Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Equilibrium optimization”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68Linked to original sources
PubMed1999

Use of a phosphotyrosine-antibody pair as a general detection method in homogeneous time-resolved fluorescence: application to human immunodeficiency viral protease.

A homogeneous time-resolved fluorescence (HTRF) assay has been developed for human immunodeficiency viral (HIV) protease. The assay utilizes a peptide substrate, differentially labeled on either side of the scissile bond, to bring two detection components, streptavidin-cross-linked XL665 (SA/XL665) and a europium cryptate (Eu(K))-labeled antiphosphotyrosine antibody, into proximity allowing fluorescence resonance energy transfer (FRET) to occur. Cleavage of the doubly labeled substrate by HIV protease precludes complex formation, thereby decreasing FRET, and allowing enzyme activity to be measured. Potential substrates were evaluated by HTRF with the best results being obtained using (LCB)K4AVSQNbeta-NapPIVpYA(NH2) and Eu(K)-pY20 where the peptide titrated with an EC50 of 7.7 +/- 0.3 nM under optimized detection conditions. Using these HTRF detection conditions, HIV protease cleaved the substrate in 50 mM NaOAc, 150 mM KF, 0.05% Tween 20, pH 5.5, with apparent first-order kinetics with a Km of 37.8 +/- 8.7 microM and a kcat of 0.95 +/- 0.07 s-1. Examination of the first-order rate constant versus enzyme concentration suggested a Kd of 9.4 +/- 2.7 nM for the HIV protease monomer-dimer equilibrium. The HTRF assay was also utilized to measure the inhibition of the enzyme by two known inhibitors.

Amino Acid Sequence↗
PubMed2004

Characterization of Cr ion exchange with hydrotalcite.

Experiments were performed to characterize the removal of chromium from water with uncalcined hydrotalcite, a clay mineral ion exchange media. The process was characterized as a function of pH, temperature, contact time, and both Cr and hydrotalcite concentrations. A Freundlich isotherm, used to describe adsorption equilibria, was used as a model and Freundlich constants were determined. The kinetics of the ion exchange reaction were also modeled using a pseudo-first order reaction rate. Finally, an equilibrium stage process was modeled with sequential batch separations to determine if hydrotalcite ion exchange could reduce aqueous Cr levels to below the EPA limit of 0.1mgl(-1). It was shown that the process is highly pH dependent, only yielding significant removals at pH levels between 2.0 and 2.1. While hydrotalcite concentration, Cr concentration, and time did effect the ion exchange, temperature was not found to be a factor. Under optimal conditions, maximum removals of greater than 95% were achieved. Finally, sequential batch tests performed on initial Cr solutions ranging from 5mgl(-1) to 40mgl(-1), demonstrated that the water could be purified to a level that was not statistically different than the EPA limit, thus demonstrating the applicability of hydrotalcite ion exchange.

Aluminum Hydroxide↗
PubMed2005

Enrichment of Pb(II) ions using phthalic acid functionalized XAD-16 resin as a sorbent.

A simple and reliable method has been developed using polymeric material containing phthalic acid as a chelating agent to concentrate ultratrace amounts of lead ions in aqueous solutions. After characterization by CHN, IR, and thermal studies, the static and dynamic sorption behavior of Pb(II) ions onto new synthetic resin has been investigated. The sorption has been optimized with respect to pH, shaking speed, and contact time between the two phases. Maximum sorption is achieved from solution of pH 5-8 after 10 min agitation time. The lowest concentration for quantitative recovery is 5.8 ng cm(-3) with a preconcentration factor of approximately 850. The kinetics of sorption follows the first-order rate equation with the rate constant k=0.58+/-0.04 min(-1). The variation of the equilibrium constant K(c) with temperature between 10 and 50 degrees C yields values of DeltaH, 52.4+/-1.65 kJmol(-1), DeltaS, 186+/-5.21 Jmol(-1)K(-1), and DeltaG(303K), -4.15+/-0.002 kJmol(-1). The sorption data of Pb(II) ions in the concentration range from 2.41x10(-6) to 1.44x10(-4) molL(-1) follows the Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherms at all temperatures investigated. The sorption of Pb(II) ions onto synthesized resin in the presence of common anions and cations has also been measured. The possible sorption mechanism of Pb(II) ions onto phthalic acid modified XAD-16 is also discussed. The sorption procedure is utilized to preconcentrate Pb(II) ions prior to their determination in automobile exhaust particulates by atomic absorption spectrometry using direct and standard addition methods.

