Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Extraction and Processing Industry”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69Linked to original sources

In vitro milling accuracy and fit of 'natural inlays'.

OBJECTIVE: This study aimed to investigate the milling behaviour of natural inlays (NI) dental restorations constructed from sound extracted teeth. This was done by comparing the milling accuracy and fit of NI to those of industrial porcelain inlays (PI), milled in the same way. METHODS: A calibration pro-inlay was used to mill three NI and three PI. These were cemented in six acrylic cavities reproduced from the calibration mould, using composite luting cement. No etching and bonding were done. After storage for 24 h in water at room temperature the specimens were sliced buccolingually in a standardised way. For each specimen, two sections were photographed under a light-microscope, resulting in enlarged pictures of the sections. An acetate matrix with the measurement points was placed over each picture in a standardised way. The interfaces between inlays and moulds were measured at 13 fixed points per section using computerised image analysis software. The mean vertical- and floor-interfaces were calculated for each picture, and the overall means were found for each group. Confidence intervals were used for comparison of the differences. The profiles of the milled materials were examined using scanning electron microscopy. RESULTS: There were no differences between NI and PI in the mean interfaces (NI, 102 +/- 8 micrometers; PI, 107 +/- 8 micrometers). Electron microscopy revealed no apparent differences in the profiles of the milled surfaces. CONCLUSION: These findings indicate that the milling accuracy and the fit of natural inlays and milled porcelain inlays are comparable.

Calibration↗

Immobilization of arsenic in a tailings material by ferrous iron treatment.

Weathering and internal dissolution processes in mining waste materials may mobilize elevated levels of arsenic (As), contaminating ground and surface waters. Treating the polluted waters with iron oxyhydroxides is an established remediation method. By contrast, little knowledge is available to stabilize As in source materials by treating it with Fe precipitates and, on this way, to prevent the generation of polluted waters. In the present work the efficiency of Fe(II) treatment on As immobilization in a tailings material (TM) was studied with regard to the Fe:As molar ratio, the influence of CaCO3 amendment, and the As desorption at continued intensive leaching of Fe-treated TM. Fe precipitates were created by aerobic treatment of TM with Fe(II)sulfate at several Fe:As molar ratios with or without adding CaCO3, followed by aging the Fe-treated TM. The As retention in the treated tailings was studied by 4-fold elution with water, and the As desorption kinetics was examined by suspension leaching in laboratory microcosms over 3 weeks. Fe(II) treatment of TM reduced the water-extractable total As to <10 microg/L as the Fe:As molar ratio increased from 0 to 8. The water-soluble As of Fe-treated tailings could be reduced to 10-30 microg/L also under conditions of intensive leaching. Stabilizing the pH with CaCO3 resulted in consistently higher As release. The As desorption data followed the first-order kinetics in the early time stages of the desorption whereas at longer times the parabolic diffusion model was valid.

Arsenic↗

Development of a wireless system for auditory neuroscience.

In order to study how the auditory cortex extracts communication sounds in a realistic acoustic environment, a wireless system is being developed that will transmit acoustic as well as neural signals. The miniature transmitter will be capable of transmitting two acoustic signals with 37.5 KHz bandwidths (75 KHz sample rate) and 56 neural signals with bandwidths of 9.375 KHz (18.75 KHz sample rate). These signals will be time-division multiplexed into one high bandwidth signal with a 1.2 MHz sample rate. This high bandwidth signal will then be frequency modulated onto a 2.4 GHz carrier, which resides in the industrial, scientic, and medical (ISM) band that is designed for low-power short-range wireless applications. On the receiver side, the signal will be demodulated from the 2.4 GHz carrier and then digitized by an analog-to-digital (A/D) converter. The acoustic and neural signals will be digitally demultiplexed from the multiplexed signal into their respective channels. Oversampling (20 MHz) will allow the reconstruction of the multiplexing clock by a digital signal processor (DSP) that will perform frame and bit synchronization. A frame is a subset of the signal that contains all the channels and several channels tied high and low will signal the start of a frame. This technological development will bring two benefits to auditory neuroscience. It will allow simultaneous recording of many neurons that will permit studies of population codes. It will also allow neural functions to be determined in higher auditory areas by correlating neural and acoustic signals without apriori knowledge of the necessary stimuli.

