. Within this study, we aimed at the improvement of a commercially available fibrin gel in order to develop a long-term stable fibrin gel and, subsequently, investigated the suitability of the optimized gel for in vitro cartilage engineering. Only fibrin gels with a final fibrinogen concentration of 25mg/ml or higher, a Ca(2+) concentration of 20mm and a pH between 6.8 and 9 were transparent and stable for three weeks, the duration of the experiment. In contrast, when preparing fibrin gels with concentrations out of these ranges, turbid gels were obtained that shrank and completely dissolved within a few weeks. In rheological characterization experiments, the optimized gels showed a broad linear viscoelastic region and withstood mechanical loadings of up to 10,000 Pa. Bovine chondrocytes suspended in the optimized fibrin gels proliferated well and produced the extracellular matrix (ECM) components glycosaminoglycans and collagen type II. When initially seeding 3 million cells or more per construct (5mm diameter, 2mm thick), after 5 weeks of culture, a coherent cartilaginous ECM was obtained that was homogenously distributed throughout the whole construct. The developed fibrin gels are suggested also for other tissue engineering applications in which long-term stable hydrogels appear desirable.

Animals↗
PubMed2006

Techniques for biological characterization of tissue-engineered tendon and ligament.

Injuries to tendons and ligaments are prevalent and result in a significant decrease in quality of patient life. Tissue-engineering strategies hold promise as alternatives to current treatments for these injuries, which often fail to fully restore proper joint biomechanics and produce significant donor site morbidity. Commonly, tissue engineering involves the use of a three-dimensional scaffold seeded with cells that can be directed to form tendon/ligament tissue. When determining the success of such approaches, the viability and proliferation of the cells in the construct, as well as extracellular matrix production and structure should be taken into account. Histology and histochemistry, microscopy, colorimetric assays, and real-time reverse transcriptase-polymerase chain reaction (RT-PCR) are techniques that are employed to assess these biological characteristics. This review provides an overview of each of these methods, including specific examples of how they have been used in evaluation of tissue-engineered tendon and ligament tissue. Basic physical principles underlying each method and advantages and disadvantages of the various techniques are summarized.

Animals↗
PubMed2006

Control of in vitro tissue-engineered bone-like structures using human mesenchymal stem cells and porous silk scaffolds.

Natural bone consists of cortical and trabecular morphologies, the latter having variable pore sizes. This study aims at engineering different bone-like structures using scaffolds with small pores (112-224 microm) in diameter on one side and large pores (400-500 microm) on the other, while keeping scaffold porosities constant among groups. We hypothesized that tissue engineered bone-like structure resulting from silk fibroin (SF) implants is pre-determined by the scaffolds' geometry. To test this hypothesis, SF scaffolds with different pore diameters were prepared and seeded with human mesenchymal stem cells (hMSC). As compared to static seeding, dynamic cell seeding in spinner flasks resulted in equal cell viability and proliferation, and better cell distribution throughout the scaffold as visualized by histology and confocal microscopy, and was, therefore, selected for subsequent differentiation studies. Differentiation of hMSC in osteogenic cell culture medium in spinner flasks for 3 and 5 weeks resulted in increased alkaline phosphatase activity and calcium deposition when compared to control medium. Micro-computed tomography (microCT) detailed the pore structures of the newly formed tissue and suggested that the structure of tissue-engineered bone was controlled by the underlying scaffold geometry.

Biocompatible Materials↗
PubMed2006

Tissue-engineered vascular grafts composed of marine collagen and PLGA fibers using pulsatile perfusion bioreactors.

Novel tubular scaffolds of marine source collagen and PLGA fibers were fabricated by freeze drying and electrospinning processes for vascular grafts. The hybrid scaffolds, composed of a porous collagen matrix and a fibrous PLGA layer, had an average pore size of 150+/-50 microm. The electrospun fibrous PLGA layer on the surface of a porous tubular collagen scaffold improved the mechanical strength of the collagen scaffolds in both the dry and wet states. Smooth muscle cells (SMCs)- and endothelial cells (ECs)-cultured collagen/PLGA scaffolds exhibited mechanical properties similar to collagen/PLGA scaffolds unseeded with cells, even after culturing for 23 days. The effect of a mechanical stimulation on the proliferation and phenotype of SMCs and ECs, cultured on collagen/PLGA scaffolds, was evaluated. The pulsatile perfusion system enhanced the SMCs and ECs proliferation. In addition, a significant cell alignment in a direction radial to the distending direction was observed in tissues exposed to radial distention, which is similar to the phenomenon of native vessel tissues in vivo. On the other hand, cells in tissues engineered in the static condition were randomly aligned. Immunochemical analyses showed that the expressions of SM alpha-actin, SM myosin heavy chain, EC von Willebrand factor, and EC nitric oxide were upregulated in tissues engineered under a mechano-active condition, compared to vessel tissues engineered in the static condition. These results indicated that the co-culturing of SMCs and ECs, using collagen/PLGA hybrid scaffolds under a pulsatile perfusion system, leads to the enhancement of vascular EC development, as well as the retention of the differentiated cell phenotype.

