Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Flow Injection Analysis”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68Linked to original sources
PubMed2006

Simple sequential injection analysis systems with a dynamic surface tension detector.

Simple sequential injection analysis systems with DSTD (SIA/DSTD) have been developed. One was employed for the study of the effects of the ion contents in solutions to the dynamic surface pressure of ionic surfactants. The results from the studies show the possibility for an alternative simple fast screening, but also a sensitive procedure for water quality determination. Another simple SIA/DSTD system has been demonstrated for the quantification of an anionic surfactant using a single standard calibration.

Calibration↗
PubMed2006

Cation-selective exhaustive injection and sweeping MEKC for direct analysis of methamphetamine and its metabolites in urine.

Direct analysis of methamphetamine, amphetamine, and p-hydroxymethamphetamine in urine was achieved by cation-selective exhaustive injection and sweeping micellar EKC. A bare fused-silica capillary (40 cm, 50 microm id) was filled with phosphate buffer (80 mM, pH 3, containing 20% ACN). Then a high-conductivity buffer (100 mM phosphate, pH 3; 6.9 kPa for 2.5 min) was injected. Samples were loaded using electrokinetic injection (10 kV, 600 s) which created long zones of cationic analytes. To enhance sensitivity by sweeping, the stacking step was performed using a phosphate buffer (50 mM, pH 3, containing 20% ACN and 100 mM SDS) at -20 kV before separation by MEKC. This method was capable of detecting the analytes at ppb levels. The calibration plots were linear (r(2) >or= 0.9948) over a range of 100-5000 ng/mL for methamphetamine, and 100-2000 ng/mL for amphetamine and p-hydroxymethamphetamine. The LODs (S/N = 3) were 20 ng/mL for methamphetamine, and 15 ng/mL for amphetamine and p-hydroxymethamphetamine. The method was applied to analysis of 14 urine samples of addicts and is suitable for screening suspected samples for forensic purposes. The results showed good agreement with fluorescence polarization immunoassay and GC-MS.

Amphetamine↗
PubMed2005

Efficient oxidizing agents for determination of 2,10-disubstituted phenothiazines.

2,10-Disubstituted phenothiazines are the best drugs in psychiatry. Several methods for their analysis have been reported in the literature. The official methods are based on non-aqueous titration or spectrophotometry. Various oxidizing agents have been used for the spectrophotometric determination of 2,10-disubstituted phenothiazines, e.g. Ce(SO4)2, NH4VO3, K2S208, KIO4, KIO3, KBrO3, FeCl3, NaNO2, H2O2, chloramine T, p-benzoquinone, N-bromosuccinimide. Oxidation reactions of phenothiazines were also used for their determination by flow-injection methods.

Antipsychotic Agents↗
PubMed1999

Post-column reaction detection based on fluorescence energy transfer in the far red spectral region.

Post-column reaction detection may result in enhanced analytical sensitivity and selectivity. This paper describes an on-line HPLC with post-column fluorescence energy transfer assay using biotin as a model analyte. Biotin labeled with R-phycoerythrin was used as the donor labeled ligand and streptavidin labeled with an indodicarbocyanine dye (Cy5), the acceptor labeled binder protein. The use of these labels provided a detection wavelength in the far red spectral region which is more selective for biological samples. In the on-line system, biotin was injected into the HPLC system followed by Cy5 labeled streptavidin and R-phycoerythrin labeled biotin, post-column. The mixture was incubated on-line in an open tubular reactor coil maintained at 37 degrees C. The measured response was the sensitized emission of Cy5 due to fluorescence energy transfer from R-phycoerythrin labeled biotin measured at 670 nm. Excitation was at 488 nm, which provided a large Stokes shift for reduction of scatter interference. The system was optimized with regard to the post-column reagents to obtain the minimum detectable concentration while maintaining appropriate dynamic range for the analysis of biotin. Biotin spiked in 0.01 M phosphate buffer, pH 7.4, showed a dynamic range of 304.0 pg/ml-122.20 ng/ml with a correlation coefficient of 0.993. The limit of detection for this assay was 304.0 pg/ml. The precision calculated at the blank (n = 6) was 4.14%.

Biotin↗
PubMed1989

Determination of vitamin B12 by chemiluminescence analysis.

