Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Retrograde Obturation”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources

Dye leakage of four root end filling materials: effects of blood contamination.

The purpose of this study was to compare the amount of dye leakage (in the presence versus absence of blood) in root end cavities filled with amalgam, Super EBA, IRM, and a mineral trioxide aggregate. After removing the anatomical crowns of 90 extracted human teeth, their roots were instrumented and obturated. Except for their apical 2 mm, the root surfaces were sealed with nail polish. After removal of the apical 2 to 3 mm of each root, a standardized root end cavity was prepared. Five root ends were filled with gutta-percha and no sealer, and another five root ends were filled with sticky wax. These served as positive and negative controls, respectively. The remaining 80 roots were divided into four equal groups and filled with the test materials. For each material, half of the root end cavities were dried prior to placing the filling material. The remaining half were filled after they were contaminated with blood. All 90 roots were then immediately placed in 1% methylene blue dye for 72 h. Finally, the roots were split and linear dye penetration was measured and statistically analyzed (analysis of variance). Presence or absence of blood had no significant effect on the amount of dye leakage. However, the results showed that there was a significant leakage difference between the root end filling materials (p < 0.0001). Mineral trioxide aggregate leaked significantly less than other materials tested with or without blood contamination of the root end cavities.

Aluminum Compounds↗

Comparison of Diaket and MTA when used as root-end filling materials to support regeneration of the periradicular tissues.

AIM: The objective of this study was to evaluate on a comparative basis the potential for mineral trioxide aggregate (MTA) and Diaket to promote periradicular tissue regeneration when used as surgical root-end filling materials. METHODOLOGY: Seven dogs weighing between 15 and 25 kg were anesthetized prior to having the root canals of their mandibular premolars accessed, cleaned, shaped and obturated. Coronal access cavities were restored with IRM. Surgical access to the root ends was established and the root ends were resected and prepared with ultrasonic tips. Root-end fillings of either MTA or thickly mixed Diaket were randomly assigned to the preparations. Reflected tissues were repositioned and sutured with 4-0 vicryl sutures. Sixty days postsurgery, the animals were killed, perfused with 10% neutral buffered formalin and the third and fourth premolars removed in block sections. The specimens were demineralized and sectioned at 6-microm intervals for histological assessment. Sections were stained with either haematoxylin and eosin or Gomori's one step trichrome stain and examined under the light microscope. All evaluations were made by two calibrated examiners and gradings were scored based on established criteria. The raw data was evaluated statistically using anova after adjusting for the animal block effect. RESULTS: Statistical evaluation indicated that there were no statistical differences between the observed regenerative responses of the tissues to the two root-end filling materials. CONCLUSIONS: Both Diaket and MTA can support almost complete regeneration of the periradicular periodontium when used as root-end filling materials in periradicular surgery on noninfected teeth.

Aluminum Compounds↗

Use of glass ionomers as retrofilling materials.

Many materials have been used as retrofillings. Because of the bonding property of glass ionomer cement, this study was conducted to evaluate its possible use as a retrofilling material. Seventy human maxillary anterior teeth were chosen. The root canal systems were cleansed and shaped, and the teeth were assigned to six groups of 10 each. The root canals were obturated with gutta-percha and Grossman sealer, and the apical 2 mm of each root was resected. In all groups a retrofilling preparation was made to a depth of a number 331 bur. The apical preparations were filled in the following manner: silver amalgam (group I), silver amalgam plus two layers of varnish (group II), Ketac-Silver plus two layers of varnish (group III), Ketac-Silver without varnish (group IV), Ketac-Fil plus two layers of varnish (group V), Ketac-Fil without varnish (group VI), and Ketac-Bond (group VII). All the root surfaces with the exception of 2 mm from the resected line were coated with two layers of clear varnish. All the teeth were immersed in methylene blue for 24 hours. After vertical sectioning, dye penetration was measured under a dissecting microscope. The mean apical leakage (in millimeters) was as follows: I = 0.57, II = 0.39, III = 0.22, IV = 0.54, V = 0.11, VI = 0.46, and VII = 0.17. One-way analysis of variance performed on the group means indicated that Ketac-Fil with varnish (group V) and Ketac-Bond (group VII) had significantly less leakage than other groups (p less than 0.05). This study indicates that Ketac-Fil and Ketac-Bond may have potential as retrofilling materials.

Cermet Cements↗

Polymicrobial coronal leakage of super EBA root-end fillings following two methods of root-end preparation.

