Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “STEAM”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70Linked to original sources

Bioavailability of zinc in rats fed on tuna as a protein source in the diet.

The objective of this study was to investigate the dietary zinc bioavailability in diets containing raw, cooked, steamed, and canned tuna as a protein source in the diet, and to evaluate different means of preparation, as well as various storage periods of the canned tuna, which was prepared according to industrial standards. Sterilized oil-free canned tuna was also made. The biological assays used for the study of the zinc utilization were carried out on Wistar rats fed with semi-synthetic diets for 12 days varying only in the protein source, which was casein-methionine or tuna provided as follows: raw, cooked in brine, steamed, sterilized with or without soybean oil, canned and stored for one or three years. Body weight, food intake, faecal and urinary zinc excretion, and zinc content in rat liver were monitored. No modifications were shown in food efficiency when diets including tuna were used, compared with those values from the casein-methionine diet. Thus, final body weight results were similar in all groups tested. Dietary zinc absorption was enhanced by consuming a raw white tuna diet. This beneficial effect disappeared after steaming or cooking in brine, but it was slightly recovered after sterilization with oil and storage of the canned tuna. Animals fed on the diets including the oil-free canned tuna, showed two or three times higher faecal and urinary zinc excretion than those fed on casein and canned tuna stored for 0, 1 or 3 years, reaching a negative balance. A negative effect was therefore found in both dietary and endogenous zinc utilization due to the consumption of oil-free canned tuna.

Animals↗

[Use of a stimulated echo sequence in the MRI study of the brain and spine].

We describe in this paper how the STEAM sequence can be an efficient tool to obtain images free of flow artifacts in anatomical situation where the spin echo failed. The simplest way to eliminate flow artifacts is to exploit the dephasing induced by motion in magnetic field gradients and to reduce to zero the signal from moving tissues. This can be achieve by increasing the time elapsed between the spin excitation and the signal observed. Because of T2 relaxation, such an increase results in a signal decrease when the spin echo sequence is used. The STEAM sequence has the unique property that the time elapsed between observation and excitation can be increased without change in T2 value and so allows a good suppression of signals from the moving spins with short TE. Our results demonstrate that, although the stimulated echo intensity is only half that of a spin echo taken at the same read out time, the advantages of STEAM imaging can compensate for this partial loss in signal to noise in some particular clinical situations. The influence of mixing time on contrast has been evaluated using thoracic spine imaging and it has been shown that contrast between spine and CSF can be significantly improved (+ 60%) when TM is increased (from 17 ms to 50 ms). In the same time, the contrast between spine and fat issue decreases (40%). This last effect facilitates the adjustment of contrast window. Suppression of motion artifacts has first been evaluated with thoracic spine imaging, using a whole body coil. Suppression of artifacts was better than that obtained with a flow compensated spin echo sequence, especially in the case of kyphotic patients when a presaturation band was inefficient. In a second step suppression of motion artifacts has been evaluated from posterior fossa examination after injection of a paramagnetic contrast agent. The images obtained with the stimulated echo sequence show a dramatic reduction of signal from blood in the lateral sinus, and therefore an increase of quality by elimination of motion artifacts.

Adipose Tissue↗

Determination of trans fatty acids in cold pressed oils.

The adulteration of cold pressed oils (CPO) by refining or by blending with refined oils will lead to an increase of trans fatty acids (TFA) in such oils. The regulations of the European Community (EC) demand strict processing conditions without any steam treatment for cold pressed, native olive oils and provide limits for TFA. German regulations, however, allow a "steam washing" for CPO other than native olive oil and offer no limits for TFA. The TFA content of such oils could exceed the limits for cold pressed, native olive oil. Modern capillary GLC serves as a quick tool for the detection of TFA formed during deodorization and other processing. However, care should be taken to avoid the formation of TFA during analysis. We evaluated the content of TFA in several oils labelled as cold pressed and the formation of TFA during "steam washing". Analysis of some seeds indicates that preliminary drying of the seeds may also lead to TFA.

Chromatography, Gas↗

Proton MR spectroscopic characteristics of pediatric pilocytic astrocytomas.

