Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “high throughput”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67Linked to original sources
PubMed2001

High-speed liquid chromatography/tandem mass spectrometry using a monolithic column for high-throughput bioanalysis.

With the ever-increasing workload from a variety of in vitro and in vivo screening procedures, new analytical methodologies to perform bioanalysis in an accurate and high-throughput manner are in great demand. In this work, monolithic columns were used instead of conventional particulate HPLC columns to perform chromatographic separations. Because the pressure drop on a monolithic column was considerably lower than that on a particulate column, a high flow rate (6 mL/min) was used for a 4.6 x 50 mm monolithic column with a total backpressure of about 61 bar measured using acetonitrile/water (50:50). The capability of using a regular column length at high flow rates, combined with the extremely small dependency of separation efficiency on linear flow velocity, allowed for the generation of sufficient chromatographic resolving power in a significantly reduced runtime. As demonstrated in this work, a plasma extract of a mixture of tempazepam, tamoxifen, fenfluramine, and alprozolam were baseline separated within a total analysis time of one minute. An average peak width at half maximum of approximately one second was noted using a generic broad gradient. It was also found that the separation efficiency and signal/noise (S/N) ratios for this separation remained almost constant at flow rates of 1, 3, and 6 mL/min, respectively. The ruggedness of the separation was evaluated by injecting 600 plasma extracts containing the replicates of a standard curve of the above mixture during an overnight run. The chromatographic retention time, separation quality, peak response and sensitivity were highly reproducible throughout the run. This high-speed liquid chromatography/tandem mass spectrometry (LC/MS/MS) system has been used routinely in the authors' laboratory to support drug discovery programs.

Acetonitriles↗
PubMed2003

High-throughput selected reaction monitoring liquid chromatography-mass spectrometry determination of methylphenidate and its major metabolite, ritalinic acid, in rat plasma employing monolithic columns.

This work presents a high-throughput selected reaction monitoring (SRM) LC-MS method for the determination of methylphenidate (MPH), a central nervous stimulant, and its de-esterified metabolite, ritalinic acid (RA) in rat plasma samples. A separation of these two compounds was achieved in 15 s by employing a 3.5-ml/min flow-rate, a porous monolithic column and a TurboIonSpray source compatible with relatively high flow-rates. In addition, a relatively fast autosampler and a new data acquisition system resulted in a time lag of less than 17 s between consecutive injections. Overall, 768 protein-precipitated rat plasma samples (eight 96-well plates) containing both MPH and RA were analyzed within 3 h and 45 min. The partial method validation described in this report included an assessment of linearity, intra and inter-assay precision and accuracy, and method robustness. Deuterated internal standards for the target compounds, d(3)-MPH and d(5)-RA, were employed. The calibration curves ranged from 0.1 to 50 ng/ml for MPH and from 0.5 to 50 ng/ml for RA. The limit of quantification (LOQ) for MPH and RA was 0.1 and 0.5 ng/ml, respectively. For both analytes, the intra- and inter-assay precision (relative standard deviation, % C.V.) and accuracy (relative error) did not exceed 15% for the quality control samples (QCs) QC1, QC2 or QC3 (0.3, 1.5 and 40 ng/ml for MPH and 0.15, 15 and 40 ng/ml for RA) for either analyte and did not exceed 20% at the lower limit of quantitation (LOQ) level. No carry-over from the autosampler was detected. The retention times remained constant throughout the experiment. Baseline resolution of MPH and RA was consistently observed throughout the plates analyzed. The described method demonstrates the feasibility for employing monolithic HPLC columns to effect rapid bioanalytical SRM LC-MS analysis of representative biological samples.

Animals↗
PubMed2000

High-throughput SNP detection by using DNA pooling and denaturing high performance liquid chromatography (DHPLC).