Animals↗

Bioleaching of spent refinery processing catalyst using Aspergillus niger with high-yield oxalic acid.

A spent refinery processing catalyst was physically and chemically characterized, and subjected to one-step and two-step bioleaching processes using Aspergillus niger. During bioleaching of the spent catalysts of various particle sizes ("as received", 100-150 microm, <37 microm, and x =2.97 (average) microm) and pulp densities, the biomass dry weight and pH were determined. The corresponding leach liquor was analysed for excreted organic acids along with heavy metal values extracted from the catalyst. Chemical characterization of the spent catalyst confirmed the presence of heavy metal including Al (33.3%), Ni (6.09%) and Mo (13.72%). In general, the presence of the spent catalyst caused a decrease in the biomass yield and an increase in oxalic acid secretion by A. niger. The increase in oxalic acid secretion with a decrease in the catalyst particle size (up to <37 microm) led to corresponding increase in the extraction of metal values. The highest extraction of metal values from the spent catalyst (at 1% w/v pulp density and particle size <37 microm) were found to be 54.5% Al, 58.2% Ni and 82.3% Mo in 60 days of bioleaching. Oxalic acid secretion by A. niger in the presence of the spent catalyst was stimulated using 2-[N-Morpholino]ethanesulfonic acid (MES) buffer (pH 6), which resulted in comparable metal extraction (58% Al, 62.8% Ni and 78.9% Mo) in half the time required by the fungus in the absence of the buffer. Spent medium of A. niger grown in the absence and in the presence of MES buffer were found to leach almost similar amounts of Al and Ni, except Mo for which the spent medium of buffered culture was significantly more effective than the non-buffered culture. Overall, this study shows the possible use of bioleaching for the extraction of metal resources from spent catalysts. It also demonstrated the advantages of buffer-stimulated excretion of organic acids by A. niger in bioleaching of the spent catalyst.

Aluminum Oxide↗

Spread of bacterial pathogens during preparation of freshly squeezed orange juice.

To study the potential of three bacterial pathogens to cross-contaminate orange juice during extraction, normal operation conditions during juice preparation at food service establishments were simulated. The spread of Salmonella enterica serovar Typhimurium, Escherichia coli O157:H7, and Listeria monocytogenes from inoculated oranges to work surfaces and to the final product was determined. The transference of these three bacterial pathogens to orange juice made from uninoculated oranges with the use of contaminated utensils was also studied. Fresh oranges were inoculated with a marker strain of rifampicin-resistant Salmonella Typhimurium, E. coli O157:H7, or L. monocytogenes. Final pathogen levels in juice were compared as a function of the use of electric or mechanical juice extractors to squeeze orange juice from inoculated oranges. Pathogen populations on different contact surfaces during orange juice extraction were determined on sulfite-phenol red-rifampicin plates for Salmonella Typhimurium and E. coli O157:H7 and on tryptic soy agar supplemented with 0.1 g of rifampicin per liter for L. monocytogenes. After inoculation, the average pathogen counts for the orange rind surface were 2.3 log10 CFU/cm2 for Salmonella Typhimurium, 3.6 log10 CFU/cm2 for E. coli O157:H7, and 4.4 log10 CFU/cm2 for L. monocytogenes. This contamination was spread over all utensils used in orange juice squeezing. Mean pathogen counts for the cutting board, the knife, and the extractor ranged from -0.3 to 2.1 log10 CFU/cm2, and the juice contained 1.0 log10 CFU of Salmonella Typhimurium per ml, 2.3 log10 CFU of E. coli O157:H7 per ml, and 2.7 log10 CFU of L. monocytogenes per ml. Contact with contaminated surfaces resulted in the presence of all pathogens in orange juice made from uninoculated oranges. These results give emphasis to the importance of fresh oranges as a source of pathogens in orange juice.

Beverages↗

Human chymotrypsinogen B production from Pichia pastoris by integrated development of fermentation and downstream processing. Part 2. Protein recovery.