Journal Article↗
PubMed2006

Photodegradation of orange I in the heterogeneous iron oxide-oxalate complex system under UVA irradiation.

To understand the photodegradation of azo dyes in natural aquatic environment, a novel photo-Fenton-like system, the heterogeneous iron oxide-oxalate complex system was set up with the existence of iron oxides and oxalate. Five iron oxides, including gamma-FeOOH, IO-250, IO-320, IO-420 and IO-520, were prepared and their adsorption capacity was investigated in the dark. The results showed that the saturated adsorption amount (gamma(max)) was ranked the order of IO-250 > IO-320 > gamma-FeOOH > IO-420 > IO-520 and the adsorption equilibrium constant (Ka) followed the order of IO-250 > IO-520 > gamma-FeOOH > IO-420 > IO-320. The effect of initial pH value, the initial concentrations of oxalate and orange I on the photodegradation of orange I were also investigated in different iron oxide-oxalate systems. The results showed that the photodegradation of orange I under UVA irradiation could be enhanced greatly in the presence of oxalate. And the optimal oxalate concentrations (C(ox)0) for gamma-FeOOH, IO-250, IO-320, IO-420 and IO-520 were 1.8, 1.6, 3.5, 3.0 and 0.8 mM, respectively. The photodegradation of orange I in the presence of optimal C(ox)0 was ranked as the order of gamma-FeOOH > IO-250 > IO-320 > IO-420 > IO-520. The optimal range of initial pH was at about 3-4. The first-order kinetic constant for the degradation of orange I decreased with the increase in the initial concentration of orange I. Furthermore, the variation of pH, the concentrations of Fe3+ and Fe2+ during the photoreaction were also strongly dependent on the C(ox)0 and iron oxides.

Azo Compounds↗
PubMed1999

Somatic embryos of daylily in space.

Poor growth and nuclear abnormalities observable in some space-grown plants have been hypothesized as due to a combination of factors such as degree of development, the specific way the plants are grown and the way they experience multiple stresses, some of which are space-specific. Data from a 132-day experiment on 'Mir' using embryogenic cell cultures of daylily (Hemerocallis) allow seemingly contradictory evidence from earlier Shuttle missions to be harmonized: a) the more developed an embryo the less likely it is to suffer catastrophic cell stress during growth, whereas the less developed it is, the greater its vulnerability; (b) the extent to which the stress becomes manifest is also dependent on the extent of pre-existing stresses imposed by suboptimal growing conditions; (c) an appropriate, albeit undesirable, 'stress match' with other non-equilibrium determinants, much like a 'tug of war', can result in genomic variations in space. It is not understood what is/are the feature(s) of the space environment that cause the various cell division perturbations but they have not yet been mimicked on earth. The stress symptoms were found only in space materials and, as predicted, they were most frequently encountered in smaller, less-developed materials grown under non-optimized conditions. It is concluded that, while any substantial deviation from 'optimum' can be a 'stress', spaceflight subjects vulnerable materials to cell division or DNA-repair stress(es) that appear distinctive, but remain elusive so far. Fastidiously-controlled growing environments must be devised to resolve the matter of direct versus indirect effects of space. On a practical level, it is predicted that adapting plant biotechnologies to space conditions will not be a casual matter. Grant Numbers: NAG21026.

Cell Division↗
PubMed2005

Ligand-receptor interactions in tethered polymer layers.

The binding of small proteins to ligands that are attached to the free ends of polymers tethered to a planar surface is studied using a molecular theory. The effects of changing the intrinsic binding equilibrium constant of the ligand-receptor pair, the polymer surface coverage, the polymer molecular weight, and the protein size are studied. The results are also compared with the case where ligands are directly attached to the surface without a polymer acting as a spacer. We found that within the biological range of binding constants the protein adsorption is enhanced by the presence of the polymer spacers. There is always an optimal surface coverage for which ligand-receptor binding is a maximum. This maximum increases as the binding energy and/or the polymer molecular weight increase. The presence of the maximum is due to the ability of the polymer-bound proteins to form a thick layer by dispersing the ligands in space to optimize binding and minimize lateral repulsions. The fraction of bound receptors is unity for a very small surface coverage of ligands. The very sharp decrease in the fraction of bound ligand-receptor pairs with surface coverage depends on the polymer spacer chain length. We found that the binding of proteins is reduced as the size of the protein increases. The orientation of the bound proteins can be manipulated by proper choice of the grafted layer conditions. At high polymer surface coverage the bound proteins are predominantly perpendicular to the surface, while at low surface coverage there is a more random distribution of orientations. To avoid nonspecific adsorption on the surface, we studied the case where the surface is covered by a mixture of a relatively high molecular weight polymer with a ligand attached to its free end and a low molecular weight polymer without ligand. These systems present a maximum in the binding of proteins, which is of the same magnitude as when only the long polymer-ligand is present. Moreover, when the total surface coverage in the mixed layers of polymers is high enough, nonspecific adsorption of the proteins on the surface is suppressed. The use of the presented theoretical results for the design of surface modifiers with tailored abilities for specific binding of proteins and optimal nonfouling capabilities is discussed.