One of the critical steps in the positional cloning of a complex disease gene involves association analysis between a phenotype and a set of densely spaced diallelic markers, typically single nucleotide repeats (SNPs), covering the region of interest. However, the effort and cost of detecting sufficient numbers of SNPs across relatively large physical distances represents a significant rate-limiting step. We have explored DNA pooling, in conjunction with denaturing high performance liquid chromatography (DHPLC), as a possible strategy for augmenting the efficiency, economy, and throughput of SNP detection. DHPLC is traditionally used to detect variants in polymerase chain reaction products containing both allelic forms of a polymorphism (e.g., heterozygotes or a 1:1 mix of both alleles) via heteroduplex separation and thereby requires separate analyses of multiple individual test samples. We have adapted this technology to identify variants in pooled DNA. To evaluate the utility and sensitivity of this approach, we constructed DNA pools comprised of 20 previously genotyped individuals with a frequency representation of 0%-50% for the variant allele. Mutation detection was performed by using temperature-modulated heteroduplex formation/DHPLC and dye-terminator sequencing. Using DHPLC, we could consistently detect SNPs at lower than 5% frequency, corresponding to the detection of one variant allele in a pool of 20 alleles. In contrast, fluorescent sequencing detected variants in the same pools only if the frequency of the less common allele was at least 10%. We conclude that DNA pooling of samples for DHPLC analysis is an effective way to increase throughput efficiency of SNP detection.

Alleles↗
PubMed2004

Lead discovery of quinoxalinediones as an inhibitor of dipeptidyl peptidase-IV (DPP-IV) by high-throughput screening.

N-Ureido-quinoxalinedione derivatives have been discovered as leads for a novel series of dipeptidyl peptidase-IV (DPP-IV) inhibitors through high-throughput screening of our chemical library. A brief structure-activity relationship of the compounds was investigated. Among them, entry 5 showed the most potent inhibitory activity. The nitro group in quinoxaline moiety and the aromatic sulfonyl substituted ureido functional group seem to be important to increase the potency dramatically.

Animals↗
PubMed2002

A pH sensitive colorometric assay for the high-throughput screening of enzyme inhibitors and substrates: a case study using kinases.

We have developed an uncoupled, pH sensitive kinase assay that can be used for high-throughput screening of potential inhibitors or for determining substrate specificity. Kinases catalyze the transfer of a gamma-phosphoryl group from ATP to an appropriate hydroxyl acceptor with the release of a proton. This assay is based on the detection of this proton using an appropriately matched buffer/indicator system. The assay was used to measure the activity of four readily available kinases, including hexokinase, glucokinase, glycerokinase, and pyruvate kinase, which was run in the reverse direction. We also went on to screen a small series of mono- and diphosphonucleotides for inhibition of hexokinase as well as a modest set of potential hexokinase substrates. We determined sucrose to be a modest substrate for hexokinase with a K(m) of 1.8 +/- 0.2 mM, a k(cat) of 142 +/- 3 min(-1), and a V(max) that is 15% of that for glucose. Given the importance of kinases in a diverse array of biological functions and disease states, there is a need for a simple, rapid assay system. We feel this assay will lend itself well to meet this end. This method should be applicable to many other enzymatic reactions which involve a change in pH.

Adenosine Triphosphate↗
PubMedDate not supplied

Mining high-throughput screening data of combinatorial libraries: development of a filter to distinguish hits from nonhits.

Kohonen neural networks generate projections of large data sets defined in high-dimensional space. The resulting self-organizing maps can be used in many applications in the drug discovery process, such as to analyze combinatorial libraries for their similarity or diversity and to select descriptors for structure-activity relationships. The ability to investigate thousands of compounds in parallel also allows one to conduct a study based on single-dose experiments of high-throughput screening campaigns, which are known to have a greater uncertainty than IC50 or Ki values. This is demonstrated here for a data set of 5513 compounds from one combinatorial library. Furthermore, a method was developed that uses self-organizing maps not only as an indicator of structure-activity relationships, but as the basis of a classification system allowing predictive modeling of combinatorial libraries.

Journal Article↗
PubMed2004

Microarray-based, high-throughput gene expression profiling of microRNAs.