Animals↗
PubMed2004

Combustion behaviors of a compression-ignition engine fueled with diesel/methanol blends under various fuel delivery advance angles.

A stabilized diesel/methanol blend was described and the basic combustion behaviors based on the cylinder pressure analysis was conducted in a compression-ignition engine. The study showed that increasing methanol mass fraction of the diesel/methanol blends would increase the heat release rate in the premixed burning phase and shorten the combustion duration of the diffusive burning phase. The ignition delay increased with the advancing of the fuel delivery advance angle for both the diesel fuel and the diesel/methanol blends. For a specific fuel delivery advance angle, the ignition delay increased with the increase of the methanol mass fraction (oxygen mass fraction) in the fuel blends and the behaviors were more obvious at low engine load and/or high engine speed. The rapid burn duration and the total combustion duration increased with the advancing of the fuel delivery advance angle. The centre of the heat release curve was close to the top-dead-centre with the advancing of the fuel delivery advance angle. Maximum cylinder gas pressure increased with the advancing of the fuel delivery advance angle, and the maximum cylinder gas pressure of the diesel/methanol blends gave a higher value than that of the diesel fuel. The maximum mean gas temperature remained almost unchanged or had a slight increase with the advancing of the fuel delivery advance angle, and it only slightly increased for the diesel/methanol blends compared to that of the diesel fuel. The maximum rate of pressure rise and the maximum rate of heat release increased with the advancing of the fuel delivery advance angle of the diesel/methanol blends and the value was highest for the diesel/methanol blends.

Engineering↗
PubMed2006

An experimental and theoretical study of the morphine binding capacity and kinetics of an engineered opioid receptor.

Electrochemical real-time monitoring of ligand binding to an engineered opioid receptor specific for morphine is reported. In the particular systems studied, 90% of the binding was found to be completed after only 85-120 s. Thus, the binding kinetics has proven to be more rapid than previously believed. The observed association rate constant for the morphine binding reaction was calculated to be 215 M(-1)s(-1). A theoretical analysis of the experimental binding data suggested that the binding sites of the engineered opioid receptor could best be described by a model having two populations of binding sites: K(D)=40 microM (13 micromol/g) and K(D)=205 microM (29 micromol/g). Furthermore, a theoretical model was developed in order to explain the observed binding of the engineered opioid receptor. This model suggested that the binding sites on the polymer surface are up to 5.1A deep and they allow 100% of the ligand (morphine) to anchor itself into the site. The predicted theoretical maximum binding capacity for the reported receptor is calculated to be approximately 2 mmol/g polymer (based on an increase of cavity density).

Binding Sites↗
PubMed2005

Non-destructive studies of tissue-engineered phalanges by magnetic resonance microscopy and X-ray microtomography.

One of the intents of tissue engineering is to fabricate biological materials for the augmentation or replacement of impaired, damaged, or diseased human tissue. In this context, novel models of the human phalanges have been developed recently through suturing of polymer scaffolds supporting osteoblasts, chondrocytes, and tenocytes to mimic bone, cartilage, and tendon, respectively. Characterization of the model constructs has been accomplished previously through histological and biochemical means, both of which are necessarily destructive to the constructs. This report describes the application of two complementary, non-destructive, non-invasive techniques, magnetic resonance microscopy (MRM) and X-ray microtomography (XMT or quantitative computed tomography), to evaluate the spatial and temporal growth and developmental status of tissue elements within tissue-engineered constructs obtained after 10 and 38 weeks of implantation in athymic (nude) mice. These two times represent respective points at which model middle phalanges are comprised principally of organic components while being largely unmineralized and later become increasingly more mineralized. The spatial distribution of mineralized deposits within intact constructs was readily detected by XMT (qCT) and was comparable to low intensity zones observed on MRM hydration maps. Moreover, the MRM-derived hydration values for mineralized zones were inversely correlated with mineral densities measured by XMT. In addition, the MRM method successfully mapped fat deposits, collagenous tissues, and the hydration state of the soft tissue elements comprising the specimens. These results support the application of non-destructive, non-invasive, quantitative MRM and XMT for the evaluation of constituent tissue elements within complex constructs of engineered implants.

Animals↗
PubMed2005

Tissue-engineering approaches for axonal guidance.

