Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Stability analysis”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68Linked to original sources

[Inflammatory markers of atherosclerotic plaque stabilization after acute coronary event--temporal trends].

OBJECTIVE: To evaluate the length of time required for atherosclerotic plaque stabilization in acute coronary syndromes (ACS), using inflammatory markers. METHODS: In this prospective study, C-reactive protein (CRP), fibrinogen, factor VIIIc, interleukin-6 (IL-6), and tumor necrosis factor-alpha (TNF-alpha) levels were measured on admission, at discharge, and three and six months post-discharge in 40 patients with non-ST-segment elevation ACS (NSTE-ACS) and 40 healthy subjects. RESULTS: C-reactive protein levels were significantly higher on admission and at discharge, but not at three and six months post-discharge, compared with the control group. Fibrinogen levels remained unchanged, except at six months, when they were significantly lower than in the control group. Factor VIII-c did not differ from that of the control group on admission, but it was significantly higher at discharge, with no differences at three and six months. Interleukin-6 levels were significantly higher than in the control group in all time points. However, they declined significantly between discharge and three months. In no time point was TNF-alpha significantly different from that of the control group. Only IL-6 correlated significantly and independently with future cardiovascular events. CONCLUSION: With respect to CRP and factor VIIIc, plaque stabilization is suggested in up to three months; IL-6 analysis suggests stabilization as from the third month, although it remained higher than that of the control group for up to six months. Only IL-6 showed prognostic value for further events within a year.

Age Distribution↗

Surface forces in lungs. II. Microstructural mechanics and lung stability.

Recent lung microstructural models describing interactions between alveolar surface tension (gamma) and forces in structural elements of the alveolar duct predict that the component of lung recoil pressure due to gamma (P gamma) is proportional to gamma/V1/3, where V is the total lung volume. This relation is tested against experimental data obtained from pressure-volume measurements of excised rabbit lungs with different constant values of gamma. It is found that for values of gamma less than approximately 18 dyn/cm the data generally agree with the model predictions. With higher values of gamma, a mismatch between the data and predictions first occurs at low and high volumes and then spreads over the entire volume range. The mismatch at the lower volumes coincides with the appearance of nonuniformities of lung expansion. The nonuniformities are characterized by a coexistence of under- and overexpanded regions of the parenchyma referred to as a mixture of phases. These nonuniformities, as well as a pressure-volume curve with a shape similar to the shape of measured curves, are predicted from an analysis of lung stability. Results of this work indicate that if the lung expands uniformly, P gamma proportional to gamma/V1/3 is a good approximation over a wide range of volumes. The stability analysis indicates that the equilibrium configurations of the lung parenchyma when gamma is independent of interfacial area and elevated above normal values are nonuniform states of expansion, characterizable as a mixture of phases. This result confirms that a dependence of gamma on surface area is normally required to achieve stable, uniform states of lung expansion.

Animals↗

Adolescent personality: a five-factor model construct validation.

The purpose of this study was to investigate convergent and discriminant validity of the five-factor model of adolescent personality in a school setting using three different raters (methods): self-ratings, peer ratings, and teacher ratings. The authors investigated validity through a multitrait-multimethod matrix and a confirmatory factor analysis correlated trait, uncorrelated method model. With the exception of Emotional Stability, each analysis demonstrated similar patterns and together provided support for the convergent and discriminant validity of the five-factor model structure of adolescent personality. However, among the three raters, self-ratings of personality provided a comparatively weaker method for assessing adolescent personality. The influences of agreement between self and other raters are discussed in relation to contrast, perceiver, and target effects; expert observer effects; the degree of acquaintanceship; and the effect of the social context.

Adolescent↗

The use of dynamic interventional MRI in developmental dysplasia of the hip.

Conventional methods of imaging in the investigation of developmental dysplasia of the hip all have disadvantages, either in definition or in exposure to radiation. We describe a new open-configuration MR scanner which is unique in that it allows anaesthesia and access to the patient within the imaging volume for surgical procedures and application of casts. We performed 13 scans in eight anaesthetised infants. Dynamic imaging revealed two dislocated hips which were then visualised during reduction. Hip spicas were applied without removing the patient from the scanner. In one hip, an adductor tenotomy was carried out. In all patients, stressing the hips during dynamic imaging allowed an assessment of stability. This was particularly useful in two hips in which an analysis of stability in different positions facilitated the planning of femoral osteotomies. This method of imaging provides new and important information. It has great potential in the investigation of developmental dysplasia of the hip and, with ultrasound, may allow management without the need for radiography.

