Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “STEAM”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71Linked to original sources

[Use of partially hydrolyzed and untreated straw meal in the feeding of breeding sows. 3. Nutrient digestibility, feed passage time and mineral balance with the addition of variously treated straw materials compared to concentrate feeding alone].

In studies with 16 breeding sows of the country species the feed value of straw materials and their fitness for use were ascertained in a long-term experiment. On the feeding basis of a concentrate ration (IV) untreated (I), HCl treated (II = HCl treatment without steaming) and partly hydrolysed straw meal (III = HCl treatment with subsequent steaming) were tested. In the course of the experiment and at a nutrient level of 1 (maintenance requirement), the digestibility of the organic matter of the ration and that of some major and trace elements, N and mineral balances as well as feed passage rate and water excretion in faeces were ascertained at selected measuring times. The following mean results were achieved: The integration of all straw materials tested lead to a significant reduction of the digestibility of the organic matter of the total ration, the least negative effect was caused by partly hydrolysed straw meal (III). The fractions crude protein, crude fibre and N-free extracts were mainly affected. Straw meal integration had a gravidity-conditioned influence on the daily N balance. Increased N excretion in faeces could only be compensated by non-pregnant animals by a decreased N excretion in urine. The mineral balance (Ca, P, Na, Cu and Mn) remained largely uninfluenced by the straw supplement. The feed passage rate was reduced by the use of all straw meal variants to ca. 50% of the value measured after the sole feeding of concentrate (IV). Feed passage rate and water excretion in faeces were approximately reciprocal. The digestibility of the organic matter of the straw materials ascertained according to the difference method amounted to 7.4 (I), 18.1 (II) and 27.9% (III); that of the N-free extracts in the same sequence to 10.0, 22.0 and 34.9%. The calculated energetic feed value was for I = 70.7, for II = 154.9 and for III = 240.7 EFUpig/kg DM.

Animal Feed↗

When the biological indicator is positive: investigating autoclave failures.

A series of positive biological indicators in steam autoclaves from different hospital departments within the same building were traced to blocked steam traps on building condensate lines. The steps taken during the investigation and a protocol for management of positive biological indicators are described.

Equipment Failure Analysis↗

Effects of dense, high-volume, artificial surfactant aerosol on a heated exhalation filter system.

OBJECTIVE: To evaluate a supplemental heated filter system during mechanical ventilation with continuous nebulization of an artificial surfactant by a new, high-volume nebulizer. DESIGN AND METHODS: A new nebulizer system, containing artificial surfactant, provided half of a 20-L minute ventilation and the remainder of this minute ventilation was provided by a commonly used mechanical ventilator. Ventilation sources were joined in the inspiratory limb of the breathing circuit, which was connected to a test lung system. A supplemental filter system was placed upstream of the ventilator's heated filter in the expiratory limb of the circuit. Circuit pressures at the inlet of the supplemental filter (P1), between the filters (P2), and after the ventilator expiratory filter (P3) were monitored and recorded. Nebulizer canisters containing artificial surfactant were replaced every 4 hrs. The performance of four supplemental filters in continuous use was examined. Another four filters were each used over 4 hrs, steam autoclaved, and reused. SETTINGS: The ventilator was set at a rate of 20 breaths/min, with a tidal volume of 0.5 L, a flow rate of 40 L/min, and positive end-expiratory pressure of 10 cm H2O. The nebulizer provided an equal volume and flow rate so that the delivered tidal volume was 1.0 L with a flow rate of 80 L/min. RESULTS: Ventilator failure and/or excessive airway pressure caused by increased filter resistance occurred at a mean of 7.3 +/- 1.3 (SD) hrs of continuous ventilation. Mean P1-peak increased from 67.5 +/- 8.2 to 94.0 +/- 10.7 cm H2O (p < .001) and P1-baseline increased from 9.3 +/- 1.0 to 53.5 +/- 17.1 cm H2O (p = .014). Filters that were autoclaved after 4 hrs of ventilation and reused lasted a total of 7.0 +/- 1.3 hrs. Mean P1-peak increased from 68.9 +/- 4.9 to 84.8 +/- 19.1 cm H2O and P1-baseline increased from 9.5 +/- 1.7 to 30.8 +/- 14.2 cm H2O (p < .05). CONCLUSIONS: The supplemental filter system was able to protect the ventilatory exhalation sensors for approximately 7 hrs at a minute ventilation of 20 L/min. Steam sterilization did not extend the supplemental filter life.

