Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “DIMETHYLFORMAMIDE”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69Linked to original sources

Liquid chromatographic determination of cyclophosphamide enantiomers in plasma by precolumn chiral derivatization.

On the basis of reactions described in the synthetic literature, a two-step chiral derivatization sequence was developed for the anticancer agent cyclophosphamide (CP). The sequence involves amidoalkylation of CP with anhydrous chloral containing 1% dimethylformamide followed by acylation of the resulting secondary alcohol with a chiral carboxylic acid chloride, (+)-6-methoxy-alpha-methyl-2-naphthaleneacetyl chloride, to form a diastereomeric pair. Derivatized (-)-CP and (+)-CP exhibited retention times of 17.2 and 20.7 min, respectively, when chromatographed on Hypersil ODS with acetonitrile/phosphate buffer (pH 6.8) as the mobile phase. Preparation of the individual diastereomers from enantiomerically pure CP enabled correlation of the chromatographically observed peaks with a particular enantiomer. Various aspects of the overall assay methodology have been systematically investigated (derivatization solvents, temperatures, reaction time, and work-up procedure) and optimized on the scale required for trace analysis in biological fluids. Calibration curves were established for each enantiomer in spiked human plasma over the therapeutically relevant concentration range of 0.99-49.94 micrograms/mL.

Chemical Phenomena↗

Capillary zone electrophoresis of some extremely weak bases in acetonitrile.

In water capillary zone electrophoresis cannot be used to investigate basic compounds, which are so weak that their pK(a,HB+) values are less than zero. In acetonitrile the basic strength of such compounds is increased by many orders of magnitude. Accordingly, several extremely weak bases are protonated at low pH in acetonitrile, thus, allowing their investigation by CZE. In this work the CZE separation of thioacetamide, acetamide, thiourea, benzamide, and 4-nitrobenzamide as well as that of N-methylformamide, N,N-dimethylformamide, formamide, and dimethyl sulfoxide is demonstrated in acetonitrile using 10 mmol/L perchloric acid as an electrolyte. The effect of BGE additives, like water and acetic acid, on the CZE performance is discussed. The problem of finding a suitable electroosmotic flow marker at low pH in acetonitrile is addressed, and nitromethane is shown to be a proper marker compound under such extreme conditions. This work demonstrates how organic solvents can enlarge the field of application of CZE.

Journal Article↗

In situ visualization of paclitaxel distribution and release by coherent anti-Stokes Raman scattering microscopy.

Visualization of three-dimensional distribution of drug molecules and subsequent changes during the release process is critical for understanding drug delivery mechanisms as well as designing tailor-made release profiles. This study utilized coherent anti-Stokes Raman scattering (CARS) imaging to examine paclitaxel distribution in various polymer films with lateral resolution of 0.3 microm and depth resolution of 0.9 microm. Raman bands in the CH stretch vibration and fingerprint regions were used to distinguish paclitaxel from the polymers. The detection sensitivity was measured to be 29 mM by imaging paclitaxel molecules dissolved in N,N-dimethylformamide solution. Release of paclitaxel from a polymer matrix was monitored at an acquisition speed of 1 frame/s. Our results show that CARS microscopy can be used effectively for in situ imaging of native drug molecules in a delivery system.

Microscopy↗

Chiral separations by nonaqueous capillary electrophoresis.

This paper reports successful chiral separations of pharmaceutical racemic amines by nonaqueous capillary electrophoresis (NACE) using beta- and gamma-cyclodextrins (CDs) and various derivatives of beta-CDs. The results in three organic solvents, formamide (FA), N-methylformamide (NMF), and N,N-dimethylformamide (DMF) were compared to those in pure water and in 6 M urea in water systems. The binding constants of trimipramine, mianserin, and thioridazine with beta-CD were determined in the following five solvent systems: water, 6 M urea in water, FA, NMF, and DMF. The binding constants decreased systematically from approximately 10(4) in water to approximately 10 in FA and approximately 10(-2) in DMF. As a result, the optimum CD concentration in the aqueous media is in the high micromolar range, while that in the FA is around 100 mM. In the aqueous media, the occurrence of the optimum at very low concentrations and the rapid changes in enantioselectivity with CD concentration would make it difficult to develop methods based on trial and error. Nevertheless, it is shown that, even under nonoptimum concentrations of the chiral selector, other experimental parameters such as ionic strength, addition of tetraalkylammonium (TAA+), and temperature can be adjusted to achieve acceptable resolutions. This, however, is often achieved at the expense of longer analysis times. In addition, the effects of apparent pH (pH*) and type of cyclodextrin on chiral separations in NACE are studied. The application of negatively charged beta-CD in FA is also reported. Chiral separation of trimipramine was achieved at lower concentration of anionic CD due to the additional Coulombic interactions.