PURPOSE: We report the common characteristics of juvenile pilocytic astrocytomas revealed by proton MR spectroscopy. METHODS: Eight children with pilocytic astrocytomas were studied with proton MR spectroscopy. The selected sampling volume was approximately 4 cm3, obtained from solid tumor. To localize the sampling volume, we used point-resolved spectroscopy (PRESS) and stimulated-echo acquisition mode (STEAM) techniques to acquire long- and short-TE spectra, respectively. Spectra from PRESS and STEAM sequences were processed using Lorentzian-to-Gaussian transformation and exponential apodization, respectively. For PRESS (2000/270) spectra, peaks of creatine, choline, N-acetylaspartate (NAA), and lactate resonances were integrated; for STEAM (2000/20) spectra, we measured the amplitude of the peaks at 3.2, 2.0, 1.3 and 0.9 ppm. RESULTS: An elevated lactate doublet was observed in the PRESS spectra. The choline/NAA ratio was 3.40. The amplitude ratios of the lipid pattern (0.9, 1.3 and 2.0 ppm) to choline were all below one. CONCLUSION: Despite the benign histology of the tumor, which generally lacks necrosis, a lactate signal was detected in all eight patients studied. A dominant lipid pattern was not observed.

Aspartic Acid↗

Heat injuries to the respiratory system.

A steam-tube of the main boiler exploded on a ship lying in the harbour of Hamburg. The steam temperature was 283 degrees C. Cutaneous and severe inhalational scalding occured in the 27 fatalities, the men dying after different intervals. This paper deals with the pathological findings in the respiratory passages and the lung, describing the topographical extent of direct thermal injury and the temporal course of tissue reactions. In cases of instantaneous death coagulation necrosis of the tracheal and bronchial wall was found to extend to alveolar ducts in central parts of the lung. The lung parenchyma showed marked congestion, alveolar edema and desquamation of alveolar epithelial cells. Death occured due to acute pulmonary dysfunction and shock. Lethal complications following the period of primary shock consisted of fulminant confluent bronchopneumonia, the hyaline membrane syndrome or the onset of desquamative interstitial pneumonia. These changes rendered it difficult to evaluate the effects of the heavy cutaneous scalding on the pathological course of inhalational injuries in those surviving for longer periods.

Adult↗

Methods of reprocessing complex medical equipment.

The choice as to which of the two gaseous processes is best suited to individual hospital needs is a difficult one. Very few items are unable to tolerate 73 degrees C (LTSF) and these few can withstand 37 degrees C or 55 degrees C (EO). Unfortunately, LTSF is a 'moist' process and sterilizers have a poor history of providing sterilization without modification, and consequently few are used. Ethylene oxide is more reliable, but environmental hazards are greater and running costs high. Both processes are time-consuming and the use of sporicidal disinfectants such as glutaraldehyde is often the only practical alternative. Before purchasing any gaseous sterilizer it is essential to consider throughput and the availability of alternative processes. It may prove sensible to share facilities or at least offer a regional facility. It is certainly not worthwhile purchasing expensive gas sterilizers for reprocessing inexpensive single-use items or for those that require disinfection only. Low temperature steam is safe, inexpensive and no special environmental provisions are necessary. It is, however, not a sterilization process. Disinfectants, hot water and steam will continue to be the only suitable methods for reprocessing items outside the hospital sterile supply department or disinfection unit. Concern over the decontamination of blood-stained instruments following use on patients with hepatitis B or HIV has led to an upsurge of interest in boilers and inexpensive bench top ovens and autoclaves. Such processes are likely to prove more effective than disinfectants but should heat treatment prove impractical then 2% glutaraldehyde or 70% alcohol may be used.(ABSTRACT TRUNCATED AT 250 WORDS)

Cross Infection↗

Sterilisation of implantable devices.

The pathogenesis and rates of infection associated with the use of a wide variety of implantable devices are described. The multi-factorial nature of post-operative periprosthetic infection is outlined and the role of sterilisation of devices is explained. The resistance of bacterial spores is highlighted as a problem and a full description is given of the processes of sterilisation by heat, steam, ethylene oxide, low temperature steam and formaldehyde, ionising radiation and liquid glutaraldehyde. Sterility assurance and validation are discussed in the context of biological indicators and physical/chemical indicators. Adverse effects upon the material composition of devices and problems of process control are listed. Finally, possible optimisations of the ethylene oxide process and their potential significance to the field of sterilisation of implants is explored.