Adsorption↗
PubMed2005

Site-site memory equation approach in study of density/pressure dependence of translational diffusion coefficient and rotational relaxation time of polar molecular solutions: acetonitrile in water, methanol in water, and methanol in acetonitrile.

We present results of the theoretical study and numerical calculation of the dynamics of molecular liquids based on the combination of the memory equation formalism and the reference interaction site model (RISM). Memory equations for the site-site intermediate scattering functions are studied in the mode-coupling approximation for the first-order memory kernels, while equilibrium properties such as site-site static structure factors are deduced from RISM. The results include the temperature-density (pressure) dependence of translational diffusion coefficients D and orientational relaxation times tau for acetonitrile in water, methanol in water, and methanol in acetonitrile--all in the limit of infinite dilution. Calculations are performed over the range of temperatures and densities employing the extended simple point charge model for water and optimized site-site potentials for acetonitrile and methanol. The theory is able to reproduce qualitatively all main features of temperature and density dependences of D and tau observed in real and computer experiments. In particular, anomalous behavior, i.e, the increase in mobility with density, is observed for D and tau of methanol in water, while acetonitrile in water and methanol in acetonitrile do not show deviations from the ordinary behavior. The variety exhibited by the different solute-solvent systems in the density dependence of the mobility is interpreted in terms of the two competing origins of friction, which interplay with each other as density increases: the collisional and dielectric frictions which, respectively, increase and decrease with increasing density.

Journal Article↗
PubMed2003

Using pyrene-labeled HIV-1 TAR to measure RNA-small molecule binding.

To quantitatively understand the binding affinity and target selectivity of small-molecule RNA interactions, it is useful to have a rapid, highly reproducible binding assay that can be readily generalized to different RNA targets. To that end, an assay has been developed and validated for measuring the binding of low-molecular weight ligands to RNA by monitoring the fluorescence of a covalently incorporated fluorophore. As a test system, the fluorescence of a pyrene-derivatized HIV-1 TAR (transactivating response element) RNA was measured upon titration with aminoglycoside antibiotics. The binding isotherms thus obtained fit well with a model for a 1:1 interaction and yield an accurate measure of the equilibrium dissociation constant. Among a series of natural aminoglycosides, the binding affinity correlates with the number of amines, supporting an electrostatic compensation model for binding. Furthermore, the ionic strength dependence confirms that much of the binding energy is electrostatic. Finally, by measuring the binding affinity in the presence of nucleic acid competitors, we confirm that although aminoglycosides show high RNA to DNA selectivity, their selectivity among different RNA targets is sub- optimal. We conclude that this newly developed assay can be generalized to measure the binding affinities and selectivities of a variety of small molecules to a specific RNA target.

Aminoglycosides↗
PubMed1983

Amitrole Absorption by Bean (Phaseolus vulgaris L. cv ;Red Kidney') Roots : Mechanism of Absorption.