Cyclodextrins↗

Inert phosphorescent nanospheres as markers for optical assays.

A simple encapsulation technique is presented to produce highly phosphorescent, inert nanospheres that are suitable luminescent markers. It is based on the coprecipitation of phosphorescent ruthenium(II)-tris(polypyridyl) complexes and polyacrylonitrile (PAN) derivatives from a solution in N,N-dimethylformamide. The beads precipitate in the form of very small aggregates of spherical shape and a typical particle diameter of less than 50 nm. This process allows the encapsulation of phosphorescent and fluorescent dyes in an individual nanosphere provided that they are sufficiently lipophilic. Quenching by oxygen is negligible due to the use of PAN. The nanospheres were characterized with respect to their spectral properties (quantum yields of the luminophores, brightness, luminescence decay time), stability in aqueous buffered suspensions, and in terms of size, shape, and surface charge of the particles, as well as storage stability, quenching by oxygen, and dye leaching.

Acrylic Resins↗

Synthesis and photodynamic activity of novel asymmetrically substituted fluorinated phthalocyanines.

A series of asymmetrically substituted dodecafluorinated phthalocyanines has been synthesized via the Kobayashi ring expansion reaction of the corresponding dodecafluorinated boron subphthalocyanine with differently substituted 1,3-diiminoisoindolines. The mild reaction conditions employed during this ring expansion reaction gave rise exclusively to 3:1 asymmetrically substituted dodecafluorinated phthalocyanines. Metal insertion into the metal-free phthalocyanines was accomplished by heating at 40 degrees C in N,N-dimethylformamide in the presence of zinc bromide. The resulting zinc dodecafluorophthalocyanines were formulated as Cremophor EL oil-water emulsions and evaluated as photosensitizers in vitro against EMT-6 mouse mammary tumor cells. As compared to the previously studied zinc hexadecafluorophthalocyanine, these new asymmetrical zinc dodecafluorophthalocyanines exhibited improved photodynamic activity.

Animals↗

Synthesis and anticoagulant activity of sulfated glucoside-bearing polymer.

Poly(glucosyloxyethyl methacrylate) sulfate [poly(GEMA) sulfate], which contains sulfated glucoside residues, was prepared by the reaction with N,N-dimethylformamide (DMF)/sulfur trioxide (SO3) complex. The degree of sulfation was easily controlled by changing the amount of DMF/SO3 complex added and reaction time. The total human blood clotting time in the presence of poly(GEMA) sulfate was prolonged by increasing the dose or the degree of sulfation of the polymer. The anticoagulant activity of poly(GEMA) sulfate was also compared with that of dextran sulfate, poly(styrenesulfonic acid), poly(vinylsulfuric acid), and heparin. The result suggests that sulfated saccharide residues are essential for endowing anticoagulant activity to synthetic polymer.

Anticoagulants↗

Design, synthesis, and evaluation of mitomycin-tethered phosphorothioate oligodeoxynucleotides.

