Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Cheese”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources
PubMed2006

Effect of cheese water activity and carbohydrate content on the barotolerance of Listeria monocytogenes scott A.

High-pressure processing is an appropriate technique for improving the microbiological safety of packaged ready-to-eat foods. The effect of high-pressure treatment on Listeria monocytogenes Scott A inoculated into fresh Hispánico-type cheese and ripe Mahón cheese was investigated. A 3.8-log reduction in the counts of L. monocytogenes Scott A in fresh cheese was recorded after 3 min at 400 MPa and 12 degrees C, whereas 18 min under the same conditions was required to obtain a 1-log reduction in ripe cheese. Dry matter values were 48.96% for fresh cheese and 58.79% for ripe cheese, and water activity (aw) values were 0.983 and 0.922, respectively. In dehydrated fresh cheese (58.20% dry matter) in which 5% NaCl was added to achieve a 0.904 aw value, L. monocytogenes Scott A counts were lowered by only 0.4 log after treatment for 10 min at 400 MPa. On the other hand, in a 60:40 mixture of ripe cheese:distilled water with a 0.976 aw value, the reduction under the same conditions was 3.9 log. Within the aw range of 0.945 to 0.965, L. monocytogenes Scott A barotolerance was significantly higher in fresh cheese than in ripe cheese for equivalent aw values. Carbohydrate content was higher in fresh cheese than in ripe cheese. The addition of lactose at a concentration of 5 mg/g to an 85:15 mixture of ripe cheese:distilled water did not influence L. monocytogenes Scott A barotolerance during treatment for 10 min at 400 MPa. Galactose at a concentration of 5 mg/g had a protective effect during high-pressure treatment, and glucose at a concentration of 5 mg/g favored L. monocytogenes Scott A survival during refrigerated storage of pressurized samples at 8 degrees C for 5 days.

Carbohydrate Metabolism↗
PubMed2006

Comparison of media and sampling locations for isolation of Listeria monocytogenes in queso fresco cheese.

Listeriosis associated with Hispanic-style soft cheese is an ongoing public health concern. Although rapid detection methods based on molecular and immunological technologies have been applied successfully for detecting Listeria monocytogenes in foods, obtaining isolates of the pathogen is a critical procedure for epidemiologic studies and regulatory analysis. Oxford agar, a medium recommended by the U.S. Food and Drug Administration Bacteriological Analytical Manual (BAM) to isolate L. monocytogenes from cheese, is unable to differentiate L. monocytogenes from other Listeria species. Hence, two selective isolation media, L. monocytogenes blood agar (LMBA) and Rapid 'L. mono agar (RLMA), were compared with Oxford agar for isolating L. monocytogenes from cheese. Queso fresco cheese was inoculated at 10(0) or 10(1) CFU/g with a five-strain mixture of L. monocytogenes or with the five-strain L. monocytogenes mixture and Listeria innocua. Cheese samples were stored at 21, 12, and 4 degrees C and Listeria counts were determined at 3, 7, and 10 days; 7, 10, 14, 21 days; and 2, 4, 8, and 12 weeks postinoculation, respectively. Surface and interior cheese samples as well as liquid exudate produced during storage were assayed individually to determine differences in Listeria contamination at different sampling locations. L. monocytogenes was more easily differentiated from L. innocua on RLMA than LMBA and Oxford agar. Similar L. monocytogenes counts (ca. 10(4) CFU/g) were obtained on the last sampling day on the surface and interior of cheese samples (P > 0.05) for all storage temperatures and both initial inoculation levels, but smaller cell numbers were detected in the exudate produced during storage. In addition, simultaneous inoculation of L. innocua with L. monocytogenes did not affect the final L. monocytogenes counts in the cheese. The amount of exudate released from the cheese and decrease of pH correlated with storage temperature. More exudate was produced and a greater decrease of pH occurred at 21 degrees C than at 12 or 4 degrees C. Our results indicate that RLMA is a suitable medium for isolating L. monocytogenes from queso fresco cheese. Higher counts of L. monocytogenes were obtained from surface and interior samples of cheese than from the exudate of the cheese during storage. In addition, pH may be a useful indicator of improperly stored queso fresco cheese.

