Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Aluminum Compounds”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources

Oral aluminum toxicity in a non-dialyzed patient with renal failure.

A patient is described with chronic renal failure who developed toxic levels of aluminum in bone after one year of oral aluminum hydroxide ingestion with a total dose of 711 grams. Caution in the use of oral aluminum compounds is recommended in patients with renal failure.

Administration, Oral↗

Mutans streptococci and lactobacilli in plaque on a leucite-reinforced dental ceramic and on a calcium aluminate cement.

In this in vivo study, the proportions of mutans streptococci and lactobacilli in plaque were examined (1) on proximal surfaces of bonded, leucite-reinforced ceramic crowns and (2) on class V restorations of calcium aluminate cement (CAC). The examined proportions were intraindividually compared with those of resin composite and enamel. Mutans streptococci and lactobacilli in samples from plaque that was accumulated for 10 days on the following surfaces were determined by cultivation on blood agar plates and species-selective plates: (1) proximal leucite-reinforced ceramic crown, class II composite and enamel (n=11); and (2) class V restoration of CAC and composite, and enamel (n=17). Mutans streptococci and lactobacilli in the samples were distributed in three groups: 0, >0-1, and >1% of total bacteria. The surfaces with detected mutans streptococci were similarly distributed between the materials and enamel. The highest proportion of mutans streptococci and lactobacilli were observed on ceramic followed by composite and enamel. A higher proportion of lactobacilli, but not of mutans streptococci, was detected on enamel compared to CAC and composite. However, no significant differences were found between the surfaces. Conclusively, the materials investigated did not show different relative proportions of mutans streptococci and lactobacilli in plaque, compared to enamel.

Adult↗

Removal of direct dyes by coagulation: the performance of preformed polymeric aluminum species.

Removal of three direct dyes (Direct Black 19, Direct Red 28, and Direct Blue 86) by coagulation with three different Al based coagulants was investigated. The main purpose of this paper is to examine the coagulation features of polymeric aluminum coagulants in treatment of dye-polluted waters and the emphasis was placed on the roles of preformed Al species, particularly Al(13). The performance of Al(13) in coagulation of dyes was observed through jar tests by comparing traditional Al salt, polyaluminum chloride (PACl), and purified Al(13). The results showed that under most cases Al(13) had significantly higher efficiency in removal of direct dyes than traditional Al salt and commercial PACl with the exception of Direct Red 28 removal under high pH range. The coagulation of direct dyes could be greatly affected by pH. Reducing pH was favorable for preformed Al species in a broad pH range. For traditional Al coagulant, efficient dye removal only occurred in a relatively narrow pH range of near 6.0. The outstanding coagulation behavior of Al(13) could be ascribed to its high charge neutralization ability, relative stability and potential self-assembly tendency.

Aluminum Compounds↗

Effects of Er:YAG and Nd:YAP laser irradiation on the surface roughness and free surface energy of enamel and dentin: an in vitro study.

Sixty-seven extracted molars were selected (134 samples). Dentin and enamel samples were prepared by buccal and lingual surface sectioning to expose a planar enamel or dentin surface. For the roughness study, 80 samples were randomly assigned to eight groups. Enamel and dentin surfaces were etched with a 37% phosphoric acid solution, irradiated with an Er:YAG laser or irradiated with a Nd:YAP laser. Samples were then observed in SEM using BSE. For the free-surface energy study, 54 samples received the same treatment as above. Two contact angle measurements were made on each surface using a goniometer. Data were analyzed by a non-parametric statistical test. Morphological changes on enamel and dentin were greater with acid-etch and Er:YAG laser than with Nd:YAP laser. Free surface energy was significantly greater with acid-etch or Er:YAG laser than with Nd:YAP laser (p < 0.001).

Acid Etching, Dental↗

Intracellular mechanisms underlying aluminum-induced apoptosis in rabbit brain.

Loss of neurons is a hallmark of neurodegenerative disorders and there is increasing evidence suggesting that apoptosis is a key mechanism by which neurons die in these diseases. Mitochondrial dysfunction has been implicated in this process of neuronal cell death, but there is a growing body of evidence suggesting also an active role for the endoplasmic reticulum in regulating apoptosis, either independent of mitochondria, or in concert with mitochondrial-initiated pathways. Investigations in our laboratory have focused on neuronal injury resulting from the administration of aluminum maltolate, via the intracisternal route, to New Zealand white rabbits. This treatment induces both mitochondrial and endoplasmic reticulum stress. Agents such as lithium or glial cell-line derived neurotrophic factor (GDNF) have the ability to prevent aluminum-induced neuronal death by interfering with the mitochondrial and/or the endoplasmic reticulum-mediated apoptosis cascade. Cytochrome c release from mitochondria and binding to Apaf-1 initiates the aluminum-induced apoptosis cascade; this is prevented by lithium treatment. GDNF also protects against aluminum-induced apoptosis but by upregulation of Bcl-X(L), thereby preventing the binding of cytochrome c to Apaf-1. This animal model system involving neurotoxicity induced by an aluminum compound provides new information on mechanisms of neurodegeneration and neuroprotection.

Aluminum↗

Reproductive and developmental toxicity of aluminum: a review.