Mitomycin C (1) is the prototypical bioreductive alkylating agent. Studies have shown that mitomycin C and its derivatives selectively alkylate guanine residues within di- and trinucleotide DNA sequences. This investigation sought to improve the selective DNA bonding properties of the mitomycins by coupling them with antisense oligodeoxynucleotides. Two procedures were developed that allowed the attachment of a phosphorothioate oligodeoxynucleotide containing a hexylamino spacer at the 5' terminus with a C(10)-activated mitomycin. In the first procedure, decarbamoylation of 1 (NaOCH3/ benzene) afforded 10-decarbamoylmitomycin C (10), which was treated with either dimethyl sulfate or methylthiochloroformate and base to yield 10-decarbamoylporfiromycin (11) and N(1a)-[(methylthio)-carbonyl]-10-decarbamoylmitomycin C (12), respectively. Activation of the C(10) site in 11 and 12 with 1,1'-carbonyldiimidazole or with 1,1'-thiocarbonyldiimidazole provided the N(1a)-substituted mitomycin 10-decarbamoyl-10-O-carbonylimidazoles (5, 7) and 10-decarbamoyl-10-O-thiocarbonylimidazoles (6, 8), respectively. Compounds 5-8 were reacted with glycine methyl ester hydrochloride (17) and base in both methylene chloride and aqueous buffered solutions to determine the ease and efficiency in which these C(10)-activated mitomycin derivatives coupled to amines. It was found that 5-8 all reacted with 17 in methylene chloride to give the coupled products 18-21 but that improved amine coupling yields in water were observed for the 10-decarbamoyl-10-O-thiocarbonylimidazoles 6 and 8 as compared with the 10-decarbamoyl-10-O-carbonylimidazoles 5 and 7. This finding led to the coupling of the phosphorothioate oligodeoxynucleotide, H2N(CH2)6-P(S)(OH)-GGCCCCGTG-GTGGCTCCAT (22) to 8. Compound 22 complemented a 19-base sequence in the translation initiation region of the human A-raf-1 gene. Use of excess 8 (28 equiv) with 22 gave only a 36% yield of the coupled product 23, which proved difficult to separate from 22. In the second procedure, phosphorothioate oligodexynucleotides that contained a hexylamino spacer at the 5'termini were coupled to 10-des(carbamoyloxy)-10-isothiocyanatoporfiromycin (9). Compound 9 was prepared in four steps from 11. Mesylation (methanesulfonyl chloride/pyridine) of 11 gave the C(10) mesylate 13, which was then treated with NaN3 (dimethylformamide, 90 degrees C) to give 10-des(carbamoyloxy)-10-azidoporfiromycin (14). Catalytic reduction (PtO2, H2) of 14 in pyridine afforded C(10) amine 15. Treatment of 15 with di-2-pyridyl thionocarbonate provided the desired 10-des(carbamoyloxy)-10-isothiocyanatoporfiromycin (9). Compound 9 readily coupled with 17 and base in both methylene chloride and aqueous buffered solutions to give 25. Use of the 5'hexylaminophosphorothioate oligodeoxynucleotides 32-35 in place of 17 gave the conjugated adducts 28-31, respectively, in a 12% to near-quantitative yield. The products were purified by semipreparative HPLC. Antisense agents 28-31 were designed to target a 30-base-long region from the coding region of the human FGFR1 gene. One adduct, 29, reduced the number of FGFR1 receptors in human aortic smooth cells for bFGF on the cell surface, which suggested down-regulation of FGFR1 gene expression. Further, 29 inhibited cultured human aortic smooth muscle cell proliferation and was less cytotoxic than porfiromycin (2). The biological assay data suggest that the phosphorothioate oligodexynucleotide porfiromycin conjugates may be more target selective and less toxic than either mitomycin or porfiromycin and thus be promising therapeutic agents.

Chromatography, High Pressure Liquid↗

Fluorescence characterization of structural transitions at the strong actin binding motif in skeletal myosin affinity labeled at cysteine 540 with novel spectroscopic cysteaminyl mixed disulfides.

