Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Elementary Particles”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71Linked to original sources

Structural organization of the major autolysin from Streptococcus pneumoniae.

LytA amidase is the best known bacterial autolysin. It breaks down the N-acetylmuramoyl-L-alanine bonds in the peptidoglycan backbone of Streptococcus pneumoniae and requires the presence of choline residues in the cell-wall teichoic acids for activity. Genetic experiments have supported the hypothesis that its 36-kDa chain has evolved by the fusion of two independent modules: the NH2-terminal module, responsible for the catalytic activity, and the COOH-terminal module, involved in the attachment to the cell wall. The structural organization of LytA amidase and of its isolated COOH-terminal module (C-LytA) and the variations induced by choline binding have been examined by differential scanning calorimetry and analytical ultracentrifugation. Deconvolution of calorimetric curves have revealed a folding of the polypeptide chain in several independent or quasi-independent cooperative domains. Elementary transitions in C-LytA are close but not identical to those assigned to the COOH-terminal module in the complete amidase, particularly in the absence of choline. These results indicate that the NH2-terminal region of the protein is important for attaining the native tertiary fold of the COOH terminus. Analytical ultracentrifugation studies have shown that LytA exhibits a monomer <--> dimer association equilibrium, through the COOH-terminal part of the molecule. Dimerization is regulated by choline interaction and involves the preferential binding of two molecules of choline per dimer. Sedimentation velocity experiments give frictional ratios of 1.1 for C-LytA monomer and 1.4 for C-LytA and LytA dimers; values that deviated from that of globular rigid particles. When considered together, present results give evidence that LytA amidase might be described as an elongated molecule consisting of at least four domains per subunit (two per module) designated here in as N1, N2, C1, and C2. Intersubunit cooperative interactions through the C2 domain in LytA dimer occur under all experimental conditions, while C-LytA requires the saturation of low affinity choline binding sites. The relevance of the structural features deduced here for LytA amidase is examined in connection with its biological function.

Calorimetry, Differential Scanning↗

Application of liquid dynamics theory to the glass transition.

In monatomic liquid dynamics theory, the system moves among a large number of intersecting nearly harmonic valleys in the many-particle potential energy surface. The same potential surface underlies the motion of atoms in the supercooled liquid. As temperature is decreased below the melting temperature, the motion among the potential valleys will begin to freeze out, and the system will pass out of equilibrium. It is therefore necessary to develop a nonequilibrium theory, based on the Hamiltonian motion. The motion is separated into two distinct parts, and idealized as follows: (a) the vibrational motion within a single valley is assumed to be purely harmonic, and remaining in equilibrium; and (b) the transit motion, which carries the system from one valley to another, is assumed to be instantaneous, and energy and momentum conserving. This idealized system is capable of exhibiting a glass transition behavior. An elementary model, incorporating the idealized motion, is the independent atom model, originally developed to treat self diffusion in monatomic liquids. For supercooled liquids, in the independent atom model, the vanishing of self diffusion at a finite temperature implies the same property for the transit probability. The vanishing of the transit probability at a finite temperature supports the view that transits are not merely thermally activated, but are controlled by phase-space correlations. For supercooled liquid sodium, the transit probability has Vogel-Tamann-Fulcher temperature dependence. The independent atom model is shown to be capable of exhibiting all the essential glass transition properties, including rate dependence of the glass transition temperature, and both exponential and nonexponential relaxation.

Journal Article↗

[Insufficient ventilation as the etiology of illness perception in an elementary school].