Cheese↗
PubMed1996

Prolongation of the keeping quality of Mozzarella cheese by treatment with sorbate.

An attempt was carried out for prolongation of the shelf-life of Mozzarella cheese by incorporation of potassium sorbate into the cheese. Three manufacturing techniques were used: a) addition of potassium sorbate to kneading water (at level of 6%), b) addition during brine salting (at level of 0.5%) and c) dipping the cheese into potassium sorbate solution (6%) directly prior to packaging. Control cheese was made without potassium sorbate treatment. The resulting cheeses were divided into two portions, one of which was contaminated with Penicillium roqueforti and then packaged, while the second one was packaged without contamination. Both were stored at refrigerator (5 +/- 1 degree C) temperature and analysed periodically until spoilage. The results showed that treatment with potassium sorbate did not affect the organoleptic properties of the cheeses, except that a slight objectionable bitter flavour was observed in fresh cheeses treated with sorbate using the techniques of dipping or in brine salting then it was disappeared during storage. However, the overall acceptabilities of the sorbate-treated cheese were increased up to 10 weeks of storage compared with 4 weeks for untreated cheeses. Treatment with potassium sorbate in kneading water or brine appeared to be more effective than dipping. Addition of potassium sorbate inhibited microbial growth, especially that of moulds and yeasts. The sorbate-treated cheeses had higher moisture, pH values and lower acidity than the control. Fat, salt and total nitrogen were unaffected during storage. Levels of soluble N, non-protein N and total volatile fatty acids in sorbate-treated cheeses were slightly higher than in the control. Furthermore, addition of potassium sorbate increased the meltability and improved the fat leakage of Mozzarella cheese.

Animals↗
PubMed2006

Contribution of C. beijerinckii and C. sporogenes in association with C. tyrobutyricum to the butyric fermentation in Emmental type cheese.

The relationship between C. tyrobutyricum, C. sporogenes and C. beijerinckii in experimental cheese conditions, and their influences on late-blowing and butyric fermentation, have been investigated. A molecular approach using a PCR-TTGE method in combination with conventional methods, such as microbiological and physico-chemical analysis, was performed to monitor the evolution of these clostridial species, simultaneously with the occurrence of cheese defects. Sixteen Emmental type cheeses were produced from milk inoculated with different clostridial spore associations. In all cheeses inoculated with C. tyrobutyricum, obvious signs of late blowing were detected. In cheeses inoculated with C. beijerinckii or C. sporogenes, a formation of holes in cheese body was observed, with a concomitant slight amount of butyric acid production. Even though C. beijerinckii and C. sporogenes were less metabolically active and less numerically important than C. tyrobutyricum in cheese as shown by TTGE profiles, the association of these species to C. tyrobutyricum enhanced the butyric fermentation and the cheese defects. The level of butyric content in ripened cheese increased to 268 mg 100 g(-1) in presence of C. tyrobutyricum, and reached a maximum of 414 mg 100 g(-1) in presence of the C. beijerinckii-C. tyrobutyricum (1:10) association. The propionic fermentation was also higher in cheese inoculated with C. tyrobutyricum, and was slowed down in presence of C. beijerinckii and C. sporogenes. From 30 days of ripening, a strong correlation between the chemical contents and the intensity of cheese defects was demonstrated. A chemical analysis of cheese associated with a molecular method for microbial spoilage investigation allows the prediction of the level of late blowing at early stages of ripening, and the understanding of the origin of the defect.

Butyric Acid↗
PubMed2001

High incidence of Listeria monocytogenes in European red smear cheese.