We have synthesized the luminescent and fluorescent lanthanide chelate S-(2-nitro-5-thiobenzoic acid)cysteaminyldiethylenetriaminepentaacetate-5-[(2-aminoethyl)am ino ]naphthalene-1-sulfonic acid as well as the fluorescent analogue S-(2-nitro-5-thiobenzoic acid)cysteaminyl-5-carboxyfluorescein using the procedure we recently described [Bertrand, R., Capony, J.-P., Derancourt, J., and Kassab, R. (1999) Biochemistry 38, 11914-11925]. Both mixed disulfides react with the skeletal myosin motor domain (S-1) as actin site-directed agents and label exclusively and stoichiometrically Cys 540 in the hydrophobic strong actin binding helix-loop-helix motif, causing only a 1.9-2.4-fold decrease in the V(max) for acto-S-1 ATPase. The covalently attached cysteaminyl probe side chain spans maximally 17 and 8 A, respectively, and the fluorophores have different polarity, volume, and flexibility. Thus, they may provide complementary spectroscopic information on the environmental properties of this critical actin binding region. Here, we have analyzed by extrinsic fluorescence spectroscopy S-1 derivatized with the fluorescein label or with the Tb(3+) or Eu(3+) chelate of the other label to assess the conformational transitions precisely occurring at this site upon interaction with F-actin, nucleotides, or phosphate analogues. For either label, specific spectral changes of significant amplitude were obtained, identifying at least two major structural states. One was mediated by rigor binding of F-actin in the absence or presence of MgADP. It was abolished by MgATP, and it was not produced by the binding of nonpolymerizable G-actin. A modeling of the corresponding changes in the intensity and lambda(max) of the fluorescence emission spectra, achieved using the fluorescent adducts of 2-mercaptoethanol in varying concentrations of dimethylformamide, illustrates the predicted apolar nature of the strong acto-S-1 interface. A second state was promoted by the binding of ATP, AMP-PNP, ADP.AlF4, ADP. BeFx, or PP(i). It should be prevalent in the weak acto-S-1 binding complexes. The accompanying fluorescence intensity reduction, observed with each label, in both the absence and presence of F-actin, would result from a specific modification by these ligands of the probe orientation and/or solvent accessibility as suggested by acrylamide quenching experiments. It could represent the spectral manifestation of the predicted allosteric linkage from the ATPase site to the strong actin binding site of S-1 that modulates the acto-S-1 affinity. Our study offers the basis necessary for further detailed spectroscopic investigations on the conformational dynamics in solution of the stereospecific and hydrophobic actin binding motif during the skeletal cross-bridge cycle.

Actins↗

Probing structure and dynamics of DNA with 2-aminopurine: effects of local environment on fluorescence.

2-Aminopurine (2AP) is an analogue of adenine that has been utilized widely as a fluorescence probe of protein-induced local conformational changes in DNA. Within a DNA strand, this fluorophore demonstrates characteristic decreases in quantum yield and emission decay lifetime that vary sensitively with base sequence, temperature, and helix conformation but that are accompanied by only small changes in emission wavelength. However, the molecular interactions that give rise to these spectroscopic changes have not been established. To develop a molecular model for interpreting the fluorescence measurements, we have investigated the effects of environmental polarity, hydrogen bonding, and the purine and pyrimidine bases of DNA on the emission energy, quantum yield, and intensity decay kinetics of 2AP in simple model systems. The effects of environmental polarity were examined in a series of solvents of varying dielectric constant, and hydrogen bonding was investigated in binary mixtures of water with 1,4-dioxane or N,N-dimethylformamide (DMF). The effects of the purine and pyrimidine bases were studied by titrating 2AP deoxyriboside (d2AP) with the nucleosides adenosine (rA), cytidine (rC), guanosine (rG), and deoxythymidine (dT), and the nucleoside triphosphates ATP and GTP in neutral aqueous solution. The nucleosides and NTPs each quench the fluorescence of d2AP by a combination of static (affecting only the quantum yield) and dynamic (affecting both the quantum yield and the lifetime, proportionately) mechanisms. The peak wavelength and shape of the emission spectrum are not altered by either of these effects. The static quenching is saturable and has half-maximal effect at approximately 20 mM nucleoside or NTP, consistent with an aromatic stacking interaction. The rate constant for dynamic quenching is near the diffusion limit for collisional interaction (k(q) approximately 2 x 10(9) M(-1) s(-1)). Neither of these effects varies significantly between the various nucleosides and NTPs studied. In contrast, hydrogen bonding with water was observed to have a negligible effect on the emission wavelength, fluorescence quantum yield, or lifetime of 2AP in either dioxane or DMF. In nonpolar solvents, the fluorescence lifetime and quantum yield decrease dramatically, accompanied by significant shifts in the emission spectrum to shorter wavelengths. However, these effects of polarity do not coincide with the observed emission wavelength-independent quenching of 2AP fluorescence in DNA. Therefore, we conclude that the fluorescence quenching of 2AP in DNA arises from base stacking and collisions with neighboring bases only but is insensitive to base-pairing or other hydrogen bonding interactions. These results implicate both structural and dynamic properties of DNA in quenching of 2AP and constitute a simple model within which the fluorescence changes induced by protein-DNA binding or other perturbations may be interpreted.

2-Aminopurine↗

Estrogenicity of coumestrol in the mouse: fluorescence detection of interaction with estrogen receptors.

