Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “GLASSES”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources
PubMed2000

In vitro bioactivity of glass and glass-ceramics of the 3CaO x P2O5-CaO x SiO2-CaO x MgO x 2SiO2 system.

A glass of nominal composition (wt%) 40.0 CaO-34.5 SiO2-16.5 P2O5-8.5 MgO-0.5 CaF2 has been obtained (G13). The glass showed in vitro bioactivity evidenced by the formation on its surface of a calcium phosphate-rich layer when soaked in a solution with ionic composition analogous to human plasma. By thermal treatments of G13, a glass-ceramic (GC13) containing apatite, diopside, althausite and akermanite as crystalline phases was developed. GC13 as-made did not show in vitro bioactivity. However, after chemical treatment of GC13 with 1 M HCl (GC13-HCl), the in vitro studies showed the formation of an apatite-like layer covering certain areas of the material surface. The influence of both chemical and morphological factors on the in vitro bioactivity has been studied.

Calcium Compounds↗
PubMed2002

Tradition and experiment in first millennium a.d. glass production--the emergence of early Islamic glass technology in late antiquity.

Following a brief history of analytical research into ancient glasses, the emergence of early Islamic glasses in the Middle East in late antiquity is discussed. Data sets for Roman and Byzantine glasses are compared to those of the early Islamic period. This is a rare period of technological transition when responses to the "drying up" of the traditional mineral alkali source resulted in experimentation, which can be demonstrated analytically.

Journal Article↗
PubMed2005

Microstructure of fragile metallic glasses inferred from ultrasound-accelerated crystallization in Pd-based metallic glasses.

By utilizing ultrasonic annealing at a temperature below (or near) the glass transition temperature Tg, we revealed a microstructural pattern of a partially crystallized Pd-based metallic glass with a high-resolution electron microscopy. On the basis of the observed microstructure, we inferred a plausible microstructural model of fragile metallic glasses composed of strongly bonded regions surrounded by weakly bonded regions (WBRs). The crystallization in WBRs at such a low temperature under the ultrasonic vibrations is caused by accumulation of atomic jumps associated with the beta relaxation being resonant with the ultrasonic strains. This microstructural model successfully illustrates a marked increase of elasticity after crystallization with a small density change and a correlation between the fragility of the liquid and the Poisson ratio of the solid.

Journal Article↗
PubMed2003

The effects of changes of intermolecular coupling on glass transition dynamics in polymer thin films and glass-formers confined in nanometer pores.

Intermolecular coupling plays an important role in determining the dynamics and the mobility of polymeric and non-polymeric glass-formers. The breadth of the dispersion is an indicator of the intermolecular coupling strength. The coupling model relates intermolecular coupling through the breadth of the dispersion to the dynamics of bulk glass-formers. When a glass-former is confined in nanometer pores or in thin films and if there is absence of chemical and physical interactions with the wall, intermolecular coupling is reduced, resulting in an increase of mobility. The coupling model is used to account for such changes of relaxation time of 1) ortho-terphenyl and poly(dimethyl siloxane) confined in nanometer pores, 2) polymer thin film confined between two impenetrable walls from Monte Carlo simulation, and 3) polymer film confined by perfectly smooth and purely repulsive potential acting on the repeat units from molecular-dynamics simulation. The model continues to explain the opposite effects observed when there is an increase of intermolecular coupling due to the presence of chemical or physical interaction with the walls.

Journal Article↗
PubMedDate not supplied

[Biomechanic and histomorphometric studies of HIP titanium glass ceramic, a new implant material, compared with glass ceramics, titanium and titanium alloy].

