Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Formaldehyde”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70Linked to original sources
PubMed1987

The formaldehyde-fixed and paraffin-embedded tissues for diagnostic transmission electron microscopy: a retrospective and prospective study.

The fine structures of tissues processed routinely for light microscopy were studied retrospectively in 44 tissues and tumors and prospectively in 13 tissues and tumors. In the prospective study, we fixed tissues in an ample amount of fixatives, carefully avoiding crushed and air-dried portions, and processed them by five methods. The fine structures of the retrospective cases were mostly poor or passable, whereas those of the prospective cases were generally good. All formaldehyde-fixed tissues showed varied degrees of tissue extraction, notably of lipids, membranous structures, ribosomes, glycogen, and other loose cellular and intercellular matrix materials, that was related to the status and type of tissue as well as the kind and duration of fixation, dehydration, and tissue clearance. Paraffin embedding per se appeared to cause little alteration of the fine structure. Transmission electron microscopy of the paraffin-embedded tissue appeared most useful to identify infective agents, foreign particles, and densely packed organelles or structures, usually in the differential diagnosis of neoplasms. Although many factors are difficult to control, initial careful thin slicing, judicious selection, and fixation of the tissue (even by regular phosphate-buffered formaldehyde solution) can improve the fine structure of paraffin-embedded tissues and be useful in the direct correlation of light and electron microscopic findings.

Bone Marrow Diseases↗
PubMed1987

Plasmid-mediated formaldehyde resistance in Serratia marcescens and Escherichia coli: alterations in the cell surface.

The plasmid-mediated formaldehyde resistance of Serratia marcescens and Escherichia coli was examined. For that purpose the outer membranes of isogenic strains (with and without resistance plasmid) were compared. No quantitative or immunological differences in lipopolysaccharide of resistant and sensitive strains were noted. By contrast analysis of outer membrane proteins revealed that the sensitive variants had a higher protein content than the resistant strains. When outer membrane proteins were separated by SDS-PAGE the number of bands seemed identical for sensitive and resistant strains but the intensity of some of the bands was greater for the sensitive isolates. In addition, the surface hydrophobicity was greater for the resistance than for the sensitive strains. These findings suggest that the formaldehyde resistance plasmid of Serratia marcescens confer changes in cell surface proteins and surface hydrophobicity.

Bacterial Outer Membrane Proteins↗
PubMed1989

Reanalysis of lung cancer mortality in a National Cancer Institute Study on "Mortality among industrial workers exposed to formaldehyde".

The analysis of an historical cohort study of mortality among individuals occupationally exposed to formaldehyde by Blair et al. (2) in 1986 failed to allow properly for the Healthy Worker Effect and to evaluate time integrated exposure and length of exposure simultaneously. In our reanalysis of the same data we find a risk for lung cancer, increasing with increasing cumulative exposure to formaldehyde.

Adult↗
PubMed1989

Building related illness involving formaldehyde and other volatile organic compounds.

A large percentage of the occupants in a 96,000 ft2 office building were suffering multiple adverse health symptoms continuing and/or reoccurring for over 4 years. The symptoms were believed to be the result of building related illness. Detailed indoor air quality and product emission studies realed the presence of formaldehyde and volatile organic compounds contamination primarily resulting from furniture constructed of pressed wood products (formaldehyde source) and a chemical deodorizer (volatile organic compound source).

Deodorants↗
PubMed1995

Very low temperature formaldehyde reactions and the build-up of organic molecules in comets and interstellar ices.

We have investigated thermally promoted reactions of formaldehyde (H2CO) in very low temperature ices. No such reactions occurred in ices of pure formaldehyde. However, addition of trace amounts of ammonia (NH3) were sufficient to catalyze reactions at temperatures as low as 40 K. Similar reactions could take place in interstellar ices and in Comets and produce considerable amounts of organic molecules.

Ammonia↗
PubMed2001

Isolation of a 2:1 hydrochlorothiazide-formaldehyde adduct impurity in hydrochlorothiazide drug substance by preparative chromatography and characterization by electrospray ionization LC-MS.

