SEARCH · Search PubMed

Results for “WOOD”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources

PubMed2005

Preservative leaching from weathered CCA-treated wood.

Disposal of discarded chromated copper arsenate (CCA)-treated wood in landfills raises concerns with respect to leaching of preservative compounds. When unweathered CCA-treated wood is leached using the toxicity characteristic leaching procedure (TCLP), arsenic concentrations exceed the toxicity characteristic (TC) limit of 5mg/L in most cases. The majority of discarded CCA-treated wood, however, results from demolition activities, where the wood has typically been subjected to weathering. Since preservatives do migrate from the wood during its normal use, leaching characteristics of weathered and aged CCA-treated wood may differ from unweathered wood. To evaluate this, CCA-treated wood removed from service after various degrees of weathering was collected from multiple sources and leached with the TCLP, the synthetic precipitation leaching procedure (SPLP) and California's waste extraction test (WET). Five to seven individual pieces of wood were analyzed from each source. The average TCLP arsenic concentration for the 14 sources ranged from 3.2 to 13 mg/L. The average TCLP concentrations of the 100 wood pieces tested were 6.4, 5.9 and 3.2 mg/L for arsenic, copper and chromium, respectively. Overall, in 60 out of 100 samples tested by the TCLP, arsenic concentrations exceeded 5 mg/L (the TC regulatory value). SPLP leachate concentrations were similar to TCLP concentrations, although copper leached somewhat more with the TCLP. WET leachate concentrations were approximately a factor of 10 higher than TCLP concentrations. Discarded CCA-treated wood, even after exposure to years of weathering, often exceeds the TC limit for arsenic and without the current regulatory exemption would possibly require management as a TC hazardous waste in the US.

Arsenates↗

PubMed1999

A rapid and simple method for processing wood to crude cellulose for analysis of stable carbon isotopes in tree rings.

For analysis of carbon isotope discrimination in wood, cellulose or holocellulose is often preferred to whole tissue because of the variability in isotopic composition of different wood components and the relative immobility of cellulose. Most currently used methods for the preparation of wood components for stable isotope analysis (e.g., the Jayme-Wise method) produce a residue of holocellulose. The Jayme-Wise method was initially developed to extract holocellulose from small (~1 g) samples of wood, and, despite subsequent modifications, the method requires specialized glassware, considerable time and entails the risk of sample loss. For carbon isotope analysis, we adapted an acid-catalyzed solvolytic method for preparing crude cellulose by treating wood meal with acidified di-glycol methyl ether (diglyme). The one-step process requires no special glassware, is complete within 24 hours and enables over 100 samples to be processed in a day. This method gives similar delta(13)C values to the Jayme-Wise method for wood of Eucalyptus globulus Labill., Pinus radiata D. Don and Pinus pinaster Ait. The relationship between delta(13)C of wood and crude cellulose is as strong as that observed between wood and alpha-cellulose and stronger than that observed between wood and holocellulose in other species. These relationships suggest that variation in delta(13)C of wood may result from hemicellulose and that analysis of stable carbon isotopes in crude cellulose is preferable. If the consistent -0.3 bias in the value of delta(13)C of cellulose resulting from residual lignin is corrected for, then the relationship between delta(13)C of wood and crude cellulose may be used to predict delta(13)C of cellulose from a small sub-sample. The method is well suited to species with low concentrations of extractives, but further testing is needed to assess its general applicability.

Journal Article↗

PubMed1989

Structure and function of flexure wood in Abies fraseri.

Wood produced during flexure in one-year-old leaders of Abies fraseri (Pursh) Poir. (Fraser fir) was analyzed anatomically and radio-densitometrically. More xylem cells were produced in stems subjected to flexing than in stems that were not flexed. The lumens of tracheids produced in response to flexure were smaller than the lumens of tracheids in normal wood. This was manifest as an increase in the cell wall area/cell lumen area ratio. Microfibril orientation in flexure-induced wood approached the less extreme values found in compression wood. The growth ring composed of flexure-induced wood also had a greater density than normal wood. Compression wood, as defined by cellular characteristics observed in transverse section, was absent in flexed stems. Detailed analysis of the anatomical structure, wood density and biomechanical properties of flexure-induced wood indicated that it has more in common with compression wood than with normal wood.