The estrogenicity of coumestrol, a fluorescent phytoestrogen, has been examined in murine uteri. Coumestrol competed with 17 beta-[3H]estradiol for binding to cytoplasmic estrogen receptors, caused cytoplasmic estrogen receptors to associate with chromatin in the nucleus, and induced progesterone receptors. By use of size-exclusion high-performance liquid chromatography (SEHPLC), the interaction of coumestrol with estrogen receptors was examined directly by monitoring the fluorescence associated with macromolecules having properties characteristic of estrogen receptors. These analyses were made possible by the addition of dimethylformamide to the elution buffer, at a concentration (7.5%) which improved recoveries but did not interfere with estrogen receptor binding. It was possible to detect fluorescent coumestrol at approximately 0.5 nM. All determinations were performed with preparations in which estrogen receptor activity was 3-10 nM. Exposure of these preparations to coumestrol (50 nM) resulted in the elution of increased fluorescent activity in the regions where estrogen receptors eluted during SEHPLC. This fluorescent activity was reduced when diethylstilbestrol, 17 beta-estradiol, hexestrol, or tamoxifen was present as a competitor (2 microM) but was unaffected by testosterone or progesterone. Diethylstilbestrol reduced fluorescence below endogenous base lines and thereby displayed a fluorescence quench property which was not observed with other ligands. When hepatic and renal estrogen receptor preparations were used, the injected receptor activity was observed to be the major limiting factor in detecting the interaction of coumestrol with estrogen receptors. These observations are relevant to attempts to visualize estrogen receptors in tumor cells and demonstrate that accepted biochemical criteria for ligand-receptor interaction can be satisfied when fluorescent ligands are examined.

Animals↗

Solvent effects on the stability of A7U7p.

The thermodynamics of double-helix formation were measured spectrophotometrically for A7U7 in water at 1 M NaCl and for A7U7p in a variety of solvent mixtures and salt. Comparison of the A7U7 results with calorimetric measurements indicates duplex formation involves intermediate states. For A7U7p between 0.06 and 0.55 M Na+, dTm/d(log [Na+]) = 17.4 degrees C, similar to the value of 19.6 degrees C for poly-(A).poly(U) [Krakauer, H., & Sturtevant, J. M. (1968) Biopolymers 6, 491-512]. At 1 M NaCl, the A7U7p duplex is most stable in 100% water. For 10 mol % solutions, the order for A7U7p duplex stability is ethylene glycol greater than glycerol greater than ethanol greater than 2-propanol greater than dimethyl sulfoxide greater than 1-propanol greater than formamide greater than N,N-dimethylformamide greater than urea greater than dioxane. Comparison of changes in stability and thermodynamic parameters with literature results for proteins suggests proteins and A7U7p interact differently with solvent. The results suggest hydrophobic bonding is not a major contributor to the stability of the A7U7p duplex. Comparisons with bulk solvent surface tension suggest the energy of cavity formation is also not a major contributor to duplex stability.

Calorimetry↗

Synthesis and biological properties of 5-azido-2'-deoxyuridine 5'-triphosphate, a photoactive nucleotide suitable for making light-sensitive DNA.

A photoactive nucleotide analogue of dUTP, 5-azido-2'-deoxyuridine 5'-triphosphate (5-N3dUTP), was synthesized from dUMP in five steps. The key reaction in the synthesis of 5-N3dUTP is the nitration of dUMP in 98% yield in 5 min at 25 degrees C using an excess of nitrosonium tetrafluoroborate in anhydrous dimethylformamide. Reduction of the resulting 5-nitro compound with zinc and 20 mM HCl gave 5-aminodeoxyuridine monophosphate (5-NH2dUMP). Diazotization of 5-NH2dUMP with HNO2 followed by the addition of NaN3 to the acidic diazonium salt solution gave a photoactive nucleotide derivative in 80-90% yield. The monophosphate product was identified as 5-N3dUMP by proton NMR, UV, IR, and chromatographic analysis as well as by the mode of synthesis and its photosensitivity. After formation of 5-N3dUTP through a chemical coupling of pyrophosphate to 5-N3dUMP, the triphosphate form of the nucleotide was found to support DNA synthesis by Escherichia coli DNA polymerase I at a rate indistinguishable from that supported by dTTP. When UMP was used as the starting compound, 5-N3UTP was formed in an analogous fashion with similar yields and produced a photoactive nucleotide which is a substrate for E. coli RNA polymerase. To prepare [gamma-32P]-5-N3dUTP for use as an active-site-directed photoaffinity labeling reagent, a simple method of preparing gamma-32P-labeled pyrimidine nucleotides was developed. [gamma-32P]-5-N3dUTP is an effective photoaffinity labeling reagent for DNA polymerase I and was found to bind to the active site with a 2-fold higher affinity than dTTP.(ABSTRACT TRUNCATED AT 250 WORDS)

Affinity Labels↗

Reversible unfolding of the gelatin-binding domain of fibronectin: structural stability in relation to function.