Hydrochlorothiazide drug substance (19 lots) from five different manufacturers and four different countries of origin (USA, Italy, Hungary, and Croatia) were analyzed for the presence of impurities using a gradient elution chromatographic system, with acetonitrile-water as the mobile phase. Two known impurities of hydrochlorothiazide, 4-amino-6-chloro-1,3-benzenedisulfonamide and chlorothiazide, were separated, as well as a late-eluting, unknown, recurring impurity. The unknown impurity was isolated by preparative liquid chromatography followed by preparative thin-layer chromatography. It was characterized by electrospray ionization LC-MS as a 2:1 hydrochlorothiazide-formaldehyde adduct of the parent drug substance. The adduct is believed to form through the double condensation reaction of hydrochlorothiazide with excess formaldehyde during the parent compound's synthesis. The concentration of this impurity ranged from 0.02 to 1.1% (area%), and was above the 0.1% USP Other Impurities threshold in 16 of the 19 lots examined.

Antihypertensive Agents↗
PubMed1997

Quantitation of taurolidine decomposition in polymer solutions by chromotropic acid formaldehyde assay method.

A sensitive, selective, and specific assay was needed to study the degradation kinetics of taurolidine and its stabilization by polyvinylpyrrolidone (PVP). The purpose of the present study was to evaluate the usefulness of the chromotropic acid method and other formaldehyde or amine derivatization methods. The methods evaluated included formaldehyde derivatization with chromotropic acid, acetylacetone, 4-amino-5-hydrazino-3-mercapto-1,2,4-triazole, semicarbazide hydrochloride, or 2,4-dinitrophenylhydrazine and taurolidine decomposition product derivatization with dansylchloride or 7-chloro-4-nitrobenz-2-oxa-1,3-diazole chloride. Results indicated that the chromotropic acid method provided sufficient selectivity, reproducibility and sensitivity. It was able to quench taurultam decomposition and avoided PVP interference. The method was optimized by performance based selection of reagent lots, appropriate reagent storage and preparation, and controlled derivatization conditions. In conclusion, the optimized chromotropic method was the most appropriate method for quantitating taurolidine decomposition.

Anti-Infective Agents↗
PubMed2002

Formaldehyde cytotoxicity in three human cell types assessed in three different assays.

International standards for preclinical screening of the cytotoxicity of dental materials so far recommend the use of established cell lines. The aim of this study was to assess the relative susceptibility of human dental pulp fibroblasts (HPF), human buccal epithelial cells (HBE) and HeLa cervix cancer cells exposed to identical cytotoxic challenges. Formaldehyde, which may be released from dental materials such as dental composites, glassionomer cements, and endodontic sealers, was used as test chemical. Cytotoxicity data including dose-response relations and TC(50) values were assessed in three different assays: BrdU incorporation, neutral red uptake and MTT assays. HBE and HPF demonstrated statistically significant lower TC(50) values in both the neutral red and the BrdU assay in comparison to HeLa cells. In the MTT assay no statistically significant differences were observed between the cell types. In the two target-tissue cell types (HPF and HBE) the Neutral Red assay revealed lower TC(50) values in comparison to the BrdU assay. In HeLa cells no statistically significant differences were observed between the assays. In conclusion, the present study confirms that cytotoxicity data obtained by cell culture studies are influenced by both cell culture model and choice of assay. Under identical experimental conditions, human target tissue cells appeared to be more sensitive to formaldehyde toxicity than human HeLa cancer cells.

Bromodeoxyuridine↗
PubMed2003

Kinetics of degradation of 4-imidazolidinone prodrug types obtained from reacting prilocaine with formaldehyde and acetaldehyde.