Chemiluminescence analysis, with flow injection, is used for the determination of vitamin B12 by means of the luminol hydrogen peroxide system. The linear range is 3 orders of magnitude and the detection limits is 10 ppb. All samples were analyzed by both this method and colorimetry and some comparison between these two methods was made as well. Because of its sensitivity, it can be used as a convenient, and rapid method for clinical drug analysis.

Colorimetry↗
PubMed2006

Micellar electrokinetic capillary chromatography for fast separation and sensitive determination of melatonin and related indoleamines using end-column amperometric detection.

MEKC was used in conjunction with end-column amperometric detection (AD) at a carbon disc electrode (0.3 mm diameter) for the selective and sensitive determination of melatonin and its five related indoleamines including its precursors and metabolites in the pineal gland. The introduction of a sample stacking technique in injection and the buffer additive SDS in the buffer solution system provided the rapid and sensitive analysis. Optimal buffer conditions (10 mmol/L phosphate containing 20 mmol/L SDS, pH 7.2), detection potential (+1.0 V vs. Ag/AgCl), and electrokinetic injection 10 s with the separation voltage of 24 kV were employed to achieve the baseline separation of six pineal hormones within 15 min. The peak currents and the analyte concentrations have a good linear relationship over the range of 6.0 x 10(-8) 6.0 x 10(-5 )mol/L. The detection limits for six pineal hormones by AD are 9.7 to 41.8 nmol/L (equal to 2.0 to 9.7 ng/mL) (S/N = 3), respectively. It is proved to provide about 30- to 250-fold improvement over UV, and be comparable with the sensitive fluorescence detection, which needs pre-column derivatization. The proposed method has been applied for analysis of melatonin and related indoleamines in rat pineal glands. A very simple sample pretreatment procedure, merely involving the homogenization step in perchloric acid, was enough to achieve recoveries in the range of 71 to 127% for all the analytes in the pineal gland.

Animals↗
PubMed1993

New immunoassay technique using antibody immobilized on a membrane and a flow cuvette as reaction vessel.

Immunoenzymatic detection systems have been developed using human IgG as a model antigen. A membrane with covalently immobilized specific antibodies was placed into a specially constructed ultranarrow flow cuvette and solutions containing the antigen and antibody-peroxidase conjugate were then successively passed through the flow capillary cell. After washing, the membrane was placed into the substrate solution and the intensity of developed colour on the membrane was recorded visually or by a reflection spectrophotometer. The lower detection limit was about 5 x 10(-11) M and the overall analysis time was 10 min. Photoimmobilization was used to immobilize the antibody and thereby permitting control of the protein surface concentration on the membrane as well as the dimensions and shape of the activated region.

Flow Injection Analysis↗
PubMed2001

Existence of a tightly regulated water channel in Saccharomyces cerevisiae.

The Saccharomyces cerevisiae strain Sigma1278b possesses two putative aquaporins, Aqy1-1p and Aqy2-1p. Previous work demonstrated that Aqy1-1p functions as a water channel in Xenopus oocyte. However, no function could be attributed to Aqy2-1p in this system. Specific antibodies were used to follow the expression of Aqy1-1p and Aqy2-1p in the yeast. Aqy1-1p was never detected whatever the growth phase and culture conditions tested. In contrast, Aqy2-1p was detected only during the exponential growth phase in rich medium containing glucose. Aqy2-1p expression was repressed by hyper-osmotic culture conditions. Both immunocytochemistry and biochemical subcellular fractionation demonstrated that Aqy2-1p is located on the endoplasmic reticulum (ER) as well as on the plasma membrane. In microsomal vesicles enriched in ER, a water channel activity due to Aqy2-1p was detected by stopped-flow analysis. Our results show that the expression of aquaporins is tightly controlled. The physiological relevance of aquaporin-mediated water transport in yeast is discussed.

Aquaporins↗
PubMed2004

A new concept for isotope ratio monitoring liquid chromatography/mass spectrometry.