Anesthesia, General↗

Substituent effects on structural stability of formyl ketene and analysis of vibrational spectra of formyl haloketenes and formyl methylketene.

The conformational behavior and the structural stability of formyl fluoroketene, formyl chloroketene and formyl methylketene were investigated by utilizing quantum mechanical DFT calculations at B3LYP/6-31I + + G** and ab initio calculations at MP2/6-311 + + G** levels. The three molecules were predicted to have a planar s-cis<-->s-trans conformational equilibrium. From the calculations, the direction of the conformational equilibrium was found to be dependent on the nature of the substituting group. In formyl haloketenes, the cis conformation, where the C=O group eclipses the ketenic group, was expected to be of lower energy than the trans conformer. In the case of formyl methylketene the conformational stability was reversed and the trans form (the aldehydic hydrogen eclipsing the ketenic group) was calculated to be about 2 kcal mol(-1) lower in energy than the cis form. The calculated cis-trans energy barrier was found to be in the order: fluoride (15.3 kcal mol(-1)) > chloride (13.1 kcal mol(-1)) > methyl (11.7 kcal mol(-1). Full optimization was performed at the ground and the transition states of the molecules. The vibrational frequencies for the stable conformers of the three ketenic systems were computed at the DFT-B3LYP level, and the zero-point corrections were included into the calculated rotational barriers. Complete vibrational assignments were made on the basis of both normal coordinate calculations and comparison with experimental results of similar molecules.

Carbon↗

Theoretical analysis of factors affecting the formation and stability of multilayered colloidal dispersions.

A mathematical analysis of the major factors influencing the formation and stability of colloidal dispersions containing spherical particles surrounded by multilayered polymeric interfacial membranes formed by the layer-by-layer electrostatic deposition technique is carried out. The mathematical model assumes that (i) the colloidal dispersion initially consists of a mixture of electrically charged monodisperse spherical particles and oppositely charged polymer molecules, (ii) the adsorption of polymer molecules to the particle surfaces is diffusion-limited, and (iii) the dominant particle-particle collision mechanism is Brownian motion. This approach was used to produce stability maps that highlight conditions under which bridging flocculation, multilayer formation, or depletion flocculation occurs. The stability maps are derived from calculations of the critical polymer concentrations required to (i) saturate the particle surfaces (C(Sat)), (ii) ensure that polymer adsorption is faster than particle collisions (C(Ads)), and (iii) promote depletion flocculation (C(Dep)). In addition, the influence of interfacial properties on the stability of multilayer colloidal dispersions was assessed by calculating the colloidal interactions between the coated particles (i.e., van der Waals, electrostatic, steric, and depletion). These calculations indicated that the major factors are the interfacial charge and composition rather than the interfacial thickness. This article provides useful insights into the factors affecting the formation of stable multilayer colloidal dispersions.

Adsorption↗

Ultra-performance liquid chromatography coupled to time-of-flight mass spectrometry for robust, high-throughput quantitative analysis of an automated metabolic stability assay, with simultaneous determination of metabolic data.

The application of ultra-performance liquid chromatography coupled to time-of-flight mass spectrometry (UPLC/TOFMS) for high-throughput analysis of a 96-well plate based metabolic stability assay has been investigated. Full-scan data were acquired, with run times of 2.5-3.5 min, from which narrow window extracted ion chromatograms were generated, producing quantitative data for the test compound equivalent to that obtained by high-performance liquid chromatography with tandem mass spectrometric detection on a triple quadrupole instrument (HPLC/MS/MS). Sensitivity and mass accuracy were maintained over the analysis of >300 samples. Additionally, the UPLC/TOFMS datasets obtained gave access to metabolic route information, at no cost in terms of sensitivity for the test compound.

Animals↗

DORSSAA: Drug-Target interactOmics Resource Based on Stability/Solubility Alteration Assay.

