Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Lipid Bilayers”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources
PubMed1998

Insertion of magainin into the lipid bilayer detected using lipid photolabels.

We investigated the interaction of the antimicrobial peptides Ala19-magainin 2 amide and magainin 2 amide with lipid using two lipid photolabels, azidobenzoyl galactosylceramide (GalCer-PL) and azidobenzoylamido capryloyl galactosylceramide (GalCer-C8-PL), which position their photosensitive groups near the apolar-polar interface and near the center of the bilayer, respectively. Magainins have been postulated to permeabilize membranes either by inserting in a transmembrane fashion into the bilayer and forming a channel or by binding to the surface of the bilayer and disturbing lipid packing. Evidence for channel formation has been difficult to obtain, possibly because only a fraction of the peptide may form a channel at any one time and because the channels may have a short lifetime. Both photolabels significantly labeled the peptides when bound to acidic phospholipid vesicles. The extent of labeling by GalCer-C8-PL was at least 70% of that by GalCer-PL, indicating that some of the peptide was inserted deeply into the bilayer at least transiently. The extent of labeling of Ala19-magainin 2 amide increased significantly with an increase in the peptide to lipid mole ratio, indicating cooperativity and supporting the channel model. The extent of labeling of this peptide was maximal by 30 s and did not change over 30 min, indicating that peptide insertion is rapid and either that the peptide remains inserted for at least 30 min or that equilibrium between inserted and noninserted peptide is achieved by 30 s. The latter is supported by other studies in the literature. Use of this hydrophobic photolabeling technique has permitted detection of peptide monomers which inserted into the bilayer and/or formed a channel at some time during the labeling procedure.

Animals↗
PubMed1992

Lateral diffusion and percolation in two-phase, two-component lipid bilayers. Topology of the solid-phase domains in-plane and across the lipid bilayer.

Fluorescence recovery after photobleaching (FRAP) has recently been used to examine the percolation properties of coexisting phases in two-component, two-phase phosphatidylcholine bilayers [Vaz, W. L. C., Melo, E. C. C., & Thompson, T. E. (1989) Biophys. J. 56, 869-876]. We now report the use of FRAP to study two additional problems in similar systems. The first is the effect of solid-phase obstacles on the lateral diffusion in the fluid phase. The second is the question of whether or not, in a single bilayer, solid-phase domains in one monolayer are exactly superimposed on solid domains in the apposing monolayer. To address the first problem, the lateral diffusion of N-(7-nitrobenzoxa-2,3-diazol-4-yl)-1-palmitoyl-2-oleoylphosp hatidylethanolamine (NBD-POPE), a probe soluble only in the fluid phase when solid and fluid phases coexist, has been studied in the mixture N-lignoceroyldihydrogalactosylceramide (LigGalCer)/dipalmitoylphosphatidylcholine (DPPC). Percolation of the fluid phase occurs at a high mass fraction of solid phase. This indicates that the solid domains have a centrosymmetric shape, a characteristic which makes this a good experimental system to test theoretical simulations of diffusion in an archipelago. It is shown that agreement between theory and experiment is poor, a result that had already been observed when the obstacles were integral membrane proteins. We develop an effective-medium model for diffusion in two-phase systems which explains both our results and those obtained with integral proteins. The distinctive feature of the model is the consideration of an annular region around the obstacles where the lipids are more ordered than in the bulk fluid phase. The diffusion coefficient is then calculated by extending the free area model to two-phase systems, taking these annuli into account. The second question, the organization of the solid-phase domains across the lipid bilayer, is examined in the systems LigGalCer/DPPC and dimyristoylphosphatidylcholine (DMPC)/distearoylphosphatidylcholine (DSPC) by comparing the diffusion of a fluid-phase-soluble, gel-phase-insoluble lipid derivative which spans the two monolayers of a bilayer (NBD-membrane-spanning-phosphatidylethanolamine, NBD-msPE) with that of a probe which is restricted to a single monolayer. In LigGalCer/DPPC, 20:80, the distribution of solid domains in one of the monolayers is independent of the distribution in the apposing monolayer. In contrast, in DMPC/DSPC, 50:50, the solid domains in one monolayer are exactly superimposed upon the solid domains existing in the apposing monolayer.