The purification of human chymotrypsinogen B (hCTRB) after expression and secretion by the yeast Pichia pastoris is described based on two different approaches using integrated initial recovery. Extraction employing aqueous two-phase systems (ATPS) from poly(ethylene glycol) and sodium sulfate allows direct processing of cell containing yeast suspensions of 50% wet weight. The target protein is obtained partially purified in the top phase while cells and cell debris are partitioned to the bottom phase of the system. hCTRB is further purified by adsorption from the top phase to the cation exchanger SP Sepharose Big Beads and elution in a salt step. The single step isolation of hCTRB is possible by expanded bed adsorption (EBA) using a fluidized cation exchanger (Streamline SP XL). A design strategy is shown taking both target protein binding and stable fluidization of the stationary phase in cell containing suspensions into consideration. For the example of hCTRB isolation from cell containing P. pastoris suspensions, a successful use of this strategy is demonstrated. Both initial recovery strategies deliver a product that can be further purified and formulated by ultrafiltration/diafiltration followed by lyophilization, resulting in a homogeneous product. Scale-up to 30-90 L of culture suspension was shown for both methods, resulting in a product of similar quality. Comparing both strategies reveals that the two-step ATPS route is better suited for high cell density cultures, while the single step EBA method is preferred for cultures of moderate cell density. This is due to the fact that application of EBA is restricted to suspensions of 10-12.5% wet weight cell concentration, thus necessitating dilution of the original broth prior to sample application. The data presented show that integrated recovery operations are a valuable alternative to traditional processing for systems that are problematic during initial solid-liquid separation.

Chymotrypsinogen↗

Identification of fish species after cooking by SDS-PAGE and urea IEF: a collaborative study.

A collaborative study, to validate the use of SDS-PAGE and urea IEF, for the identification of fish species after cooking has been performed by nine laboratories. By following optimized standard operation procedures, 10 commercially important species (Atlantic salmon, sea trout, rainbow trout, turbot, Alaska pollock, pollack, pink salmon, Arctic char, chum salmon, and New Zealand hake) had to be identified by comparison with 22 reference samples. Some differences in the recoveries of proteins from cooked fish flesh were noted between the urea and the SDS extraction procedures used. Generally, the urea extraction procedure appears to be less efficient than the SDS extraction for protein solubilization. Except for some species belonging to the Salmonidae family (Salmo, Oncorhynchus), both of the analytical techniques tested (urea IEF, SDS-PAGE) enabled identification of the species of the samples to be established. With urea IEF, two laboratories could not differentiate Salmo salar from Salmo trutta. The same difficulties were noted for differentiation between Oncorhynchus gorbuscha and Oncorhynchus keta samples. With SDS-PAGE, three laboratories had some difficulties in identifying the S. trutta samples. However, in the contrast with the previous technique, SDS-PAGE allows the characterization of most of the Oncorhynchus species tested. Only Oncorhynchus mykiss was not clearly recognized by one laboratory. Therefore, SDS-PAGE (Excel gel homogeneous 15%) appears to be better for the identification, after cooking, of fish such as the tuna and salmon species which are characterized by neutral and basic protein bands, and urea IEF (CleanGel) is better for the gadoid species, which are characterized by acid protein bands (parvalbumins). Nevertheless, in contentious cases it is preferable to use both analytical methods.

Animals↗

[Coffee hulls and pulp. XII. Effect of storage of coffee pulp on its nutritive value for calves].

Coffee pulp, dehydrated and stored for 7, 13 and 17 months or ensiled for 4, 10 and 14 months, was studied in calves with a rapid growing rate. Storage of dehydrated coffee pulp did not affect its chemical composition, but ensiling reduced crude fiber and increased its nitrogen free extract content after 10 and 14 months. Three growth trials were carried out with Holstein calves averaging 95 kg in the first and second trials, and 130 kg in the third. Eighteen calves were used in the first trial and 24 in each of the other two. In each trial the animals were divided into three equal groups and randomly assigned to one of the following treatments: control, which contained 48% cottonseed hulls, and the other two, with 30% dehydrated coffee pulp or 30% ensiled coffee pulp. Basically, the difference between trials consisted in the time of storage or ensiling of coffee pulp. In all trials, weight gains of calves fed coffee pulp (1.00, 0.90 and 0.98 kg/day, and 1.06, 0.94 and 1.08 kg/day, respectively) were significantly lower (P less than 0.05) than the weight gains induced by the control ration (1.21, 1.08 and 1.19 kg/day). Feed intake was also lower, but feed conversion ratio was higher for those rations containing coffee pulp. Calf performance was better with ensiled than with deydrated coffee pulp, particularly in the third trial, where the differences in weight gains were significantly higher (P less than 0.05). It is concluded that storage time does not change nutritive value of coffee pulp; and the ensiling is an adequate process for storing pulp during coffee harvesting, and, possibly also, for improving its nutritive value.