Advancements in high-throughput techniques such as Thermal Proteome Profiling and the high-throughput Proteome Integral Solubility Alteration assay have revolutionized our understanding of drug-protein interactions. Despite these innovations, the absence of an integrative platform for cross-study analysis of stability and solubility alteration data represents a significant bottleneck. To address this gap, we introduce Drug-target interactOmics Resource based on Stability/Solubility Alteration Assay (DORSSAA), an interactive and expandable web-based platform for the systematic analysis and visualization of proteome stability and solubility alteration assay datasets. Currently, DORSSAA features 1,135,985 records spanning 38 cell lines and organisms, 135 compounds, and 40,742 protein targets. Through its user-friendly interface, the resource supports comparative drug-protein interaction analysis and facilitates the discovery of actionable therapeutic targets. Through two case studies, methotrexate target profiling in A549 cells and combinatorial-therapy drug-target interactions in leukemia cell lines, we demonstrate DORSSAA's utility for identifying protein-drug interactions across diverse experimental contexts. This resource empowers researchers to accelerate drug discovery and enhance our understanding of protein behavior. Compared with data repositories and interaction databases, DORSSAA provides direct protein-level evidence of mechanisms of action with strict statistical control for each study. This enables more reliable identification of drug targets, off-target effects, and potential drug combinations.

Humans↗

Molecular diagnostics of cancer predisposition: hereditary non-polyposis colorectal carcinoma and mismatch repair defects.

Hereditary non-polyposis colorectal carcinoma accounts for 5-13% of all colorectal carcinomas and is inherited in a dominant fashion. Two different forms can be distinguished. Type I is restricted to colorectal cancers, whereas type II patients acquire acolorectal, endometrial, gastric, small intestinal and transitional carcinomas of the upper urinary tract. Germline mutations in the human mismatch repair genes (hMSH2, hMSH6, hMLH1, hPMS2) account for the majority of hereditary non-polyposis colorectal carcinoma. As a result of the mismatch repair deficiency, replication errors are not repaired, resulting in a mutator phenotype. Simple repetitive sequences (microsatellites) are especially prone to replication errors and analysis of their stability combined with immunohistochemical analysis of mismatch repair protein expression provides a rapid diagnostic strategy. For patients either (1) fulfilling the Amsterdam criteria for HNPCC, (2) with synchronous or metachronous hereditary non-polyposis colorectal carcinoma-related tumors, (3) with hereditary non-polyposis colorectal carcinoma-related tumors before the age of 45 and/or (4) with right sided CRC and mucinous, solid, or cribriform growth patterns, screening for mismatch repair deficiencies should be performed. The identification of colorectal cancers displaying a mutator phenotype has implications for both treatment and prognosis.

Adaptor Proteins, Signal Transducing↗

Construction of stabilized proteins by combinatorial consensus mutagenesis.

We constructed stabilized variants of beta-lactamase (BLA) from Enterobacter cloacae by combinatorial recruitment of consensus mutations. By aligning the sequences of 38 BLA homologs, we identified 29 positions where the E.cloacae gene differs from the consensus sequence of lactamases and constructed combinatorial libraries using mixtures of mutagenic oligonucleotides encompassing all 29 positions. Screening of 90 random isolates from these libraries identified 15 variants with significantly increased thermostability. The stability of these isolates suggest that all tested mutations make additive contributions to protein stability. A statistical analysis of sequence and stability data identified 11 mutations that made stabilizing contributions and eight mutations that destabilized the protein. A second-generation library recombining these 11 stabilizing mutations led to the identification of BLA variants that showed further stabilization. The most stable variant had a mid-point of thermal denaturation (Tm) that was 9.1 degrees C higher than the starting molecule and contained eight consensus mutations. Incubation of three stabilized BLA variants with several proteases showed that all tested isolates have significantly increased resistance to proteolysis. Our data demonstrate that combinatorial consensus mutagenesis (CCM) allows the rapid generation of protein variants with improved thermal and proteolytic stability.

Amino Acid Sequence↗

The stability of the cemented tibial component of total knee arthroplasty: posterior cruciate-retaining versus posterior-stabilized design.

Micromotion of the tibial component in 40 knee arthroplasties for gonarthrosis was studied using Roentgen stereophotogrammetric analysis. The stability of this component was assessed for 2 years' postoperatively. In all arthroplasties, an attempt was made to reconstruct the preoperative posterior slope. Posterior cruciate-retaining (CR) and posterior-stabilized (PS) components showed at 2 years a maximum total point motion of 0.6 +/- 0.4 mm and 0.7 +/- 0.5 mm, respectively. Whereas 92.5% of the implants were determined to be stable, 1 of the CR group and 2 of the PS group displayed migration between the first and the second year of at least 0.2 mm. A negative correlation between subsidence of the tibial component at 2 years of follow-up and the difference between preoperative and postoperative tibial slope was found. Consequently, we suggest that restoring the original posterior slope of the tibial plateau must be a goal of tibial component implantation.