The incidence of Listeria and Listeria monocytogenes in European red smear cheese was determined in order to assess whether the lack of recent outbreaks of listeriosis associated with cheese is due to improved hygenic conditions in the dairies. Out of European red-smear cheese samples of various types, 15.8% contained organisms of the genus Listeria, 6.4% of the samples were contaminated with L. monocytogenes, 10.6% with L. innocua, and 1.2% with L. seeligeri. Six cheese samples contained two or more Listeria species, including at least one L. monocytogenes isolate. The incidences of L. monocytogenes in cheeses from various countries were: Italy 17.4%, Germany 9.2%, Austria 10%, and France 3.3%. Listeria were found most frequently in soft and semi-soft cheese. Eight samples contained more than 100 L. monocytogenes cfu/cm2 cheese surface, 2 samples had counts above 10(4) cfu/cm2 cheese surface. Surprisingly, a higher incidence of L. monocytogenes was observed in cheeses made from pasteurized milk (8.0%) than in cheeses manufactured from raw milk (4.8%). Phage-typing of isolated Listeria strains clearly confirmed that (i) contaminations within dairy plants were persistent over a period of several weeks to months and (ii) that cross-contamination within the dairy plant is and important factor. Comparison of our data with past surveys seems to indicate that contamination of red smear soft cheese with L. monocytogenes has not decreased sufficiently over the past 15 years. It is therefore strongly recommended that these products are monitored carefully by cheese-making companies.

Animals↗
PubMed2003

Inhibition of Clostridium tyrobutyricum in Vidiago cheese by Lactococcus lactis ssp. lactis IPLA 729, a nisin Z producer.

Lactococcus lactis ssp. lactis IPLA 729 is a nisin Z producer isolated from raw milk cheese able to grow and produce nisin Z in milk. The ability of this strain to inhibit the growth of Clostridium tyrobutyricum CECT 4011, a late blowing agent, in Vidiago cheese, a semi-hard farmhouse variety, manufactured in Asturias, Northern Spain, was investigated. For control purposes, cheeses were manufactured with the mesophilic mixed starter IPLA-001. In experimental cheeses, the nisin-producing strain L. lactis IPLA 729 was combined with this starter. Nisin Z activity reached a concentration of 1600 AU/ml in 1-day cheeses and this level was maintained until 15 days of ripening. Furthermore, to compare the inhibitory activity of the nisin-producing strain to nitrate, cheeses were also manufactured with a commercial starter culture and potassium nitrate as anti-blowing agent was added in accordance with Vidiago's cheesemakers. The control, experimental and commercial cheeses were contaminated with C. tyrobutyricum CECT 4011. The composition of the three different cheeses showed only slight differences with respect to total solids, protein and fat, although control and experimental cheeses showed a richer flavour-compound profile than commercial cheeses. The level of the spoilage strain C. tyrobutyricum CECT 4011 decreased from 1.2x10(6) to 1.3x10(3) cfu/g during ripening in presence of the nisin Z producer, while it increased to 1.99x10(9) cfu/g in control cheeses and to 3.5x10(7) cfu/g in commercial cheeses.

Cheese↗
PubMed1992

New type of Domiati cheese of potential benefit to people with high blood cholesterol.

Part of the milk used for manufacturing Domiati cheese was replaced by buttermilk at rates of 0, 20, 30, 40, 50 and 60%. The fat and SNF contents were standardized at 5 and 10% respectively. The hypocholesterolaemic effect of buttermilk when incorporated into cheese was tested with rats by including cheese manufactured with and without buttermilk mixed in their diet at a rate of 30% for a period of 60 d. When the diet containing Domiati cheese free from buttermilk (control cheese) was given to rats, there were highly significant increases in serum and liver cholesterol. However, when part of the milk used in manufacturing Domiati cheese was replaced by buttermilk the increases in serum and liver cholesterol concentrations were reduced. These reductions were proportional to the proportion of buttermilk incorporated in the milk used to manufacture the cheese. When 50% of the milk used for Domiati cheese was replaced by buttermilk the hypercholesterolaemic effect of Domiati cheese was nullified and the serum and liver cholesterol concentrations were restored to their normal values. The effect of replacing 50% of the milk used in the manufacture of Domiati cheese by buttermilk on the quality of the cheese was tested periodically during the ripening period. The buttermilk improved the flavour of the cheese whilst only slightly affecting its ripening.

Animals↗
PubMed2002

Thermal inactivation of chymosin during cheese manufacture.