MicroRNAs (miRNAs) are small regulatory RNAs that serve fundamental biological roles across eukaryotic species. We describe a new method for high-throughput miRNA detection. The technique is termed the RNA-primed, array-based Klenow enzyme (RAKE) assay, because it involves on-slide application of the Klenow fragment of DNA polymerase I to extend unmodified miRNAs hybridized to immobilized DNA probes. We used RAKE to study human cell lines and brain tumors. We show that the RAKE assay is sensitive and specific for miRNAs and is ideally suited for rapid expression profiling of all known miRNAs. RAKE offers unique advantages for specificity over northern blots or other microarray-based expression profiling platforms. Furthermore, we demonstrate that miRNAs can be isolated and profiled from formalin-fixed paraffin-embedded tissue, which opens up new opportunities for analyses of small RNAs from archival human tissue. The RAKE assay is theoretically versatile and may be used for other applications, such as viral gene profiling.

Cell Line↗
PubMed2006

Automated MEMS-based Drosophila embryo injection system for high-throughput RNAi screens.

We have developed an automated system based on microelectromechanical systems (MEMS) injectors for reliable mass-injection of Drosophila embryos. Targeted applications are high-throughput RNA interference (RNAi) screens. Our injection needles are made of silicon nitride. The liquid to be injected is stored in an integrated 500 nl reservoir, and an externally applied air pressure pulse precisely controls the injected volume. A steady-state water flow rate per applied pressure of 1.2 nl s(-1) bar(-1) was measured for a needle with channel width, height and length of 6.1 microm, 2.3 microm and 350 microm, respectively. A typical volume of 60 pl per embryo can be reliably and rapidly delivered within tens of milliseconds. Theoretical predictions of flow rates match measured values within +/-10%. Embryos are attached to a glass slide surface and covered with oil. Packages with the injector chip and the embryo slide are mounted on motorized xyz-stages. Two cameras allow the user to quickly align the needle tip to alignment marks on the glass slide. Our system then automatically screens the glass slide for embryos and reliably detects and injects more than 98% of all embryos. Survival rates after deionized (DI) water injection of 80% and higher were achieved. A first RNAi experiment was successfully performed with double-stranded RNA (dsRNA) corresponding to the segment polarity gene armadillo at a concentration of 0.01 microM. Almost 80% of the injected embryos expressed an expected strong loss-of-function phenotype. Our system can replace current manual injection technologies and will support systematic identification of Drosophila gene functions.

Animals↗
PubMed2003

High-throughput optimization by statistical designs: example with rat liver slices cryopreservation.

The purpose of this study was to optimize cryopreservation conditions of rat liver slices in a high-throughput format, with focus on reproducibility. A statistical design of 32 experiments was performed and intracellular lactate dehydrogenase (LDHi) activity and antipyrine (AP) metabolism were evaluated as biomarkers. At freezing, modified University of Wisconsin solution was better than Williams'E medium, and pure dimethyl sulfoxide was better than a cryoprotectant mixture. The best cryoprotectant concentrations were 10% for LDHi and 20% for AP metabolism. Fetal calf serum could be used at 50 or 80%, and incubation of slices with the cryoprotectant could last 10 or 20 min. At thawing, 42 degrees C was better than 22 degrees C. After thawing, 1h was better than 3h of preculture. Cryopreservation increased the interslice variability of the biomarkers. After cryopreservation, LDHi and AP metabolism levels were up to 84 and 80% of fresh values. However, these high levels were not reproducibly achieved. Two factors involved in the day-to-day variability of LDHi were identified: the incubation time with the cryoprotectant and the preculture time. In conclusion, the statistical design was very efficient to quickly determine optimized conditions by simultaneously measuring the role of numerous factors. The cryopreservation procedure developed appears suitable for qualitative metabolic profiling studies.

Animals↗
PubMedDate not supplied

High-throughput evaluation of olefin copolymer composition by means of attenuated total reflection Fourier tranform infrared spectroscopy.