Aged↗

HPLC analysis of underivatized fatty acids in margarines.

The composition of the underivatized fatty acids in margarines was determined by high performance liquid chromatography (HPLC). A 50-min analysis gave not only the distribution of the cis- and trans-isomers of the 18 carbon-length, but also a quantitative measure of seven of the underivatized fatty acids studied. High concentrations of the essential fatty acid, linoleic acid, were found in the four margarine samples. Results of the quantitation, reproducability of the HPLC analysis, and stability of the standards are discussed. It was found that the developed HPLC analysis was able to adequately separate the geometric isomers, linoleic acid (18:2 delta 9c, 12c) from linolelaidic acid (18:2 delta 9t, 12t). However, a mixture of the other two isomers, 18:2 delta 9c, 12t and 18:2 delta 9c, 12c coeluted together between the peaks due to the 18:2 delta 9c, 12c and 18:2 delta 9t, 12t isomers. This study did not attempt to separate the various positional isomers of underivatized fatty acids.

Chromatography, High Pressure Liquid↗

Water-soluble vitamins.

Simultaneous Determination of Vitamins.--Klejdus et al. described a simultaneous determination of 10 water- and 10 fat-soluble vitamins in pharmaceutical preparations by liquid chromatography-diode-array detection (LC-DAD). A combined isocratic and linear gradient allowed separation of vitamins in 3 distinct groups: polar, low-polar, and nonpolar. The method was applied to pharmaceutical preparations, fortified powdered drinks, and food samples, for which results were in good agreement with values claimed. Heudi et al. described a separation of 9 water-soluble vitamins by LC-UV. The method was applied for the quantification of vitamins in polyvitaminated premixes used for the fortification of infant nutrition products. The repeatability of the method was evaluated at different concentration levels and coefficients of variation were <6.5%. The concentrations of vitamins found in premixes with the method were comparable to the values declared. A disadvantage of the methods mentioned above is that sample composition has to be known in advance. According to European legislation, for example, foods might be fortified with riboflavin phosphate or thiamin phosphate, vitamers which are not included in the simultaneous separations described. Vitamin B2.--Viñas et al. elaborated an LC analysis of riboflavin vitamers in foods. Vitamin B2 can be found in nature as the free riboflavin, but in most biological materials it occurs predominantly in the form of 2 coenzymes, flavin mononucleotide (FMN) and flavin-adenine dinucleotide (FAD). Several methods usually involve the conversion of these coenzymes into free riboflavin before quantification of total riboflavin. According to the authors, there is growing interest to know flavin composition of foods. The described method separates the individual vitamers isocratically. Accuracy of the method is tested with 2 certified reference materials (CRMs). Vitamin B5.-Methods for the determination of vitamin B5 in foods are limited because of their low sensitivity and poor selectivity. Pakin et al. proposed a post-column derivatization of pantothenic acid as a fluorescent compound and used this principle in a specific and sensitive method for the determination of free and bound pantothenic acid in a large variety of foods. A French laboratory invited European laboratories to participate in a series of collaborative studies for this method, which will be carried out in 2005/2006. A more sophisticated method was described by Mittermayer et al. They developed an LC-mass spectrometry (LC/MS) method for the determination of vitamin B5 in a wide range of fortified food products. Application of the method to various samples showed consistent results with those obtained by microbiology. Vitamin B6.-Method 2004.07, an LC method for the analysis of vitamin B6 in reconstituted infant formula, was published by Mann et al. In contrast with this method, which quantifies vitamin B6 after converting the phosphorylated and free vitamers into pyridoxine, Viñas et al. published an LC method which determines 6 vitamin B6 related compounds, the 3 B6 vitamers, their corresponding phosphorylated esters, and a metabolite. Accuracy was determined using 2 CRMs. Results were within the certified ranges. Vitamin C.