Owing to the profound impact of nervous system damage, extensive studies have been carried out aimed at facilitating axonal regeneration following injury. Tissue engineering, as an emerging and rapidly growing field, has received extensive attention for nervous system axonal guidance. Numerous engineered substrates containing oriented extracellular matrix molecules, cells or channels have displayed potential of supporting axonal regeneration and functional recovery. Most attempts are focused on seeking new biomaterials, new cell sources, as well as novel designs of tissue-engineered neuronal bridging devices, to generate safer and more efficacious neuronal tissue repairs.

Animals↗
PubMed2006

The engineering of craniofacial tissues in the laboratory: a review of biomaterials for scaffolds and implant coatings.

Tissue engineering is a rapidly growing interdisciplinary field that focuses on the interactions between cells, growth factors, and scaffolds to produce replacement tissue and organs. Recent developments in tissue engineering technology include refinements in isolation and differentiation of progenitor cells, 3-D printing technology to produce scaffolds, new biomaterials for scaffolds, and growth factor delivery systems. The purpose of this article is to review advances in biomaterials, scaffolds, and implant coatings for craniomaxillofacial (bone) tissue engineering.

Absorbable Implants↗
PubMed2025

Charting the development and engineering of CRISPR base editors: lessons and inspirations.

CRISPR base editors (BEs) have introduced a new chapter in precise genome editing. The brief but fruitful history of BE development documents many case studies that not only lay the foundation of base-editing technology but are also instrumental to future protein engineering efforts. In this review, we summarize the development and engineering of various BEs with a focus on recent progress. These include traditional cytosine and adenine base editors (CBEs and ABEs), novel TadA-derived CBEs, transversion BEs, dual BEs, and CRISPR-free BEs. We discuss each aspect of the workflow and highlight the successes and challenges encountered in the engineering process.

Gene Editing↗
PubMed2003

Non-canonical amino acids in protein engineering.

Methods for engineering proteins that contain non-canonical amino acids have advanced rapidly in the past few years. Novel amino acids can be introduced into recombinant proteins in either a residue-specific or site-specific fashion. The methods are complementary: residue-specific incorporation allows engineering of the overall physical and chemical behavior of proteins and protein-like macromolecules, whereas site-specific methods allow mechanistic questions to be probed in atomistic detail. Challenges remain in the engineering of the translational apparatus and in the design of schemes that can be used to encode both canonical and non-canonical amino acids.

Amino Acids↗
PubMed2005

Engineering blood vessels from stem cells: recent advances and applications.

Endothelial cells organized into blood vessels are critical for the formation and maintenance of most tissues in the body and are involved in regulating physiological processes such as angiogenesis, inflammation and thrombosis. Endothelial cells are of great research interest, because of their potential to treat vascular diseases and to stimulate the growth of ischaemic tissue. They can be used to engineer artificial vessels, repair damaged vessels, and to induce the formation of vessel networks in engineered tissues. For such clinical applications, proliferating human endothelial progenitor cells can be isolated from adult tissues or embryonic stem cells. Recently, these cells were successfully used to engineer single vessels and to stimulate capillary networks, both in vitro and in vivo.

Animals↗
PubMed2006

Metabolic engineering in plants for human health and nutrition.

In many cases, multiple pathway enzymes need to be upregulated to produce a significant yield of a desired product. Technical advances in simultaneously manipulating multiple steps in plant metabolic pathways include the use of transcription factors, such as MYB12. By upregulating the genes of an entire pathway, these factors can greatly simplify multienzyme engineering. Furthermore, synthetic zinc-finger protein transcription factors can now be designed to target specific pathway enzymes, such as tocopherol methyltransferases. When multiple steps in a pathway are upregulated, previously unsuspected facets of the pathway might be revealed, such as the newly uncovered bifunctional substrate preference of the key regulatory enzyme in tocopherol (vitamin E) biosynthesis, homogentisate phytyltransferase. The engineering of desired traits, such as long-chain omega-3 polyunsaturated fatty acids, can require entirely new pathways to be introduced into a plant. Recent advances in genomics and gene expression technology have made this type of complex metabolic engineering highly feasible.

Food, Genetically Modified↗
PubMed2006

Plastid biotechnology: prospects for herbicide and insect resistance, metabolic engineering and molecular farming.

Transgene expression from the chloroplast (plastid) genome offers several attractions to plant biotechnologists, including high-level accumulation of foreign proteins, transgene stacking in operons and a lack of epigenetic interference with the stability of transgene expression. In addition, the technology provides an environmentally benign method of plant genetic engineering, because plastids and their genetic information are maternally inherited in most crops and thus are largely excluded from pollen transmission. During the past few years, researchers in both the public and private sectors have begun to explore possible areas of application of plastid transformation in plant biotechnology as a viable alternative to conventional nuclear transgenic technologies. Recent proof-of-concept studies highlight the potential of plastid genome engineering for the expression of resistance traits, the production of biopharmaceuticals and metabolic pathway engineering in plants.

Agriculture↗