The aim of this study was to compose in vitro coronal leakage of a super EBA root-end filling material after two root-end cavity preparation techniques. A mixed anaerobic microbial marker was used. Forty-five extracted human teeth with straight, single root canals were prepared chemo-mechanically to a size 40 master apical file. The teeth were divided into experimental groups (35 teeth) and control groups (10 teeth). Forty teeth (35 experimental teeth and five negative control teeth) were obturated by lateral condensation of cold gutta-percha with Tubliseal EWT sealer. The remaining five teeth were not obturated and served as positive controls. These teeth were stored for 6 months in artificial saliva. The apical 3-4 mm of each root was resected perpendicular to the long axis of the root and a root-end cavity prepared to a depth of 3 mm using either a size 008 rosehead burr or an ultrasonic retroprep tip. Freshly mixed EBA cement was placed into the root-end cavity. The entire root surface of each tooth, except the cutting surface of the apical end, was sealed with nail varnish. The coronal part of each root canal was sealed with the cut end of a tube and placed in a bottle containing sterile Brain Heart Infusion Broth (BHIB). A marker consisting of Anaerobic streptococci and Fusobacterium nucleatum in BHIB was placed in each coronal chamber at 7-day intervals and daily observations were made for bacterial growth in the apical chamber for 60 days. All positive control teeth exhibited bacterial leakage within 48 h, whilst the apical chamber of negative control teeth remained uncontaminated throughout the test period. Fifty-nine percent (n = 10) of the specimens prepared with a burr showed leakage after 90 days, whilst only 22% (n = 4) of the ultrasonically prepared group showed leakage after the same time. The group prepared with ultrasonic tips showed statistically significant less specimens with leakage (P < 0.05) than the group prepared with burrs.

Dental Leakage↗

Tissue response following CO2 laser application in apical surgery: light microscopic assessment in dogs.

The potential advantages of CO2 laser in apical surgery have not been established histologically. Therefore, the long-term effects of CO2 laser on the apical and periapical tissues were examined histologically in dogs 6 months after apical surgery. Lased specimens and unlased controls showed periapical inflammatory and osteogenic reactions. Lased root surfaces revealed craters with a superficial charred layer closely associated with new cementum-like matrix. The subjacent dentin appeared tubule-free and eosinophilic. Lased bone trabeculae showed a charred layer with a deeper osteocyte-free zone. The charred layer was covered by new bone. Detached charred segments in the marrow space and periapical inflammatory infiltrate were intimately associated with multinucleated giant cells, some containing minute char particles. Such cells were absent from the root and trabecular char linings. In addition, the charred surfaces were free of hard tissue resorption. These results suggest that CO2 laser does not hinder healing when applied in apical surgery.

Alveolar Process↗

A prospective, randomized, comparative clinical study of resin composite and glass ionomer cement for retrograde root filling.

OBJECTIVE: To compare the clinical and radiographic treatment outcome of retrograde root filling with either dentin-bonded resin composite (Retroplast, RP) or glass ionomer cement (Chelon-Silver, CS). STUDY DESIGN: A prospective, randomized clinical study of 134 consecutive patients with indication of retrograde root filling of an incisor, canine, premolar, or first molar. Either RP or CS was chosen at random as retrograde filling material. Either material was applied onto the entire resection surface after prepared slightly concave. This preparation technique makes a sealing of the entire resection surface possible and prevents marginal contraction gaps during polymerization. A total of 122 patients were available for 1-year follow-up. RESULTS: After 1 year the proportion of successful cases was significantly higher in the RP group (73%) than in the CS group (31%) (p<0.001). Doubtful healing with a need for a longer observation period was seen in 17% of the RP cases and 19% of the CS cases. The proportion of failures in the RP group (10%) was significantly lower than that in the CS group (50%) (p<0.001). Most of the unsuccessful CS cases failed due to loosening of the retrograde filling. CONCLUSIONS: Dentin-bonded RP applied onto the entire, slightly concave resection surface is a predictable apical sealant characterized by a high success rate. In contrast, retrograde root filling with CS results in an unacceptably high failure rate due to insufficient bonding strength to the concave resection surface.

Bisphenol A-Glycidyl Methacrylate↗

Apical leakage in maxillary type IV premolars with three different endodontic treatments.

The aim of this study was to evaluate the sealing ability in orthogradely filled, apicoectomised and retrogradely filled maxillary premolars with two canals and two separate apical foramina. The root canals of 51 extracted maxillary premolars of type IV were uniformly shaped and filled by means of lateral condensation and subsequently randomly divided into three groups of 17 teeth each. The teeth of groups II and III received an apicoectomy. In group III an additional retrograde seal (Ketac Fil) was applied. Group I served as control. All specimens were immersed in a methylene blue solution for 24 h. The teeth were cross-sectioned and the maximal dye-penetration was measured. The significantly least dye-penetration was observed in group II (apicoectomy only), followed by group I and group III. The differences among all groups were statistically significant (p<0.05). Most of the retrograde restorations in group III revealed circular colouration around the retrograde fillings extending to the gutta percha. Although the teeth of group II revealed the least dye-penetration, an apicoectomy cannot be favoured against an endodontic retreatment in maxillary premolars of type IV. The application of retrograde fillings using Ketac Fil must be considered critically.