-Franke et al. described an extensive study to vitamin C and flavonoid levels of fruits and vegetables consumed in Hawaii. Vitamin C was determined by measuring ascorbic acid in its reduced state by LC and coulometric detection along with UV absorbance detection at 245 nm. No attempts were made to assess levels of dehydroascorbic acid. Most recent research revealed that cell uptake of dehydroascorbic acid is unlikely to play a major role, which may explain the very low vitamin C activity of orally administered L-dehydroascorbic acid in rats. The food levels found by Franke et al. are variably lower, higher, or equal in comparison to other studies. Iwase described a method for the determination of ascorbic acid in foods using L-methionine for the pre-analysis sample stabilization. Electrochemical detection was used for the quantification. Traditionally, metaphosphoric acid was proven to be a useful dissolving agent for the determination of ascorbic acid. However, it dissolves in water very slowly, it is hygroscopic, and accurate weighing is not easy. Adjustment at pH 2-3 takes a long time. It appeared to be possible to replace metaphosphoric acid by 0.2% phosphoric acid. Methionine played an important role on the stability of ascorbic acid. The method seemed to be applicable to the routine analysis of ascorbic acid in foods. Folic Acid.-Microbiological analysis of total folate in foods is often considered as the golden standard compared to other methods based on, for example, LC. Koontz et al. showed results of total folate concentrations measured by microbiological assay in a variety of foods. Samples were submitted in a routine manner to experienced laboratories that regularly perform folate analysis fee-for-service basis in the United States. Each laboratory reported the use of a microbiological method similar to the AOAC Official Method for the determination of folic acid. Striking was, the use of 3 different pH extraction conditions by 4 laboratories. Only one laboratory reported using a tri-enzyme extraction. Results were evaluated. Results for folic acid fortified foods had considerably lower between-laboratory variation, 9-11%, versus >45% for other foods. Mean total folate ranged from 14 to 279 microg/100 g for a mixed vegetable reference material, from 5 to 70 microg/100 g for strawberries, and from 28 to 81 microg/100 g for wholemeal flour. One should realize a large variation in results, which might be caused by slight modifications in the microbiological analysis of total folate in foods or the analysis in various (unfortified) food matrixes. Furthermore, optimal combination of enzymes and reaction conditions may vary depending on the composition of the food. Padrangi and Laborde showed recently that treatment with alpha-amylase had no significant effect on measured folate in spinach, although addition of protease significantly increased the release of folate. LC/MS applications gain increasing attention because of their specificity. Rychlik used stable isotope dilution assays for the determination of the folate content of broccoli and bread. Compared to data in the literature and food data bases, amounts were significantly lower. Pawlosky et al., however, found comparable values for 5-methyltetrahydrofolic acid and folic acid by HPLC analysis with fluorescent detection and HPLC/MS. Among samples analyzed were CRMs and broccoli. Besides folic acid, other water-soluble vitamins were also determined by LC/MS/MS by Leporati et al. The method was applied to the quantitative analysis of the natural content of vitamins in typical Italian pasta samples, as well as in fortified pasta samples produced for the U.S. market. Biotin.-A paper from Staggs et al. included the assertion that existing biotin data in food composition tables are inaccurate because the majority are based on bioassays with all relevant disadvantages. Data in most cases are overestimated with consequences for recommendations for dietary biotin intake. An HPLC/avidin-binding assay was used to analyze 87 foods to support the hypothesis mentioned.

Chemistry Techniques, Analytical↗

Molecular dynamics study of the stability of staphylococcal nuclease mutants: component analysis of the free energy difference of denaturation.

The stability of two mutants G88V (Gly-88-->Val) and A69T (Ala-69-->Thr) of staphylococcal nuclease was analyzed by molecular dynamics simulations. The calculated free energy differences of denaturation for G88V and A69T were -1.1 and -2.8 kcal/mol, respectively. These values are in good agreement with the experimental values. The free energy differences divided into electrostatic and van der Waals components were analyzed. These two mutants are mainly destabilized due to van der Waals interactions. There is little difference between the electrostatic contribution to the free energy change in the native state and that in the denatured state. In each mutant structure, a small cavity appears in the vicinity of the perturbed residue. It is suggested that intramolecular van der Waals interactions of the mutants are weaker than those of the wild-type. Furthermore, analyses of the contributions of each residue near the perturbed residue and of water to the free energy difference of denaturation suggest that the interaction between water and the perturbed residue plays a very important role in the stability of staphylococcal nuclease, and that a small hydrophobic core consisting of the three aromatic rings (Tyr-27, Phe-34, Phe-76) and the side chain of Met-32 is also important for the stability.

