Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Silicates”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69Linked to original sources

Towerlike SBA-15: base and (10)-specific coalescence of a silicate-encased hexagonal mesophase tailored by nonionic triblock copolymers.

Hydrothermal templating of mesoporous molecular sieves by nonionic triblock copolymers [poly(oxyethylene)-poly(oxypropylene)-poly(oxyethylene) (PEO-PPO-PEO)] at specific block lengths of EO(20)PO(70)EO(20) and selected 2 M HCl dosage (pH -0.3) caused the formation of micrometer-sized SBA-15 hexagons with well-ordered hexagonal pore channels (pore size and wall thickness of approximately 6 nm and pore-to-pore distance of approximately 12 nm) after template removal. For a beneficial lower surface energy, these {10} laterally coalesced hexagons tend to stack imperfectly over the base into towerlike entities, leaving dislocations and faults within the single domain thus formed. Evidence for the mechanism of Brownian motion/coalescence of the hexagonal-mesophase particulates, previously suggested for MCM-41 accretion in the presence of cationic surfactant, is more clearly identifiable in the present low-pH case of amphiphilic block copolymer templates and linear silica oligomers.

Journal Article↗

Spreading of viscous liquids at high temperature: silicate glasses on molybdenum.

The spreading of Si-Ca-Al-Ti-O glasses on molybdenum has been investigated. By controlling the oxygen activity in the furnace, spreading can take place under reactive or nonreactive conditions. As the nucleation of the reaction product under reactive conditions is slow in comparison to the spreading kinetics, in both cases the glass front moves on the metal surface with similar spreading velocities. Spreading can be described using a molecular dynamics model where the main contribution to the wetting activation energy comes from the viscous interactions in the liquid. Enhanced interfacial diffusions in low-oxygen activities (reactive cases) form triple-line ridges that can pin the wetting front and cause a stick-slip motion.

Journal Article↗

Comparative study of morphometric properties characterizing the complexity of silicate pore networks probed by adsorption of nitrogen and methanol.

In this work, we compare the surface and morphometric properties of the pore networks in four silicas (code names Fr1428, Fr474, Fr1386, and MM1164) with different random porosities using the adsorption isotherms of two different probe adsorbents, nitrogen and methanol. The parent material Fr1428 was a pure silica 25 microm sample. The Fr474 sample was the same one with bonded electroneutral diol groups on its outer surface. Fr1386 was the parent material with bonded electroneutral diol groups on its outer surface and sulfonic groups on its inner surface, and the MM1164 sample was the original sample with external electroneutral diol groups and internal n-octadecyl groups. The properties examined were the specific surface area S(p) and the specific pore volume V(p), the pore connectivity c, the pore anisotropy b, the tortuosity tau, and the lacunarity lambda of the pore network as well as the percentage microporosity. These properties provide a complete characterization of complexity of the porous network. The surface areas of the solids were estimated via the traditional BET plots (S(BET)) and the I-point method (S(I)). The two sets of values S(BET) and S(I) were practically identical and they decrease as the size of the functional group increases. The values of percentage microporosity were also determined by the same I-point method using the variation of the C parameter of the BET equation. The total pore volume V(p) was found to be higher in the case of methanol adsorption, compared to nitrogen, which might be related to increase condensation. The networks of the pores were simulated using a dual site bond model (DSBM) and Monte Carlo (MC) techniques for achieving their proper arrangement into the solids. From the resulting simulating networks, the pore connectivity distributions (PCD) and their mean values c(mean) were estimated and favorably compared to the values of connectivity c(Seaton) determined according to the method of Seaton. Both values decrease with the size of the functional groups and are weakly affected by the adsorbent employed. From the simulation pore network, the mean values of tortuosity tau(mean) were also estimated and found to be lower when N2 was used as adsorbate compared to MeOH. The values of lacunarity lambda, estimated according to the method by Allain and Cloitre using the moving box technique in the DSBM/MC simulation matrix of the pore network, indicate that the distribution of the poreless mass into the matrix increases with the size of the functional group. Finally, the internal relationships observed between the pore anisotropy b and the percentage microporosity as well as between the tortuosity tau and the pore connectivity c are discussed.

Journal Article↗

Behaviour of photopolymerized silicate glass fibre-reinforced dimethacrylate composites subjected to hydrothermal ageing: part II. Hydrolytic stability of mechanical properties.

The flexural properties and failure morphologies of dimethacrylate-copolymer composites reinforced with either S2-glass or quartz fibres ( approximately 33-66 vol%) were examined after hydrothermal ageing (0-3 mon at 37 degrees C). Initially the S2-glass composites were generally stiffer and stronger than comparably reinforced quartz composites, but within 1 wk the properties of S2-glass composites decreased by 12%-26%. The properties of quartz composites were relatively stable, except for those of composites with the least reinforcement (35 vol%), which decreased by roughly 15%. Scanning electron microscopy revealed that in all composites buckling had occurred at the site of load application. Evidence of good fibre-matrix adhesion was observed for both types of composites under all conditions. Modelling of degradation between 1 wk and 3 mon revealed that: (1) the only temporal change was a slight increase in the stiffness of S2-glass composites; and (2) higher reinforcement levels reduced the retention of strength in S2-glass composites but had the opposite effect (on both properties) for quartz composites (p<0.05). For the most highly reinforced S2-glass composites, susceptibility to degradation was offset by high initial properties; and after ageing (elastic modulus approximately 50 GPa, strength approximately 1.2 GPa), these composites were still, on average, approximately 25% stiffer and 50% stronger than the more hydrostable quartz counterparts.

Journal Article↗

Influence of the non-bridging oxygen groups on the bioactivity of silicate glasses.

The effect of the composition and bonding configuration of the bioactive silica-based glasses on the initial stage in vitro bioactivity is presented. Information of the IR active Si-O groups of glass in the system SiO(2)-P(2)O(5)-CaO-Na(2)O-K(2)O-MgO-B(2)O(3) was obtained by fourier transform Infrared (FTIR) spectroscopy. Two different bands associated to non-bridging oxygen stretching vibrations (Si-O-1NBO and Si-O-2NBO) and a gradual shifting of the bridging oxygen stretching vibration (Si-O) have been observed and evaluated. Both effects are attributed to a decrease of the local symmetry originating from the incorporation of alkali ions into the vitreous silica network. The Si-O-NBO(s)/Si-O(s) absorbance intensity ratio increases with a gradual incorporation of the alkali ions (diminution of SiO(2) content) following a linear dependence up to values close to 50 wt % of SiO(2). In vitro test analysis by scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDXA) showed a correlation between the amount and type of the non-bridging oxygen functional groups and the growth of the silica-rich and CaP layers. It was found that a minimum concentration of Si-O-NBO bonds in the glass network is required in order to have an efficient ion exchange and dissolution of the silica network. Finally, the bioactivity of the glass is favored by the presence of the Si-O-2NBO groups in the glassy network. The role of these functional groups in the dissolution of the silica network through the formation of silanol groups and the adsorption of water is discussed.

Journal Article↗

Grafting of cyclopentadienyl ruthenium complexes on aminosilane linker modified mesoporous SBA-15 silicates.

Cyclopentadienyl ruthenium phosphane and carbene complexes are grafted on the surface of mesoporous SBA-15 molecular sieves through an aminosilane linker. The nature of the support after the grafting is examined by powder XRD, TEM and N(2) adsorption/desorption analysis. Elemental analysis, FT-IR, DRIFTS, TG-MS and MAS-NMR studies confirm the successful grafting of the complexes on the surface. The grafted materials are applied for catalytic aldehyde olefination and cyclopropanation.

Journal Article↗