Journal Article↗

PubMed2000

Detection and identification of decay fungi in spruce wood by restriction fragment length polymorphism analysis of amplified genes encoding rRNA.

We have developed a DNA-based assay to reliably detect brown rot and white rot fungi in wood at different stages of decay. DNA, isolated by a series of CTAB (cetyltrimethylammonium bromide) and organic extractions, was amplified by the PCR using published universal primers and basidiomycete-specific primers derived from ribosomal DNA sequences. We surveyed 14 species of wood-decaying basidiomycetes (brown-rot and white-rot fungi), as well as 25 species of wood-inhabiting ascomycetes (pathogens, endophytes, and saprophytes). DNA was isolated from pure cultures of these fungi and also from spruce wood blocks colonized by individual isolates of wood decay basidiomycetes or wood-inhabiting ascomycetes. The primer pair ITS1-F (specific for higher fungi) and ITS4 (universal primer) amplified the internal transcribed spacer region from both ascomycetes and basidiomycetes from both pure culture and wood, as expected. The primer pair ITS1-F (specific for higher fungi) and ITS4-B (specific for basidiomycetes) was shown to reliably detect the presence of wood decay basidiomycetes in both pure culture and wood; ascomycetes were not detected by this primer pair. We detected the presence of decay fungi in wood by PCR before measurable weight loss had occurred to the wood. Basidiomycetes were identified to the species level by restriction fragment length polymorphisms of the internal transcribed spacer region.

Ascomycota↗

PubMedDate not supplied

[Comparative study of mycobactin-dependent strains of mycobacteria isolated from the wood-pigeon with Mycobacterium avium and M. paratuberculosis: study of biological and antigenic characteristics].

In this investigation three mycobacterial strains isolated in our laboratory from wood-pigeons were compared with one strain isolated by Matthews and another by Jorgensen from, respectively, a wood-pigeon and a roe-deer. The strains were also compared with various strains of Mycobacterium avium and M. paratuberculosis. The strains isolated from the wood-pigeons formed a relatively homogeneous group, which could be distinguished from M. avium and M. paratuberculosis. It was interesting to verify that most of the cultural and biochemical properties of the wood-pigeon mycobacteria were similar to those of M. paratuberculosis. The strains formed rough colonies and grew slowly in special mediums containing M. phlei extracts or mycobactin. However, one must recall that mycobactin dependence was also reported by Matthews for some strains of M. avium. The tween hydrolysis test (10 days), negative for M. avium, was positive for both the wood-pigeon mycobacteria and M. paratuberculosis. The trehalase test, which appears to be regularly positive for M. avium, was also positive for the wood-pigeon mycobacteria and M. paratuberculosis. In respect to drug susceptibility, no significant differences were observed. The organisms were resistant to most drugs studied, but were also resistant to cycloserine, in contrast to most M. avium strains. On the other hand, the organisms were not distinguished using sensitins, prepared from wood-pigeon mycobacteria and M. paratuberculosis using specifically sensitized guinea-pigs. However, the wood-pigeon mycobacteria could be clearly differentiated from M. paratuberculosis and M. avium using serology methods. Indeed, the wood-pigeon mycobacteria did not agglutinate in the presence of any of the sera defining the M. avium-intracellulare serovars (serovars 1 to 28); and by immunodiffusion in agar the wood-pigeon mycobacteria antigens formed two precipitation lines which were absent from M. paratuberculosis. Judging from our findings, the wood-pigeon mycobacteria are more closely related to M. paratuberculosis than to M. avium. It appears that biochemical and antigenic properties are not sufficient to completely differentiate these bacteria. Further studies are needed, and we plan to investigate in the near future their pathogenicity for rabbits, chicken and calves.