The kinetics of decomposition of 4-imidazolidinone prodrug types obtained by reacting prilocaine (I) with formaldehyde and acetaldehyde has been studied in aqueous solution in the pH range 1-7.4 at 60 and 37 degrees C, respectively. At pH<5 the hydrolysis of the derivative derived from formaldehyde (II) to yield I obeyed apparent first-order kinetics. At higher pH, the decomposition reactions proceeded to an equilibrium and the reactions could be described by first- and second-order reversible kinetics. A plot of the logarithm of the apparent first-order rate constants for hydrolysis of II against pH resulted in a sigmoidal-shaped pH-rate profile characteristic for the hydrolysis of many N-Mannich bases. A half-life at pH 7.4 (60 degrees C) of 6.9h for compound II was calculated. Compared to II the 4-imidazolidinone derived from acetaldehyde (III) exhibited enhanced instability in aqueous buffer solutions. The decomposition was followed at 37 degrees C monitoring the decrease in concentration of intact (III). At acidic pH the reactions displayed strict first-order kinetics and the disappearance of III was accompanied by a concomitant formation of I. At pH 7.4, the rate data also applied reasonably well to first-order kinetics despite the observation that small amounts of III was formed at pH 7.4 from a solution containing equimolar concentrations of acetaldehyde and prilocaine (10(-4)M). In case of III, a bell-shaped pH-rate profile was obtained by plotting the logarithm of the pseudo-first-order rate constants against pH indicating the involvement of a kinetically significant intermediate in the reaction pathway and a change of the rate-limiting step in the overall reaction with pH. For the stability studies performed at pH 6.9 and 7.4 product analysis revealed that parallel to formation of (I) an unknown compound (X) emerged. Compared to III, compound X is hydrolysed to give I at a slower rate (t(50%)=30 h at 37 degrees C). Based on LC-MS data it is suggested that (X) is an isomeric form of III, which may exist in four diastereomeric forms. Thus, at physiological pH an initial relatively fast regeneration of I from III is to be expected followed by a slower drug activation resulting from hydrolysis of the isomeric form of III.

Acetaldehyde↗
PubMed2002

Testicular zinc, copper and iron concentrations in male rats exposed to subacute and subchronic formaldehyde gas inhalation.

The level of trace elements such as Zn, Cu and Fe in testicular tissue is an indication of the condition of the tissue as these elements take over important tasks. Zinc and copper are the prosthetic groups of several metalloenzymes including superoxide dismutase (SOD) which is an important antioxidant enzyme in the cellular protection from reactive oxygen species. If concentrations of these trace elements decrease significantly, SOD cannot detoxify harmful oxygen species. In this study, adult male rats (wistar-albino) were exposed to formaldehyde at different periods (subacute and subchronic) and concentrations (0; 12.2; 24.4 mg.L-1). Body and testis weights were recorded and compared with control groups. The metals described above were determined in rat testicular tissue by atomic absorption spectrometry by using wet ashing. We conclude that subacute or subchronic exposure to formaldehyde have caused growth retardation and altered levels of trace elements, including copper, zinc and iron, in testicular tissue, and may induce further oxidative damage on testicular tissue leading to spermatozoal abnormalities.

Animals↗
PubMed2001

Formaldehyde-mediated modification of natural deoxyguanosine with amines: one-pot cyclization as a molecular model for genotoxicity.

Stable cross-linked adducts, 3-(2-deoxy-beta-D-ribofuranosyl)-7-phenyl-5,6,7,8-tetrahydro[1,3,5]triazino[1,2-a]purin-10(3H)-one and 7-butyl-3-(2-deoxy-beta-D-ribofuranosyl)-5,6,7,8-tetrahydro[1,3,5]triazino[1,2-a]purin-10(3H)-one, that formed chemically from natural deoxyguanosine and aniline or buthyl amine in the presence of formaldehyde were identified. This reaction appears to be a general reaction of deoxyguanosine and primary amines, and it may be a model of DNA modification with carcinogenic aromatic amines without metabolic activation, if formaldehyde is present.

Amines↗
PubMed2000

Antigen retrieval on formaldehyde-fixed paraffin sections: its potential drawbacks and optimization for double immunostaining.