Alanine↗

Role of conserved proline residues in stabilizing tryptophan synthase alpha subunit: analysis by mutants with alanine or glycine.

To study the role of Pro residues in the conformation and conformational stability of a protein, nine mutant alpha subunits of tryptophan synthase from Escherichia coli, in which Ala or Gly was substituted for each of six Pro residues (positions 28, 57, 62, 96, 132, and 207) that are conserved in 10 microorganisms, were constructed by means of site-directed mutagenesis. The far-ultraviolet (UV) CD spectra of five mutant alpha subunits with Ala in place of Pro were identical to the spectrum of the wild-type protein, the exception being the mutant at position 207 (P207A). CD values in the far-UV region were less negative for P207A, indicating that the Pro residue at position 207 plays a role in maintaining the intact structure of the alpha subunit. The negative CD values of the Gly mutants examined (P28G, P96G, and P132G) were also decreased. Calorimetric measurements showed that the two mutants at position 28 (P28G and P28A) gave two peaks in the excess heat capacity curve, whereas the wild type and other Pro mutants had only a single peak. The stability of each mutant protein relative to that of the wild type was about the same for P57A, less for P62A and P132A, and markedly decreased for P96A and P207A, which are substituted at less mobile positions. The changes of denaturation entropy (delta delta dS) at the denaturation temperature of the wild-type protein (54.1 degrees C at pH 9.0) were positive for P57A, P62A, and P132A, but negative for P96A, P207A, and P132G.(ABSTRACT TRUNCATED AT 250 WORDS)

Alanine↗

PATTERNFINDER: combined analysis of DNA regulatory sequences and double-helix stability.

BACKGROUND: Regulatory regions that function in DNA replication and gene transcription contain specific sequences that bind proteins as well as less-specific sequences in which the double helix is often easy to unwind. Progress towards predicting and characterizing regulatory regions could be accelerated by computer programs that perform a combined analysis of specific sequences and DNA unwinding properties. RESULTS: Here we present PATTERNFINDER, a web server that searches DNA sequences for matches to specific or flexible patterns, and analyzes DNA helical stability. A batch mode of the program generates a tabular map of matches to multiple, different patterns. Regions flanking pattern matches can be targeted for helical stability analysis to identify sequences with a minimum free energy for DNA unwinding. As an example application, we analyzed a regulatory region of the human c-myc proto-oncogene consisting of a single-strand-specific protein binding site within a DNA region that unwindsin vivo. The predicted region of minimal helical stability overlapped both the protein binding site and the unwound DNA region identified experimentally. CONCLUSIONS: The PATTERNFINDER web server permits localization of known functional elements or landmarks in DNA sequences as well as prediction of potential new elements. Batch analysis of multiple patterns facilitates the annotation of DNA regulatory regions. Identifying specific pattern matches linked to DNA with low helical stability is useful in characterizing regulatory regions for transcription, replication and other processes and may predict functional DNA unwinding elements.PATTERNFINDER can be accessed freely at: http://wings.buffalo.edu/gsa/dna/dk/PFP/

Computational Biology↗

Characterization of the stability of recombinant protein production in the GS-NS0 expression system.

The GS-NS0 system is an important mammalian expression system used largely within industry for the high-level expression of recombinant proteins for therapeutic use. It is essential that the productivity of this system remains stable throughout culture expansion for the successful long-term production of recombinant proteins. Here we present a study of the stability of recombinant protein production from unamplified GS-NS0 cell lines over extended period of continuous culture. The cell lines used in this study were generated by the transfection of NS0 cells with DNA encoding for a secreted recombinant protein and by two subsequent rounds of limiting dilution cloning prior to analysis of stability. The stability of recombinant protein production was assessed at intervals over a period of 134 days using repeated batch culture in shake flasks. Heterogeneous stability was identified. The productivity of some clones remained consistent throughout 134 days of continuous culture. Others exhibit rapid and progressive loss of productivity. Analysis of the causal relationships underlying stability indicates that the initial transfectant determines the susceptibility to loss or retention of productivity. Selection of production clones on the basis of growth and productivity alone will not predict stability during long-term culture. Our research indicates that stable high-producing clones can readily be obtained from use of the GS-NS0 system in the absence of amplification but there may be molecular features of the original transfectants that could serve as very important predictive indicators of the stability of recombinant protein production.

Animals↗