PURPOSE: Two years after renovation of the classrooms in a primary school (installation of insulated windows and closing of the ventilation shaft) pupils and teachers complained about offensive odours, irritation of the eyes and of the nose, complaints of the respiratory tract, headaches and disturbed mental concentration. The presented study determines the causes, suggests measures for help and checks their effectiveness by means of measurements. METHODS: Before starting our measurements, the air quality had already been assessed by an expert. There was no evidence of elevated concentrations of air contaminants. Because of the content of phthalate plasticizers and flame retardants in the linoleum sealants there was an offensive odour. To determine the cause, the air in the subjective mostly affected classroom was analysed for phthalate plasticizers, their metabolites and alkyl phosphates. We also made aerosol measurements with a cascade impactor, determined bacterial counts in the air, and measured the indoor climate and the internal air flow. RESULTS: The concentrations of phthalate plasticizers and their metabolites in the air were not elevated significantly. The screening for alkyl phosphates was negative. The amount of inhalable particles was 0.046 mg/m3. The bacterial count in the air was negligible. On the other hand the indoor climate during the heating period in winter was remarkably changed. The average room temperature was 26 degrees C (reaching a maximum of 36 degrees C with direct sunlight in the classroom), the average humidity was 21% (minimum 7%) and the change of air was approximately 0.5 per hour. Reopening the ventilation shaft and tilting of only one window resulted in a much greater rate of air change. After installation of temperature regulators and regular use of the venetian blinds in the classroom, the room temperature and the relative humidity during the morning lessons were, as a rule, normalised. Among both pupils and teachers the reports of offensive odours and health disorders were subsequently clearly reduced. CONCLUSIONS: To determine the cause of health disorders indoors, it is apparently to be of great importance to carry out measurements of the climate as well as to assess the level of air contaminants. By use of modern energy-saving construction possible effects on the indoor climate should be be taken into account during the planning stage of changes to avoid health disorders resulting from changed interior climate conditions.

Air Pollution, Indoor↗

Respiratory health and PM10 pollution. A daily time series analysis.

This study evaluated changes in respiratory health associated with daily changes in fine particulate pollution (PM10). Participants included a relatively healthy school-based sample of fourth and fifth grade elementary students, and a sample of patients with asthma 8 to 72 yr of age. Elevated PM10 pollution levels of 150 micrograms/m3 were associated with an approximately 3 to 6% decline in lung function as measured by peak expiratory flow (PEF). Current day and daily lagged associations between PM10 levels and PEF were observed. Elevated levels of PM10 pollution also were associated with increases in reported symptoms of respiratory disease and use of asthma medication. Associations between compromised respiratory health and elevated PM10 pollution were observed even when PM10 levels were well below the 24-h national ambient air quality standard of 150 micrograms/m3. Associations between elevated PM10 levels, reductions in PEF, and increases in symptoms of respiratory disease and asthma medication use remained statistically significant even when the only pollution episode that exceeded the standard was excluded. Concurrent measurements indicated that little or no strong particle acidity was present.

Adolescent↗

Exploring molecular motors and switches at the single-molecule level.

Single-molecule techniques have propelled an impressive number of biophysical studies during the last decade. From relatively simple video-microscopy techniques, to sophisticated manipulation and detection apparata, single-molecule techniques are capable of tracking the movements and the reaction trajectories of single enzymatic units. By observing microspheres attached to biomolecules it is possible to follow the motion of molecular motors, or to detect conformational "switching" induced by regulatory proteins. Micromanipulation tools like optical tweezers have been widely applied to understand the mechanisms of linear molecular motors, and have allowed the measurement of the elementary steps and the forces produced by several motor proteins, including myosin, kinesin, and dynein. New experimental assays based on magnetic or optical "wrenches," which are able to apply and detect torques on rotary motors and biopolymers, are opening new possibilities in this field. Here, established and emerging magneto-optical manipulation and video-tracking techniques are reviewed, in the perspective of single molecular motors and regulatory proteins studies.

Adenosine Triphosphate↗

Type III secretion, contact-dependent model for the intracellular development of chlamydia.

The medically significant genus Chlamydia is a class of obligate intracellular bacterial pathogens that replicate within vacuoles in host eukaryotic cells termed inclusions. Chlamydia's developmental cycle involves two forms; an infectious extracellular form, known as an elementary body (EB), and a non-infectious form, known as the reticulate body (RB), that replicates inside the vacuoles of the host cells. The RB surface is covered in projections that are in intimate contact with the inclusion membrane. Late in the developmental cycle, these reticulate bodies differentiate into the elementary body form. In this paper, we present a hypothesis for the modulation of these developmental events involving the contact-dependent type III secretion (TTS) system. TTS surface projections mediate intimate contact between the RB and the inclusion membrane. Below a certain number of projections, detachment of the RB provides a signal for late differentiation of RB into EB. We use data and develop a mathematical model investigating this hypothesis. If the hypothesis proves to be accurate, then we have shown that increasing the number of inclusions per host cell will increase the number of infectious progeny EB until some optimal number of inclusions. For more inclusions than this optimum, the infectious yield is reduced because of spatial restrictions. We also predict that a reduction in the number of projections on the surface of the RB (and as early as possible during development) will significantly reduce the burst size of infectious EB particles. Many of the results predicted by the model can be tested experimentally and may lead to the identification of potential targets for drug design.