Animals↗

PubMed2007

Synergistic effect of heartwood extractives and quaternary ammonium compounds on termite resistance of treated wood.

This study evaluates the synergistic effect of wood extractives and quaternary ammonium compounds (QACs) on the resistance to termites of several treated wood species. Wood specimens from different natural durability classes were extracted with either hot water alone or hot water + ethanol/benzene. The extracted and unextracted wood specimens were treated with either didecyldimethylammonium tetrafluoroborate (DBF) or commercial didecyldimethylammonium chloride (DDAC) solutions and then exposed to subterranean termites, Coptotermes formosanus Shiraki, for 3 weeks under laboratory conditions. The results showed that extractives of the heartwood portions of the wood species contributed to increased resistance against termite attack in the presence of either DBF or DDAC wood preservatives. The synergistic effect of wood extractives and DBF was much clearer with Pseudotsuga menziesii (Mirbel) Franco and Tsuga heterophylla Sarg wood samples. Further studies are needed for a better understanding of the synergism between wood extractives and either DBF or DDAC using both the sapwood and heartwood portions of the same wood species.

Animals↗

PubMed2005

Influence of corn steep liquor and glucose on colonization of control and CCB (Cu/Cr/B)-treated wood by brown rot fungi.

There are increasing problems with regard to the disposal of treated wood waste. Due to heavy metals or arsenic in impregnated wood waste, burning and landfill disposal options are not considered to be environmentally friendly solutions for dealing with this problem. Extraction of the heavy metals and recycling of the preservatives from the wood waste is a much more promising and environmentally friendly solution. In order to study the scale up of this process, copper/chromium/boron-treated wood specimens were exposed to copper tolerant (Antrodia vaillantii and Leucogyrophana pinastri) and copper sensitive wood decay fungi (Gloeophyllum trabeum and Poria monticola). Afterwards, the ability of fungal hyphae to penetrate and overgrow the wood specimens was investigated. The fungal growths were stimulated by immersing the specimens into aqueous solution of glucose or corn steep liquor prior to exposure to the fungi. The fastest colonization of the impregnated wood was by the copper tolerant A. vaillantii. Addition of glucose onto the surface of the wood specimens increased the fungi colonization of the specimens; however, immersion of the specimens into the solution of corn steep liquor did not have the same positive influence. These results are important in elucidating copper toxicity in wood decay fungi and for using these fungi for bioremediation of treated wood wastes.

Basidiomycota↗

PubMed2004

Cellulose microfibril angle in the cell wall of wood fibres.

The term microfibril angle (MFA) in wood science refers to the angle between the direction of the helical windings of cellulose microfibrils in the secondary cell wall of fibres and tracheids and the long axis of cell. Technologically, it is usually applied to the orientation of cellulose microfibrils in the S2 layer that makes up the greatest proportion of the wall thickness, since it is this which most affects the physical properties of wood. This review describes the organisation of the cellulose component of the secondary wall of fibres and tracheids and the various methods that have been used for the measurement of MFA. It considers the variation of MFA within the tree and the biological reason for the large differences found between juvenile (or core) wood and mature (or outer) wood. The ability of the tree to vary MFA in response to environmental stress, particularly in reaction wood, is also described. Differences in MFA have a profound effect on the properties of wood, in particular its stiffness. The large MFA in juvenile wood confers low stiffness and gives the sapling the flexibility it needs to survive high winds without breaking. It also means, however, that timber containing a high proportion of juvenile wood is unsuitable for use as high-grade structural timber. This fact has taken on increasing importance in view of the trend in forestry towards short rotation cropping of fast grown species. These trees at harvest may contain 50% or more of timber with low stiffness and therefore, low economic value. Although they are presently grown mainly for pulp, pressure for increased timber production means that ways will be sought to improve the quality of their timber by reducing juvenile wood MFA. The mechanism by which the orientation of microfibril deposition is controlled is still a matter of debate. However, the application of molecular techniques is likely to enable modification of this process. The extent to which these techniques should be used to improve timber quality by reducing MFA in juvenile wood is, however, uncertain, since care must be taken to avoid compromising the safety of the tree.