Aerosols↗

The effect of sterilization methods on the light transmission characteristics and structure of light-curing tips.

The purpose of this study was to investigate the effect of various sterilization methods on the light transmission and the structural characteristics of two light-curing tips. Twenty tips from two light-curing devices [Elipar II (EL) and Heliolux II (HL)] were classified into four groups. The tips in groups A to C were subjected to sterilization with 0.2% sodium dichloroisacyanurate solution (Presept), 2% glutaraldehyde solution (Cidex) (2 h cycle(-1)) and water-steam autoclave (120 degrees C, 1 bar, 12 min cycle(-1)), respectively. A total of 2100 sterilization cycles was performed for all methods tested. The transmitted light intensity (TLI) was measured at specific sterilization time intervals by a curing radiometer (Model 100, Demetron). The final % TLI reduction of the sterilized tips was calculated relative to the corresponding control ones. The topography and composition of the front curing tip surfaces were determined using scanning electron microscopy combined with electron probe microanalyser. Autoclaving caused the lowest final TLI decrease (EL: 15%, HL: 19%) compared with Presept (EL: 60%, HL: 42%) and with Cidex (EL: 68%, HL: 52%). Cidex yielded higher TLI drop than Presept for both types of tips examined. Elipar tips were found to be more sensitive than Heliolux tips to both chemical sterilization techniques. Total or partial coating of the tip surfaces with insoluble salts after sterilization with Presept and Cidex was detected, mainly composed of Ca, Cl, Al, Pd and Mg traces. No changes were noted on the surfaces after autoclave. Water-steam autoclave is safer than the 0.2% sodium dicloroisocyanorate and 2% glutaraldehyde chemical sterilization agents regarding the light transmission characteristics and the structure of the light-curing tips.

Dental Disinfectants↗

Dental care of infectious patients in Denmark, 1986-1993: theoretical considerations and empirical findings.

Changes in infection control and behavior and attitudes towards HIV-infected patients from 1986 to 1992/93 were studied among a random sample of 335 Danish dentists; previous studies among random samples of Danish dentists served as references. 249 (74.3%) returned a mailed questionnaire together with a time, steam, temperature (TST) control indicator strip processed in their steam autoclaves, 3.4% of the autoclaves had not sterilized properly, which was an insignificant decrease compared to 1986. Overall, infection control had improved since 1986. In 1992/93 17.3% of dentists surveyed reported use of gloves always: in 1986 0.8% did so. Many (60.2%) reported at least one needlestick or cut accident within the last year. The number of dentists who were willing to treat HIV-infected patients and the number of clinics that found they could treat infectious patients safely had increased from 56.1% to 78.7% and from 43.0% to 66.8%, respectively. Other attitudinal dimensions, for example views on secrecy of HIV test results and HIV screening policy, had not changed. A conceptual model based on the theory of reasoned action formed the framework for multiple logistic regression analysis with two different outcomes: Willingness to treat HIV-infected individuals and Treatment of HIV-infected patients. In particular, expected staff problems turned out to have a high explanatory value (odds ratio = 18.2) if HIV-infected patients were received. In both models Certainty about hygienic precautions had some explanatory value. The findings may give some clues about how to plan and implement future continuing education on infection control and attitudinal and behavioral aspects of caring for infectious patients.

AIDS Serodiagnosis↗

Model for inactivation and disposal of infectious human immunodeficiency virus and radioactive waste in a BL3 facility.

