Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Poly T”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67Linked to original sources
PubMed2003

Preparation and characterization of nanoaggregates of poly(ethylene oxide)-b-polymethacrylate and poly-L-lysine.

Poly(ethylene oxide)-b-polymethacrylate (PEO-b-PMA), one of the double-hydrophilic block copolymers, has proved to the form nanoaggregates with poly-L-lysine (PLS). This was confirmed by turbidimetry, zeta-potential measurements, and dynamic light scattering. The nanoaggregate formation is induced by electrostatic charge neutralization of the PMA block with PLS. The properties of the aggregates are affected by PLS concentration as well PEO-b-PMA concentration. The aggregates have potential applications in biomedical science.

Ethylene Oxide↗
PubMed2000

Acetylcholine biosensor involving entrapment of acetylcholinesterase and poly(ethylene glycol)-modified choline oxidase in a poly(vinyl alcohol) cryogel membrane.

A bienzymatic sensor for the determination of acetylcholine was prepared by physical coimmobilization of acetylcholinesterase and poly(ethylene glycol)-modified choline oxidase in a poly(vinyl alcohol) cryogel membrane obtained by a cyclic freezing-thawing process. The enzyme-modified polymer was applied on a platinum electrode to form an amperometric sensor, based on the electrochemical detection of enzymatically developed hydrogen peroxide. The analytical characteristics of this sensor, including calibration curves for choline and acetylcholine, pH, and temperature effects, and stability are described.

Journal Article↗
PubMed2001

Blends of aliphatic polyesters. VI. Lipase-catalyzed hydrolysis and visualized phase structure of biodegradable blends from poly(epsilon-caprolactone) and poly(L-lactide).

Phase-separated biodegradable polymer blends were prepared from poly(epsilon-caprolactone) (PCL) and poly(L-lactide) (PLLA), and Rhizopus arrhizus lipase-catalyzed hydrolysis and phase structure of the blend films were investigated. Gravimetry revealed that the lipase-catalyzed hydrolysis of PCL in PCL- and PLLA-rich phases is disturbed by the presence of PLLA. Polarimetry confirmed the occurrence of a predominant hydrolysis of PCL and subsequent removal of the hydrolyzed water-soluble PCL oligomers in the blend films. Gravimetry and gel permeation chromatography of the non-blended PLLA film indicated that R. arrhizus lipase has no catalytic effect on the hydrolysis of PLLA. The phase structure of the blend films could be visualized by selective enzymatic removal of one component and subsequent scanning electron microscopic observation.

Biocompatible Materials↗
PubMed1992

B-Z conformational transition and hydration of poly (dC-dG).poly (dC-dG) in fibres.

The B-Z transition of poly(dC-dG).poly(dC-dG) has been studied by fibre X-ray diffraction and measurement of fibre dimensions. The polymorphism of the Z form is well observed as a function of variations of the r.h. (relative humidity). The Z to B transition is obtained at very high r.h. values. The cooperative transition from B to Z is associated with a disorganization of the fibre. Details about the hydration of the polynucleotide during conformational transitions are presented and it is shown that a nucleotide in Z form can be associated with up to 16 water molecules and up to 22 when in the B form.

Chemical Phenomena↗
PubMedDate not supplied

Production of poly(3-hydroxybutyrate) and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by Erwinia sp. USMI-20.

A locally isolated soil microorganism identified as Erwinia sp. USMI-20 has been found to produce poly(3-hydroxybutyrate), P(3HB), from either palm oil or glucose and its copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate), P(3HB-co-3HV), from a combination of palm oil and a second carbon source of either one of the following compounds: propionic acid, n-propanol, valeric acid and n-pentanol. It was found that Erwinia sp. USMI-20 could produce P(3HB) up to 69 wt.% polymer content with a dry cell weight of 4.4 g/l from an initial amount of 14.5 g/l of glucose followed by a feeding rate of glucose at 0.48 g/h glucose. On the other hand, the bacteria can achieve 46 wt.% of P(3HB) and a dry cell weight of 3.6 g/l from a batch fermentation in a 10-l fermentor from an initial concentration of 4.6 g/l of palm oil. Further characterisation of the polymer production was also carried out by using different types of palm oil. Among the different palm oils that were used, crude palm oil was the best lipid source for P(3HB) production as compared to palm olein and palm kernel oil. In the production of the copolymer, P(3HB-co-3HV), the highest mole fraction of 3-HV units could be as high as 47 mol% from a single feeding of valeric acid upon initial growth on palm oil.

Culture Media↗
PubMed2000

Injectable biodegradable polymer composites based on poly(propylene fumarate) crosslinked with poly(ethylene glycol)-dimethacrylate.

New injectable, in situ crosslinkable biodegradable polymer composites were investigated consisting of poly(propylene fumarate) (PPF), poly(ethylene glycol)-dimethacrylate (PEG-DMA), and beta-tricalcium phosphate (beta-TCP). We examined the effects of the PEG-DMA/PPF double-bond ratio and beta-TCP content on the crosslinking characteristics of the composites including the maximum crosslinking temperature and the gel point, as well as the properties of the crosslinked composites such as the compressive strength and modulus, and the water-holding capacity. The maximum crosslinking temperature was constant averaging 39.7 degrees C for the composite formulations tested. The gel points varied from 8.0 +/- 1.0 to 12.6 +/- 2.5 min and were not affected by the relative amounts of PEG-DMA. The compressive strength at yield of PEG-DMA/PPF composites without beta-TCP increased from 5.9 +/- 1.0 to 11.2 +/- 2.2 MPa as the double-bond ratio of PEG-DMA/PPF increased from 0.38 to 1.88. An increase in compressive modulus was also observed from 30.2 +/- 3.5 to 58.4 +/- 6.2 MPa for the same range of the PEG-DMA/PPF double-bond ratio. Also, the addition of beta-TCP (33 wt%) enhanced the mechanical properties of all composites. The equilibrium water content of networks without beta-TCP increased from 21.7 +/- 0.2 to 30.6 +/- 0.2% for a double-bond ratio of PEG-DMA/PPF ranging from 0.38 to 1.88. However, the mechanical properties of the swollen composites under compression were smaller than the dry ones. These data demonstrate the feasibility of fabricating injectable biodegradable polymer composites with engineered mechanical properties for orthopedic tissue engineering.