It is well known that aluminum is a developmental toxicant when administered parenterally. However, until recently, there was little concern about embryo/fetal consequences of aluminum ingestion because bioavailability was considered low. The importance of the route of exposure and the chemical form of the aluminum compound on the developmental toxicity of this element are now well established. Although no evidence of maternal and embryo/fetal toxicity was observed when high doses of aluminum hydroxide were given orally to pregnant rats and mice during organogenesis, signs of maternal and developmental toxicity were found in mice when aluminum hydroxide was given concurrently with citric or lactic acids. On the other hand, studies in rabbits have shown that aluminum-induced behavioral toxicity is greater in adult and aged animals than in young adults. However, maternal dietary exposure to excess A1 during gestation and lactation which did not produce maternal toxicity would be capable of causing permanent neurobehavioral deficits in weanling mice and rats. Adverse effects of parenteral aluminum administration on the mouse male reproductive system have also been reported. The embryo/fetal toxicity of aluminum administration, the potential reproductive toxicology of aluminum exposure, and the neurodevelopmental effects of aluminum are here reviewed.

Aluminum↗

Sarcoidlike lung granulomatosis induced by aluminum dusts.

Interstitial lung disease developed in a 32-yr-old chemist after working 8 yr in a dusty atmosphere containing aluminum powders. Bronchoalveolar lavage disclosed a helper T-lymphocyte alveolitis, and transbronchial lung biopsies showed sarcoidlike epithelioid granulomas. These granulomas contained dust identified by mineralogic analyses as consisting mainly of aluminum particles. Nasal and liver biopsies and a Kveim test did not reveal extrapulmonary granulomatous infiltration. An extensive immunologic work-up showed none of the abnormalities classically seen in sarcoidosis, but peripheral blood lymphocytes exhibited blastic transformation in the presence of soluble aluminum compounds. About 1 yr after cessation of exposure, a chest radiograph and lung function tests remained essentially unchanged, but signs of alveolitis disappeared. This observation suggests that aluminum may cause granulomatous lung disease accompanied by a helper T-lymphocyte alveolitis, similar to that of berylliosis and sarcoidosis. Further observations would be necessary to show if this constitutes an early stage of aluminum-induced fibrosis (aluminum lung).

Adult↗

Biocompatibility of two commercial forms of mineral trioxide aggregate.

AIM: To examine the biocompatibility of two commercial forms of mineral trioxide aggregate (MTA), by evaluating the morphology of an established cell line. METHODOLOGY: The two cements were cast on glass cover slips and cured for 1 or 28 days. Saos-2 osteosarcoma cells were trypsinized and seeded at a density of 1 x 10(5) cells and were then placed in medium over the material-coated coverslips for 1, 5 and 7 days. After these time intervals the media were discarded and the cells fixed. Cell morphological investigation was performed by scanning electron microscopy at various magnifications ranging from x 250 to x 500. The biocompatibility of cement constituents, alusilicate flux and bismuth oxide was also investigated. RESULTS: All cement samples cured for 1 day showed a confluent cell monolayer after 5 and 7 days. The response to both materials was similar. Materials cured for 28 days showed incomplete cell confluence after 1 and 5 days. Alusilicate flux and bismuth oxide did not demonstrate biocompatibility. CONCLUSIONS: The 1-day cured samples of two commercial forms of MTA showed good biocompatibility. However, the 28-day cured samples were less biocompatible after 1 and 5 days.

Aluminum Compounds↗

Enhanced coagulation in a typical North-China water treatment plant.

The characteristics of typical source waters in northern China and their enhanced coagulation features were studied in this paper. Through bench scale tests, a composite coagulant (HPAC) was selected for this kind of high alkalinity and pH water. It can be 30% more efficient in organic matter (OM) removal than the traditional coagulants (AlCl(3), FeCl(3)), and polyaluminum chloride (PACl), especially more efficient in removing high SUVA, hydrophobic and high molecular weight dissolved organic matter (DOM). It is found that some DOM with low SUVA has precedence over that with high SUVA to be removed at conventional dosages in some seasons, and that the priority of DOM removal is in the same sequence for all the coagulants. DOM with high SUVA is not always more easily removed. When applying HPAC as coagulant, flotation process can remove hydrophobic OM more efficiently than sedimentation process in pilot scale tests.

Aluminum Chloride↗

Adsorption characteristics of certain antibiotics to veegum and activated charcoal.

Adsorption of streptomycin sulphate and neomycin sulphate to veegum and activated charcoal in water or buffered solution was studied. Both antibiotics demonstrated a significant reduction in their activity, particularly in water. The activity of streptomycin sulphate decreased in the following order: veegum in water greater than activated charcoal in water greater than veegum in buffer greater than activated charcoal in buffer and their calculated adsorption coefficients were 111 X 10(-3), 57 X 10(-3), 33 X 10(-3) and 25 X 10(-3) (respectively), while neomycin sulphate was affected in the following decreasing order: activated charcoal in water greater than activated charcoal in buffer greater than veegum in water greater than veegum in buffer. The calculated adsorption coefficients were 64 X 10(-3), 47 X 10(-3), 34 X 10(-3) and 26 X 10(-3) (respectively). The mechanism of adsorption was discussed.

Adsorption↗