Animal Feed↗

Off-flavour release from packaging materials and its prevention: a foods company's approach.

Off-flavours in packed food are causes for consumer complaints. Often, they are related to packaging materials. For food companies, this represents not only costs related to production, but also a possible loss of brand confidence and market share. The origin of packaging-related off-odours are many sided. Odours derive from the degradation of base packaging materials and their converting processes, including printing, coating and lamination as well as the interaction between food and packaging. Many substances and groups of substances have been identified so far. In spite of the fact that the quality of packaging materials is clearly defined in the specifications (e.g. limit for residual solvents, standardized odour and taste transfer tests), off-flavour cases still do occur. This paper sets out ways of avoiding such problems, even in factories and laboratories which are not so well equipped. Prevention at Nestlé is based on several pillars. For a number of years, a sensory panel at the central laboratory has been specialized in and trained on packaging off-favours. The panel can describe and identify odours and their origin. To confirm the results by instrumental analysis, various extraction and separation techniques are available, including distillation/extraction techniques and direct thermal desorption followed by gas chromatography coupled with mass spectroscopy and an olfactory sniffing port. However, this knowledge must also be present in the operational plants where the problem usually originates. To manage this knowledge transfer, two tools were introduced to build up sensory panels that can evaluate packaging material. First, an aroma library kit was developed that contained odours that are often involved in off-odour cases. For each odour, a typical descriptor and the chemical composition are given. Beside that, information is added about the occurrence. Second, a glossary, which contains descriptors for packaging-related off-odours, was published. This small booklet helps to unify the odour descriptions, especially thanks to its translation into three important languages. This paper describes the tools mentioned above, as well as examples and limitations for their application.

Food Contamination↗

Demonstrating the validity of natural products as anti-infective drugs.

This presentation reviews the synthetic or classical development pathway of drug development and contrasts it with developing natural products as drugs. Also presented is an example of a traditional medicine that has been developed from a natural product and has become a "new/old" antiparasitic drug used in the treatment of malaria. The classic paradigm of synthetic drug development breaks down into drug discovery, drug design, preclinical studies, and clinical studies. This paradigm, constructed to weed out failures, results in a drug-development process that is high risk, time consuming, and expensive. The process requires screening an average of 10,000 active compounds to find a single compound that successfully makes its way through validation to drug approval and the marketplace. Following this paradigm, researchers progress from identifying a chemical lead to testing the compound in humans. The World Health Organization (WHO) Guidelines for the Assessment of Herbal Medicines are based on the classical guidelines and follow the classical approach to validating quality, safety, and efficacy--with one major difference. The starting point is to look at the natural product in humans. By taking into account the traditional experience with the product, the validation standard for safety and efficacy of natural products allows for the prolonged and apparently uneventful use of a substance to offer testimony of its safety. The reliance, then, is on experience--or what Western regulatory agencies would call "anecdotal information." Since most phytomedicines are a combination of several active ingredients, the WHO guidelines cover two kinds of combination products: Combinations that are already used in traditional medicine are considered "old" combination products. "New" combination products are well-known substances that are now being used in combination. Artemisia annua, a pervasive weed, has been referred to in Chinese medicine for thousands of years as a treatment for fever. In 1971, an extraction of artemisia yielded activity against Plasmodium berghei, a mouse model for malaria. The isolated compound, artemisinin, is an example of a traditional medicine that started out in humans, but which then provided a lead structure for a standard drug-development paradigm. Today, artemisinin derivatives are being used widely in combination therapy, especially in areas of the world where there is multidrug-resistant malaria.

Animals↗

In vitro allergenicity of peanut after hydrolysis in the presence of polysaccharides.