Algorithms↗

[Lipoproteins as a specific circulatory transport system].

In accordance with the systemic approach, each circulatory transport system is highly specific and transports an elementary substance from cell to cell in the hydrated medium. In the author's opinion, the lipoprotein system has also a functional specificity and carries the elementary substance fatty acid in the blood stream. A great variety of fatty acids, the individuality of their physicochemical properties, great stereochemic differences of saturated and polyenic fatty acids make their transport virtually impossible. The steric individuality of fatty acids can be reduced if the acids are covalently bonded by a matrix as complex lipids. For formation of complex lipids, nature prefers esterification of fatty acids with alcohols which have a varying hydrophoby, such as glycerol, sphingosine, cholesterol, cetyl alcohol. The steric differences of saturated and polyenic fatty acids form a basis for their being structurized in different lipids. Triacyl glycerides are a transport form of saturated, monounsaturated fatty acids and their transforms and give rise to a crystalline phase. Phospholipids and cholesterol esters are a transport form of mainly polyunsaturated fatty acids in the polar phase in the former case and in the crystalline phase in the latter one. The individual apolipoproteins structure complex lipids into individual lipoprotein particles and transport them in the hydrated medium of blood flow. Saturated fatty acids chiefly transport lipoprotein particles formed by apoB-48- and apoB-100-isoproteins. Polyenic acids transport mainly high-density apoA-1-lipoprotein particles, which makes up a main physiological function of the latter. Cholesterol is nothing more than a matrix; it reesterifies polyenic fatty acids from the polar transport form of phospholipids into the unpolar transport form of cholesterol esters. Cholesterol esterification of polyenic fatty acids may structure complex lipid in the unpolar phase and transport it to the cells via apoB-100-ligand-receptor interaction, which is considered to be a key stage in the multistage process of active transport to the cells of polyenic fatty acids. However, the significant differences of active and inactive transport of polyenic fatty acids in the blood stream await a separate consideration.

Biological Transport, Active↗

[In vitro self assembly of supermolecular structures after spontaneous disassembly of carotovoricins].

The self-assembly of supramolecular structures (empty sheaths and polysheaths of the macromolecular Erwinia carotovora bacteriocins) was studied by electron microscopy in the course of 1- to 2-year incubation of phage particles at 4 degrees C. This study showed that the empty sheaths and polysheaths of the bacteriocins of eight E. carotovora strains spontaneously assemble at the self-assembly centers (or crystallization centers), which have a diameter of 26-65 nm and contain a dense proteinaceous material. The self-assembly center consists of two components, a primer and the structural protein of contracted sheaths. Empty sheaths assembled in the crystallization centers are polar structures synthesized through the stepwise head-to-tail polymerization of monomeric units. The supramolecular structures of two E. carotovora 62A bacteriocins are assembled in a different way. At the early stages of their self-assembly, a reticular structure is formed, which then transforms into very long polysheaths composed of monomers. Along with polysheaths, rounded or lamplike structures 33-117 nm in size composed of the subunits of contracted sheath are produced. Carotovoricins may serve as suitable objects for the study of the self-assembly of elementary biological structures.

Bacteriocins↗

Purification and partial characterization of the major outer membrane protein of Chlamydia trachomatis.