Cell Wall↗

PubMed2002

Comparing the variation of needle and wood terpenoids in Scots pine provenances.

We determined variation in both the concentration and composition of terpenoids in needles and wood within nine Scots pine (Pinus sylvestris) provenances. Seedlings of different provenances representing a 1200-km N-S transect from Estonia to northern Finland were cultivated in Suonenjoki nursery field, central Finland, for seven years. Growth of seedlings and the number of vertical resin ducts in wood were also determined. alpha-Pinene and 3-carene were the major monoterpenes both in the needles and wood. The total monoterpene concentration was about five times higher in the needles than in the wood. A strong positive correlation was found between proportional quantities of several terpenes of the needles and wood, particularly for 3-carene, sabinene, and terpinolene. The needles contained both labdane-type and tricyclic resin acids, whereas the wood contained only tricyclic ones. The wood had a four times higher tricyclic resin acid concentration than the needles. The highest total monoterpene concentration in the needles and in the wood occurred in the most northern Muonio provenance and in the most southern Saaremaa provenance plants, respectively. The amount of high 3-carene genotype trees decreased among the northern provenances. The wood of the most northern Muonio provenance showed the lowest total resin acid concentration, but provenance did not affect total tricyclic resin acids in the needles. Korpilahti provenance trees from central Finland had the best growth in height. In addition, Korpilahti and Ruokolahti provenance trees showed largest radial growth of stem and smallest number of vertical resin ducts. The results suggest that especially the proportional quantity of 3-carene in the needles could be used in estimating the amount of this compound in the wood and vice versa.

Genotype↗

PubMed2006

The impact of domestic wood burning on personal, indoor and outdoor levels of 1,3-butadiene, benzene, formaldehyde and acetaldehyde.

The aim of this study was to quantify personal exposure and indoor levels of the suspected or known carcinogenic compounds 1,3-butadiene, benzene, formaldehyde and acetaldehyde in a small Swedish town where wood burning for space heating is common. Subjects (wood burners, n = 14), living in homes with daily use of wood-burning appliances were compared with referents (n = 10) living in the same residential area. Personal exposure and stationary measurements indoors and at an ambient site were performed with diffusive samplers for 24 h. In addition, 7 day measurements of 1,3-butadiene and benzene were performed inside and outside the homes. Wood burners had significantly higher median personal exposure to 1,3-butadiene (0.18 microg m(-3)) compared with referents (0.12 microg m(-3)), which was also reflected in the indoor levels. Significantly higher indoor levels of benzene were found in the wood-burning homes (3.0 microg m(-3)) compared with the reference homes (1.5 microg m(-3)). With regard to aldehydes, median levels obtained from personal and indoor measurements were similar although the four most extreme acetaldehyde levels were all found in wood burners. High correlations were found between personal and indoor levels for all substances (r(s) > 0.8). In a linear regression model, type of wood-burning appliance, burning time and number of wood replenishments were significant factors for indoor levels of 1,3-butadiene. Domestic wood burning seems to increase personal exposure to 1,3-butadiene as well as indoor levels of 1,3-butadiene and benzene and possibly also acetaldehyde. The cancer risk from these compounds at exposure to wood smoke is, however, estimated to be low in developed countries.

Acetaldehyde↗

PubMed2005

Predicting historical dust and wood dust exposure in sawmills: model development and validation.