As a consequence of developing fully automated reactors for organic and organometallic synthesis and polymerizations combined with rapid on-line analysis, databases, and data mining, the analysis of polymers with respect to composition and properties has been speeded up. High-throughput evaluation of olefin copolymers requires fast measurements and high accuracy without tedious sample preparation such as pressing KBr pellets. This has been achieved by using attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR spectroscopy) in conjunction with multivariate calibration in order to determine the composition of olefin copolymers such as ethene/propene, ethene/1-hexene and ethene/1-octene copolymers.

Journal Article↗
PubMed2007

High-throughput sorting and analysis of human sperm with a ring-shaped laser trap.

Sperm motility is an important concept in fertility research. To this end, single spot laser tweezers have been used to quantitatively analyze the motility of individual sperm. However, this method is limited with throughput (single sperm per spot), lacks the ability of in-situ sorting based on motility and chemotaxis, requires high laser power (hundreds of milliWatts) and can not be used to dynamically monitor changes in sperm swimming behavior under the influence of a laser beam. Here, we report a continuous 3-D ring-shaped laser trap which could be used for multi-level and high-throughput (tens to hundred sperm per ring) sperm sorting based on their motility and chemotaxis. Under a laser power of only tens of milliWatts, human sperm with low to medium velocity are slowed down, stopped, or forced to change their trajectories to swim along the ring due to the optical gradient force in the radial direction. This is the first demonstration of parallel sperm sorting based on motility with optical trapping technology. In addition, by making the sperm swimming along the circumference of the ring, the effect of laser radiation, optical force and external obstacles on sperm energetics are investigated in a more gentle and quantitative way. The application of this method could be extended to motility and bio-tropism studies of other self-propelled cells, such as algae and bacteria.

Cell Separation↗
PubMed2004

The use of 3-D cultures for high-throughput screening: the multicellular spheroid model.

Over the past few years, establishment and adaptation of cell-based assays for drug development and testing has become an important topic in high-throughput screening (HTS). Most new assays are designed to rapidly detect specific cellular effects reflecting action at various targets. However, although more complex than cell-free biochemical test systems, HTS assays using monolayer or suspension cultures still reflect a highly artificial cellular environment and may thus have limited predictive value for the clinical efficacy of a compound. Today's strategies for drug discovery and development, be they hypothesis free or mechanism based, require facile, HTS-amenable test systems that mimic the human tissue environment with increasing accuracy in order to optimize preclinical and preanimal selection of the most active molecules from a large pool of potential effectors, for example, against solid tumors. Indeed, it is recognized that 3-dimensional cell culture systems better reflect the in vivo behavior of most cell types. However, these 3-D test systems have not yet been incorporated into mainstream drug development operations. This article addresses the relevance and potential of 3-D in vitro systems for drug development, with a focus on screening for novel antitumor drugs. Examples of 3-D cell models used in cancer research are given, and the advantages and limitations of these systems of intermediate complexity are discussed in comparison with both 2-D culture and in vivo models. The most commonly used 3-D cell culture systems, multicellular spheroids, are emphasized due to their advantages and potential for rapid development as HTS systems. Thus, multicellular tumor spheroids are an ideal basis for the next step in creating HTS assays, which are predictive of in vivo antitumor efficacy.

Animals↗
PubMed2002

A high-throughput, nonisotopic, competitive binding assay for kinases using nonselective inhibitor probes (ED-NSIP).