The mechanism of transport of the herbicide 3-amino-1,2,4-triazole (amitrole) into Phaseolus vulgaris roots appears to be passive, as judged by the effect of temperature (Q(10) = 1.3 between 15 and 25 degrees C) and the lack of sensitivity to metabolic inhibition afforded by 2,4-dinitrophenol and NaN(3). Amitrole absorption is a linear function of external concentration over several orders of magnitude and, thus, is not facilitated by a carrier mechanism. The absorption of amitrole is sensitive to external pH, being stimulated under acid conditions. This stimulation of amitrole absorption is seen at low (</=1 millimolar) amitrole concentrations, but not at high (50 millimolar) amitrole levels. While the apparent octanol-water partition coefficient varies with the pH of the aqueous phase, there is no clear correspondence between absorption and the apparent partition coefficient. Roots do not accumulate amitrole above concentration equilibrium; however, at a time when the net amitrole content of the root tissue begins to saturate, amitrole can be detected in the xylem stream. On a fresh-weight basis, amitrole absorption by roots is equal to that accomplished by trifoliate-leaf tissue. An estimate of the permeability coefficient (according to the analysis of Tyree et al. 1979 Plant Physiol 63: 367-374) suggests that amitrole possesses near-optimal permeability for an ambimobile solute, on the order of 2.12 (+/- 0.47) x 10(-9) meters per second.

Journal Article↗
PubMedDate not supplied

[Synchronous mechanical heart massage during assisted circulation].

In tests on dogs specially devised cardiac massage appliances and a monitoring system synchronizing the mechanical massage with the R wave on the ECG were used in carrying out a synchronous mechanical chest massage in conditions of an experimentally induced incompetence of the cardiac ventricles. Optimal parameters of the hemodynamics were recorded with the massage proceeding in such a manner, when mechanical action on the cardiac ventricles coincided with termination of the maximum pressure period of the myocardium. The synchronous ancillary cardiac massage effected under conditions of ventricular incompetence was found to be attended by a rise of cardiac output and increased aortic pressure, falling tension in the auricles and normalization of the acid-base equilibrium figures. Synchronization of the massaging appliance operation with cardiac contractions is an effective method of assisted circulation in acute incompetence of the heart valves.

Animals↗
PubMed1996

Placental transfer of valproic acid after liposome encapsulation during in vitro human placenta perfusion.

Valproic acid (VPA) is an antiepileptic drug that crosses the placenta freely. Because its use in pregnancy is associated with an increased incidence of fetal malformation and toxic effects, this study was designed to check whether the placental transfer of VPA entrapped in liposomes was reduced. VPA was encapsulated in dehydrated-rehydrated liposomes prepared with equimolar concentrations of phosphatidylcholine, cholesterol and alpha-tocopherol. Liposomes were analyzed for their physicochemical characteristics, their stability and percentage of encapsulation of VPA. A system of dual perfusion of an isolated lobule of term human placenta was used. Six placentas were perfused with liposome-VPA and six with free VPA for 180 min using recirculating maternal and fetal circuits. The rate of transfer and time to reach equilibrium of VPA was similar in placentas perfused with free VPA and with liposome-encapsulated VPA. Liposomes significantly reduced VPA transplacental transfer and placental uptake. This was confirmed by FMM at equilibrium, that was 0.548 +/- 0.058 in free VPA and 0.393 +/- 0.075 in liposome-VPA. The ratio of fetal to maternal concentrations at equilibrium was 0.90 +/- 0.10 in controls and 0.66 +/- 0.13 in liposome-VPA. The amount of VPA recovered in fetal circulation and in placental tissue were 28 +/- 4 and 7 +/- 3% in controls and 19 +/- 4 and 3 +/- 2% in liposome-VPA. In conclusion, our data indicate that encapsulating VPA in liposomes significantly reduces the fetal amount and exposure, and further in vitro and in vivo investigations are needed to optimize the use of liposomes, particularly in pregnancy.

Anticonvulsants↗
PubMed1995

Optimal medical treatment under asymmetric information.

A model is developed of patient-doctor interaction under asymmetric information. It examines how both the probability of consulting and initial health status are semi-endogenously determined by a potential patient determining a threshold health level, below which he demands a consultation. It is shown that the demand elasticity with respect to socio-economic variables is lower the more severe the illness. The paper also offers a model of the supply side. A distinction is established between uncertainty and asymmetric information between the patient and the doctor. After deriving the conditions for an equilibrium of the patient-doctor interaction, payment systems for achieving medical 'adequacy' and Pareto efficiency are analysed.

Health Services Needs and Demand↗
PubMedDate not supplied

[The mathematical modelling of water-osmotic equilibrium during the performance of hemodialysis].

The model has been designed by the authors to prevent complications as a result of redistribution of liquid between cellular and extracellular spaces arising in the patient's body in the course of hemodialysis. Because movements of the liquid between the spaces depends on the osmolality gradient, two principal systems were identified: body water system and system of osmotically active substances. The latter incorporates sodium and potassium salts and urea. The model is based on 6 differential equations. The least squares method derived individual parameters of the model. Using the model, the physician can regulate to optimal the regimen of hemodialysis: blood flow rate, speed of ultrafiltration, concentration of sodium and potassium in dialysate.