Nonspecific dust measurements are used as a surrogate for wood dust exposure in sawmills. However, the wood dust component of dust has been found to vary by job and work area. Thus, the use of nonspecific dust exposure levels in epidemiologic studies may introduce exposure misclassification when assessing wood-related health effects. To improve exposure assessment in a retrospective cohort of 28,000 sawmill workers, we developed and evaluated the validity of two empirical models of exposure: one for nonspecific dust and one for wood dust. The dust model was constructed using 1,395 dust measurements collected in 13 sawmills for research or regulatory purposes from 1981 to 1997. Inter-sampler conversion factors were used to obtain inhalable dust equivalents if necessary. The wood dust model was constructed after applying adjustment factors to subtract nonwood components of the dust from the original measurements. The validity of the two models was tested against measurements (n = 213) from a technologically similar mill that was not part of the cohort study. The proportions of variability explained by the dust and wood dust models were 35% and 54%, respectively. When tested against the validation mill, the biases in the dust model were -33% for outdoor jobs and 2% for indoor jobs. The biases in the wood dust model were 2% for outdoor jobs and -3% for indoor jobs. Strong correlations were observed between the predicted and observed geometric means of jobs (0.79 and 0.70 for the dust model and wood dust model, respectively). Testing the validity of predictive models examines the generalizability of the models. The low overall bias, especially in the wood-specific model, increases our confidence in the use of these models for all sawmills to assess both nonspecific particulate and wood-related health effects in the historical cohort study.

Cohort Studies↗

PubMed2002

Health effects of subchronic exposure to low levels of wood smoke in rats.

Wood smoke is a significant source of air pollution in many parts of the United States, and epidemiological data suggest a causal relationship between elevated wood smoke levels and health effects. The present study was designed to provide information on the potential respiratory health responses to subchronic wood smoke exposures in a Native American community in New Mexico. Therefore, this study used the same type of wood under similar burning conditions and wood smoke particle concentrations to mimic the conditions observed in this community. Brown Norway rats were exposed 3 h/day, 5 days/week for 4 or 12 weeks to air as control, or to 1 or 10 mg/m3 concentrations of wood smoke particles from pinus edulis. The wood smoke consisted of fine particles (< 1 microm) that formed larger chains and aggregates having a size distribution of 63-74% in the < 1-microm fraction and 26-37% in the > 1-microm fraction. The particle-bound material was primarily composed of carbon, and the majority of identified organic compounds consisted of sugar and lignin derivatives. Pulmonary function, specifically carbon monoxide-diffusing capacity and pulmonary resistance, was somewhat affected in the high-exposure group. Mild chronic inflammation and squamous metaplasia were observed in the larynx of the exposed groups. The severity of alveolar macrophage hyperplasia and pigmentation increased with smoke concentration and length of exposure, and the alveolar septae were slightly thickened. The content of mucous cells lining the airways changed from Periodic Acid Schiff- to Alcian Blue-positive material in the low-exposure group after 90 days. Together, these observations suggest that exposure to wood smoke caused minor but significant changes in Brown Norway rats. Further studies are needed to establish whether exposure to wood smoke exacerbates asthmalike symptoms that resemble those described for children living in homes using wood stoves for heating and cooking.

Air Pollutants↗

PubMed1990

Wood tars allergy, cross-sensitization and coal tar.

In a population of 1883 patients tested for allergic contact dermatitis (1985-1988), a prevalence of 5.4% (103 cases) was seen for wood tars (ICDRG allergen, 12% pet.) sensitization. In this group (n = 103), retrospectively, a combined allergy was seen to wood tars and fragrance mix in 43% and to wood tars and balsam of Peru in 31%. A combined allergy to wood tars and coal tar was seen in 19 patients (18.5%): 14 to liquor carbonis detergens (LCD), 8 to lianthral and 3 to both LCD and lianthral. Within the group with wood tars allergy (n = 103), a minority (n = 37) had a history of atopic dermatitis. Comparison of the test results in atopic and non-atopic subgroups (within the group of 103) revealed a higher incidence of combined wood tars-fragrance mix allergy in the atopic group (n = 37). In this group, a lower incidence of combined wood tars-coal tar sensitization was seen in comparison with the non-atopic group (n = 66). The authors believe that combined "wood tars-coal tar" allergy could be the consequence of cross-sensitization rather than due to long-term previous topical treatment with tar derivatives. The high % of cross-allergy between wood tars and fragrance mix emphasizes the role of wood tars as an important indicator allergen in perfume allergy.

Coal Tar↗

PubMed1993

[Biological effect of wood dust].