BACKGROUND: Peanut is a major allergenic product. Manufacturing processes used in food industries to improve the physicochemical properties of food-based peanut (stabilization, texturization), could cause a modification of the digestibility of peanut proteins and, consequently, their allergenicity. OBJECTIVE: This study aimed at examining the influence of polysaccharides, i.e., gum arabic, low methylated pectin (LMP) and xylan, on the in vitro hydrolysis of peanut protein isolate (PPI) and the in vitro allergenicity of the digestion products. METHODS: PPI was hydrolysed during a two-step in vitro hydrolysis by pepsin, followed by a trypsin/chymotrypsin (T/C) mixture performed in dialysis bags with molecular weight cut-offs (MWCO) of 1000 or 8000 Da. SDS-PAGE electrophoresis and immunoblotting were assessed on the peptic and T/C digestion products in (retentates) and out of the dialysis bags (dialysates). RESULTS: Hydrolysis by all of the digestive enzymes showed retention of some proteins in the dialysis bags in the presence of gum arabic and xylan. The retentates were recognized by IgG and IgE, particularly peptides <20 kDa. The IgE binding with peptides of retentate containing xylan from the dialysis bag with an MWCO of 1000 Da was reduced. The immunoreactivity of hydrolysis products in dialysates was considerably reduced by polysaccharides, regardless of the dialysis bag. CONCLUSION: Reduction of PPI hydrolysis was probably due to non-specific interactions between polysaccharides and peptides. In retentates, IgE-binding epitopes were reduced by digestion and the presence of xylan. In dialysates, they were reduced by all of the polysaccharides. This work highlights the possibility of modulating this food allergy through optimized formulation.

Allergens↗

Reduced ratio of male to female births in several industrial countries: a sentinel health indicator?

CONTEXT: The sex ratio of 1.06:1, the ratio of male to female births, has declined over the past decades. Recent reports from a number of industrialized countries indicate that the proportion of males born has significantly decreased, while some male reproductive tract disorders have increased. OBJECTIVES: To examine the evidence for declines in the male proportion at birth and suspected causes for this decline, and to determine whether altered sex ratio can be considered a sentinel health event. DATA SOURCES: Birth records were analyzed from national statistical agencies. STUDY SELECTION: Published analyses of trends in ratio of males to females at birth and studies of sex determinants evaluating epidemiological and endocrinological factors. DATA EXTRACTION: Proportion of males born: 1950-1994 in Denmark; 1950-1994 in the Netherlands; 1970-1990 in Canada; and 1970-1990 in the United States. DATA SYNTHESIS: Since 1950, significant declines in the proportion of males born have been reported in Denmark and the Netherlands. Similar declines have been reported for Canada and the United States since 1970 and parallel declines also have occurred in Sweden, Germany, Norway, and Finland. In Denmark, the proportion of males declined from 0.515 in 1950 to 0.513 in 1994. In the Netherlands, the proportion of males declined from 0.516 in 1950 to 0.513 in 1994. Similar declines in the proportion of males born in Canada and the United States are equivalent to a shift from male to female births of 8600 and 38000 births, respectively. Known and hypothesized risk factors for reduced sex ratio at birth cannot fully account for recent trends. CONCLUSION: Patterns of reduced sex ratio need to be carefully assessed to determine whether they are occurring more generally, whether temporal or spatial variations are evident, and whether they constitute a sentinel health event.

Canada↗

Kinetic analysis of the psychrophilic anaerobic digestion of wastewater derived from the production of proteins from extracted sunflower flour.

A kinetic analysis of the anaerobic digestion process of wastewater derived from the production of protein isolates from extracted sunflower flour was carried out. The digestion was conducted in a laboratory-scale fluidized bed reactor with saponite (magnesium silicate) as support for the mediating bacteria at psychrophilic temperature (15-19 degrees C). Soluble chemical oxygen demand (COD(s)) removal efficiencies in the range of 95.9-69.0% were achieved in the reactor at organic loading rates (OLR) of between 0.57 and 2.49 g total COD (COD(t))/L d, hydraulic retention times (HRT) of between 20.0 and 4.5 days, and average feed total COD concentration of 11.3 g/L. The yield coefficient of methane production was 0.32 L of methane (at STP) per gram of COD(t) removed. The total volatile fatty acid (TVFA) levels and the TVFA/alkalinity ratio were lower than the suggested limits for digester failure for OLR and HRT up to 2.26 g COD(t)/L d and 5.0 days, respectively. The specific rate of substrate uptake, r (g COD(s)/g VSS d), correlated with the concentration of biodegradable substrate, S (g COD(s)/L), through an equation of the Michaelis-Menten type. The maximum substrate utilization rate, k, and the Michaelis constant, K(s)(), were found to be 0.125 g COD(s)/g VSS d and 124 mg COD(s)/L, respectively. This proposed model predicted the behavior of the reactor very accurately showing deviations lower than 10% between the experimental and theoretical values of substrate uptake rates. A mass (COD(t)) balance around the reactor allowed the COD equivalent of methane volume (W(CH)4) to be obtained, which gave a value of 2.89 g COD(t)/L CH(4), which was virtually coincident with the theoretical value of 2.86 g COD(t)/L CH(4).

