Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “SOLVENTS”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources
PubMed2002

[Measurement of diffusion coefficients of polar solvent and nonpolar solvent at infinite dilution in polyethylene].

Gas chromatography is a new, fast, accurate and convenient technique to study the correlation of small molecule solvents and polymer membrane materials. It can measure many parameters of dissolution and diffusing characters of a small molecule in a polymer. The retention times and the peak widths at half-height of five small molecule solvents (n-hexane, n-heptane, n-decane, ethanol and water) in the stationary phase of polyethylene were measured. The diffusion coefficients of the small molecule solvents at infinite dilution were calculated with van Deemter equation. The graph plotted according to the results of the diffusion coefficients of n-decane at infinite dilution vs temperatures agreed with the Arrhenius equation. The variance in the diffusion coefficients at infinite dilution of five small molecule solvents was analyzed according to the differences in molecular mass and polarity.

English Abstract↗
PubMed1976

Steric inhibition of conjugation in lowest excited singlet state of 9-anthramide by hydrogen bond donor solvents: role of solvent in chemical structure.

9-Anthramide has electronic absorption and fluorescence spectra that, in water, are similar to those of anthracene. This result is attributed to steric hindrance of the 9-carboxamido group with the peri-hydrogen atoms in the 1- and 8-positions of the anthracene ring. However, in aprotic solvents, although the absorption spectrum of 9-anthramide is anthracene-like, its fluorescence spectrum is red shifted and structureless. This finding is attributed to excited-state rotation of the 9-carboxamido group into coplanarity with the anthracene ring and indicates that, in water, the hydrogen-bonded solvent cage affects the steric inhibition of conjugation in excited 9-anthramide. These findings suggest that studies of structure and reactivity of drugs in nonaqueous or solid matrixes are probably of only limited value, since in the strongly interacting aqueous media the aqueous solvent cage plays a substantial role in determining molecular structure and reactivity.

Amides↗
PubMed1987

Solubility in binary solvent systems: 8. Estimation of binary alkane plus p-dioxane solvent nonideality from measured anthracene solubilities.

Experimental solubilities are reported for anthracene in binary solvent mixtures containing p-dioxane with n-hexane, cyclohexane, n-heptane, methylcyclohexane, n-octane, cyclooctane, and isooctane at 25 degrees C. Results of these measurements, used in conjunction with the nearly ideal binary solvent (NIBS) model, enabled excess Gibbs free energies, delta GBCfh, of the seven binary solvent mixtures to be estimated. Estimated values for p-dioxane plus cyclohexane, p-dioxane plus n-heptane, and p-dioxane plus methylcyclohexane mixtures are in reasonable agreement with published values based on vapor pressure measurements.

Alkanes↗
PubMed2005

Effects of solvent polarity and solvent viscosity on the fluorescent properties of molecular rotors and related probes.

Fluorescent molecular rotors belong to a group of twisted intramolecular charge transfer complexes (TICT) whose photophysical characteristics depend on their environment. In this study, the influence of solvent polarity and viscosity on several representative TICT compounds (three Coumarin derivatives, 4,4-dimethylaminobenzonitrile DMABN, 9-(dicyanovinyl)-julolidine DCVJ), was examined. While solvent polarity caused a bathochromic shift of peak emission in all compounds, this shift was lowest in the case of molecular rotors. Peak intensity was influenced strongly by solvent viscosity in DMABN and the molecular rotors, but polarity and viscosity influences cannot be separated with DMABN. Coumarins, on the other hand, did not show viscosity sensitivity. This study shows the unique suitability of molecular rotors as fluorescent viscosity sensors.

Fluorescent Dyes↗
PubMed2004

Solvent effect on infrared spectra of methyl methacrylate in CCl4/C6H14, CHCl3/C6H14 and C2H5OH/C6H14 binary solvent systems.

Research of methyl methacrylate (MMA) in three kinds of binary solvent systems (CCl4/C6H14, CHCl3/C6H14 and C2H5OH/C6H14) on the infrared (IR) spectra was reported. Two types of carbonyl stretching vibration bands for MMA in CHCl3/C6H14 or C2H5OH/C6H14 mixtures were found with the changing of the mole fraction of CHCl3 (XCHCl3) or C2H5OH (XC2H5OH). The carbonyl stretching vibration bands at lower frequencies in the above two mixtures were attributed to the formation of hydrogen bonding between MMA and CHCl3 or C2H5OH. While in CCl4/C6H14 mixtures there was only one type of carbonyl stretching vibration band of MMA. Good linear correlations between the frequencies of C=O or C=C stretching vibration band of MMA and XCCl4, XCHCl3 or XC2H5OH were found, respectively. The solute-solvent interactions in the three different binary solvent systems were discussed in detail.