Biocompatible Materials↗

Injuries to plants from controlled environment contaminants.

The use of controlled environments is subject to problems from contaminants emitted from materials of the system and from plants. Many contaminants are difficult to identify because injurious dosages are very low, there is a lack of information on what compounds injure plants, because species and cultivars differ greatly in their sensitivity to injury and injury symptoms often are not distinctive. Plastics have been shown to emit many different volatile compounds. The compound, di-butyl phthalate, contained in certain flexible plastics, has been shown to be very toxic to plants. Other injuries have been produced by caulking compounds and bonded screening. Paints have been shown to release xylene that is toxic to plants. Steam for humidification can cause problems because of hydroxylamines and other compounds added to steam used for heating to control fungal growth in return lines. Mercury, from broken thermometers is a particular problem in growth chambers because small quantities can collect in cracks and slowly volatilize to slow growth of plants. Plants themselves release large quantities of volatile hydrocarbons, with ethylene being the commonly recognized chemical that can be damaging when allowed to accumulate. People release large quantities of carbon dioxide which can cause variations in the rate of growth of plants. Contaminant problems can be controlled through filtering of the air or ventilation with make-up air, however the potential for problems is always present and careful testing should be undertaken with the particular species and cultivars being grown insure that there are no toxic agents altering growth in each particular controlled environment being utilized.

Air Conditioning↗

The sterilization of endodontic hand files.

Several different methods of file sterilization were analyzed to determine the best method of providing complete file sterility, including the metal shaft and plastic handle. Six test groups of 15 files were studied using Bacillus stearothermophilus as the test organism. Groups were "sterilized" by glutaraldehyde immersion, steam autoclaving, and various techniques of salt sterilization. Only proper steam autoclaving reliably produced completely sterile instruments. Salt sterilization and glutaraldehyde solutions may not be adequate sterilization methods for endodontic hand files and should not be relied on to provide completely sterile instruments.

Colony Count, Microbial↗

Effects of multiple sterilization on surface characteristics and in vitro biologic responses to titanium.

PURPOSE: This study evaluates the surface changes and effects on in vitro cell attachment and spreading brought about on prepared commercially pure titanium by multiple exposures to common sterilization methods. MATERIALS AND METHODS: Discs of commercially pure titanium were prepared to approximate the surface roughness of commercially available bone miniplates. Samples underwent sterilization by exposure to ultraviolet light; ethylene oxide sterilization (1, 5, or 10 cycles); or by steam autoclaving (1, 5, or 10 cycles). Representative surfaces from these sterilization groups were examined using a series of surface analytical techniques including scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), auger electron spectroscopy (AES), and contact angle measurements. Cell attachment assays using murine fibroblasts were then performed on titanium surfaces from each sterilization group and on tissue culture plastic controls. Sterilized surfaces contained O, C, and N contaminants, which affected surface energetics. Mean percent cell attachment values for each group were obtained for periods of up to 1 hour. Representative samples from each group were examined using SEM to ascertain cell spreading and morphology for each sterilization group. RESULTS: Ultraviolet (UV) sterilized surfaces showed no changes from the unsterilized state macroscopically or under SEM. UV surfaces showed cell attachment levels similar to control surfaces at all intervals, and a chronologic progression of cell spreading. Ethylene oxide-sterilized surfaces showed occasional bluish discoloration and a microscopic particulate contaminant, resulting in modest decreases in cell attachment levels without strong correlation to numbers of sterilization cycles. Autoclaved surfaces generally showed the greatest discoloration and heaviest particulate contamination. Cell attachment levels were lower, and cell spreading was diminished compared with the ethylene-oxide-treated group. CONCLUSIONS: Both ethylene oxide and steam autoclave sterilization contaminated and altered the titanium surface, resulting in decreased levels of cell attachment and spreading in vitro. Although corroborative in vivo experiments should be conducted, the results of this study indicate that some multiple sterilization regimens for metallic materials may pose serious biologic concerns.

3T3 Cells↗

The effectiveness of two sterilization methods when different precleaning techniques are employed.