The aspartic proteinase, chymosin (EC 3.4.23.4) is the principal milk clotting enzyme used in cheese production and is one of the principal proteolytic agents involved in cheese ripening. Varietal differences in chymosin activity, due to factors such as cheese cooking temperature, fundamentally influence cheese characteristics. Furthermore, much chymosin is lost in whey, and further processing of this by-product may require efficient inactivation of this enzyme, with minimal effects on whey proteins. In the first part of this study, the thermal inactivation kinetics of Maxiren 15 (a recombinant chymosin preparation) were studied in skim milk ultrafiltration permeate, whole milk whey and skim milk whey. Inactivation of chymosin in these systems (at pH 6.64) followed first order kinetics with a D45.5 value of 100 +/- 21 min and a z-value of 5.9 +/- 0.3 degrees C. D-Values increased linearly with decreasing pH from 6.64 to 6.2, while z-values decreased as pH decreased from 6.64 to 6.4, but were similar at pH 6.4 and 6.2. Subsequent determination of chymosin activity during manufacture of Cheddar and Swiss-type cheese showed good correlations between predicted and experimental values for thermal inactivation of chymosin in whey. However, both types of cheese curd exhibited relatively constant residual chymosin activity throughout manufacture, despite the higher cooking temperature applied in the manufacture of Swiss cheese. Electrophoretic analysis of slurries made from Cheddar and Swiss cheese indicated decreased proteolysis due to chymosin activity during storage of the Swiss cheese slurry, but hydrolysis of sodium caseinate by coagulant extracted from both cheese types indicated similar levels of residual chymosin activity. This may suggest that some form of conformational change other than irreversible thermal denaturation of chymisin takes place in cheese curd during cooking, or that some other physico-chemical difference between Swiss and Cheddar cheese controls the activity of chymosin during ripening.

Animals↗
PubMed2003

Free oil and rheology of Cheddar cheese containing fat globules stabilized with different proteins.

Cheddar cheese was manufactured from recombined milk containing fat globules coated with alpha(s1)-CN (casein), alpha(s2)-CN, beta-CN, kappa-CN, alpha-lactalbumin, or beta-lactoglobulin. The effect of the coating on fat globule structure, free oil formation, and cheese rheology was investigated to determine if globule coating affected the physical structure of cheese. Fat globule size and shape were determined in cheese using confocal laser scanning microscopy, and the rheological properties measured by uniaxial compression after maturation for 35 and 70 d. Fat globules were elongated and clustered in the control cheese coated with native membrane material and in cheese where the globules were coated with alpha(s2)-CN, but were more circular and distinct than all others. Cheese containing globules coated with alpha(s2)-CN fractured at a lower strain and with a lower stress than other experimental cheeses. Free oil decreased in cheese as the stress at fracture of the cheese protein matrix increased. Strain at fracture increased as pH increased from 4.7 to 5.3. There was no correlation between free oil and fat globule circularity. Cheddar cheese aroma was not evident in experimental cheeses.

Animals↗
PubMed2003

Understanding the role of calcium in functionality of part skim Mozzarella cheese.

The impact of calcium on softening, melting, and flow characteristics of part skim Mozzarella cheese was evaluated. Four cheeses containing different calcium levels (viz. 0.65, 0.48, 0.42, and 0.35%) were manufactured by direct acidification using glucono-delta-lactone on four different occasions. Preacidification of milk was done to alter the calcium content of the cheeses. Cheeses were made with uniform composition. Lowering of calcium to 25, 35, and 45% levels increased the melt by 1.4, 2.1, and 2.6 times, respectively, 1 d after manufacture. Low calcium cheeses softened and melted at lower time and temperatures. These cheeses flowed faster and to a greater extent. Higher proteolysis at a faster rate was observed in low calcium cheeses. Refrigerated storage up to 30 d also increased melt area, flow rate, extent of flow, and soluble protein and lowered softening and melting times in all the cheeses. The effect of calcium reduction was more noticeable as compared to the effect of storage on functionality of Mozzarella cheese. Improved softening, melting, and flow properties of low calcium part skim Mozzarella cheese is a clear advantage to cheese manufacturers and end users as they may not have to wait 15 to 20 d for proteolysis of cheese to obtain desired melt properties.

Calcium↗
PubMed2003

Proteolysis on Reggianito Argentino cheeses manufactured with natural whey cultures and selected strains of Lactobacillus helveticus.