Apicoectomy↗

[The preparation of retrocavities in apicoectomies].

The purpose of this in vitro and in vivo study was to compare the quality of retrograde cavities and retrofilling using various retrograde techniques (microhead, ultrasonic). The quality was evaluated on the basis of dye penetration, macroscopic control, and both light microscopic and scanning electron microscopic examination. A total of 40 extracted teeth with a single canal were analyzed. The clinical result was evaluated in 25 patients with root-filled teeth and the indication of apicoectomy. Statistical analysis indicated that the seal was significantly better with ultrasonically prepared cavities than with microhead preparation. Retrofillings prepared ultrasonically also showed significantly fewer peripheral fissures. The scanning electron microscopic examination, however, demonstrated peripheral fissures in all filled teeth. Furthermore, the cavities prepared ultrasonically had a smoother surface and a lower smear layer. This preparation produced a more pleasing final result. The advantages of better accessibility during the preparation, namely, more precise preparation of the retrofilling and only minor substance loss were confirmed clinically. Using the ultrasonic equipment, absolutely sterile working conditions are present.

Apicoectomy↗

Comparison of apical sealing methods. A preliminary report.

A comparison of the seal provided by gutta-percha root canal filling, heat-sealed gutta-percha, retrograde amalgam filling, and retrograde Durelon filling was made by observation of dye penetration around the above filling materials in extracted teeth. A small but not significant difference between gutta-percha, heat-sealed gutta-percha, and retrograde amalgam was noted. Retrograde Durelon filling gave a poor seal in comparison to gutta-percha and retrograde amalgam filling, but the difference between it and the heat seal was not significant.

Apicoectomy↗

Sealing quality of polycarboxylate cements when compared to amalgam as retrofilling material.

Four hundred roots were uniformly prepared for retrofilling. One hundred of these were retrofilled with amalgam and served as controls for the study. The polycarboxylate cements--Durelon, PCA, and Poly C--were each used as retro-filling material for 100 roots. After immersion in 2 per cent aqueous methylene blue for 7 days, the roots were sectioned in 1 to 2 mm. increments to determine the depth of dye penetration. The depth of dye penetration was used as a measure of their sealing effectiveness. The groups were compared statistically by means of a t test. All cements were significantly different from amalgam. All cements performed inferiorly to amalgam, an already accepted retrofilling material.

Acrylates↗

Retrograde root filling with amalgam and Cavit.

In a 3-year review of 218 teeth with retrograde root filling with amalgam orCavit, the results obtained with the former proved significantly better than those obtained with the latter. The difference seemed to be due to a better obliteration of the canal by amalgam. The obliterating effect of amalgam probably eliminates the need for revision of incomplete othograde root filling, for example, in cases with a post in the root canal. Irrespective of type of filling materials, the results were less good in cases with marginal bone loss.

Alveolar Process↗

A comparative sealability study of different retrofilling materials.

The purpose of the study was to compare the sealing properties of Cavit and zinc polycarboxylate cement with silver amalgam when used as retrofilling materials of root canals. The retrofilling materials were placed at the apices of dogs' teeth and were left there for a 6-month period, after which time the teeth were extracted and the marginal leakage was evaluated by C14-labeled urea. A second part of the study included an in vitro placement of the retrofillings. Previously extracted teeth were used and the same retrofilling materials were placed. They were left to set for 2 days in physiologic saline solution. Then the same evaluation for leakage was used. The purpose of the second part was to compare and evaluate the effect of aging on sealability. Under the conditions of this study, amalgam afforded a better seal in the 6-month group than polycarboxylate cement or Cavit. Both Cavit and polycarboxylate cement showed more leakage in the 6-month group. The deterioration of the seal afforded by Cavit in the 6-month group was statistically significant. The seal of amalgam was the only one which was improved by time.

Acrylic Resins↗

The apical seal via the retrosurgical approach. II. An evaluation of retrofilling materials.

In this investigation heat-sealed gutta-percha (A) reinforced with Adaptic (B), ASPA (C), Cupralloy without (D) and with (E) varnish, Spheraloy without (F) and with (G) varnish were used as retrofilling materials. Seventy maxillary central incisors with Class I canal anatomy were selected. Marginal leakage at the apical filling/root canal interface was evaluated quantitatively by means of a fluorescent dye technique. All statistical tests were computed at the 5 percent level of significance. Analysis of variance revealed that differences in microleakage among retrofillings were significant. Tukey's test of multiple contrasts was used to isolate statistically significant differences between all pairs of means. The following results were obtained: D F A G E C B Retrofillings are ranked in descending order of microleakage. Means that are linked were not significantly different.

Bisphenol A-Glycidyl Methacrylate↗