The effectiveness was investigated of methods for the preparation of dental handpieces prior to sterilization procedures utilizing ethylene oxide (ETO) gas. The handpieces were cleaned using either a forced-air purging unit (group 1) or by flushing with air and water from the dental unit (group 2). They were inoculated with either Bacillus subtilis or Streptococcus mutans. After exposure to either steam or ETO gas, the handpieces were flushed with saline and the viability of recovered bacteria assessed. No viable bacteria were recovered from group 1 handpieces treated with either ETO gas or steam. However, viable S. mutans were recovered from group 2 handpieces following exposure to ETO gas. Thus, the use of a high-pressure forced-air purging unit may be required for the reliable sterilization of dental handpieces by ETO gas, as viable S. mutans could be recovered from untreated handpieces exposed to ETO gas.

Air Pressure↗

Effect of oxygen delignification on the rate and extent of enzymatic hydrolysis of lignocellulosic material.

In this study, we examined the effect of oxygen delignification on the rate and extent of enzymatic hydrolysis (using commercial cellulase and beta-glucosidase) of a number of lignocellulosic substrates, including kraft pulp (model substrate), pulp mill primary clarifier sludge (PCS) and steam-exploded Douglas fir chips. Oxygen delignification removed up to 67% of the lignin from softwood pulp and improved the rate of, and yield from, hydrolysis by up to 111% and 174%, respectively. Glucose yield varied linearly with fractional lignin removal. Oxygen delignification of primary clarifier sludge improved hydrolysis yield by up to 90%. However steam-exploded Douglas fir was very resistant to hydrolysis at low enzyme loading, and oxygen delignification decreased hydrolysis rate and yield.

Atmospheric Pressure↗

Super blue box recycling (SUBBOR) enhanced two-stage anaerobic digestion process for recycling municipal solid waste: laboratory pilot studies.

The super blue box recycling (SUBBOR) process is an enhanced, multi-stage anaerobic digestion process for mixed municipal solid waste (MSW) and other biomass feedstock materials. The technology centers on enhanced high solids, thermophilic digestion after steam-pressure disruption of the ligno-cellulosic fiber components that are recalcitrant to conventional anaerobic digestion. Mixed MSW, rich in organic components but also containing inorganic materials, such as glass, aluminum and steel, as well as non-digestible plastic materials, has been laboratory pilot tested with a fully integrated process train designed to treat and recycle all of the MSW components. Methane yields from the MSW were 0.36 m3 CH4/kg volatile solids (VS) representing a 40% increase over the yield obtained from conventional single stage digestion. The secondary digestion step after steam pressure disruption also provided a 40% improvement in total solids and VS reduction. The residual organic fraction following two-stage digestion was fine in texture and was recovered as a clean peat fraction with reduced contents of heavy metal and other fugitive non-digested contaminants. Mass and energy balance determinations indicated a high degree of MSW diversion from landfill disposal (>80%) was achievable by the SUBBOR process as well as substantial net electrical and thermal energy production. Continuous long-term trials of the SUBBOR process at 25,000 tonnes/year are underway.

Anaerobiosis↗

Comparison of extraction methods for marker compounds in the essential oil of lemon grass by GC.

A gas chromatography flame ionization detection method for the quantification of bioactive marker compounds (neral, geranial, geraniol, limonene, citronellal, and beta-myrcene) in the essential oil of Cymbopogon citratus (lemon grass) was developed. Four procedures for the extraction of essential oils from C. citratus were compared including solvent extraction, steam distillation extraction, accelerated solvent extraction, and supercritical fluid extraction. Solvent extraction by sonication with nonpolar solvents showed comparable results to the steam distillation method. Several commercial products prepared from C. citratus and Cymbopogon flexuosus were analyzed and compared.

Acyclic Monoterpenes↗

Essential oil composition of sachalinmint from Norway detected by solid-phase microextraction and gas chromatography-mass spectrometry analysis.

The essential oil of leaves and flowers of sachalinmint [Mentha sachalinensis (Briq.) Kudô] grown in Norway (Trondheim) has been studied by headspace solid-phase microextraction (HS-SPME) coupled with gas chromatography-mass spectrometry analysis (GC-MS). The essential oil content increased linearly in acropetal direction from 1.08% (0-20 cm plant height) to 1.75% (60-80 cm; young leaves and flowers). The steam-distilled samples showed a minor complex matrix with a very high menthol and a much lower menthone content (87.89 and 4.05%, respectively). From testing of HS-SPME unequilibrated exposure times ranging from 10 s to 5 min, an extraction time of 30 s was found to be sufficient to detect both low- and high-eluting compounds. Comparison of HS-SPME and steam-distilled samples established that the same tendencies of increasing menthol/menthone content in the basipetal/acropetal direction could be detected by both analysis methods. With regard to the extraction efficiency, HS-SPME gave additional detailed information about less important terpenic compounds.