Carbon Tetrachloride↗
PubMed1984

Experimental observations of the hydrodynamic behavior of solvent systems in high-speed counter-current chromatography. I. Hydrodynamic distribution of two solvent phases in a helical column subjected to two types of synchronous planetary motion.

Hydrodynamic distribution of two-phase solvent systems in a rotating helical column subjected to centrifugal fields produced by two different types of synchronous planetary motion has been studied by the use of the combined horizontal flow-through coil planet centrifuge. With continuous elution of the mobile phase, the simpler type of motion resulted in low retention of the stationary phase in the column whereas a more complex motion, which produces a quasi-radial centrifugal field varying in both intensity and direction, yielded high stationary phase retention for commonly used solvent systems having a wide range of hydrophobicity. These solvent systems display highly complex modes of hydrodynamic interaction in the coil according to their particular physical properties.

Chromatography, High Pressure Liquid↗
PubMed1999

Ion-exchange chromatography separation of the detergent and the solvent from immunoglobulins after solvent-detergent treatment.

For inactivation of lipid-enveloped viruses during the immunoglobulin production, the solvent-detergent (S/D) method was applied. Tri-n-butyl phosphate (solvent) and Triton X-100 (detergent) were removed from S/D treated immunoglobulins by ion-exchange chromatography on Q-Sepharose Fast Flow (FF). During the chromatographic procedure immunoglobulins remained bound on a Q-Sepharose FF, whereas solvent and detergent were eluted by washing with starting buffer. Elution of immunoglobulins was achieved by increasing the ionic strength of the starting buffer. The final immunoglobulin preparation contained less than 10 microg/ml of Triton X-100 and less than 2 microg/ml tri-n-butyl phosphate. It was confirmed that the S/D procedure did not cause a significant change in polymers and specific antibodies content. Immunoglobulin classes were also not affected by the same procedure.

Chromatography, Ion Exchange↗
PubMed2002

A model to represent solvent effects on the chemical stability of solutes in mixed solvent systems.

The applicability of the combined nearly ideal binary solvent/Redlich-Kister (CNIBS/R-K) equation for quantification of solvent effects on the stability of a solute is shown employing the experimental data of three solutes in different aqueous binary solvents. The proposed model provides a simple computational method to correlate/predict the instability rate constant of a drug in mixed solvent systems. The accuracy of the model is compared with that of a model proposed by Connors and co-workers employing various methods including mean percentage deviation (MPD) as comparison criteria. The obtained overall MPD values for the proposed model to correlate and predict the instability rate constants are 2.05 +/- 1.44 and 4.41 +/- 3.21%, respectively, where the corresponding values for Connors' model are 4.34 +/- 3.28 and 10.74 +/- 9.86%. The results suggest that by using only five experimental instability rate constants at different concentrations of the cosolvent in a binary mixture, it is possible to predict unmeasured values falling between data points within an acceptable error range.

Algorithms↗
PubMed2001

Sensitized photoxygenation of piroxicam in neat solvents and solvent mixtures.

Detection of O(2)(1Delta(g)) phosphorescence emission, lambda(max)=1270 nm, following laser excitation and steady state methods were employed to determine the total rate constant, k(T), for the reaction between the non-steroidal anti-inflammatory drug piroxicam (PRX) and singlet oxygen in several solvents. Values of k(T) ranged from 0.048+/-0.003 x 10(6) M(-1) s(-1) in chloroform to 71.2+/-2.2 x 10(6) M(-1) s(-1) in N,N-dimethylformamide. The chemical reaction rate constant, k(R), was determined by using thermal decomposition of 1,4-dimethylnaphthalene endoperoxide as the singlet oxygen source. In acetonitrile, the k(R) value is equal to 5.0+/-0.4 x 10(6) M(-1) s(-1), very close to the k(T) value. This result indicates that, in this solvent, the chemical reaction corresponds to the main reaction path. Dependence of total rate constant on the solvent parameters pi* and beta can be explained in terms of a reaction mechanism that involves the formation of a perepoxide intermediate. Rearrangement of the perepoxide to dioxetane followed by ring cleavage and transacylation accounts for the formation of N-methylsaccharine and N-(2-pyridyl)oxamic acid, the main reaction products. Data obtained in dioxane-water (pH 4) mixtures with neutral enolic and zwitterionic tautomers of piroxicam in equilibrium show that the zwitterionic tautomer reacts with singlet oxygen faster than the enolic tautomer.

Anti-Inflammatory Agents, Non-Steroidal↗
PubMed2004

Solvent effects on the conversion of dicopper(II) micro-eta(2):eta(2)-peroxo to bis-micro-oxo dicopper(III) complexes: direct probing of the solvent interaction.