Reggianito Argentino cheese is traditionally manufactured with whey starter cultures that provide typical and intense flavor but can cause poor quality standardization. In this study, the influence of natural and selected starters on Reggianito Argentino cheese proteolysis was investigated. Cheeses were manufactured with three strains of Lactobacillus helveticus (SF133, SF138 and SF209) cultured individually in sterile whey and used as single or mixed starters. Control cheeses were made with natural whey starter culture. Cheeses were analyzed to determine gross composition, as well as total thermophilic lactic flora. Proteolysis was assessed by N fractions, electrophoresis and liquid chromatography. Gross composition of the cheeses did not significantly differ, while viable starter cell counts were lower for cheeses made with strain SF209 alone or combined with other strains. Soluble N at pH 4.6 was the same for cheeses made with natural or selected starters, but soluble N in 12% trichloroacetic acid and 2.5% phosphotungstic acid was significantly higher in cheeses made with starters containing strain SF209. Nitrogen fractions results indicated that natural whey starter cultures could be replaced by several starters composed of the selected strains without significant changes to proteolysis patterns. Starter cultures prepared only with SF209 or with the three selected L. helveticus strains produced cheese products with significantly more proteolysis than control cheeses. Chromatographic profiles analyzed by principal components showed that three main peaks on chromatograms, presumptively identified as Tyr, Phe, and Trp, explained most of variability. Principal component scores indicated that cheese samples were grouped by ripening time, which was confirmed by linear discriminant analysis. On the contrary, samples did not cluster by Lactobacillus strain or type of starter.

Amino Acids↗
PubMed2004

Characterization of nutty flavor in cheddar cheese.

The objectives of this study were to determine the volatile components responsible for the sensory perception of nutty flavor in Cheddar cheese. Cheddar cheeses with and without nutty flavors were selected by descriptive sensory analysis. Volatile aroma components from Cheddar cheeses with and without nutty flavors were isolated and characterized using solvent extraction with high vacuum distillation, dynamic headspace analysis, gas chromatography-olfactometry, and gas chromatography-mass spectrometry. More than 50 aroma-active compounds were detected in Cheddar cheeses. Consistent differences were observed between nutty and not nutty Cheddar cheeses. Strecker aldehydes were detected in higher amounts in Cheddar cheeses with nutty flavors compared with Cheddar cheeses without nutty flavors. Strecker aldehydes, dimethyl sulfide, and propionic acid were evaluated in young and aged Cheddar cheese models for nutty flavor by descriptive sensory analysis. Dimethyl sulfide and propionic acid did not contribute to nutty flavor in Cheddar cheese. The addition of Strecker aldehydes to young (<4 mo old) Cheddar cheese models resulted in nutty/malty flavor perceived by sensory analysis. When Strecker aldehydes were incorporated into aged (>9 mo old) Cheddar cheese models, nutty flavor perception increased. Strecker aldehydes contribute to nutty flavor in aged Cheddar cheese.

Aldehydes↗
PubMed2004

Preference mapping of Cheddar cheese with varying maturity levels.

The objective of this study was to evaluate the flavor profile and acceptability of 7 Cheddar cheeses of varying maturity using descriptive analysis and consumer acceptance tests. Cheddar cheeses (n = 7) ranging in age from 1 to 19 mo were selected based on age, geographic region, and flavor profile. Descriptive sensory profiles of selected cheeses were determined using a trained panel (n = 14) and an established cheese flavor sensory language. Cheeses were evaluated for consumer acceptability in two demographic locations: North Carolina and Oregon. Consumers (n = 100 at each location) assessed the cheeses for overall liking and other consumer attributes. Cheddar cheeses demonstrated distinct differences in descriptive sensory profiles. Average consumer responses between the two locations were not different. Six distinct consumer clusters were identified, and the number of consumers in these clusters differed between the two locations. Consumers differentiated "young" and "aged" cheese flavor, but both young and mature cheeses were perceived by consumers as exhibiting intense Cheddar cheese flavors. Cheddar cheese acceptance varies widely among consumers and is related to consumer preferences for distinct cheese flavor profiles.

Cheese↗
PubMed2004

Impact of milk preacidification with CO2 on cheddar cheese composition and yield.