A method is described for autoclaving low levels of solid infectious, radioactive waste. The method permits steam penetration to inactivate biologic waste, while any volatile radioactive compounds generated during the autoclave process are absorbed. Inactivation of radiolabeled infectious waste has been problematic because the usual sterilization techniques result in unacceptable radiation handling practices. If autoclaved under the usual conditions, there exists a high probability of volatilization or release of radioisotopes from the waste. This results in the radioactive contamination of the autoclave and the laboratory area where steam is released from the autoclave. Our results provide a practical method to inactivate and dispose of infectious radioactive waste. For our research, Bacillus pumilus spore strips and vaccinia virus were used as more heat-resistant surrogates of the human immunodeficiency virus (HIV). These surrogates were used because HIV is difficult to grow under most conditions and is less heat tolerant than the surrogates. In addition, B. pumilus has defined cell death values, whereas such values have not been established for HIV. Both B. pumilus and vaccinia virus are less hazardous to work with. The autoclave method is time efficient and can be performed by laboratory personnel with minimal handling of the waste. Furthermore, waste site handlers are able to visually inspect the solid waste containers and ascertain that inactivation procedures have been implemented.

Disinfection↗

Pulmonary deposition of aerosols by different mechanical devices.

With a new method for easy labeling of beta 2-agonists we measured intra- and extrapulmonary aerosol deposition after the administration of a bolus from a metered-dose inhaler at residual volume (RV) inhaling after a pause of 2 s and after immediate administration into the inspiratory flow at functional residual capacity (FRC). Immediate administration during a slow inspiratory vital capacity maneuver gives the highest intrapulmonary deposition (30-40%). Compressed air and ultrasonic nebulizers with a particle distribution pattern of 2-5 micron aerodynamic mass median diameter (AMMD) allow in normal subjects to achieve an intrapulmonary deposition of 30-60% during standardized tidal breathing at rest, the magnitude of the deposition depending mainly on each subject's larynx geometry. The outlet system leads to different deposition patterns in aerosol generators with the same AMMD. Many commercially available aerosol generators do not fulfill the criteria for any intrapulmonary aerosol deposition. For drug administration into the lungs, condensation aerosol generators ('steam boiler nebulizers') are useless as well as compressed-air, ultrasonic and steam driven nebulizers with a particle size of more than 10 micron AMMD.

Adrenergic beta-Agonists↗

Currently practised sterilization methods--some inadvertent consequences.

Currently used sterilization techniques such as ethylene oxide, gamma irradiation, and steam sterilization could introduce inadvertent consequences, especially in polymeric materials. These could have far-reaching effects on the biocompatibility of the materials. Some of these consequences are reviewed and a typical example of the effect of steam sterilization on the properties and biocompatibility of polyethylene terephthalate is discussed.

Biocompatible Materials↗

Hydrothermal pretreatment conditions to enhance ethanol production from poplar biomass.

Pretreatment has been recognized as a key step in enzyme-based conversion processes of lignocellulose biomass to ethanol. The aim of this study is to evaluate two hydrothermal pretreatments (steam explosion and liquid hot water) to enhance ethanol production from poplar (Populus nigra) biomass by a simultaneous saccharification and fermentation (SSF) process. The composition of liquid and solid fractions obtained after pretreatment, enzymatic digestibility, and ethanol production of poplar biomass pretreated at different experimental conditions was analyzed. The best results were obtained in steam explosion pretreatment at 210 C and 4 min, taking into account cellulose recovery above 95%, enzymatic hydrolysis yield of about 60%, SSF yield of 60% of theoretical, and 41% xylose recovery in the liquid fraction. Large particles can be used for poplar biomass in both pretreatments, since no significant effect of particle size on enzymatic hydrolysis and SSF was obtained.

Biomass↗

Strategies to enhance the enzymatic hydrolysis of pretreated softwood with high residual lignin content.