Interfacial tensile strength and quantitative histomorphological properties of alloplastic implant materials for hard tissue application were studied in animal models. Physico-chemical bonding in the order of 1 N/mm2 of bone to glass-ceramic (Ceravital) was demonstrated independent of magnitude of surface roughness with mineralized bone in excess of 80% at the implant interface. No bone-bonding, but contact of mineralized bone at the metal surface was observed in pure titanium and titanium alloys (Ti6Al4V, Ti5Al2, 5Fe) with smooth surfaces. Rough or porous surfaced specimens, however, exhibited mechanical interlocking and interdigitation, thus yielding interfacial tensile strength of up to 4 N/mm2 in geometrically porous or madreporic surfaces. The new composite material HIP-Titanium-glass-ceramic (Ceravital) displayed physico-chemical bonding to bone as well as mechanical interdigitation within the secondary porous structure, thus giving support to expectations that HIP-Titanium-glass-ceramic coated implants should perform superior than bulk materials.

Animals↗
PubMed2005

Compound changes and tooth mineralization effects of glass ionomer cements containing bioactive glass (S53P4), an in vivo study.

In this study, modifications of glass ionomer cements (GICs) were made by adding bioactive glass (BAG) to GIC to obtain bioactive restorative materials. This study used SEM, EDS and visual analysis to examine the bioactivity and the ability of the study materials to mineralize dentin. Conventional cure and resin-modified light-curing GIC were used. The materials consisted of powder and liquid. Three experimental materials were made by mixing 10-30 wt% of BAG powder with GIC powders. Commercially available GIC without BAG were used as controls. Class III restorations were made in altogether 62 intact beagle dog teeth, and the operation was performed under general anesthesia. The restorations were followed clinically for 1, 3 or 6 weeks. Resin-modified GIC containing BAG showed uniform CaP surface formation on the restorations. Mineral depositions in the close vicinity of the restoration-dentin interface and in deeper parts of dentin tubules were also noticed in resin-modified GIC containing BAG particles. It can be concluded that resin-modified GIC containing BAG have good potential in clinical applications where enhanced mineralization is expected.

Analysis of Variance↗
PubMed2003

Antimicrobial effects of glass ionomer cements containing bioactive glass (S53P4) on oral micro-organisms in vitro.

The antimicrobial effects of two glass-ionomer cements (GICs), GC Fuji II and Fuji II LC, mixed with different amounts (0 wt%, 10 wt% and 30 wt% of the total powder weight) of bioactive glass (BAG), S53P4, on Streptococcus mutans and Candida albicans were studied in vitro. The growth inhibition was tested using agar diffusion. The materials were also studied in a liquid media. The effect of the material extracts on acid production was studied using cell suspensions. The antimicrobial activity of the materials was examined by incubating the cell suspensions with the material powder. In the agar diffusion test, only the GICs containing 30 wt% BAG inhibited the growth of S. mutans. When the materials were tested in culture medium, no inhibitory effects on S. mutans were detected. The only materials to inhibit acid production of S. mutans were the GIC extracts without added BAG. Furthermore, they also had antibacterial activity against S. mutans when tested as powders. We found very few effects of the tested materials on C. albicans. The only material with an antimicrobial effect on C. albicans was BAG when incubated in a suspension with C. albicans. This is the first time that this effect has been demonstrated for C. albicans. By adding BAG to GICs the structure of the material becomes more brittle than the structure of GICs without BAG. Thus, in addition to the composition of the tested materials, their structure may also have influenced the results. In summary, commercially available GICs and GIC disks containing 30 wt% of BAG exerted antibacterial effects on S. mutans. BAG exerted antimicrobial effects on both S. mutans and C. albicans.

Acids↗
PubMed2001

Treatment of tooth fracture by medium-energy CO2 laser and DP-bioactive glass paste: the interaction of enamel and DP-bioactive glass paste during irradiation by CO2 laser.