Elementary bodies (EB) of Chlamydia trachomatis serotypes C, E, and L2 were extrinsically radioiodinated, and whole-cell lysates of these serotypes were compared by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Autoradiography of the polypeptide profiles identified a major surface protein with an apparent subunit molecular weight of 39,500 that was common to each C. trachomatis serotype. The abilities of nonionic (Triton X-100), dipolar ionic (Zwittergent TM-314), mild (sodium deoxycholate and sodium N-lauroyl sarcosine), and strongly anionic (SDS) detergents to extract this protein from intact EB of the L2 serotype were investigated by SDS-PAGE analysis of the soluble and insoluble fractions obtained after each detergent treatment. Only SDS readily extracted this protein from intact EB. Sarkosyl treatment selectively solubilized the majority of other EB proteins, leaving the 39,500-dalton protein associated with the Sarkosyl-insoluble fraction. Ultrastructural studies of the Sarkosyl-insoluble EB pellet showed it to consist of empty EB particles possessing an apparently intact outer membrane. No structural evidence for a peptidoglycan-like cell wall was found. Morphologically these chlamydial outer membrane complexes (COMC) resembled intact chlamydial EB outer membranes. The 39,500-dalton outer membrane protein was quantitatively extracted from COMC by treating them with 2% SDS at 60 degrees C. This protein accounted for 61% of the total COMC-associated protein, and its extraction resulted in a concomitant loss of the COMC membrane structure and morphology. The soluble extract obtained from SDS-treated COMC was adsorbed to a hydroxylapatite column and eluted with a linear sodium phosphate gradient. The 39,500-dalton protein was eluted from the column as a single peak at a phosphate concentration of approximately 0.3 M. The eluted protein was nearly homogeneous by SDS-PAGE and appeared free of contaminating carbohydrate, glycolipid, and nucleic acid. Hyperimmune mouse antiserum prepared against the 39,500-dalton protein from serotype L2 reacted with C. trachomatis serotypes Ba, E, D, K, L1, L2, and L3 by indirect immunofluorescence with EB but failed to react with serotypes A, B, C, F, G, H, I, and J, with the C. trachomatis mouse pneumonitis strain, or with the C. psittaci feline pneumonitis, guinea pig inclusion conjunctivitis, or 6BC strains. Thus, the 39,500-dalton major outer membrane protein is a serogroup antigen of C. trachomatis organisms.

Antigens, Bacterial↗

Effect of penicillin on the multiplication of meningopneumonitis organisms (Chlamydia psittaci).

Although formation of infectious particles of meningopneumonitis organism in L cells was completely inhibited by 1 or more units of penicillin per ml, multiplication of reticulate bodies was observed, by light microscopy, in the presence of 200 units of penicillin per ml in stained smears of infected cells. When reticulate bodies were purified from cultures containing penicillin after 18, 30, and 45 hr of incubation, continuously increasing yields were obtained. When penicillin was added to infected cultures 0 to 15 hr after infection, no increase in infectivity was observed at 40 hr, but when antibiotic was added between 20 and 35 hr, partial synthesis of infectious particles was observed at 40 hr. On the other hand, removal of penicillin from an infected culture before 15 hr after infection did not affect the final yields of infectivity when assayed at 40 hr, but elimination of penicillin after 20 hr resulted in a decrease in infectivity. In suspensions of (32)P-labeled purified reticulate bodies grown in cultures containing penicillin and harvested 18 and 40 hr after infection, the (32)P distributions obtained by acid fractionation were similar to those of reticulate bodies from penicillin-free cultures. Cell membranes of reticulate bodies were also prepared from 40-hr cultures with penicillin. The size and shape of purified membranes, as seen by electron microscopy, and their amino acid compositions were similar to membranes prepared from reticulate bodies grown without penicillin, except that very small structures were observed in membranes from cultures containing penicillin. These results indicated that penicillin does not inhibit reproduction of reticulate bodies and formation of their cell membranes, but does inhibit the formation of elementary body cell envelopes.

Amino Acids↗

[Preparations of preoral sustained-release preparations with a biological polymer base. 5 (correct title supplied from Table of Contents)].

Triethylamine and chloroacetic acid were used for the preparation of polyglycolic acid. The polyester was characterized by elementary analysis, IR-spectroscopy, X-ray-test and the determination of the molecular mass. With regard to the pharmaceutical and technological characterization the determination of the grain size, moisture content, flowability and the parameters for the direct compression were carried out. Polyglycolic acid was compressed together with caffeine as model drug. These tablets distinguished by a great strength, but in water a rapid decay took place. A greater stability in artificial gastrointestinal fluids was obtained, if the tablets were plastified. Release investigations showed then the desired retard effect.

Acrylic Resins↗

Effect of alkali on the structure of cell envelopes of Chlamydia psittaci elementary bodies.

Suspensions of isolated cell envelopes of infectious elementary bodies (EB) of Chlamydia psittaci at alkaline pH showed a rapid, extensive decrease in absorbance, accompanied by the release of a cell envelope component in a sedimentable form. This phenomenon was observed both at 0 C and with envelopes which had been previously heated to 100 C. Monovalent and divalent cations effectively inhibited the turbidity loss, whereas ethylenediaminetetraacetate (EDTA) caused an accelerated decrease in turbidity. The turbidity loss observed after incubation of the envelopes at alkaline pH could be reversed to the level of the initial value by dialysis against distilled water containing Mg2+. Thin-section electron photomicrographs of purified EB exposed to alkaline buffer with EDTA revealed the loss of the internal contents of cells, but these cells still maintained their round shapes. The cell surface of treated EB appeared pitted in negatively stained preparations, whereas intact EB had a smooth surface. Electron microscopic studies on negatively stained preparations of the clear supernatant obtained after the treatment of the envelope with alkaline buffer containing EDTA demonstrated the presence of spherical particles, approximately 6 to 7 nm in diameter, and rodlike particles, which appeared to be made up of two or more spherical particles.