It is well known that the major artifact induced by formaldehyde fixation is the masking of tissue antigens due to cross-linking of protein amino acid residues. Recently many antigen retrieval techniques have been devised to unmask the hidden antigen epitopes and recover immunoreactivity. In this study, some practical problems of two common unmasking techniques, i.e. heat-induced epitope retrieval and enzyme digestion have been reviewed in immunostaining of proliferating cell nuclear antigen (PCNA) on formaldehyde-fixed paraffin-embedded sections. As the heating conditions became more severe, false-positive staining and/or nonspecific background staining occurred. Based on the principle of protein inactivation/denaturation and the possible mechanisms of antigen retrieval, it has been suggested that the antigen retrieval itself can also denature proteins in tissues, just as many other protein inactivation processes. Thus, the total magnitude of protein conformational change caused by the overall unmasking procedure is in practice crucial. To prove this hypothesis and to overcome such undesirable drawbacks after antigen retrieval, a new combination technique of a mild heating condition (microwaved at 80 degrees C for 15-20min) and pepsin digestion was devised. This technique led to a strong specific immunoreactivity of PCNA, without any undesirable false positive or background staining. The procedure was also adapted for double immunostaining of PCNA together with alpha-actin, bromodeoxyuridine, keratin, type IV collagen and vimentin.

Actins↗
PubMed1992

Detoxification of diphtheria and tetanus toxin with formaldehyde. Detection of protein conjugates.

In a model system of purified diphtheria and tetanus toxins it was shown that conjugates between the two proteins are formed during detoxification with formaldehyde. Detoxification mixtures were fractionated by HPLC. Two protein conjugates with different molecular weights were detected and quantified by capture ELISA assay. In vivo the existence of the largest diphtheria-tetanus toxoid conjugate was demonstrated by its antibody response in mice vaccinated with a calcium phosphate adjuvated column fraction of detoxification mixture. To eliminate the risk of cross-linking foreign proteins to toxoids in an attempt to reduce the frequency of adverse reactions in vaccination programmes, it is preferable to purify toxins before treatment with formaldehyde.

Animals↗
PubMed2004

Absorption of formaldehyde (H2CO) in the A1A2 <-- X1A1 band system at elevated temperatures and pressures.

The electronic A1A2 <-- X1A1 absorption spectra of formaldehyde vapour were studied at temperatures varying from 423 to 770 K with variable pressures from less than 0.1 to 1 MPa. Broadband vibronic and partially rotationally resolved 4(0)(1) rovibronic spectra of formaldehyde showed considerable sensitivity to temperature. The high resolution spectra showed collision-induced broadening as the pressure was increased. The results show that the absorption efficiency of the laser radiation from the third harmonic of Nd:YAG lasers is sensitive to the spectral properties of the laser, such as line position and shape. Promising results were obtained from the comparison between theoretical and measured absorption spectra.

Absorption↗
PubMedDate not supplied

Preparation and characterization of urea-formaldehyde-pepsin bioconjugate: a new biocatalyst system.

This study describes the synthesis of urea formaldehyde (UF) microspheres by a dispersion polycondensation polymerization method. These microspheres with proper F/U molar ratio can provide highly reactive groups, capable of further condensation with the amino acid residues of enzyme/proteins. Presence of methylols groups in UF microspheres was confirmed by 13C NMR study. Pepsin, a proteolytic enzyme, was immobilized on the UF microspheres to form bioconjugate system. As compared to the free enzyme in solution, the pepsin in the bioconjugate system exhibited significantly enhanced pH and temperature stability. The urea-formaldehyde-pepsin bioconjugate system also exhibited excellent proteolytic activity over eight successive reuse cycles with more than 50% of initial activity. A highlight of this new biocatalyst is the ease with which separation of this biocatalyst from the reaction medium may be achieved by mild centrifugation.

Adsorption↗
PubMed2005

Summertime ambient formaldehyde in five U.S. metropolitan areas: Nashville, Atlanta, Houston, Philadelphia, and Tampa.