Anaerobiosis↗

Identifying the bacterial community on the surface of Intralox belting in a meat boning room by culture-dependent and culture-independent 16S rDNA sequence analysis.

We examined the bacterial community present on an Intralox conveyor belt system in an operating lamb boning room by sequencing the 16S ribosomal DNA (rDNA) of bacteria extracted in the presence or absence of cultivation. RFLP patterns for 16S rDNA clone library and cultures were generated using HaeIII and MspI restriction endonucleases. 16S rDNA amplicons produced 8 distinct RFLP pattern groups. RFLP groups I-IV were represented in the clone library and RFLP groups I and V-VIII were represented amongst the cultured isolates. Partial DNA sequences from each RFLP group revealed that all group I, II and VIII representatives were Pseudomonas spp., group III were Sphingomonas spp., group IV clones were most similar to an uncultured alpha proteobacterium, group V was similar to a Serratia spp., group VI with an Alcaligenes spp., and group VII with Microbacterium spp. Sphingomonads were numerically dominant in the culture-independent clone library and along with the group IV alpha proteobacterium were not represented amongst the cultured isolates. Serratia, Alcaligenes and Microbacterium spp. were only represented with cultured isolates. Pseudomonads were detected by both culture-dependent (84% of isolates) and culture-independent (12.5% of clones) methods and their presence at high frequency does pose the risk of product spoilage if transferred onto meat stored under aerobic conditions. The detection of sphingomonads in large numbers by the culture-independent method demands further analysis because sphingomonads may represent a new source of meat spoilage that has not been previously recognised in the meat processing environment. The 16S rDNA collections generated by both methods were important at representing the diversity of the bacterial population associated with an Intralox conveyor belt system.

Animals↗

Lead contamination in Uruguay.

Uruguay is a developing country of South America with about 3 million people, half of whom live in its principal city, Montevideo. This city has several lead pollution sources as emitting industries, most of them surrounded by residential neighborhoods, some still using lead pipes in drinking water systems of old buildings, and has areas of heavy traffic with cars that are still fueled with leaded gasoline. The toxic effects of this heavy metal are well known. Children are a very sensitive population and their early symptoms of intoxication are not always taken into account. Blood lead is a good indicator of recent exposure to lead influenced by inhalation and ingestion. The systematic data assessment of lead pollution and people exposure in Uruguay was not well known when the Department of Toxicology and Environmental Hygiene of the Faculty of Chemistry began to analyze lead in biological samples, first from exposed workers and next from children and the general population, including sensitive animal species like dogs. Several described studies were carried out analyzing for blood lead to assess lead uptake and to obtain reference values for Uruguayan populations. Since 1986, that Department is the only laboratory where blood lead analyses are done, and the analytical method has been controlled by an interlaboratory quality control program of the Ministry of Labour of Spain and confirmed by experts from the Laboratory of Occupational and Environmental Medicine of Lund, Sweden. Financial and technical support was obtained from Sweden (SAREC) and also from the University of the Republic of Uruguay. Uruguayan lead workers have always been the principally studied population because their lead exposure assessment as well as their health protection education is not always done properly. Uruguay has adopted ACGIH reference values (150 micrograms/m3 in total lead dust, 50 micrograms/m3 respirable lead dust, 300 micrograms/L blood), and the high blood lead levels indicate significant adverse health risks effects and show a lack adequate controls for working conditions. A surveillance of children living in the surroundings of lead processing factories and in different neighborhoods was conducted because no data were available for blood lead in children before 1992. Also, general populations living in those areas or in areas of heavy traffic were assessed. Blood lead levels were always compared with those of control populations sampled at the same time answering a questionnaire. Workplace influence as well as atmospheric, soil, and water pollution were always considered to explain the obtained results. Some studies were carried out in dogs as a sensitive population, showing their higher exposure. The described studies included internal and external quality controls for the analytical methods and data processing. All blood lead analyses were done by atomic absorption spectrometry (AAS) after adding complexing agent and extraction. Samples taken together with Swedish researchers were analyzed in Lund (Department of Occupational and Environmental Medicine University Hospital), at 283.3 nm after electrothermal atomization (ETA). There was good correlation (r = 0.96) among 28 samples shared between Montevideo and Lund laboratories. The authors recommend more systematic clinical examination of workers, children, and the general population to determine the potential health risks for Uruguayan populations so as to improve their health conditions and to officially recognize lead pollution as an environmental problem.