A new interface for the on-line coupling of a liquid chromatograph to a stable isotope ratio mass spectrometer has been developed and tested. The interface is usable for (13)C/(12)C determination of organic compounds, allowing measurement of small changes in (13)C abundance in individual analyte species. All of the carbon in each analyte is quantitatively converted into CO(2) while the analyte is still dissolved in the aqueous liquid phase. This is accomplished by an oxidizing agent such as ammonium peroxodisulfate. The CO(2) is separated from the liquid phase and transferred to the mass spectrometer. It is shown that the whole integrated process does not introduce isotope fractionation. The measured carbon isotope ratios are accurate and reproducible. The sensitivity of the complete system allows isotope ratio determination down to 400 ng of compound on-column. By-passing the high-performance liquid chromatography (HPLC) separation allows bulk isotopic analysis with substantially lower sample amounts than those required by conventional elemental analyzers. The results of the first applications to amino acids, carbohydrates, and drugs, eluted from various types of HPLC columns, are presented. The wide range of chromatographic methods enables the analysis of compounds never before amenable to isotope ratio mass spectrometry techniques and may lead to the development of many new assays.

Carbon Dioxide↗
PubMed2005

Isotope ratio monitoring of small molecules and macromolecules by liquid chromatography coupled to isotope ratio mass spectrometry.

In the field of isotope ratio mass spectrometry, the introduction of an interface allowing the connection of liquid chromatography (LC) and isotope ratio mass spectrometry (IRMS) has opened a range of new perspectives. The LC interface is based on a chemical oxidation, producing CO2 from organic molecules. While first results were obtained from the analysis of low molecular weight compounds, the application of compound-specific isotope analysis by irm-LC/MS to other molecules, in particular biomolecules, is presented here. The influence of the LC flow rate on the CO2 signal and on the observed delta13C values is demonstrated. The limits of quantification for angiotensin III and for leucine were 100 and 38 pmol, respectively, with a standard deviation of the delta13C values better than 0.4 per thousand. Also, accuracy and precision of delta13C values for elemental analyser-IRMS and flow injection analysis-IRMS (FIA-LC/MS) were compared. For compounds with molecular weights ranging from 131 to 66,390 Da, precision was better than 0.3 per thousand, and accuracy varied from 0.1 to 0.7 per thousand. In a second part of the work, a two-dimensional (2D)-LC method for the separation of 15 underivatised amino acids is demonstrated; the precision of delta13C values for several amino acids by irm-LC/MS was better than 0.3 per thousand at natural abundance. For labelled mixtures, the coefficient of variation was between 1% at 0.07 atom % excess (APE) for threonine and alanine, and around 10% at 0.03 APE for valine and phenylalanine. The application of irm-LC/MS to the determination of the isotopic enrichment of 13C-threonine in an extract of rat colon mucosa demonstrated a precision of 0.5 per thousand, or 0.001 atom %.

Amino Acids↗
PubMed1994

Kinetic evidence for ternary complex formation and allosteric interactions in chloride and stilbenedisulfonate binding to band 3.

The molecular basis for chloride and stilbenedisulfonate interaction with band 3 was investigated by measuring the kinetics of stilbenedisulfonate release from its complex with the transporter. We found that 150 mM NaCl accelerated the rate of release of DBDS (4,4'-dibenzamidostilbene-2,2'-dibenzamidostilbene-2,2'-disu lfonate) and H2DIDS (4,4'-diisothiocyanodihydrostilbene-2,2'-disulfonate) by more than 10-fold at constant ionic strength. The acceleration effect saturated as a function of chloride concentration. This is an indication of specific binding within a ternary complex involving stilbenedisulfonate, chloride, and band 3. To see if stilbenedisulfonates block an access channel to the transport site, we studied the effect of rapidly mixing DBDS-saturated resealed ghosts with chloride at constant ionic strength and osmotic pressure. Once again, we observe a large, uniform acceleration in the rate of DBDS release. These findings are not consistent with molecular models where stilbenedisulfonates are proposed to block access to a deeper transport site. We suggest that the intramonomeric stilbenedisulfonate site is not located on the chloride transport pathway but rather interacts with the transport site though heterotropic allosteric site-site interactions. On the basis of our kinetic evidence for ternary complex formation and on transport inhibition evidence in the literature showing a linear dependence of KI-app on substrate, we suggest that stilbenedisulfonates are linear mixed-type inhibitors of band 3 anion exchange, not pure competitive inhibitors as has been assumed on the basis of analysis of transport inhibition data alone.

4,4'-Diisothiocyanostilbene-2,2'-Disulfonic Acid↗
PubMed2001

Development and evaluation of a calibration gas generator for the analysis of volatile organic compounds in air based on the injection method.