Preacidification of milk for cheese making may have a beneficial impact on increasing proteolysis during cheese aging. Unlike other acids, CO(2) can easily be removed from whey. The objectives of this work were to determine the effect of milk preacidification on Cheddar cheese composition, the recovery of individual milk components, and yield. Carbon dioxide was injected inline after the cooling section of the pasteurizer. Cheeses with and without added CO(2) were made simultaneously from the same batch of milk. This procedure was replicated 3 times. Carbon dioxide in the cheese milk was about 1600 ppm, which resulted in a milk pH of about 5.9 at 31 degrees C. The starter culture and coagulant addition rates were the same for both the CO(2) treatment and the control. The whey pH at draining of the CO(2) treatment was lower than the control. Total make time was shorter for the CO(2) treatment compared with the control. Cheese manufactured from milk acidified with CO(2) retained less of the total calcium and fat than the control cheese. The higher fat loss was primarily in the whey at draining. Preacidification with CO(2) did not alter the crude protein recovery in the cheese. The CO(2) treatment resulted in a higher added salt recovery in the cheese and produced a cheese that contained too much salt. Considering the higher added salt retention, the salt application rate could be lowered to achieve a typical cheese salt content. Cheese yield efficiency of the CO(2) treated milk was 4.4% lower than the control due to fat loss. Future work will focus on modifying the make procedure to achieve a normal fat loss into the whey when CO(2) is added to milk.

Animals↗
PubMed2005

Chymosin-mediated proteolysis, calcium solubilization, and texture development during the ripening of cheddar cheese.

Full fat, milled-curd Cheddar cheeses (2 kg) were manufactured with 0.0 (control), 0.1, 1.0, or 10.0 micromol of pepstatin (a potent competitive inhibitor of chymosin) added per liter of curds/whey mixture at the start of cooking to obtain residual chymosin levels that were 100, 89, 55, and 16% of the activity in the control cheese, respectively. The cheeses were ripened at 8 degrees C for 180 d. There were no significant differences in the pH values of the cheeses; however, the moisture content of the cheeses decreased with increasing level of pepstatin addition. The levels of pH 4.6-soluble nitrogen in the 3 cheeses with added pepstatin were significantly lower than that of the control cheese at 1 d and throughout ripening. Densitometric analysis of urea-PAGE electro-phoretograms of the pH 4.6-insoluble fractions of the cheese made with 10.0 micromol/L of pepstatin showed complete inhibition of hydrolysis of alpha(S1)-casein (CN) at Phe23-Phe24 at all stages of ripening. The level of insoluble calcium in each of 4 cheeses decreased significantly during the first 21 d of ripening, irrespective of the level of pepstatin addition. Concurrently, there was a significant reduction in hardness in each of the 4 cheeses during the first 21 d of ripening. The softening of texture was more highly correlated with the level of insoluble calcium than with the level of intact alpha(S1)-CN in each of the 4 cheeses early in ripening. It is concluded that hydrolysis of alpha(S1)-CN at Phe23-Phe24 is not a prerequisite for softening of Cheddar cheese during the early stages of ripening. We propose that this softening of texture is principally due to the partial solubilization of colloidal calcium phosphate associated with the para-CN matrix of the curd.

Calcium↗
PubMed2005

Development and application of image analysis to quantify calcium lactate crystals on the surface of smoked Cheddar cheese.