Acute trauma or trauma associated with occlusal disturbance can produce tooth crack or fracture. Although several methods are proposed to treat the defect, however, the prognosis is generally poor. If the fusion of a tooth fracture by laser is possible, it will offer an alternative to extraction or at least serve as an adjunctive treatment in the reconstruction. We have tried to use a continuous-wave CO2 laser and a newly developed DP-bioactive glass paste (DPGP) to fuse or bridge tooth crack or fracture lines. Both the DP-bioactive glass paste and tooth enamel have strong absorption bands at the wavelength of 10.6 microm. Therefore, under CO2 laser, DPGP and enamel should have an effective absorption and melt together. The interface between DPGP and enamel could be regarded as a mixture of DPGP and enamel (DPG-E). The study focused on the phase transformation, microstructure, functional group and thermal behavior of DPG-E with or without CO2 laser irradiation, by the analytical techniques of XRD, FTIR, DTA/TGA, and SEM. The results of XRD showed that the main crystal phase in the DPG-E was dicalcium phosphate dihydrate (CaHPO4.2H2O). It changed into CaHPO4, gamma-Ca2P2O7, beta-Ca2P2O7 and finally alpha-Ca2P2O7 with increasing temperature. In the FTIR analysis, the 720 cm(-1) absorption band ascribed to the P-O-P linkage in pyrophosphate rose up and the intensities of the OH- bands reduced after laser irradiation. In regard to the results of DTA/TGA after irradiation, the weight loss decreased due to the removal of part of absorption water and crystallization water by the CO2 laser. SEM micrographs revealed that the melted masses and the plate-like crystals formed a tight chemical bond between the enamel and DPGP. We expect that DPGP with the help of CO2 laser can be an alternative to the treatment of tooth crack or fracture.

Carbon Dioxide↗
PubMed2004

Phosphate glasses for tissue engineering: Part 1. Processing and characterisation of a ternary-based P2O5-CaO-Na2O glass system.

This paper presents the results of a study of the thermal properties, X-ray powder diffraction (XRPD), NMR and solubility of a range of phosphate-based glasses. Ion release and pH measurements were also obtained. The compositions were limited by fixing the P2O5 mol% content at 45, 50 and 55 mol%, and varying the CaO mol% at 30, 35 and 40 mol%. Initial data collected from thermal analysis showed an increase in the Tg values, with increasing CaO mol%, as expected. An increase in crystallisation temperatures with increasing CaO mol% was also observed, with sharp peaks indicating the presence of single and/or double phases. Initial XRPD data revealed that the 45 mol% P2O5 precipitated a calcium bridged trimetaphosphate (Na4Ca[PO3]6) at the sodium oxide contents of 25 and 20 mol%, but at the 15 mol% level two phases formed, NaCa[PO3]3 and Ca2P2O7. The 50 mol% P2O5 compositions showed two sodium phosphate-rich phases [NaCa(PO3)3 and NaPO3] for the lower calcium containing compositions, and a calcium phosphate phase [CaP2O6] for compositions with higher CaO mol%. The 55 mol% P2O5 compositions, exhibited similar phases for the lower calcium containing compositions, and a single calcium phosphate phase (CaP2O6) was identified for the higher calcium containing composition. NMR analysis revealed the presence of Q1 and Q2 species in the 45 mol% P2O5 compositions, and Q2 species present in the 50 and 55 mol% P2O5 compositions. The non-linear data obtained from the thermal and solubility analyses conducted were attributed to the packing density of the 45 mol% P2O5 compositions. The solubility was seen to decrease with increasing CaO mol%, for all the glasses investigated, and all the compositions showed a gradual decrease in pH with time, and this was accounted for by the release of Na+ and Ca2+ ions into solution.

Biocompatible Materials↗
PubMed2004

Phosphate glasses for tissue engineering: Part 2. Processing and characterisation of a ternary-based P2O5-CaO-Na2O glass fibre system.

This paper presents the results of a study of the thermal properties, solubility and dimensions of a range of phosphate-based glass fibres (PB-GFs). The glass compositions were limited by fixing the P2O5 content to 45, 50 and 55 mol%, and varying the CaO mol% at 30, 35 and 40. PB-GFs were obtained from the 50 and 55 mol% P2O5 compositions; however, we were unable to obtain fibres from the 45 mol% compositions. This was linked to the cross-linked density, network connectivity and average chain length of the compositions studied. With regards to thermal parameters investigated, initial data showed an increase of the Tg and crystallisation temperatures with increasing CaO mol% at each fixed phosphate content. A decrease in Tg temperatures was also observed with increasing P2O5 content to 55 mol%. The crystallisation temperatures obtained for compositions with fixed phosphate at 55 mol%, showed a reverse pattern, with a decrease in values as compared to the fixed 50 mol% phosphate compositions. The diameters of the fibres all decreased with increasing RPMs as expected, and the solubility also increased with increasing RPMs. This was related to the increased surface area of the higher RPM fibres. There was also a decrease seen in solubility with increasing CaO mol%.