A new tridentate ligand, PYAN, is employed to investigate solvent influences for dioxygen reactivity with [Cu(PYAN)(MeCN)]B(C(6)F(5))(4) (1). Stopped-flow kinetic studies confirm that the adducts [[u(II)(PYAN)]2)(O(2))][B(C(6)F(5))(4)](2) (2(Peroxo)) and [[u(III)(PYAN)]2)(O)(2)][B(C(6)F(5))(4)](2) (2(Oxo)) are in rapid equilibrium. Thermodynamic parameters for the equilibrium between 2(Peroxo) and 2(Oxo) re as follows: THF, deltaH degrees approximately -15.7 kJ/mol, deltaS degrees approximately -83 J/K.mol; acetone, deltaH degrees approximately -15.8 kJ/mol, deltaS degrees approximately -76 J/K.mol. UV-visible absorption and resonance Raman spectroscopic signatures demonstrate that the equilibrium is highly solvent dependent; the mixture is mostly 2(Peroxo) in CH(2)Cl(2), but there are significantly increasing quantities of 2(Oxo) along the series methylene chloride --> diethyl ether --> acetone --> tetrahydrofuran (THF). Copper(II)-N(eq) stretches (239, 243, 244, and 246 cm(-)(1) in CH(2)Cl(2), Et(2)O, acetone, and THF, respectively) are identified for 2(Peroxo), but they are not seen in 2(Oxo), revealing for the first time direct evidence for solvent coordination in the more open 2(Peroxo) structure.

Copper↗
PubMed2005

Effect of solvent, temperature, and solvent-to-solid ratio on the total phenolic content and antiradical activity of extracts from different components of grape pomace.

Grape byproducts were subjected to an extraction process under various different experimental conditions (namely, solvent type, temperature, solvent-to-solid ratio, time contact, and raw material) in order to study the effect of these conditions on the yield of phenolic compounds and the corresponding antiradical activity of extracts. Although the order of decreasing capacity to extract soluble materials was ethanol > methanol > water, methanol was the most selective for extracting phenolic compounds. Temperature and solvent-to-solid ratio were found to have a critical role in extraction efficiency; values of 50 degrees C (between 25 and 50 degrees C) and 1:1 (between 1:1 and 5:1) maximized the antiradical activity of phenolic extracts. In addition, extracts from grape samples previously subjected to distillation reached higher antiradical values in comparison to those coming directly from pressing; in both cases, seed extracts showed better results than those of stem when ethanol or water was employed, whereas the opposite occurred in the case of methanol. These differences were attributed to the different phenolic compositions of the considered fractions.

Free Radicals↗
PubMed2006

Adding explicit solvent molecules to continuum solvent calculations for the calculation of aqueous acid dissociation constants.

Aqueous acid dissociation free energies for a diverse set of 57 monoprotic acids have been calculated using a combination of experimental and calculated gas and liquid-phase free energies. For ionic species, aqueous solvation free energies were calculated using the recently developed SM6 continuum solvation model. This model combines a dielectric continuum with atomic surface tensions to account for bulk solvent effects. For some of the acids studied, a combined approach that involves attaching a single explicit water molecule to the conjugate base (anion), and then surrounding the resulting anion-water cluster by a dielectric continuum, significantly improves the agreement between the calculated pK(a) value and experiment. This suggests that for some anions, particularly those concentrating charge on a single exposed heteroatom, augmenting implicit solvent calculations with a single explicit water molecule is required, and adequate, to account for strong short-range hydrogen bonding interactions between the anion and the solvent. We also demonstrate the effect of adding several explicit waters by calculating the pK(a) of bicarbonate (HCO(3)(-)) using as the conjugate base carbonate (CO(3)(2-)) bound by up to three explicit water molecules.

Acids↗
PubMed2006

Calculation of solvent shifts on electronic g-tensors with the conductor-like screening model (COSMO) and its self-consistent generalization to real solvents (direct COSMO-RS).

The conductor-like screening model (COSMO) was used to investigate the solvent influence on electronic g-values of organic radicals. The previously studied diphenyl nitric oxide and di-tert-butyl nitric oxide radicals were taken as test cases. The calculations employed spin-unrestricted density functional theory and the BP and B3LYP density functionals. The g-tensors were calculated as mixed second derivative properties with respect to the external magnetic field and the electron magnetic moment. The first-order response of the Kohn-Sham orbitals with respect to the external magnetic field was determined through the coupled-perturbed DFT approach. The spin-orbit coupling operator was treated using an accurate multicenter spin-orbit mean-field (SOMF) approach. Provided that important hydrogen bonds are explicitly modeled by a supermolecule approach and that the basis set is sufficiently saturated, the COSMO calculations lead to accurate predictions of isotropic g-shifts with deviations of not more than 100 ppm relative to experiment. Very accurate results were obtained by employing a recently developed self-consistent modification of the COSMO method to real solvents (COSMO-RS), which we briefly introduce in this paper as direct COSMO-RS (D-COSMO-RS). This model gives isotropic g-shifts of similar high accuracy for water without using the supermolecule approach. This is an important result because it solves many of the problems associated with the supermolecule approach such as local minima and the choice of a suitable model system. Thus, the self-consistent D-COSMO-RS incorporates some specific solvation effects into continuum models, in particular it appears to successfully model the effects of hydrogen bonding. Although not yet widely validated, this opens a novel approach for the calculation of properties which so far only could be calculated by the inclusion of explicit solvent molecules in continuum solvation methods.