Gas Chromatography-Mass Spectrometry↗

Production in large quantities of highly purified hydroxytyrosol from liquid-solid waste of two-phase olive oil processing or "Alperujo".

The effect of hydrothermal treatment of two-phase olive waste (alperujo) on the solubilization of hydroxytyrosol was studied. Different conditions of saturated steam were assayed. A high amount of hydroxytyrosol was solubilized and increased with increasing steaming temperature and time, reaching 1.4-1.7 g/100 g of dry alperujo. The effect of acidic (H(2)SO(4)) and basic (NaOH) catalysts was also evaluated. Acid-catalyzed treatment was more effective at milder conditions, whereas the alkali-catalyzed conditions were not very suitable. In the present study, the extracted hydroxytyrosol was purified by means of a new, simple, and inexpensive chromatographic system, under international patent application (PCT/ES02/00058). From 1000 kg of alperujo, with 70% humidity, can be obtained approximately 4.5-5 kg of hydroxytyrosol. After a purification process, at least 3 kg of hydroxytyrosol, at 90-95% purity, would be obtained. The purified compound was identified by HPLC/UV and (1)H and (13)C NMR analyses, and its antioxidant activity was tested on refined olive oil without antioxidants by Rancimat method. The oxidative stability of refined olive oil was increased by a factor of 1.71 in the presence of 100 ppm of hydroxytyrosol.

Chromatography, High Pressure Liquid↗

Thermal damage of the inner vein wall during endovenous laser treatment: key role of energy absorption by intravascular blood.

BACKGROUND: Despite the clinical efficacy of endovenous laser treatment (EVLT), its mode of action is incompletely understood. OBJECTIVE: To evaluate the role of intravascular blood for the effective transfer of thermal damage to the vein wall through absorption of laser energy. METHODS: Laser energy (15 J/pulse, 940 nm) was endovenously administered to explanted greater saphenous vein (GSV) segments filled with blood (n = 5) or normal saline (n = 5) in addition to GSVs under in vivo conditions immediately prior to stripping. Histopathology was performed on serial sections to examine specific patterns of damage. Furthermore, in vitro generation of steam bubbles by different diode lasers (810, 940, and 980 nm) was examined in saline, plasma, and hemolytic blood. RESULTS: In saline-filled veins, EVLT-induced vessel wall injury was confined to the site of direct laser impact. In contrast, blood-filled veins exhibited thermal damage in more remote areas including the vein wall opposite to the laser impact. Steam bubbles were generated in hemolytic blood by all three lasers, while no bubbles could be produced in normal saline or plasma. CONCLUSION: Intravascular blood plays a key role for homogeneously distributed thermal damage of the inner vein wall during EVLT.

Humans↗

[Stability of human bone cortex following various preservation and sterilization methods].

In a biomechanical study we evaluated the stability of human femurs. In order to document the inter- and intraindividual differences in bending stability, and the changes in breaking strength after different storing and sterilizing procedures, we tested 200 bony blocks, which were harvested from the femurs of 5 multiorgan donors. The bending tests were performed with a material testing machine (ZWICK) under standardized conditions. The bone blocks we randomized into five different treatment groups (-25 degrees C deep freezing, steam sterilization, lyophilization, lyophilization + gamma irradiation, lyophilization + gamma-irradiation in argon). The statistical analysis was performed by a multivariant analysis. Our results revealed significant differences concerning breaking strength among different femurs of the 5 multiorgan donors, and a significant difference concerning stability in different areas of the same femur. Further on we found a significant difference with regard to the treatment modalities of the five groups. Compared to the control group (-25 degrees C deep freezing), we documented a decrease of 8.7% after steam sterilization, an increase of 18.9% after lyophilization, a decrease of 1.7% after lyophilization + gamma-irradiation, and an increase of 3.4% after lyophilization + gamma-irradiation in argon.

Adult↗