Biocompatible Materials↗
PubMed2006

Spin glasses and fragile glasses: statics, dynamics, and complexity.

In this paper I will briefly review some theoretical results that have been obtained in recent years for spin glasses and fragile glasses. I will concentrate my attention on the predictions coming from the so called broken replica symmetry approach and on their experimental verifications. I will also mention the relevance or these results for other fields, and in general for complex systems.

Chemistry, Physical↗
PubMed2001

Glass vials for small volume parenterals: influence of drug and manufacturing processes on glass delamination.

PURPOSE: Studies were initiated to examine the effect of formulation and process variables on the delamination process and also the influence of the glass manufacturing process, supplier, and glass surface treatment. METHODS: Stress testing was performed by exposing filled vials to multiple sterilization cycles followed by accelerated stability testing. Delamination incidence was determined by visual examination, light obscuration (HIAC), and microscopical methods. The inner surface of vials from each supplier and lot were also examined by scanning electron microscopy. RESULTS: Vials sourced from Supplier A had smooth surfaces as demonstrated by SEM examination, whereas vials sourced from Suppliers B and C displayed extensive surface imperfections such as pitting and/or deposits. These imperfections were localized to the vial wall, adjacent to the vial bottom, and increased with sulfate treatment. Delamination incidence increased in those vial lots with increased surface imperfections. Thus, vials sourced from Supplier A had the lowest frequency of delamination. Sulfate treatment and high pH increased delamination incidence to as high as 100%. CONCLUSION: These results demonstrate the importance of the surface morphology created during the vial forming process. Given the diferences observed, final vial selection should include extensive microscopical and product stress testing studies on multiple vial lots.

Antineoplastic Agents↗
PubMedDate not supplied

Advances in the use of glass-ionomeric cement. Part 2: Functional results of fine application of low-viscosity glass-ionomeric cement: animal experimental results.

An experimentally developed technique for microapplication of low-viscosity glass-ionomeric cement (see part 1) was tested in animals over a 6-month period. The cement was used to firmly connect gold with titanium and gold with middle ear ossicles in 22 adult foxhounds. After a 6-month period of acoustic stimulation via parts of an implantable hearing aid, the finely applied glass-ionomeric cement was integrated in situ, stable and caused no adverse reactions. The microapplication technique used proved to be easy, effective and provided long-term stability.

Aluminum Silicates↗
PubMed1993

Errors introduced in radioligand binding studies due to displaceable, cation dependent, [3H]prazosin binding to glass-fibre filters and glass surfaces.

[3H]prazosin not only specifically and homogeneously labels alpha 1-adrenoceptors, but also binds to glass surfaces and non-linearly to the glass-fibre filters, commonly used in radioligand binding experiments. Binding to filters can be modulated by unlabeled alpha-adrenergic compounds and cations. If no correction is applied for displaceable filter binding, analysis of [3H]prazosin binding experiments leads to erroneous results. Analysis of [3H]prazosin saturation experiments on guinea-pig cerebral cortex membranes with correction for filter binding before the non-linear fit procedure indicated that [3H]prazosin labels a homogeneous population of alpha 1-adrenoceptors (Rtot: 8.33 fmol.mg-1 wet tissue) with a dissociation constant of 1.28 x 10(-10) M. However, analysis of the same data after correction for non-specific binding, (determined in parallel experiments by adding 10 microM phentolamine to the incubation medium) resulted in a best fit to a model in which [3H]prazosin labels two alpha 1-adrenoceptor subpopulations (R1: 15.0 fmol.mg-1 and R2: 14.6 fmol.mg-1 wet tissue) with dissociation constants of respectively 1.78 x 10(-10) and 5.63 x 10(-9) M. The discrepancy between the two methods of analysis is due to displacement of the radioligand from the filters by phentolamine. Prazosin and oxymetazoline are also able to displace filter-bound [3H]prazosin. The extent to which displaceable filter binding distorts the proper results depends on the actual magnitude of the error and also on the method of analysis.