Calcium lactate crystals that form white specks or haze on the surface of cheese constitute a significant quality problem for producers of Cheddar cheese. Subjective methods to evaluate crystal coverage of cheese surfaces have been reported previously, but objective methods are currently lacking. The objectives of this work were to develop and evaluate an objective method to measure the area occupied by calcium lactate crystals on surfaces of naturally smoked Cheddar cheese samples using digital photography and image analysis. Coefficients of variation ranged from 1.29 to 4.68% for 5 replicate analyses of 3 different cheese surfaces that ranged from approximately 2 to 49% of total surface area occupied by crystals. Thus, results showed a high degree of repeatability for the 3 cheese surfaces, which ranged from very slight and geometrically simple to very heavy and geometrically complex crystal coverage. The method underestimated total area occupied by crystals on the 3 surfaces by 0.24 to 4.83% unless the fainter crystal regions that went undetected during initial thresholding were manually segmented and quantified. The wet weight of crystal substance collected per unit of surface area from 20 different cheese samples increased exponentially as the percentage of total surface area occupied by crystals increased. These data were consistent with subjective observations that crystal regions appeared to grow vertically as well as horizontally as they expanded to occupy greater surface area. Image analysis was well suited for evaluating changes in crystal coverage during cheese aging because measurements were made nondestructively and with minimal disruption to the cheese. The area occupied by crystals on 6 different surfaces from 3 different cheese samples increased linearly (R2 = 0.94 to 0.99) during storage at 4 degrees C for up to 33 wk. However, the rates of increase differed significantly among the 3 cheese samples. Image analysis may serve as a useful tool to quantitatively evaluate the effects of factors such as cheese composition, packaging conditions and storage temperature on rate of crystal growth and time of crystal appearance during storage.

Calcium Compounds↗
PubMed2005

Application of exopolysaccharide-producing cultures in reduced-fat Cheddar cheese: cryo-scanning electron microscopy observations.

The microstructure of reduced- and full-fat Cheddar cheeses made with exopolysaccharide (EPS)-producing and nonproducing cultures was observed using cryo-scanning electron microscopy. Fully hydrated cheese samples were rapidly frozen in liquid nitrogen slush (-207 degrees C) and observed in their frozen hydrated state without the need for fat extraction. Different EPS-producing cultures were used in making reduced-fat Cheddar cheese. Full-fat cheese was made with a commercial EPS-nonproducing starter culture. The cryo-scanning electron micrographs showed that fat globules in the fully hydrated cheese were surrounded by cavities. Serum channels and pores in the protein network were clearly observed. Young (1-wk-old) full-fat cheese contained wide and long fat serum channels, which were formed because of fat coalescence. Such channels were not observed in the reduced-fat cheese. Young reduced-fat cheese made with EPS-nonproducing cultures contained fewer and larger pores than did reduced-fat cheese made with a ropy strain of Lactococcus lactis ssp. cremoris (JFR1), which had higher moisture levels. A 3-dimensional network of EPS was observed in large pores in cheese made with JFR1. Major changes in the size and distribution of pores within the structure of the protein network were observed in all reduced-fat cheeses, except that made with JFR1, as they aged. Changes in porosity were less pronounced in both the full-fat and the reduced-fat cheeses made with JFR1.

Cheese↗
PubMed2006

Influence of calcium and phosphorus, lactose, and salt-to-moisture ratio on Cheddar cheese quality: manufacture and composition.

Eight Cheddar cheeses with 2 levels of calcium (Ca) and phosphorus (P), residual lactose, and salt-to-moisture ratio (S/M) were manufactured. All cheeses were made using a stirred-curd procedure and were replicated 3 times. Treatments with a high level of Ca and P were produced by setting the milk and drawing the whey at a higher pH (6.6 and 6.3, respectively) compared with the treatments with a low level of Ca and P (pH of 6.2 and 5.7, respectively). The lactose content in the cheeses was varied by adding lactose (2.5% by weight of milk) to the milk for high lactose cheeses, and washing the curd for low lactose cheeses. The difference in S/M was obtained by dividing the curds into halves, weighing each half, and salting at 3.5 and 2.25% of the weight of the curd for high and low S/M, respectively. All cheeses were salted at a pH of 5.4. Modifications in cheese-making protocols produced cheeses with desired differences in Ca and P, residual lactose, and S/M. Average Ca and P in the high Ca and P cheeses was 0.68 and 0.48%, respectively, vs. 0.53 and 0.41% for the low Ca and P cheeses. Average lactose content of the high lactose treatments at d 1 was 1.48% compared with 0.30% for the low lactose treatments. The S/M for the high and low S/M cheeses was 6.68 and 4.77%, respectively. Mean moisture, fat, and protein content of the cheeses ranged from 32.07 to 37.57%, 33.32 to 35.93%, and 24.46 to 26.40%, respectively. The moisture content differed among the treatments, whereas fat and protein content on dry basis was similar.

Animals↗