Diffusion↗
PubMed1997

Volatile anaesthetic effects on calcium conductance of planar lipid bilayers formed with synthetic lipids or extracted lipids from sarcoplasmic reticulum.

Volatile anaesthetics are known to increase leakage of calcium from the light fraction of skeletal sarcoplasmic reticulum (L-SR) which has no calcium release channels. To explore the role of the lipid environment, we have examined the effect of volatile anaesthetics on calcium conductance (gCa) of lipid membranes. Planar lipid bilayers were formed with a mixture of synthetic phospholipids and cholesterol, resembling the composition of SR membranes, or with lipids extracted from skeletal L-SR, gCa was estimated by calculating the calcium transference number (tCa) using diffusion potential measurements. Membranes formed with L-SR-extracted lipids had a higher gCa than membranes formed with synthetic lipids. Volatile anaesthetics increased total conductance and gCa in a dose-dependent manner, but did not affect tCa or membrane specific capacitance. In membranes formed with L-SR-extracted lipids, isoflurane induced the largest increase in gCa (1260 (SEM 304) % increase, n = 4, 0.94 mmol litre-1), followed by enflurane (264 (75)%, n = 5, 1.88 mmol litre-1) and halothane (53 (33)%, n = 5; 1.54 mmol litre-1). In membranes formed with synthetic lipids, volatile anaesthetic-induced increases in gCa followed the same trend but were larger. Volatile anaesthetics increased gCa without changing the ionic selectivity of membranes. However, the magnitude of the increase in gCa in the presence of volatile anaesthetics cannot account for the previously observed calcium leakage from L-SR vesicles. Therefore, the volatile anaesthetic-induced increase in calcium leakage in L-SR vesicles must be mediated via other pathways involving membrane proteins.

Anesthetics, Inhalation↗
PubMed1977

Properties of lipid bilayer membranes made from lipids containing phytanic acid.

Besides the preparation of phytanic acid (3,7,11,15-tetramethylhexadecylic acid) according to the Dumas-Stass reaction, the synthesis of four different lipids containing phytanic acid residues is described. Diphytanoyl phosphatidylcholine was synthesized beginning from glycerylphosphorylcholine, whereas the other lipids, diphytanoyl phosphatidylethanolamine, diphytanoyl phosphatidylserine and monophytanoyl glyceride were prepared by total synthesis. Some properties of lipid bilayer membranes made from the lipids containing phytanic acid were investigated. The specific capacity of these membranes was measured. Its value of approximately 400 nF cm-2 was found to be similar to the value of membranes from lipids with unbranched fatty acid residues. Charge pulse experiments were performed using dipicrylamine as a molecular probe of membrane structure. The results were discussed on the basis of a higher viscosity of the membranes from lipids containing phytanic acid residues compared with unbranched fatty acid residues.

Amines↗
PubMed1984

On the role of lipid-bilayer elasticity for the lipid-protein interaction and the indirect protein-protein coupling.

The present paper deals with the curvature (or splay) elasticity of lipid bilayers and its possible consequences for the microscopic organization of membranes. Experimental studies of the microstructure of lipid-lipid and lipid-protein mixtures are reported and discussed in terms of this type of membrane elasticity. In particular, evidence is provided that the elastic distortion of lipid bilayers caused by the incorporation of proteins can lead to mechanisms of the indirect protein-protein interaction. Finally the question is discussed whether these mechanisms could also play a role for the formation of enzyme complexes in biological membranes.

Dimyristoylphosphatidylcholine↗
PubMed1999

Location and orientation of DODCI in lipid bilayer membranes: effects of lipid chain length and unsaturation.