Pretreatment of Douglas-fir by steam explosion produces a substrate containing approx 43% lignin. Two strategies were investigated for reducing the effect of this residual lignin on enzymatic hydrolysis of cellulose: mild alkali extraction and protein addition. Extraction with cold 1% NaOH reduced the lignin content by only approx 7%, but cellulose to glucose conversion was enhanced by about 30%. Before alkali extraction, addition of exogenous protein resulted in a significant improvement in cellulose hydrolysis, but this protein effect was substantially diminished after alkali treatment. Lignin appears to reduce cellulose hydrolysis by two distinct mechanisms: by forming a physical barrier that prevents enzyme access and by non-productively binding cellulolytic enzymes. Cold alkali appears to selectively remove a fraction of lignin from steam-exploded Douglas-fir with high affinity for protein. Corresponding data for mixed softwood pretreated by organosolv extraction indicates that the relative importance of the two mechanisms by which residual lignin affects hydrolysis is different according to the pre- and post-treatment method used.

Cell Culture Techniques↗

A novel nonchemical method for quarantine treatment of fruits: California red scale on citrus.

A process for removing or killing California red scale, Aonidiella aurantii (Maskell), from citrus fruit as a postharvest treatment was evaluated. The process subjects the fruit to vacuum, steam, and vacuum that physically removes red scale from the fruit and kills those scales that are not removed from the fruit. Different numbers of cycles and steam temperatures were compared for efficacy in removing scale from lemons or killing those that remained. Multiple (two to three) cycles removed up to 96% of first molt scales on the fruit, but they were much less effective in removing other stages, especially those that had advanced beyond the second instar. However, it was extremely effective in killing the scales remaining on the fruit. Although this process does not eliminate cosmetic damage caused by scale presence, it might be used in combination with high-pressure washers currently used in packing houses to allow importers and exporters to meet the most stringent quarantine requirements. Because of its killing power, this technique should be tried on other insects and commodities to see whether it can be substituted for certain uses of methyl bromide.

Animals↗

Production of porous carbonaceous adsorbent from physical activation of sewage sludge: application to wastewater treatment.

With an objective of production of carbonaceous sorbent for industrial effluent treatment, physical activation by steam of biological sludge collected from the municipal wastewater treatment plant of Nantes (France) was studied and optimised using experimental design. Thus, this activation process consists of a carbonisation under N2 atmosphere at 600 degrees C for 1 h, followed by a thermal oxidation using steam (760 degrees C, 0.5 h, 2.5 L/Umin). The global mass yield of the process is equal to 38%. The thermal treatment allows a specific surface area of up to 225 m2/g to be reached, the porous structure being composed of both micropores and mesopores. The content of acidic surface groups is 0.71 mEq/g whereas that of basic surface groups is 0.55 mEq/g. The adsorption properties of the sorbent made from sludge are estimated with regard to various pollutants representative of industrial pollution of wastewaters and compared with those of commercial activated carbon. Whereas the adsorption capacities of organic micropollutants are quite low because of proportionality to the microporosity, the important mesoporosity of the sorbent leads to interesting properties for macromolecules removal from aqueous solutions, such as dyes (q(m) = 175-200 mg/g). Furthermore, the surface functional groups and Ca2+ ions within the materials allow high copper ion adsorption capacities of 140 mg/g to be obtained. Finally, a techno-economic approach shows that the sludge activation process seems to be economically competitive with regard to incineration.

Adsorption↗

Influence of processing on the comparative feeding value of barley for feedlot cattle.