Fibronectin, a large multidomain glycoprotein, binds denatured collagen (gelatin) and mediates cell attachment and spreading on collagen-coated surfaces. Despite the high affinity, binding to gelatin is disrupted by relatively mild conditions. We have examined the effects of denaturants on the structure and function of a 42-kDa gelatin-binding fragment (GBF) isolated from chymotryptic and thermolytic digests of the parent protein. Application of linear gradients to GBF-loaded gelatin-agarose columns resulted in peak elution of the fragment at pH 5.2 or 10.2, at 0.4 M dimethylformamide, 0.9 M GdmCl, or 2.0 M urea, conditions far short of those required to induce structural changes detectable by fluorescence or circular dichroism. Solvent perturbation, fluorescence quenching, and chemical modification experiments indicate that about half of the 8 tryptophans, one-third of the 21 tyrosines, and all of the 9 lysine residues are solvent-exposed in the native protein and that 1 or more of the latter are directly involved in binding to gelatin, most likely through a hydrogen-bonding mechanism. Titration with GdmCl produced a single unfolding transition centered near 2.5 M GdmCl as monitored by changes in fluorescence and circular dichroism. This transition was fully reversible with complete recovery of structural parameters and gelatin binding. Treatment with disulfide reducing agents caused rapid irreversible changes in structure similar to those produced by GdmCl with concomitant loss of gelatin binding. Thus, tertiary and secondary structures are important for binding, but binding can be disrupted without perturbing those structures.

Animals↗

Ultraviolet resonance Raman spectroscopy of distamycin complexes with poly(dA)-poly(dT) and poly(dA-dT): role of H-bonding.

Raman spectra are reported for distamycin, excited at 320 nm, in resonance with the first strong absorption band of the chromophore. Qualitative band assignments to pyrrole ring and amide modes are made on the basis of frequency shifts observed in D2O. When distamycin is dissolved in dimethyl sulfoxide or dimethylformamide, large (30 cm-1) upshifts are seen for the band assigned to amide I, while amides II and III shift down appreciably. Similar but smaller shifts are seen when distamycin is bound to poly(dA-dT) and poly(dA)-poly(dT). Examination of literature data for N-methylacetamide in various solvents shows that the amide I frequencies correlate well with solvent acceptor number but poorly with solvent donor number. This behavior implies that acceptor interactions with the C = O group are more important than donor interactions with the N-H group in polarizing the amide bond and stabilizing the zwitterionic resonance form. The resonance Raman spectra therefore imply that the distamycin C = O groups, despite being exposed to solvent, are less strongly H-bonded in the polynucleotide complexes than in aqueous distamycin, perhaps because of orienting influences of the nearby backbone phosphate groups. In this respect, the poly(dA-dT) and poly(dA)-poly(dT) complexes are the same, showing the same RR frequencies. Resonance Raman spectra were also obtained at 200-nm excitation, where modes of the DNA residues are enhanced. The spectra were essentially the same with and without distamycin, except for a perceptable narrowing of the adenine modes of poly(dA-dT), suggesting a reduction in conformational flexibility of the polymer upon drug binding.

Binding Sites↗

A new method for extraction of iron-molybdenum cofactor (FeMoco) from nitrogenase adsorbed to DEAE-cellulose. 2. Solubilization of FeMoco in a wide range of organic solvents.