The biological effect of exposure to wood dust depends on its composition and the content of microorganisms which are an inherent element of the dust. The irritant and allergic effects of wood dust have been recognised for a long time. The allergic effect is caused by the wood dust of subtropical trees, e.g. western red cedar (Thuja plicata), redwood (Sequoia sempervirens), obeche (Triplochiton scleroxylon), cocabolla (Dalbergia retusa) and others. Trees growing in the European climate such as: larch (Larix), walnut (Juglans regia), oak (Quercus), beech (Fagus), pine (Pinus) cause a little less pronounced allergic effect. Occupational exposure to irritative or allergic wood dust may lead to bronchial asthma, rhinitis, alveolitis allergica, DDTS (Organic dust toxic syndrome), bronchitis, allergic dermatitis, conjunctivitis. An increased risk of adenocarcinoma of the sinonasal cavity is an important and serious problem associated with occupational exposure to wood dust. Adenocarcinoma constitutes about half of the total number of cancers induced by wood dust. An increased incidence of the squamous cell cancers can also be observed. The highest risk of cancer applies to workers of the furniture industry, particularly those dealing with machine wood processing, cabinet making and carpentry. The cancer of the upper respiratory tract develops after exposure to many kinds of wood dust. However, the wood dust of oak and beech seems to be most carcinogenic. It is assumed that exposure to wood dust can cause an increased incidence of other cancers, especially lung cancer and Hodgkin's disease. The adverse effects of microorganisms, mainly mould fungi and their metabolic products are manifested by alveolitis allergica and ODTS. These microorganisms can induce aspergillomycosis, bronchial asthma, rhinitis and allergic dermatitis.

Dermatitis, Allergic Contact↗

PubMed2003

Asymmetric expression of a poplar ACC oxidase controls ethylene production during gravitational induction of tension wood.

Ethylene is produced in wood-forming tissues, and when applied exogenously, it has been shown to cause profound effects on the pattern and rate of wood development. However, the molecular regulation of ethylene biosynthesis during wood formation is poorly understood. We have characterised an abundant 1-aminocyclopropane-1-carboxylic acid (ACC) oxidase gene (PttACO1) in the wood-forming tissues of Populus tremula (L.) x P. tremuloides (Michx). PttACO1 is primarily expressed in developing secondary xylem, and is specifically upregulated during secondary wall formation. Nevertheless, according to GC-MS analysis combined with tangential cryosectioning, the distribution of ACC was found to be fairly uniform across the cambial-region tissues. Gravitational stimulation, which causes tension wood to form on the upper side of the stem, resulted in a strong induction of PttACO1 expression and ACC oxidase activity in the tension wood-forming tissues. The ACC levels increased in parallel to the PttACO1 expression. However, the increase on the upper (tension wood) side was only minor, whereas large amounts of both ACC and its hydrolysable conjugates accumulated on the lower (opposite) side of the stem. This suggests that the relatively low level of ACC on the tension wood side is a result of its conversion to ethylene by the highly upregulated PttACO1, and the concurrent accumulation of ACC on the opposite side of the wood is because of the low PttACO1 levels. We conclude that PttACO1 and ACC oxidase activity, but not ACC availability, are important in the control of the asymmetric ethylene production within the poplar stem when tension wood is induced by gravitational stimulation.

Amino Acid Oxidoreductases↗

PubMed2004

Patterns of auxin distribution during gravitational induction of reaction wood in poplar and pine.

Gravistimulation of tree stems affects wood development by unilaterally inducing wood with modified properties, called reaction wood. Commonly, it also stimulates cambial growth on the reaction wood side. Numerous experiments involving applications of indole-3-acetic acid (IAA) or IAA-transport inhibitors have suggested that reaction wood is induced by a redistribution of IAA around the stem. However, in planta proof for this model is lacking. Therefore, we have mapped endogenous IAA distribution across the cambial region tissues in both aspen (Populus tremula, denoted poplar) and Scots pine (Pinus sylvestris) trees forming reaction wood, using tangential cryosectioning combined with sensitive gas chromatography-mass spectrometry analysis. Moreover, we have documented the kinetics of IAA during reaction wood induction in these species. Our analysis of endogenous IAA demonstrates that reaction wood is formed without any obvious alterations in IAA balance. This is in contrast to gravitropic responses in roots and shoots where a redistribution of IAA has been documented. It is also of interest that cambial growth on the tension wood side was stimulated without an increase in IAA. Taken together, our results suggest a role for signals other than IAA in the reaction wood response, or that the gravitational stimulus interacts with the IAA signal transduction pathway.