First, we briefly review the atmospheric chemistry and previous intercomparison measurements for HCHO, with special reference to the diffusion scrubber Hantzsch reaction based fluorescence instrument used in the field studies reported herein. Then we discuss summertime HCHO levels in five major U.S. cities measured over 1999-2002, primarily from ground-based measurements. Land-sea breeze circulations play a major role in observed concentrations in coastal cities. Very high HCHO peak mixing ratios were observed in Houston (>47 ppb) where the overall median mixing ratio was 3.3 ppb; the corresponding values in Atlanta were approximately >18 and 7.9 ppb, respectively. The peak and median mixing ratios (9.3 and 2.3 ppb) were the lowest for Tampa, where the land-sea breeze also played an important role. In several cities, replicate HCHO measurements were made by direct spectroscopic instruments; the instruments were located kilometers from each other and addressed very different heights (e.g., 106 vs 10 m). Even under these conditions, there was remarkable qualitative and often quantitative agreement between the different instruments, when they were all sampling the same air mass within a short period of each other. Local chemistry dominates how HCHO is formed and dissipated. The high concentrations in Houston resulted from emissions near the ship channel; the same formaldehyde plume was measured at two sites and clearly ranged over tens of kilometers. Local micrometeorology is another factor. HCHO patterns measured at a high-rise site in downtown Nashville were very much in synchrony with other ground sites 12 km away until July 4 celebrations whence HCHO concentrations at the downtown site remained elevated for several days and nights. The formation and dissipation of HCHO in the different cities are discussed in terms of other concurrently measured species and meteorological vectors. The vertical profiles of HCHO in and around Tampa under several different atmospheric conditions are presented. The extensive data set represented in this paper underscores that urban HCHO measurements can now be made easily; the agreement between disparate instruments (that are independently calibrated or rely on the absolute absorption cross section) further indicates that such measurements can be done reliably and accurately for this very important atmospheric species. The data set presented here can be used as a benchmark for future measurements if the use of formaldehyde precursors such as methanol or methyl tert-butyl ether (MTBE) as oxygenated fuel additives increases in the future.

Air Pollutants↗
PubMed2000

13C and (2)H kinetic isotope effects and the mechanism of Lewis acid-catalyzed ene reactions of formaldehyde.

13C and (2)H kinetic isotope effects were determined for the ene reaction of formaldehyde with 2-methyl-2-butene at natural abundance catalyzed by diethylaluminum chloride. The reactive methyl group exhibits a k(12)(C)/k(13)(C) of 1.006-1.009 and a k(H)/k(D) of approximately 1.22-1.23. The latter represents a combination of primary and secondary effects and is consistent with a significant primary deuterium isotope effect. A very close correspondence of the other isotope effects with the equilibrium isotope effects predicted for formation of a model intermediate cation is observed. An intermolecular deuterium isotope effect of 2.0-2.5 was observed under several reaction conditions in the Lewis acid-catalyzed reaction of formaldehyde with d(0)/d(12)-tetramethylethylene. The results are interpreted as supporting the reversible formation of an essentially classical open cation followed by rate-limiting proton transfer.

Acids↗
PubMed2005

Comparative study on pore structures of mesoporous ZSM-5 from resorcinol-formaldehyde aerogel and carbon aerogel templating.

Resorcinol-formaldehyde aerogels and carbon aerogels of different mesoporosities have been used as templates for preparing bimodal zeolites of mesopores. Samples were thoroughly characterized with X-ray diffraction, field emission scanning electron microscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy, N(2) adsorption at 77 K, as well as FT-IR spectroscopy and (29)Si nuclear magnetic resonance spectroscopy. The mesoporous ZSM-5 zeolites have additional mesopores of 9-25 nm in widths and 0.07-0.2 cm(3)/g in volumes, besides their perfect inherent micropores. Experimental results show the mesoporous systems of the finally obtained zeolites can be influenced by proper preparation of resorcinol-formaldehyde aerogels and carbon aerogels through solution chemistry. Consequently, zeolites of tunable mesoporosities can be prepared with this unique methodology.

Carbon↗