Adult↗

Bioavailability, accumulation and effects of heavy metals in sediments with special reference to United Kingdom estuaries: a review.

Using mainly United Kingdom estuaries as examples, various factors governing the bioavailability, bioaccumulation and biological effects of heavy metals in sediment-dominated estuaries are reviewed. Estuaries and metals primarily discussed include the Mersey (Hg, methylmercury; Pb, alkyllead), the Loughor (Cr, Sn), the Severn (Ag, Cd), the Fal (As, Cu, Sn, Zn), Poole Harbour (Cd, Hg, Se, tributyltin) and Southampton Water (tributyltin). Concentrations and bioavailabilities of metals in estuarine sediments depend on many different processes. Examples include (1) mobilisation of metals to the interstitial water and their chemical speciation, (2) transformation (e.g. methylation) of metals including As, Hg, Pb and Sn (3) the control exerted by major sediment components (e.g. oxides of Fe and organics) to which metals are preferentially bound, (4) competition between sediment metals (e.g. Cu and Ag; Zn and Cd) for uptake sites in organisms, and (5) the influence of bioturbation, salinity, redox or pH on these processes. Under field conditions, identification of dominant processes can be achieved by observing the goodness of fit between metal concentrations in ubiquitous deposit-feeding species and levels in various types of sediment extract over a wide spectrum of sediment types. Factors of more local importance are often indicated by the marked deviation of some points from otherwise excellent relationships. For example, points lying above the line relating tissue Sn concentrations in the clam Scrobicularia plana to those in 1 n HCl extracts of sediments were found to reflect the accumulation of tributyltin, a more readily bioavailable form of Sn. In the same species, unexpectedly high tissue-Cu concentrations were characteristic of very anoxic in sediments and tissue And As and Pb concentrations were suppressed in sediments having high concentrations of Fe oxides. Under field conditions, examples of deleterious effects on benthic organisms that can be attributed to specific metallic pollutants are comparatively rare. Effects of tributyltins from antifouling paints on oysters and neogastropods have been documented and their toxicity has undoubtedly led to environmental degradation in many UK estuaries and coastal areas. In estuaries contaminated with metal-mining wastes, the effects of Cu and Zn on species distribution can be observed, but they are generally less obvious than would be predicted from experimental data. Effects are ameliorated by the induction of metal tolerance mechanisms in some species and in others by the appearance of tolerant strains. The induction of metal detoxification systems involving the formation of granules or metal-binding proteins leads in some species to tissue concentrations that are orders of magnitude higher than normal. For example, high concentrations of Cd and Ag have been found in some species from the Severn Estuary, although there is no unequivocal evidence that either metal has caused deleterious effects on benthic populations. On the other hand, experimental studies with Ag, Cd, Cr, Cu, Hg and Zn show that they are toxic to some species at environmentally realistic levels. Since pollutants rarely occur singly, it is likely that in many moderately contaminated estuaries metals contribute to the stress to organisms caused by substances requiring detoxification. There has been much speculation over the years concerning the biomagnification of metals with increasing trophic levels along food chains. Whilst animals having higher metal concentrations than their prey are sometimes found, the only consistent evidence of biomagnification concerns methylmercury. When estuarine birds are considered, there are relatively few instances in which deleterious effects can unequivocally be attributed to metals or their compounds. However, the Mersey bird kill was attributable to alkyllead pollution from industry. Among other organometals, methylmercury has proved toxic to birds but, so far, no evidence for the toxicity of tributyltin has been reported. However, the compound may have affected bird populations through its effects on the abundance of prey organisms, particularly estuarine molluscs. Of the inorganic forms of metals, Pb in the form of shot has caused problems in many areas and Cd, Hg and Se are suspected of causing toxic effects. There is little field evidence that birds have been affected by Ag, As, Cr, Cu or Zn individually. On the other hand, it is difficult to exclude the possibility that, additively, these metals may produce a significant effect. In part, the lack of evidence reflects the fact that relatively little research has been done. There is scope for more work on metals and organometals in estuarine birds, particularly with regard to their metabolism and their effects on juveniles and individuals subjected to stresses such as starvation.