The development and operational evaluation of a calibration gas generator for the analysis of volatile or ganic compounds (VOC) in air is described. Details of the construction, as well as of the evaluation of the apparatus are presented here. The performance of the test gas generator is validated both by on-line GC analysis of the calibration gas produced and by off-line analysis of adsorptive samples taken from the generated calibration gas. Both, active and passive sampling have been used, and the results demonstrate the excellent accuracy and precision of the generated test gas atmosphere: For the 11 investigated organic compounds (aromatic and halogenated compounds), the found values were in most cases within 5% of the target value with a reproducibility of better than 3% RSD (as determined by the analysis of the sampled adsorbent tubes). Custom made adsorbent tubes were used for active and passive sampling and in both cases were analysed by thermal-desorption GC. Particularly the combination of passive sampling and thermodesorption-GC analysis offers significant advantages over the commonly used active sampling on activated charcoal, followed by CS2 desorption in terms of avoidance of hazardous solvents, potential for automation and improved detection limits. Both sampling techniques are capable for monitoring VOCs at concentrations and under conditions relevant for workplace monitoring.

Adsorption↗
PubMed2003

Flow injection-capillary electrophoresis system with contactless conductivity detection and hydrostatic pressure generated flow. Application to the quantitative analysis of inorganic anions in water samples.

A simple and inexpensive flow injection-capillary electrophoresis (FI-CE) system with contactless conductivity detection (CCD) for automated quantitative analysis of chloride, nitrate, and sulfate in various water samples is demonstrated. A glass bottle containing the background electrolyte that is raised above the FI-CE interface generates a pulse-free, highly reproducible flow of the electrolyte through the FI-CE interface. The system operates at a flow rate of 300 microLmin(-1) with an injection volume of only 4 microL. The repeatability of peak areas (n = 18) was better than 0.81% RSD and the sample throughput was 90 samples per hour using the background electrolyte containing 12 mM L-histidine adjusted to pH 4.00 with acetic acid. The limits of detection were better than 125 microgL(-1) and were comparable to those obtained by conventional CE systems with CCD. Various calibration methods for FI-CE system with electrokinetic injection were tested and their suitability for the analysis of anions in real samples was evaluated.

Anions↗
PubMed2001

Determination of zinc in pharmaceutical products by use of a sequential injection analysis system.

A sequential injection analysis (SIA) system is proposed for the determination of zinc in pharmaceutical samples. The method is based on the spectrophotometric detection of zinc using xylenol orange as a colour reagent at 568 nm. The system can be used to monitor zinc at a frequency of 30 samples h(-1) with an average recovery of +/-98.5% and a relative standard deviation of less than 1%. A linear relationship between peak height and zinc concentration is obtained between 10 and 60 mg L(-1). The results obtained are in good agreement with those obtained by use of a standard method.

Flow Injection Analysis↗
PubMed2005

FIA/MS analysis of temporally ozonated benzo[a]pyrene and pyrene and their reaction products: inhibition of gap junction-mediated intercellular communication.

In this study, the polycyclic aromatic hydrocarbons, benzo[a]pyrene (BaP) and pyrene, were subjected to temporal ozonation. The products from ozonation of 5 mg l(-1) BaP and 5 mg l(-1) pyrene, for varying time intervals (0, 1, 2, 3, 4, 5, 6, 8, 10, 20, and 30 min) were tested for their effects on gap junction-mediated intercellular communication (GJIC) in Clone 9 rat liver cells. Additionally, the ozonation products were also analyzed by flow injection analysis/mass spectrometry (FIA/MS) and the results were compared with the toxicity observed in the GJIC assay. Treatment of the Clone 9 cells with 5 mg l(-1) of ozonated BaP products resulted in a decrease in GJIC that was inversely proportional to the length of ozonation. The products from 1 min of ozonation resulted in a 92% decrease in the rate of GJIC, but with >5 min ozonation, the products did not suppress GJIC. In contrast, pyrene (0.5 mg l(-1)) required >10 min of ozonation to alleviate its effects on GJIC. FIA/MS, using atmospheric pressure chemical ionization (APCI), demonstrated products with higher molecular weights (MW) than their corresponding parent compounds, BaP (MW 252) and pyrene (MW 202). Ozonation of pyrene formed significantly fewer products than BaP. More importantly, pyrene ozonation products were constant from 1 to 10 min, while BaP ozonation products seemed to vary between time intervals. With the longer ozonation times (20 and 30 min), BaP and pyrene formed similar products (m/z peaks 157, 111, and 96). The suppression of GJIC by ozonated products seemed to correlate with oxidation of the aromatic ring framework. Further oxidation (longer ozonation times) to lower MW products correlated with restoration of normal GJIC.