A novel competitive binding assay for protein kinase inhibitors has been developed for high-throughput screening (HTS). Unlike functional kinase assays, which are based on detection of substrate phosphorylation by the enzyme, this novel method directly measures the binding potency of compounds to the kinase ATP binding site through competition with a conjugated binding probe. The binding interaction is coupled to a signal amplification system based on complementation of beta-galactosidase enzyme fragments, a homogeneous, nonisotopic assay technology platform developed by DiscoveRx Corp. In the present study, staurosporine, a potent, nonselective kinase inhibitor, was chemically conjugated to a small fragment of beta-galactosidase (termed ED-SS). This was used as the binding probe to the kinase ATP binding pocket. The binding potencies of several inhibitors with diverse structures were assessed by displacement of ED-SS from the kinase. The assay format was specifically evaluated with GSK3alpha, an enzyme previously screened in a radioactive kinase assay (i.e., measurement of [(33)P]-gamma-ATP incorporation into the kinase peptide substrate). Under optimized assay conditions, nonconjugated staurosporine inhibited ED-SS binding in a concentration-dependent manner with an apparent potency (IC(50)) of 11 nM, which was similar to the IC(50) value determined in a radioactive assay. Furthermore, 9 kinase inhibitors with diverse structures, previously identified from chemical compound library screening, were screened using the competitive binding assay. The potencies in the binding assay were in very good agreement with those obtained previously in the isotopic functional activity assay. The binding assay was adapted for automated HTS using selected compound libraries in a 384-well microtiter plate format. The HTS assay was observed to be highly robust and reproducible (Z' factors > 0.7) with high interassay precision (R(2) > 0.96). Interference of compounds with the beta-galactosidase signal readout was negligible. In conclusion, the DiscoveRx competitive kinase binding assay, termed ED-NSIP trade mark, provides a novel method for screening kinase inhibitors. The format is homogeneous, robust, and amenable to automation. Because there is no requirement for substrate-specific antibodies, the assay is particularly applicable to Ser/Thr kinase assay, in which difficulties in identifying a suitable substrate and antibody preclude development of nonisotopic assays. Although the nonselective kinase inhibitor, staurosporine, was used here, chemically conjugating the ED fragment to other small molecule enzyme inhibitors is also feasible, suggesting that the format is generally applicable to other enzyme systems.

Adenosine Triphosphate↗
PubMed2007

An improved high-throughput liquid chromatographic/tandem mass spectrometric method for terbinafine quantification in human plasma, using automated liquid-liquid extraction based on 96-well format plates.

A fully automated high-throughput liquid chromatography/tandem mass spectrometry (LC-MS/MS) method was developed for terbinafine quantification in human plasma. The plasma samples were treated by liquid-liquid extraction (LLE) in 2.2 mL 96-deepwell plates. Terbinafine and the internal standard (IS) N-methyl-1-naphthalenemethylamine were extracted from human plasma by LLE, using a mixture of methyl t-butyl ether (MTBE)-hexane (70:30, v/v) as the organic solvent. All liquid transfer steps, including preparation of calibration standards and quality control samples, as well as the addition of the IS, were performed automatically by using robotic liquid handling workstations. After vortexing, centrifugation and freezing, the supernatant organic solvent was evaporated and reconstituted in a small volume of a reconstitution solution. Sample analysis was performed by reversed-phase LC-MS/MS, with positive ion electrospray ionization, using multiple reaction monitoring (MRM). The method had a very short sample preparation time and a chromatographic run time of 2.2 min. It was proved to have excellent sensitivity, specificity, accuracy as well as inter- and intraday precision for the quantification of terbinafine in human plasma. The calibration curve was linear for the range of concentrations 5.0-2000.0 ng/mL. The proposed method was applied to the rapid and reliable determination of terbinafine in a bioequivalence study after per os administration of 250 mg tablet formulations of terbinafine.

Automation↗
PubMed1999

A high-throughput radiometric assay for hepatitis C virus NS3 protease.

A novel radiometric in vitro assay for discovery of inhibitors of hepatitis C viral protease activity, suitable for high-throughput screening, was developed. The NS3 protein of hepatitis C virus (HCV) contains a serine protease, whose function is to process the majority of the nonstructural proteins of the viral polyprotein. The viral NS4A protein is a cofactor of NS3 protease activity in the cleavage of NS3-NS4A, NS4A-NS4B, NS4B-NS5A, and NS5A-NS5B junctions. To establish an in vitro assay system we used NS3 proteases from different HCV strains, purified from Escherichia coli and a synthetic radiolabeled peptide substrate that mimics the NS4A-NS4B junction. Upon incubation with the enzyme the substrate was separated from the radiolabeled cleavage product by addition of an ion exchange resin. The assay was performed in a microtiter plate format and offered the potential for assaying numerous samples using a laboratory robot. Taking advantage of these features, we used the assay to optimize reaction conditions by simultaneously varying different buffer components. We showed that physicochemical conditions affect NS3 protease activity in a strain-specific way. Furthermore, the sensitivity of the assay makes it suitable for detection and detailed mechanistic characterization of inhibitors with low-nanomolar affinities for the HCV serine protease.