The location and orientation of a linear dye molecule, DODCI, in lipid bilayer membrane were determined by the effect of viscosity and refractive index of the aqueous medium on the fluorescence properties of the dye bound to the membrane. The membrane-bound dye is solubilized in two sites, one near the surface (short fluorescence lifetime) and another in the interior of the membrane (long lifetime). The ratio of the dye in the two locations and the orientation of the dye (parallel or perpendicular to the membrane) are sensitive to the lipid chain length and unsaturation in the alkyl chain. The fraction of the dye in the interior region is higher for short alkyl chains (C12>C14>C16>>C18C20) and in unsaturated lipids (C14:1>C14:0, C16:1>C16:0). These experimental results are consistent with the general principle that the penetration of an amphiphilic organic molecule in the interior region of the membrane is more when the structure of th bilayer is more fluid-like.

Carbocyanines↗
PubMed2004

Direct AFM observation of saposin C-induced membrane domains in lipid bilayers: from simple to complex lipid mixtures.

Saposin C (Sap C) is a small glycoprotein required by glucosylceramidase (GCase) for hydrolysis of glucosylceramide to ceramide and glucose in lysosomes. The molecular mechanism underlying Sap C stimulation of the enzyme activation is not fully understood. Here, atomic force microscopy (AFM) has been used to study Sap C-membrane interactions under physiological conditions. First, to establish how Sap C-membrane interactions affect membrane structure, lipid bilayers containing zwitterionic and anionic phospholipids were used. It was observed that Sap C induced two types of membrane restructuring effects, i.e., the formation of patch-like domains and membrane destabilization. Bilayers underwent extensive structural reorganization. To validate the biological importance of the membrane restructuring effects, interaction of Sap C with lipid bilayers composed of cholesterol, sphingomyelin, and zwitterionic and anionic phospholipids were studied. Although similar membrane restructuring effects were observed, Sap C-membrane interactions, in this case, were remarkably modulated and their effects were restricted to a limited area. As a result, nanometer-sized domains were formed. The establishment of a model membrane system will allow us to further study the dynamics, structure and mechanism of the Sap C-associated membrane domains and to examine the important role that these domains may play in enzyme activation.

Complex Mixtures↗
PubMed1976

Interaction of charged lipid vesicles with planar bilayer lipid membranes: detection by antibiotic membrane probes.

A technique has been developed for monitoring the interaction of charged phospholipid vesicles with planar bilayer lipid membranes (BLM) by use of the antibiotics Valinomycin, Nonactin, and Monazomycin as surface-charge probes. Anionic phosphatidylserine vesicles, when added to one aqueous compartment of a BLM, are shown to impart negative surface charge to zwitterionic phosphatidylcholine and phosphatidylethanolamine bilayers. The surface charge is distributed asymmetrically, mainly on the vesicular side of the BLM, and is not removed by exchange of the vesicular aqueous solution. Possible mechanisms for the vesicle-BLM interactions are discussed.

Anti-Bacterial Agents↗
PubMed1996

Simulation of voltage-dependent interactions of alpha-helical peptides with lipid bilayers.

Pore formation in lipid bilayers by channel-forming peptides and toxins is thought to follow voltage-dependent insertion of amphipathic alpha-helices into lipid bilayers. We have developed an approximate potential for use within the CHARMm molecular mechanics program which enables one to simulate voltage-dependent interaction of such helices with a lipid bilayer. Two classes of helical peptides which interact with lipid bilayers have been studied: (a) delta-toxin, a 26 residue channel-forming peptide from Staphylococcus aureus; and (b) synthetic peptides corresponding to the alpha 5 and alpha 7 helices of the pore-forming domain of Bacillus thuringiensis CryIIIA delta-endotoxin. Analysis of delta-toxin molecular dynamics (MD) simulations suggested that the presence of a transbilayer voltage stabilized the inserted location of delta-toxin helices, but did not cause insertion per se. A series of simulations for the alpha 5 and alpha 7 peptides revealed dynamic switching of the alpha 5 helix between a membrane-associated and a membrane-inserted state in response to a transbilayer voltage. In contrast the alpha 7 helix did not exhibit such switching but instead retained a membrane associated state. These results are in agreement with recent experimental studies of the interactions of synthetic alpha 5 and alpha 7 peptides with lipid bilayers.

Amino Acid Sequence↗
PubMed1984

Effect of hypoglycemic sulfonylureas on Ca2+ fluxes across lipid bilayers.