Animals↗
PubMedDate not supplied

Antibacterial activity of resin adhesives, glass ionomer and resin-modified glass ionomer cements and a compomer in contact with dentin caries samples.

A total of 103 clinical samples of carious dentin were used to study the antibacterial action of different dental resin adhesive materials (Gluma 2000, Syntac, Prisma Universal Bond 3, Scotchbond Multi-Purpose and Prime&Bond 2.0) glass ionomer cements (Ketac-Cem, Ketac-Bond, Ketac-Silver, Ketac-Fil) resin-modified glass ionomer cements (Fuji II LC, Vitremer and Vitrebond) and a compomer (Dyract). The agar plate diffusion method was used for the microbial cultures and a chlorhexidine control. The growth of the caries-producing microorganisms was effectively inhibited by the Vitremer and Vitrebond cements, and to a lesser extent by the Scotchbond Multi-Purpose adhesive system. Overall, there were statistically significant differences in the antibacterial activity of the products tested.

Anti-Bacterial Agents↗
PubMed2006

Evaluation of stainless steel crowns cemented with glass-ionomer and resin-modified glass-ionomer luting cements.

PURPOSE: To evaluate in vitro and in vivo conditions of stainless steel crowns (SSC) cemented using one luting glass-ionomer cement (Aqua Meron) and one luting resin-modified glass-ionomer cement (Vitremer). METHODS: In the in vitro part of this study, retentive properties of SSCs cemented using Aqua Meron and Vitremer on extracted primary first molars were tested. In addition, two specimens of each group were used to evaluate the tooth hard tissue-cement, within the cement itself, cement-SSC, and tooth hard tissue-cement-SSC under scanning electron microscope (SEM). In the in vivo part of this study, 152 SSCs were placed on the first or second primary molars of 86 children, and cemented using either Aqua Meron or Vitremer. The crowns were examined for retention. In addition, the clinical views of the crowns were recorded with an intraoral camera. RESULTS: No significant difference was found between the mean retentive forces of Aqua Meron and Vitremer (P> 0.05). SSCs cemented with Aqua Meron and Vitremer had an average lifespan of 26.44 and 24.07 months respectively. Only one (0.66%) of 152 SSCs was lost from the Aqua Meron group during post-cementation periods. Nineteen of the 152 SSCs (12.5%) had dents or perforations.

Cementation↗
PubMed1989

Glass ionomers and discoloration: a comparative study of the effects of tea and coffee on three brands of glass ionomer dental cement.

This study was undertaken to compare the in vitro discoloration of 3 brands of glass ionomer dental cement, Chemfil, Fuji Type II, and Ketac-Fil. Forty-eight specimens of each brand were prepared. Sixteen specimens of each brand were placed in tea, coffee and, as a control, water. Discoloration was evaluated by means of reflection spectrophotometry at 2, 4, 8, and 16 wk. Analysis of the data indicated that most discoloration occurred during the first 2 wk of immersion in the staining media and a little further discoloration took place between 2 and 16 wk (p less than 0.05). Tea discoloured glass ionomer more than did coffee (p less than 0.05) and Fuji Type II discoloured the most, Ketac-Fil the least whilst the discoloration of Chemfil lay between these two (p less than 0.05).

Coffee↗
PubMed1980

[Use of the effect of impaired complete internal reflection for studying the adhesion of animal cells to glass. II. Kinetics of flattening of the cell surface facing the glass].

The kinetics of form change (flattening) of Chinese hamster fibroblast cell surface facing the glass has been studied during attachment of fibroblasts to the glass using the effect of frustrated total reflection. Two stages of the process were shown to exist. The first one is characterized by a rapid (5 min) partial flattening and requires no serum in the medium. The second stage occurs only in the presence of serum in the medium, it lasts no longer than one hour and ends in a complete flattening. After the second stage is completed, spreaded cells appear.

Animals↗