Extracellular Space↗
PubMed2004

Extraction of electrolytes from aqueous solutions and their spectrophotometric determination by use of acid-base chromoionophores in lipophylic solvents.

The formation of non-absorbing complexes in an organic phase has been exploited for the spectrophotometric determination of ionic analytes in aqueous solutions. The method is based on liquid-liquid extraction of aqueous solution with lipophylic organic phases containing an acid-base chromoionophore, a neutral lypophilic ligand (neutral carrier) selective to the analyte and a cationic (or anionic) exchanger. The method avoids all difficulties of the preparation of the very thin membranes used in optodes, so that it can advantageously be used for the study of the role physical-chemical parameters of the system in order to optimize them and to prepare, if necessary, an optimized optode. Two lipophylic derivatives of Nile Blue and 4',5-dibromofluorescein have been synthesized, in order to ensure their permanence within organic phase. Two different neutral carriers previously characterized by us as ionophores for liquid-membrane Ion Selective Electrodes have been employed. Three different ionic exchangers have been tested. Furthermore, a model allowing the interpolation of experimental data and the determination of the thermodynamic constant of the ionic-exchange equilibrium has been developed and applied.

Electrolytes↗
PubMed2000

Simplified quantification of dopamine transporters in humans using [99mTc]TRODAT-1 and single-photon emission tomography.

Quantification of dopamine transporters (DAT) using [99mTc]TRODAT-1 and single-photon emission tomography (SPET) requires full kinetic modeling of the data, using complex and invasive arterial blood sampling to provide an input function to the model. We have shown previously that a simpler reference tissue model provides accurate quantitative results, using a reference region devoid of DAT as the input to the model and thereby obviating the need for blood sampling. We now extend this work into humans, and develop further simplifications to make the imaging protocol much more practical as a routine procedure. Fourteen healthy subjects (age 29.8 +/- 8.4 years, range 18.7-45.5 years) underwent dynamic SPET for 6 h following injection of 752 +/- 28 MBq [99mTc]TRODAT-1. The kinetic data were analyzed using nonlinear regression analysis (NLRA) and Logan-Patlak graphical analysis. In addition, simple average ratios of striatal-to-background counts were obtained for three 1-h periods (3-4 h, 4-5 h, 5-6 h), and compared against the kinetic models. All methods gave an index of specific binding, proportional to the binding potential, known as the distribution volume ratio (DVR). The reference tissue NLRA gave mean values of k3=0.013 +/- 0.003 min(-1), k4=0.011 +/- 0.002 min(-1), and DVR=2.29 +/- 0.17. Graphical analysis gave a value of DVR=2.28 +/- 0. 16, and the three ratio values of DVR were: 3-4 h, 2.18 +/- 0.15; 4-5 h, 2.34 +/- 0.13; and 5-6 h, 2.46 +/- 0.19. Graphical analysis was highly correlated with NLRA (R2=0.91, slope=0.90 +/- 0.08). The ratio methods correlated well with NLRA (3-4 h, R2=0.71, slope= 0.73 +/- 0.13; 4-5 h, R2=0.86, slope=0.73 +/- 0.09; 5-6 h, R2=0.80, slope=1.00 +/- 0.15), and also with graphical analysis (3-4 h, R2=0.65, slope=0.74 +/- 0.16; 4-5 h, R2=0.85, slope=0.78 +/- 0.09; 5-6 h, R2=0.88, slope=1.11 +/- 0.12). The optimum equilibrium time point for obtaining a simple ratio was approximately 4.5-5.5 h. In conclusion, the simple ratio techniques for obtaining a quantitative measure of specific binding correlated well with the reference tissue kinetic models, using both NLRA and graphical analysis. The optimum time for obtaining a ratio appeared to be in the range 4.5-5.5 h. Earlier time points, while still relatively accurate, had a lower sensitivity and may not be optimized for measuring small changes in DAT concentrations.

Adolescent↗
PubMed2002

Linear combinations of nonlinear models for predicting human-machine interface forces.