Biological Transport↗

PubMed2002

Experimental infection of dusky-footed wood rats (Neotoma fuscipes) with Ehrlichia phagocytophila sensu lato.

Dusky-footed wood rats, Neotoma fuscipes, have been implicated in the natural maintenance of Ehrlichia phagocytophila sensu lato, the agent of human granulocytic ehrlichiosis (HGE), in northern California based on high seroprevalence and amplification of E. phagocytophila s.l. DNA from wood rat blood. In order to further assess granulocytic ehrlichiosis in wood rats, we examined wild-caught wood rats for infection and then performed experimental intra-peritoneal infections with E. phagocytophila s.l. in horse or wood rat blood, and tested animals for 120 days by polymerase chain reaction (PCR) and serology. Of 15 wood rats collected from northern California, three were antibody and PCR-positive for E. phagocytophila s.l. at the time of capture. The naturally infected wood rats remained PCR-positive for a mean of 52 days (+/- 7 SD). Experimental i.p. passage of E. phagocytophila s.l. in wood rat blood was successful in three of four wood rats and the mean duration of PCR-positivity was 75 days (+/- 21.2 SD). Experimental infection with E. phagocytophila s.l. in horse blood succeeded in all four of the recipients and the mean duration of PCR-positivity of 81 days (+/- 17.5 SD). No infected individual appeared to be ill based on feeding behavior, activity, and hydration status. These data confirm that wood rats are susceptible to E. phagocytophila s.l., may develop prolonged infection without clinical ehrlichiosis, and may play a role in maintaining E. phagocytophila s.l. in nature.

Animals↗

PubMed1995

Wood dust and sino-nasal cancer: pooled reanalysis of twelve case-control studies.

In order to examine the relationship between wood dust and sino-nasal cancer, data from 12 case-control studies conducted in seven countries were pooled and reanalyzed. The relative risks associated with wood-related jobs and with exposure to wood dust, measured using a job exposure matrix based on occupation and industry titles, were examined using logistic regression. The combined data set consisted of 680 male cases, 2,349 male controls, 250 female cases, and 787 female controls. A high risk of adenocarcinoma among men was associated with employment in wood-related occupations (odds ratio [OR] = 13.5, 95% confidence interval [CI] = 9.0-20.0) and the risk was greatest among men who had been employed in jobs with the highest wood dust exposure (OR = 45.5, 95% CI = 28.3-72.9) and increased with duration of exposure. The risk of adenocarcinoma also appeared elevated among women employed in wood-related jobs (OR = 2.5, 95% CI = 0.5-12.3), but the small number of exposed cases precluded detailed analysis. Women in wood dust-exposed jobs appeared to have an excess of squamous cell carcinoma (OR = 2.1, 95% CI = 0.8-5.5) which increased with duration of exposure. An increased risk of squamous cell carcinoma in men was seen only among those employed for 30 or more years in jobs with exposure to fresh wood (OR = 2.4, 95% CI = 1.1-5.0). The results of this analysis provide strong support to the association between exposure to wood dust in a variety of occupations and the risk of sino-nasal adenocarcinoma and are consistent with the results of individual participating studies, although the magnitude of the excess risk varied. The evidence in regard to squamous cell carcinomas was ambiguous and there was a great deal of heterogeneity observed in individual study results. This may be due to differences in risk associated with exposure to hardwoods and softwoods or with other, as yet to be identified, aspects of exposure.

Adenocarcinoma↗