Black lipid membranes and liposomes loaded with Ca2+ or 5,6-carboxyfluorescein were used for exploring the mechanism of action of insulin-releasing sulfonylureas. Unlike the Ca2+/H+ exchanging ionophore A-23187, tolbutamide did not stimulate the net efflux of Ca2+ from the liposomes. Glibenclamide caused a sustained release of Ca2+, but this effect could be attributed to labilization of the liposomal membrane as indicated by a quantitatively similar loss of the stability marker 5,6-carboxyfluorescein. Unlike the neutral ionophore nonactin or the channel forming quasi-ionophore gramicidin A, the sulfonylureas did not alter the conductance of black lipid membranes in medium containing Na+, K+, Ca2+, Mg2+, and Cl-. It is concluded that the sulfonylureas tested lack ionophore properties but that glibenclamide can labilize membranes.

Biological Transport↗
PubMed1983

Lipid bilayer dynamics and rhodopsin-lipid interactions: new approach using high-resolution solid-state 13C NMR.

High-resolution, solid-state 13C NMR spectra have been obtained for unsonicated multilamellar dispersions of 1,2-dilauryl-sn-glycero-3-phosphocholine (DLPC), recombinant membranes containing DLPC and rhodopsin, and native retinal rod disk membranes. The roles of 1H dipolar decoupling, 1H-13C cross-polarization, and magic-angle sample spinning have been investigated. Rotating-frame 13C relaxation times have been measured and are discussed in terms of lipid bilayer dynamics and rhodopsin-lipid interactions.

Fatty Acids, Unsaturated↗
PubMed2004

Engineered lipids that cross-link the inner and outer leaflets of lipid bilayers.

The application of supported lipid bilayer systems as molecular sensors, diagnostic devices, and medical implants is limited by their lack of stability. In an effort to enhance the stability of supported lipid bilayers, three pairs of phosphatidylcholine lipids were designed to cross-link at the termini of their 2-position acyl chain upon the formation of lipid bilayers. The cross-linked lipids span the lipid bilayer, resembling naturally occurring bolaamphiphiles that stabilize archaebacterial membranes against high temperatures. The three reactions investigated here include the acyl chain cross-linking between thiol and bromine groups, thiol and acryloyl groups, and cyclopentadiene and acryloyl groups. All three reactive lipid pairs were found to cross-link in liposomal membranes, as determined by thin-layer chromatography, ion-spray mass spectrometry, and 1H NMR. The monolayer film properties of the reactive amphiphiles were characterized by surface pressure-area isotherms and showed that stable monolayers formed at the air-water interface with limiting molecular areas comparable to that of pure saturated phosphatidylcholine lipids. Langmuir-Blodgett bilayers of dimyristoylphosphatidylcholine incorporating 15 mol % of the reactive thiol and acryloyl lipids had diffusion coefficients comparable with pure dimyristoylphosphatidylcholine, while bilayers with more than 25 mol % of the reactive lipids were immobile, suggesting that interleaflet cross-linking of the lipids inhibited membrane diffusion. Our results show that the reactive lipids can cross-link within a lipid bilayer and are suitable for assembling supported lipid bilayers using Langmuir-Blodgett deposition. By using terminally reactive amphiphiles to build up supported lipid bilayers with cross-linked leaflets, bolaamphiphiles can be incorporated into asymmetric solid supported membranes to increase their stability in biosensor and medical implant applications.

Chemical Engineering↗
PubMed1986

Cell-mediated tumor-killing effect studied by using bilayer lipid membranes.

The bilayer lipid membrane (BLM) system was used to investigate the tumor killing effect of natural killer (NK) cells under various experimental conditions. It was found that NK cells interact specifically with BLMs made from lipids and proteolipids isolated from target K562 cells inducing an increase of the membrane conductance. This effect was more pronounced when the NK cells were pretreated with interferon. A similar effect was observed when NK cells were pretreated with sodium selenite. The results suggest that changes in membrane conductance and permeability are involved in the mechanism of the tumor-killing effect mediated by NK cells.

Cell Membrane↗
PubMedDate not supplied

A molecular toolkit for highly insulating tethered bilayer lipid membranes on various substrates.