Alkalies↗

Electron Microscopic Observations on the Fine Structure of Cell Walls of Chlamydia psittaci.

L-cell cultures were infected with elementary bodies (EB) of meningopneumonitis organisms. Cell walls were prepared from reticulate bodies (RB), which are the intracellular developmental forms into which EB are converted, and from EB at appropriate times after infection. When fragmented EB cell walls were shadowcast with platinum palladium alloy, about one-half of the fragments were seen to be composed of hexagonally arrayed structures on the inner side of the cell wall. When EB cell walls were negatively stained with phosphotungstic acid, they all showed this fine structural array. These macromolecular units were estimated to be about 18 nm in diameter. RB cell walls, harvested at various times after infection, were similarly stained; about 20% of RB walls at 15 hr after infection showed traces of these regular structures, but only 2% of them had the structures at 24 hr. When RB cell walls prepared from penicillin-containing culture were examined, they were observed to be similar to RB without penicillin. When EB cell walls were treated with formamide at 160 C, and then centrifuged in a 10 to 40% potassium tartrate density gradient, hexagonal particles about 20 nm in diameter were obtained as a middle band in the gradient column. These particles were not obtained from RB cell walls harvested from cultures with or without penicillin. It is concluded that the particles are macromolecular subunits located on the inner side of the EB cell walls, that the subunits probably provide the structural rigidity found in the EB, and that their synthesis is inhibited by penicillin.

Journal Article↗

Scanned intensity modulations for 50 MV photons.

Optimization of the dose distributions by individual beam compensation is a useful tool in conformal radiation therapy. Intensity modulation by electromagnetic scanning of a narrow elementary beam allows fast dose delivery and causes little change in beam quality compared with other methods, especially for high energies such as 50 MV. Intensity modulated beams from the MM50 accelerator were measured and compared with calculations based on Monte Carlo simulations. Good agreement between measurements and calculations were found, typically within 1% for central dose profiles. The steepest wedge angle that was produced with the scanning beam technique was of 45 degrees or 3.5% cm(-1) for a 20 cm x 20 cm field, slightly varying with depth. The elementary 50 MV photon 'pencil beam' for a full range, high-z bremsstrahlung target, is a wide dose distribution at 10 cm depth in water which limits the modulation gradient and hence the complexity of the modulation by the scanning of a photon pencil beam only. Scanned wedge beam distributions were modelled in the treatment planning system and a pelvic treatment with three fields was used to illustrate a clinical application. The resulting dose volume data were compared for different radiation qualities but with similar beam portals. 'Energy modulation' by field matching with lower photon energies was performed to sharpen the penumbra towards organs at risk.

Electromagnetic Fields↗

Catalytic role of gold in gold-based catalysts: a density functional theory study on the CO oxidation on gold.

Gold-based catalysts have been of intense interests in recent years, being regarded as a new generation of catalysts due to their unusually high catalytic performance. For example, CO oxidation on Au/TiO(2) has been found to occur at a temperature as low as 200 K. Despite extensive studies in the field, the microscopic mechanism of CO oxidation on Au-based catalysts remains controversial. Aiming to provide insight into the catalytic roles of Au, we have performed extensive density functional theory calculations for the elementary steps in CO oxidation on Au surfaces. O atom adsorption, CO adsorption, O(2) dissociation, and CO oxidation on a series of Au surfaces, including flat surfaces, defects and small clusters, have been investigated in detail. Many transition states involved are located, and the lowest energy pathways are determined. We find the following: (i) the most stable site for O atom on Au is the bridge site of step edge, not a kink site; (ii) O(2) dissociation on Au (O(2)-->2O(ad)) is hindered by high barriers with the lowest barrier being 0.93 eV on a step edge; (iii) CO can react with atomic O with a substantially lower barrier, 0.25 eV, on Au steps where CO can adsorb; (iv) CO can react with molecular O(2) on Au steps with a low barrier of 0.46 eV, which features an unsymmetrical four-center intermediate state (O-O-CO); and (v) O(2) can adsorb on the interface of Au/TiO(2) with a reasonable chemisorption energy. On the basis of our calculations, we suggest that (i) O(2) dissociation on Au surfaces including particles cannot occur at low temperatures; (ii) CO oxidation on Au/inactive-materials occurs on Au steps via a two-step mechanism: CO+O(2)-->CO(2)+O, and CO+O-->CO(2); and (iii) CO oxidation on Au/active-materials also follows the two-step mechanism with reactions occurring at the interface.