Algorithms↗
PubMed2001

What is the stabilizing interaction with nucleophilic solvents in the transition state for solvolysis of tertiary derivatives: nucleophilic solvent participation or nucleophilic solvation?

[structure: see text] We propose that controversy concerning the mechanism for solvolysis at tertiary carbon is semantic and can be avoided by making a clear distinction between (1) nucleophilic solvent participation, which is stabilization of the transition state for concerted solvolysis by formation of a partial covalent bond to the solvent nucleophile, and (2) nucleophilic solvation, which is stabilization of the transition state for stepwise solvolysis through carbocation or ion pair intermediates by charge-dipole interactions with nucleophilic solvents.

Catalysis↗
PubMed2004

Application of a solvent-tolerant microbial consortium for biofiltration of extremely high concentration gaseous solvent streams.

The aerobic biological oxidation of 2-propanol (isopropyl alcohol, IPA) at extremely high concentrations in air by an enriched solvent-tolerant microbial consortium operating at ambient temperature was evaluated for six months. Solvent-tolerant microbial cells were immobilised onto porous glass pall rings and fed with either IPA or its metabolic product acetone as sole carbon source. Successful biofiltration of solvent vapour at a concentration of 24 g m(-3) was achieved with oxidation of up to 100% total inlet carbon. The maximum IPA mass loading and IPA elimination capacity (EC) was 1700 g m(-3) h(-1). This performance exceeds all previous values published in the literature for similar processes. A slip feed experiment, using acetone, was also performed in order to assess the substrate specificity performance. The biofilter responded successfully to a switch from acetone to IPA as sole carbon source, displaying little reduction in overall organic carbon removal.

2-Propanol↗
PubMed1998

Active efflux of organic solvents by Pseudomonas putida S12 is induced by solvents.

Induction of the membrane-associated organic solvent efflux system SrpABC of Pseudomonas putida S12 was examined by cloning a 312-bp DNA fragment, containing the srp promoter, in the broad-host-range reporter vector pKRZ-1. Compounds that are capable of inducing expression of the srpABC genes include aromatic and aliphatic solvents and alcohols. General stress conditions such as pH, temperature, NaCl, or the presence of organic acids did not induce srp transcription. Although the solvent efflux pump in P. putida S12 is a member of the resistance-nodulation-cell division family of transporters, the srpABC genes were not induced by antibiotics or heavy metals.

Anti-Bacterial Agents↗
PubMed2000

Degradation products generated by sonication of benzyl alcohol, a sample preparation solvent for the determination of residual solvents in pharmaceutical bulks, on capillary gas chromatography.

Benzyl alcohol used as the sample preparation solvent in the determination of residual solvents in pharmaceutical bulks yielded benzene, toluene, and benzaldehyde on capillary gas chromatography (GC) by sonication. The factors responsible for compounds generated are discussed. The quality of benzyl alcohol and the type of sonicator were not involved in the generation of benzene, toluene, and benzaldehyde, whereas matrix contributions were observed. The degradation profiles of benzyl alcohol and its analogous compounds obtained by pyrolysis-GC/mass spectrometric analysis were similar to those obtained by sonication, suggesting that benzyl alcohol is degraded by the high local heat generated by sonication. Consequently, no matter how long it may take to dissolve bulk substances in benzyl alcohol completely, we do not recommend the use of a sonicator in sample preparation for the determination of residual solvents in pharmaceutical bulks.

Benzyl Alcohols↗
PubMed2004

Surface tension calculation of mixed solvents with respect to solvent composition and temperature by using Jouyban-Acree model.

Applicability of a solution model, i.e. Jouyban-Acree model (JAM), for calculating surface tension of binary and ternary solvents at various temperatures has been shown employing experimental surface tension data collected from the literature. The accuracy of the model was evaluated by calculating average percentage deviation (APD) between calculated and observed values. The obtained overall APD (+/-S.D.) for JAM using binary solvent data were 4.06 (+/-4.27) and 8.07 (+/-9.78)%, respectively for correlative and predictive analyses. The corresponding values for the best similar model from the literature were 8.86 (+/-6.40) and 37.10 (+/-27.65)% and the mean APD differences between JAM and previously published model were significant (p<0.003). The capability of JAM for correlating surface tension of ternary solvents at various temperatures was also shown and the overall APD was 1.39 (+/-0.37)%.

Models, Theoretical↗