Ninety-six crossbred steers were used in a 172-d feedlot growth performance trial to determine the effects of type processing on the comparative feeding value of barley in a 90% concentrate finishing diet. Treatments were: 1) steam-flaked corn (SFC; density = .31 kg/L); 2) dry-rolled barley (DRB; density = .39 kg/L); 3) steam-rolled barley, coarse roll (SRB-C, density = .39 kg/L); and 4) SRB, thin roll (SRB-T, density = .19 kg/L). The ADG was similar (P > .10) across barley treatments, averaging 1.29 kg/d. Feed intake (P < .05) was lower for SRB than for DRB. Diet NE was greater (P < .05) for SRB than for DRB. Feed intake was lower (P < .05) for SFC than for barley diets. The influence of grain processing on characteristics of digestion was evaluated using four Holstein steers (average BW = 230 kg) with cannulas in the rumen and proximal duodenum. Ruminal and total tract digestibility of OM and starch were lower (P < .05) for DRB than for SRB. Ruminal and total tract digestibility of OM and starch were similar (P > .10) for SRB-C and SRB-T. However, passage of nonammonia N was markedly increased (26.9%, P < .01) with SRB-T compared with SRB-C. This increase in ruminal N efficiency was due partly to reduced ruminal degradation of feed N (23.4%, P < .01) and partly to increased microbial N synthesis (13.3%, P > .10). The comparative feeding value of DRB, SRB-C, and SRB-T in this study was 90, 92, and 96% the value of SFC, respectively.(ABSTRACT TRUNCATED AT 250 WORDS)

Animal Feed↗

Influence of tempering on the feeding value of rolled corn in finishing diets for feedlot cattle.

Crossbred yearling steers (n = 125; 372 kg) were used in a 109-d finishing trial. Steers were fed an 88% concentrate diet containing 65% corn (DM basis) as 1) dry rolled corn (DRC); 2) tempered rolled corn (TRC), 43 mg surfactant (SarTemp)/kg corn; 3) TRC, 172 mg surfactant/kg corn; 4) TRC, 430 mg surfactant/kg corn; and 5) steam-flaked corn (SFC). Corn moisture was greater (3.5%, P < .01) for TRC than for DRC but less (10%, P < .05) than for SFC. Starch enzymatic reactivity was less for TRC than for either DRC (18%, P < .05) or SFC (42%, P < .01). Tempering increased the integrity of rolled corn and reduced the amount of particles less than 2 mm in diameter by 54% (P < .01). Steam flaking corn increased (P < .01) proportion (78%) of the grain having a particle size distribution of greater than 8 mm, as compared with TRC (25%) and DRC (3%). Compared with DRC, tempering enhanced (P < .10) ADG (9%), feed efficiency (5%), and dietary NE (3%). Daily weight gain was similar (P > .10) for TRC and SFC. Feed efficiency (P < .10) and dietary NE (P < .01) were greater (6%) for SFC than for TRC. There were no differences (P > .10) between DRC and TRC in ruminal and total tract digestion of OM, N, and starch, and in ruminal microbial efficiency. Ruminal digestion of OM decreased (linear effect, P < .05) and ruminal microbial efficiency increased (linear effect, P < .05) with increasing surfactant concentration. Ruminal digestion of OM and starch, and flow of nonammonia N to the small intestine were greater (31, 56, and 14%, respectively, P < .01) for SFC than for TRC. Postruminal and total tract digestion of OM, N, and starch, and dietary DE were greater (P < .01) for SFC than for TRC. We concluded that tempering corn will enhance animal performance. Increasing the concentration of surfactant used in tempering may enhance ruminal microbial efficiency and lean tissue growth.

Adipose Tissue↗

Sorghum grain flake density and source of roughage in feedlot cattle diets.