Buffers↗
PubMed2005

Comparison of small- and large-scale expression of selected Pyrococcus furiosus genes as an aid to high-throughput protein production.

As the natural extension of the genomic sequencing projects, the goal of the various world-wide Structural Genomics projects is development of techniques for high throughput (HTP) cloning, protein overexpression, purification and structural determination, with the ultimate goal of determining all possible protein structures. Rapid (small-scale) screening of potential expression clones under different growth conditions is presumed to be possible and a viable way to increase throughput of protein expression. In order to test the utility of screening for soluble, heterologous protein expression, we have compared the production of recombinant proteins on a small scale (1 ml cultures in 96-well plates) in Escherichia coli under two growth conditions [a rich medium and a defined (minimal) medium] using an enzyme-linked immunosorbent assay (ELISA) against the affinity tag, with the amount of recombinant protein produced during the large-scale (500 ml) growth of E. coli. The large-scale expression products were examined after a single step affinity purification by visualization on SDS-PAGE gels. Of the open reading frames that were successfully expressed on the 1 ml scale as judged by immunodetection, 80% of them successfully scaled-up to 500 ml in a rich medium and 81% of them scaled-up in a defined medium. This is significantly higher than would be expected by a randomly selected expression condition and validates the use of small-scale expression as a screening tool for more efficient protein production.

Bacterial Proteins↗
PubMed2006

Label-free reading of microarray-based proteins with high throughput surface plasmon resonance imaging.

A simple method is presented discriminating proteins at a gold surface by using an emerging technology, surface plasmon resonance (SPR) imaging. As a high throughput method, the protein array of bovine serum albumin (BSA), poly-l-lysine (PL), casein and lactate dehydrogenase (LDG) was fabricated and SPR imaging enables detection from different kinds of proteins immobilized on the sensor surface. These proteins can be discriminated directly by various reflected intensity or changing the incident angular position of light. Denaturation of these immobilized proteins on SPR sensor by interacting with denaturant 6M GdnHCl solution was also performed and obvious changes in reflected intensity were occurred after denaturation. The observation of denaturation of these proteins further supported the fact that different proteins could be discriminated on protein array before denaturation. On the other hand, the procedure of denaturation provided useful information that any change of molecular structure with the progress of denaturation would result in change of SPR signal. Excellent reproducibility with a chip-to-chip for label-free discriminating various proteins was achieved.

Image Enhancement↗
PubMed2005

High-throughput screening of enzyme libraries: in vitro evolution of a beta-galactosidase by fluorescence-activated sorting of double emulsions.

We describe a completely in vitro high-throughput screening system for directed evolution of enzymes based on in vitro compartmentalization (IVC). Single genes are transcribed and translated inside the aqueous droplets of a water-in-oil emulsion. Enzyme activity generates a fluorescent product and, after conversion into a water-in-oil-in-water double emulsion, fluorescent droplets are sorted using a fluorescence-activated cell sorter (FACS). Earlier in vivo studies have demonstrated that Ebg, a protein of unknown function, can evolve to allow Escherichia coli lacking the lacZ beta-galactosidase gene to grow on lactose. Here we demonstrate that we can evolve Ebg into an enzyme with significant beta-galactosidase activity in vitro. Only two specific mutations were ever seen to provide this improvement in Ebg beta-galactosidase activity in vivo. In contrast, nearly all the improved beta-galactosidases selected in vitro resulted from different mutations.

Directed Molecular Evolution↗