Tethered bilayer lipid membranes (tBLMs) are promising model architectures that mimic the structure and function of natural biomembranes. They provide a fluid, stable, and electrically sealing platform for the study of membrane related processes, specifically, the function of incorporated membrane proteins. This paper presents a generic approach toward the synthesis of functional tBLMs adapted for application to various surfaces. The central element of a tethered membrane consists of a lipid bilayer. Its proximal layer is covalently attached via a spacer unit to a solid support, either gold or silicon oxide. The membranes are characterized optically by using surface plasmon resonance spectroscopy (SPR) or ellipsometry and electrically by using electrochemical impedance spectroscopy (EIS). The bilayer membranes obtained show high electrical barrier properties and can be used to incorporate and study small membrane proteins in a functional form.

Electrochemistry↗
PubMed1999

Cubic phases for studies of drug partition into lipid bilayers.

Drug partition into lipid bilayers in a cubic liquid-crystalline phase was investigated. Glyceryl monooleate was used to form the lipid bilayer in a reversed bicontinuous cubic liquid-crystalline phase. The reason for using the cubic phase is that it may coexist with an external aqueous phase, and that the phase boundary (cubic phase/aqueous bulk) is well-defined due to the stiffness of the cubic phase. This makes the cubic phase a potential candidate for high throughput screening (HTS) of the lipophilicity and the dissociation constant (if any) of drug compounds. Clomethiazole (CMZ), lidocaine, prilocaine and 4-phenylbutylamine (4-PBA) were chosen as model drug compounds. It was shown that it is possible to determine a pH-dependent apparent partition coefficient, Kbl/w, of a drug compound using a lipid bilayer expressed as a cubic liquid-crystalline structure. Good agreement was found when the resulting Kbl/w vs. pH curves for CMZ, lidocaine and prilocaine were fitted to a mathematical expression. This included the bilayer/water partition coefficient for the unionised and ionised drug respectively and the pKa of the drug. The effect of different experimental conditions; such as amount of cubic phase, temperature, agitation, sample preparation and interfacial area between the cubic phase and the aqueous bulk on the partition kinetics were investigated as well. The studies reveal that the time needed to reach partition equilibrium was, as expected, substantially reduced (from days to hours) by decreasing the amount of cubic phase, increasing the interfacial area between the cubic phase and the aqueous phase, and increasing the temperature and the agitation of the sample. It was also shown that the bilayer affinity of 4-PBA was increased when a zwitterionic lipid (i.e. dioleoyl phosphatidylcholine, DOPC) was incorporated in the bilayer.

Anesthetics, Local↗
PubMed2003

The dependence of Fluorescein-PE fluorescence intensity on lipid bilayer state. Evaluating the interaction between the probe and lipid molecules.

The degree of dependence of a lipid bilayer's surface properties on its conformational state is still an unresolved question. Surface properties are functions of molecular organization in the complex interfacial region. In the past, they were frequently measured using fluorescence spectroscopy. Since a fluorescent probe provides information on its local environment, there is a need to estimate the effect caused by the probe itself. In this paper, we address this question by calculating how lipid head-group orientation effects the fluorescence intensity of Fluorescein-PE (a probe that is sensitive to surface potential). In the theoretical model assumed the lipid bilayer state and the interactions between the charged fluorescent probe and the surrounding lipid molecules was evaluated. The results of this theoretical analysis were compared with experimentally obtained data. A lipid bilayer formed from DPPC was chosen as the experimental system, since it exhibits all the major conformational states within a narrow temperature range of 30 degrees C-45 degrees C. Fluorescein-PE fluorescence intensity depends on local pH, which in turn is sensitive to local electrostatic potential in the probe's vicinity. This local electrostatic potential is generated by lipid head-group dipole orientation. We have shown that the effect of the probe on lipid bilayer properties is limited when the lipid bilayer is in the gel phase, whereas it is more pronounced when the membrane is liquid-crystalline. This implies that Fluorescein-PE is a good reporter of local electrostatic fields when the lipid bilayer is in the gel phase, and is a poor reporter when the membrane is in the liquid-crystalline state.

Fluorescent Dyes↗