Feedlot performance was studied in a 262-d trial using 126 crossbred beef steers (182 kg initial BW) to determine whether source of dietary roughage influences performance and carcass characteristics by steers fed growing (112 d) and finishing (150 d) diets with various flake densities (FD) of steam-processed sorghum grain. A 3 x 3 arrangement of treatments (two pens of seven steers each) was used, with dietary roughages being chopped alfalfa hay or 50:50 mixtures (equal NDF basis) of cotton-seed hulls or chopped wheat straw with alfalfa hay; sorghum grain was steam-flaked to densities of 386, 322, and 257 g/L (SF30, SF25, and SF20, reflecting bushel weight in pounds). The effects of these same FD on nutrient digestibilities were determined in three experiments with 24 crossbred steers fed finishing diets containing each of the roughage sources. No interactions between FD and roughage type were detected in any performance or carcass measurements (P > .10). Intake of DM decreased linearly (P < .05) in response to decreased FD. Daily rate and efficiency of gain were not altered (P >.10) by FD. Decreasing FD decreased linearly (P < .05) dressing percentage and fat thickness, but not other carcass measurements. Dietary roughage did not affect (P >.10) daily gains or carcass measurements, but DM intake was lower and feed efficiencies were superior (P < .05) when alfalfa hay was the sole source of roughage. Cottonseed hulls and wheat straw were relatively less valuable in the low roughage finishing diets than in higher roughage growing diets. Digestibilities of starch increased linearly as FD was decreased (P = .02) when steers were fed diets containing wheat straw, but not for alfalfa hay or cottonseed hull diets. Digestibilities of DM did not vary with changes in FD; however, changes in CP, NDF, and ADF digestibilities due to FD seemed to differ among experiments. In conclusion, performance and carcass measurement responses by growing-finishing steers to differences in sorghum grain FD were not related to source of dietary roughage, but diets with alfalfa hay as the only source of roughage were most efficient. Decreasing FD of sorghum grain below 386 g/L (30 lb/bu) was not advantageous in improving performance or carcass merit by growing-finishing steers.

Animal Feed↗

A comprehensive system for washing, pre-disinfecting and sterilizing of dental and surgical instruments.

PURPOSE: The purpose of this study was to test and describe in detail a newly developed comprehensive system for washing, pre-disinfecting and sterilizing of dental and surgical instruments. MATERIALS AND METHODS: The system consists of a combined washing and steam-operated pre-disinfection apparatus and newly developed trays, in which assorted instruments can be washed and disinfected without handling individual instruments. The system was subjected to a large number of tests. RESULTS: The cleaning efficiency of blood-soiled instruments was found to be excellent. The disinfection of dental instruments contaminated with bacteria, yeast and non-enveloped virus showed decimal reduction factors that were equivalent to sterilization. The trays had optimal sealing qualities. Their steam permeability was perfect even after prolonged use in N-, S- and B-type autoclaves. However, long-term tests in a clinic revealed shortcomings with regard to insufficient drying of instruments in the wash/disinfection apparatus. Furthermore, the mechanical stability of the polysulfonate tray covers needs to be improved. Occasionally, after extended use, the fit of the filters in metal trays became inadequate, in particular when trays were sterilized for 18 min at 134 degrees C for a prolonged period of time. CONCLUSION: In spite of the above-mentioned shortcomings, the system shows great labor and cost-saving potential, allowing a new approach to instrument recirculation and workflow in the dental office.

Dental Instruments↗

Sterilization of hepatitis B surface antigen-contaminated materials.

The sterilizing conditions of HBs Ag-contaminated materials were studied by means of the inactivation of the antigenicity (infectivity being thought to be lost when HBs Ag is inactivated). HBs Ag-coated beads and the serum from an HBs Ag-positive patient were used. After each sterilizing procedure, the antigenicity was studied by radioimmunoassay. HBs Ag-positive serum is easily inactivated by boiling and by steam under pressure; however, HBs Ag-coated beads require increased steam under pressure. For sterilizing HBs Ag-contaminated materials, 30 minutes at 132 degrees C is recommended.

Blood↗

[Dietary fiber in flour and concentration of rapeseed protein].

Crude fibre content of rapeseed meal and protein concentrate, obtained from raw and steamed rapeseed, was determined. Moreover, in the protein concentrate and in crude fibre the levels of calcium and magnesium were measured. The protein concentrate contained more crude fibre than the meal. Polysaccharides accounted in crude fibre from meal for more than 80% of its total composition, and in crude fibre from the protein concentrate for only ca. 70%. Steaming of rapeseed led to an increase in calcium and magnesium contents of crude fibre from meal and decrease in the protein concentrate.

Brassica↗