While the iron-molybdenum cofactor (FeMoco) of nitrogenase, a constituent of the active site for nitrogen reduction, can be extracted into N-methylformamide (NMF) and pyrrollidinone, the inability to solubilize it in any other organic solvents has hampered further understanding of its structure and chemical properties. A method to solubilize FeMoco, prepared in N,N-dimethylformamide (DMF) with Bu4N+ as counterion [McLean, P. A., Wink, D. A., Chapman, S. K., Hickman, A. B., McKillop, D. M., & Orme-Johnson, W. H. (1989) Biochemistry (preceding paper in this issue)], in acetonitrile, acetone, methylene chloride, tetrahydrofuran, and benzene is reported. FeMoco evaporated to dryness in vacuo dissolves readily in good yield (55-100%) and with no significant loss in specific activity. In addition, FeMoco can be extracted directly into these solvents from MoFe protein bound to a DEAE-Sepharose column if the protein is pretreated with DMF. Methods have also been developed to extract fully active FeMoco into acetone and acetonitrile in the absence of any amide solvents (NMF or DMF). Extraction of FeMoco into acetone (30% yield) involves only pretreatment of column-bound protein with methanol, while extraction into acetonitrile (22% yield) requires pretreatment with methanol followed by THF. We conclude that the presence of a suitable soluble cation confers solubility to the cofactor in many common organic solvents and that the solubility of FeMoco in a given solvent may be independent of the ability of that solvent to extract the cofactor from column-bound protein.

Chromatography, DEAE-Cellulose↗

Synthesis of dicytidylyl-(3'-5')-1,2-di(adenosin-N6-yl)ethane and dicytidylyl-(3'-5')-1,4-di(adenosin-N6-yl)butane: covalently joined terminals of two transfer ribonucleic acids and their behavior toward snake venom phosphodiesterase.

The chemical synthesis of the tital bridged trinucleoside diphosphates 3e and 3f along with the corresponding dinucleoside phosphates 3c and 3d is described. Bridged nucleosides 3a and 3b gave on treatment with triethyl orthoformate in the presence of p-toluenesulfonic acid in dimethylformamide the cyclic orthoesters 2a and 2b. Condensation of 2a and 2b with N,2',5'-O-triacetylcytidine 3'-phosphate (1) using dicyclohexylcarbodiimide in pyridine afforded after deblocking and chromatographic separation products 3c-f. The latter were readily degraded with pancreatic RNase, but 3c and 3e were completely resistant toward snake venom phosphodiesterase whereas 3d and 3f were digested to the extent of 65 and 43%, respectively. The major product of degradation of 3f with phosphodiesterase was compound 3d resulting from the combined action of phosphodiesterase and contaminating phosphomonoesterase. The results are explained in terms of stacking of terminal bridge nucleoside units in 3c-f. The implications of these findings for the function of snake venom phosphodiesterase are discussed.

Models, Molecular↗

Synthesis and properties of carbonylbis(methionyl)insulin, a proinsulin analogue which is convertible to insulin by cyanogen bromide cleavage.

The preparation and use of carbonylbis (L-methionine p-nitrophenyl ester) as a reversible cross-linking reagent for insulin are described. The reaction of 1 equiv of reagent with zinc insulin in dimethylformamide in the presence of triethylamine yields as one of the products NalphaA1, NepsilonB29-carbonylbis(methionyl)insulin, (CBM-insulin). The CBM-insulin was characterized by end group analysis and by the products formed on tryptic and chymotryptic cleavage. It possessed 91% of the immunological and 6.5% of the hormonal activity of insulin. Treatment of CBM-insulin with cyanogen bromide (CNBr) in 70% formic acid for 1 h resulted in nearly complete removal of the methionine bridge to yield insulin. A small amount of a side product was removed on DEAE-cellulose at pH 7.2 to give an overall recovery of insulin of 70-80%. Oxidative sulfitolyses of CBM-insulin gave the hexa(S-sulfonate) which was reduced with dithiothreitol to yield reduced CBM-insulin. The latter compound, containing 6 sulfhydryls, exhibited a pH-dependent circular dichroic spectrum. The form at pH 10 exhibited a spectrum typical of random coil which was converted to a form at pH 7.8 which was characterized by a negative extremum at 213 nm. The change in the spectrum at 213 nm with pH was characterized by an apparent pKa of 8.5. Studies on the reoxidation of reduced CBM-insulin were performed at pH values between 7.8 and 10 and at protein concentrations of 0.01-1 mg/ml. The best yields (ca. 85%) of the correctly paired disulfide bonds were obtained in reoxidations at pH 9.5-10 at protein concentration of 0.01-0.1 mg/ml. CBM-insulin, which had been isolated from reoxidation at high pH of the reduced CBM-insulin, was cleaved by CNBr to yield a fully active insulin in an overall yield of 60% from the reduced CBM-insulin.

Adipose Tissue↗