Animals↗
PubMed2003

Micro-assembly of functionalized particulate monolayer on C18-derivatized SiO2 surfaces.

This work describes a simple approach to immobilize functionalized colloidal microstructures onto a C(18)-coated SiO(2) substrate via specific or non-specific bio-mediated interactions. Biotinylated bovine serum albumin pre-adsorbed onto a C(18) surface was used to mediate the surface assembly of streptavidin-coated microbeads (2.8 microm), while a bare C(18) surface was used to immobilize anti-Listeria antibody-coated microbeads (2.8 microm) through hydrophobic interactions. For a C(18) surface pre-adsorbed with bovine serum albumin, hydrophobic polystyrene microbeads (0.8 microm) and positively charged dimethylamino microbeads (0.8 microm) were allowed to self-assemble onto the surface. A monolayer with high surface coverage was observed for both polystyrene and dimethylamino microbeads. The adsorption characteristics of Escherichia coli and Listeria monocytogenes on these microbead-based surfaces were studied using fluorescence microscopy. Both streptavidin microbeads pre-adsorbed with biotinylated anti-Listeria antibody and anti-Listeria antibody-coated microbeads showed specific capture of L. monocytogenes, while polystyrene and dimethylamino microbeads captured both E. coli and L. monocytogenes non-specifically. The preparation of microbead-based surfaces for the construction of microfluidic devices for separation, detection, or analysis of specific biological species is discussed.

Adsorption↗
PubMed2003

Three simultaneous dissolution profiles on a solid pharmaceutical formulation by a FIA manifold provided with a single spectrophotometric detector.

This article deals with the simultaneous determination of three dissolution profiles in the same pharmaceutical formulation. The officially proposed procedure from the pharmacopoeias is adapted to the FIA methodology to obtain the officially recommended profile or "global profile", and two "individual" profiles, corresponding to dissolution rate of two different active principles present in the formulation; both drugs have overlapped UV-vis spectra. The simultaneous determination of several profiles is based on the derivative spectra and the zero crossing mathematical procedure for the "individual" profiles of an active principle; the "global" profile of the formulation is obtained from the order zero derivative. The empirical profiles were adjusted by regression analysis using the three-parameter (Higuchi equation) plot method which was selected as the most suitable. The analytical errors when the concentration of one drug is very small or very high are also checked.

Amoxicillin↗
PubMed1998

Speciation determination of arsenic in urine by high-performance liquid chromatography-hydride generation atomic absorption spectrometry with on-line ultraviolet photooxidation.

A coupled system for arsenic speciation determination based on high-performance liquid chromatography (HPLC), on-line UV photooxidation and continuous-flow hydride generation atomic absorption spectrometry (HGAAS) was built from commercially available modules with minor modifications to the electronic interface, the software and the gas-liquid separator. The best results were obtained with strong anion-exchange columns, Hamilton PRP X-100 and Supelcosil SAX 1, and gradient elution with phosphate buffers containing KH2PO4-K2HPO4. The on-line UV photooxidation with alkaline peroxodisulfate, 4% m/v K2S2O8-1 mol l-1 NaOH, in a PTFE knotted reactor for 93 s ensures the transformation of inorganic AsIII, monomethylarsonate, dimethylarsinate, arsenobetaine, arsenocholine, trimethylarsine oxide and tetramethylarsonium ion to arsenate. About 32-36 HPLC-UV-HGAAS runs could be performed within 8 h, with limits of detection between 2 and 6 micrograms l-1 As, depending on the species. The method was applied to the analysis of spot urine samples and certified urine reference materials (CRMs). Upon storage at 4 degrees C, reconstituted CRMs are stable for at least 2 weeks with respect to both their total arsenic content and the individual species distribution.

Arsenic↗