Journal Article↗

Application of porous foams for size-selective measurements of airborne wheat allergen.

BACKGROUND: Exposure to airborne wheat allergen is a well-known cause of bakers' allergy and asthma. Airborne wheat allergen can be measured by enzyme immunoassays (EIAs) in extracts of inhalable dust samples, but only limited knowledge is available on the size distribution of wheat allergen-carrying particles. Recently, a new sampling medium, porous polyurethane foam, has been introduced for the size-selective sampling of airborne dust in various occupational settings. We investigated the applicability of these foams for size-selective wheat allergen measurements. METHODS: Personal and stationary measurements were performed in a flour mill, using respirable and thoracic foams inserted into the conventional IOM inhalable sampler, together with PTFE (Teflon) filters. Foams and filters were eluted and wheat allergen levels determined by human IgG4 inhibition EIA. RESULTS: Wheat allergen levels could be determined in both filter and foam eluates. Inhalable dust levels from filters and foams ranged from 1.4 to 53 mg m(-3), and wheat allergen levels from 15 to 580 microg m(-3). The allergen was mainly borne on particles with D(ae) (particle aerodynamic diameter) > 10 microm and particles with 4 microm < D(ae) < or = 10 microm, accounting for 54.5-77.5% and 18.9-43.2% of the total allergen yield, respectively. Less than 4% of airborne wheat allergen was carried by particles smaller than 4 mum (respirable fraction). CONCLUSIONS: Measurement of wheat allergen in dust fractions trapped in respirable and thoracic foams is technically feasible. Both wheat flour dust and wheat allergen are mainly concentrated in larger particle-size fractions (extrathoracic and tracheobronchial).

Air Pollutants, Occupational↗

Detection and identification of wild yeasts in lager breweries.

Wild yeasts were detected in 41 out of 101 brewery yeast samples investigated using six different selective principles. Malt extract, yeast extract, glucose, peptone (MYGP) agar supplemented with 195 ppm CuSO4 was found to be the most effective selective principle, detecting wild yeasts in 80% of the contaminated samples. Both Saccharomyces and non-Saccharomyces wild yeasts were detected on this medium. Lysine medium, crystal violet medium and incubation of non-selective media at 37 degrees C detected wild yeasts in 46-56% of the contaminated samples. On using actidione medium, only 20% of the wild yeasts were detected. The combined use of MYGP supplemented with 195 ppm CuSO4 and one of the other selective principles did not improve the recovery of the wild yeasts. The wild yeasts found consisted of Saccharomyces cerevisiae (57%), Pichia spp. (28%) and Candida spp. (15%). Using the API ID 32 C kit, 35 different assimilation profiles were obtained for the 124 wild yeast isolates investigated. All isolates were capable of glucose assimilation, whereas only 79% of the isolates assimilated saccharose, 75% maltose, 70% galactose, 65% raffinose and 65% lactate. Lactose, inositol, rhamnose and glucuronate were not assimilated by any of the isolates. The differences in assimilation pattern did not reflect any differences in recovery by the selective principles investigated. The majority of the wild yeast isolates investigated were capable of growth in wort and beer, indicating their possible role as spoilage organisms. The Sacch. cerevisiae isolates were found to be the most hazardous, with some isolates being capable of extensive growth in bottled beer within seventeen days at ambient temperature.

Beer↗