This study presents a computational framework that capitalizes on known human neuromechanical characteristics during limb movements in order to predict human-machine interactions. A parallel-distributed approach, the mixture of nonlinear models, fits the relationship between the measured kinematics and kinetics at the handle of a robot. Each element of the mixture represented the arm and its controller as a feedforward nonlinear model of inverse dynamics plus a linear approximation of musculotendonous impedance. We evaluated this approach with data from experiments where subjects held the handle of a planar manipulandum robot and attempted to make point-to-point reaching movements. We compared the performance to the more conventional approach of a constrained, nonlinear optimization of the parameters. The mixture of nonlinear models accounted for 79 +/- 11% (mean +/- SD) of the variance in measured force, and force errors were 0.73 +/- 0.20% of the maximum exerted force. Solutions were acquired in half the time with a significantly better fit. However, both approaches suffered equally from the simplifying assumptions, namely that the human neuromechanical system consisted of a feedforward controller coupled with linear impedances and a moving state equilibrium. Hence, predictability was best limited to the first half of the movement. The mixture of nonlinear models may be useful in human-machine tasks such as in telerobotics, fly-by-wire vehicles, robotic training, and rehabilitation.

Artificial Intelligence↗
PubMed2003

Structural and vibrational study of the tautomerism of histamine free-base in solution.

Infrared and Raman spectroscopy in H(2)O and D(2)O and quantum Density Functional calculations were used to determine the structure of histamine free-base in aqueous solution. A quantum mechanical study of the tautomeric equilibrium of histamine free-base in solution was performed at the 6-311G level. Electronic correlation energies were included by using the hybrid functional B3LYP. The solvent was simulated as a continuum characterized by a dielectric constant, and the quantum system (solute) was placed in an ellipsoidal cavity. Solute-solvent electrostatic interaction was calculated by means a multipolar moment expansion introduced in the Hamiltonian. Four relevant histamine conformations were optimized by allowing all the geometrical parameters to vary independently, which involved both the gauche-trans and the N3H-N1H tautomerisms. The calculated free energies predicted N3H-gauche as the most stable one of histamine free-base in solution. The order of stability is here completely altered with respect to previous results in gas phase, which presented the N1H-gauche conformer as the most stable structure. Our results also differ from previous Monte Carlo simulations, which obtained the N3H-trans conformer as the most stable in solution, although in this case, the histamine structures were kept frozen to the gas-phase geometry. Vibrational spectroscopy results support theoretical ones. Quadratic force fields for the four histamine conformers were achieved under the same calculation methodology. Previously, a general assignment of the infrared and Raman spectra of histamine free-base was proposed for solutions in both natural and heavy water. This allowed us to compare the experimental set of both wavenumbers and infrared intensities with the calculated ones. The lowest quadratic mean wavenumber deviation was obtained for the N3H-gauche conformer, in agreement with the free-energy calculations. Calculated infrared intensities were also compared to the experimental intensities, supporting this conformer as the relevant structure of histamine free-base in solution. It was then selected for a complete vibrational dynamics calculation, starting with a low-level scaling procedure to fit the set of calculated wavenumbers to the experimental values. The results were presented in terms of quadratic force constants, potential energy distribution, and normal modes.

Histamine↗
PubMed2001

Mechanistic investigations on the reaction between 1,2-dioxines and bulky stabilized phosphorus ylides: an efficient route to closely related cyclopropane stereoisomers.

The bulky stabilized ylides (2a-d) react with a range of 1,2-dioxines (1a-d) to afford the diversely functionalized cyclopropanes 7 in excellent yield and diastereomeric excess. This is in direct contrast to the situation when nonbulky ester ylides are utilized which results in a completely different cyclopropyl series. Through a combination of isolation, spectroscopic, temperature, and deuterium and additive effects studies, the mechanism of cyclopropane formation from this second pathway can be proposed. Importantly, enolate quenching of the intermediate 1-2lambda(5)-oxaphospholanes 4 prior to collapse results in an equilibrium mixture of intermediates 10 and 11 which have been fully characterized, and their formation is primarily a result of the steric bulk of the stabilized ester ylide. These intermediates (10/11) then collapse further and result in formation of the observed closely related cyclopropyl stereoisomers 7 and 8. Moreover, the addition of LiBr to these reactions allows for the control of which of the two possible cyclopropanation pathways will be dominant. Finally, optimal protocols that demonstrate the potential of this new cyclopropanation methodology for the ready construction of closely related cyclopropyl stereoisomers are presented.

Journal Article↗