Journal Article↗

Removal of hydrogen sulfide by Chlorobium thiosulfatophilum in immobilized-cell and sulfur-settling free-cell recycle reactors.

Bioconversion of hydrogen sulfide to elementary sulfur by the photosynthetic bacterium Chlorobium thiosulfatophilum was studied in immobilized-cell and sulfur-settling free-cell recycle reactors. The cells immobilized in strontium alginate beads excreted elementary sulfur and accumulated it as crystal in the bead matrices, which made it possible that the reactor broth remained clear and the light penetrated the reactor deeper than with the free cells. In comparison with the free cells, the immobilized cells required 30% less light energy at a H2S removal rate of 2 mM/(L.h) and showed an activity of 2.4 times that of the free cells. However, in 40 h after the reaction the deterioration of the H2S removal efficiency became significant due to the accumulation of sulfur in the beads. The scanning electron micrograph (SEM) and energy-dispersive X-ray spectrometer (EDS) studies showed that the sulfur in the beads existed within a layer of 0.4 mm from the bead surface. In the sulfur-settling free-cell recycle reactor, about 80% of the sulfur excreted by the free cells could be removed in a settler. The 4-L fed batch reactor with the settler improved the light transmission to result in a H2S removal rate of 3 mumol/(mg of protein.h), 50% higher than that without it. The settling recycle reactor was much better in the removal of H2S than the immobilized-cell reactor because the former was a continuous system with the constant removal of sulfur particles by settling and of spent medium by supplying fresh medium at the same rate as the filtering rate of the reactor broth, while the latter was essentially a batch system where toxic metabolites and produced sulfur could not be removed.

Air Pollutants↗

Relationship between radical generation by urban ambient particulate matter and pulmonary function of school children.

The mechanisms by which particulate matter (PM) produces adverse effects on the respiratory system, such as pulmonary dysfunction in children, are largely unknown. However, oxidative stress is thought to play an important role. Various chemical compounds in ambient particulate matter, including transition metals and aromatic organic compounds, may contribute to adverse effects through intrinsic generation of reactive oxygen species (ROS). It was hypothesized that ROS generation by PM, as determined through electron spin resonance (ESR) spectroscopy, may be negatively associated with pulmonary function in school children. PM(2.5), PM(10), and total suspended particulates (TSP) were sampled at the playgrounds of six elementary schools in the city of Maastricht, the Netherlands. All children (8-13 yr) from the six schools were asked to undergo spirometry. Multivariate linear regression models were constructed to evaluate associations between oxygen radical formation by PM and lung function. The radical-generating capacity per microgram PM correlated negatively to forced expiratory volume in 1 s (FEV(1)) and forced expiratory flow at 50% (FEF(50%)) of forced vital capacity (FVC). The data indicate that chemical features that contribute to intrinsic generation of ROS may be relevant for PM risk assessment.

Adolescent↗

Spectrophotometric skin measurements correlate with EORTC/RTOG-common toxicity criteria.

PURPOSE: It was investigated whether the elementary EORTC/RTOG-CTC score (Common Toxicity Criteria) for radiotherapy skin reactions correlates with spectrophotometric measurements of the skin color. PATIENTS, MATERIAL, AND METHODS: In 41 patients irradiated for unilateral breast cancer the regular scoring by CTC was done during radiotherapy. In parallel, a total of 4,920 spectrophotometric measurements to determine the skin color were performed at baseline, at the beginning of radiotherapy, and at 20, 40 and 60 Gy. The nonirradiated contralateral breast was used for control measurements. RESULTS: As expected, the skin color (especially red) depended on the radiation dose applied to the skin. The objective spectrophotometric measurements were found to correlate well with the subjective CTC scores. CONCLUSION: For classification of acute radiation toxicity there seems to be no need to replace the common CTC scoring by technical methods.

Aged↗