Acrylates↗
PubMed2001

Surface coating of stearyl poly(ethylene oxide) coupling-polymer on polyurethane guiding catheters with poly(ether urethane) film-building additive for biomedical applications.

Three types of stearyl poly(ethylene oxide) (SPEO) with Mn of 2,300, 6,000 and 12,000 were synthesized; accordingly, three types of amphiphilic coupling-polymer SPEO-MDI-SPEO (MSPEO) were prepared by the reactions with 4,4'-methylene diphenyl diisocyanate (MDI). As the surface-modifying additives (SMA), MSPEOs were coated onto the outer wall of the medical guiding catheters. Due to the lack of stability, when coated, MSPEO blended with the film building agent (FBA), poly(ether urethane) (PEL). The process of coating was performed with a lifter. With invariable speed, the PU guiding catheter was vertically dipped into the coating mixture of SMA-MSPEO and FBA-PEL. The surface analysis was carried out by ATR-FTIR and contact angle measurements. It was proved that the surface enrichment of PEO on water interface was much higher than that on air interface. Three kinds of static clotting time tests, PRT, PT and TT, as well as the static platelet adhesion experiment were performed. The results indicated that the coated surface could resist the blood coagulation effectively. In order to test the blood compatibility of the coated catheters under a shear of blood flow, the dynamic experiment was performed with a closed-loop tubular system under a shear rate of 1,500 s(-1). The blood regular testing was carried out on the samples taken out at six different times (0, 5,10, 20, 30 and 60 min). The results were ideal. Finally, the SMA-MSPEO was proved to be non-acute-toxic by LD50 test.

Blood Coagulation↗
PubMed2001

Indomethacin-loaded methoxy poly(ethylene glycol)/ poly(epsilon-caprolactone) diblock copolymeric nanosphere: pharmacokinetic characteristics of indomethacin in the normal Sprague-Dawley rats.

We prepared the drug-loaded polymeric nanospheres composed of the methoxy poly(ethylene glycol) (MePEG) and poly(epsilon-caprolactone) (PCL) that showed a narrow size distribution and average diameter of less than 200 nm. We could obtain the nanosphere having a relatively high drug-loading efficiency of about 42% when the feed weight ratio of indomethacin (IMC) to polymer was 1:1. To investigate the IMC pharmacokinetics in the IMC-loaded MePEG/PCL nanosphere (DMEP70) using the rats as animal model, we analyzed the IMC concentration in plasma with HPLC after i.v. bolus administered at a dose of 10 mg/kg in free IMC (control) and IMC-loaded MePEG/PCL nanosphere (DMEP70) groups via tail vein. Pharmacokinetics parameters (mean +/- s.d.) such as the mean residence time (MRT, h), the steady-state volume of distribution (Vdss, l), the terminal half-time (t 1/2, h) and the plasma clearance (CL, l/h) of IMC in each groups (control vs. DMEP70) were determined; MRT (16.97 +/- 4.83 vs. 28.69 +/- 11.28, p < 0.01); Vdss (14.26 +/- 4.86 vs. 20.37 +/- 12.04, p < 0.05); t 1/2 (15.12 +/- 4.77 vs. 23.1 +/- 8.24, p < 0.01); CL (0.84 +/- 0.27 vs. 0.71 +/- 0.41). From these results, we could concluded that MEP70 has a significant potential for sustained release and the enhancement of circulation time of loaded drug by prolonging terminal half-life, increasing MRT and Vdss of IMC. Therefore, The MePEG/PCL block copolymeric nanosphere system is being considered as promising biodegradable and biocompatible drug carrier vehicles for parentral use and may be useful as sustained release injectable delivery systems for hydrophobic drugs.

Animals↗
PubMed2001

Preparation of poly(L-lactic acid) and poly(DL-lactic-co-glycolic acid) foams by use of ice microparticulates.

Biodegradable foams of poly(L-lactic acid) (PLLA) and poly(DL-lactic-co-glycolic acid) (PLGA) for tissue engineering were fabricated by a porogen-leaching technique using ice microparticulates as the porogen material. PLLA or PLGA solution in chloroform was mixed with ice microparticulates. The mixtures were frozen by being placed in molds in liquid nitrogen and freeze-dried to form the foams. Scanning electron microscopic observation of the PLLA and PLGA foams showed that evenly distributed and interconnected pore structures were formed in these foams. The porosity and surface area of the foams increased with an increase in the weight fraction of the ice microparticulates, while the median pore size remained unchanged. The pore structures of the foams could be manipulated by controlling processing variables such as the size and weight fraction of the ice microparticulates and polymer concentration.

Biocompatible Materials↗
PubMed2002

Poly(epsilon-caprolactone) and poly(epsilon-caprolactone)-polyvinylpyrrolidone-iodine blends as ureteral biomaterials: characterisation of mechanical and surface properties, degradation and resistance to encrustation in vitro.

This study describes the physicochemical properties and in vitro resistance to encrustation of solvent cast films composed of either poly(epsilon-caprolactone) (PCL), prepared using different ratios of high (50,000) to low (4000) (molecular weight) m.wt., or blends of PCL and the polymeric antimicrobial complex, poly(vinylpyrrolidone)-iodine (PVP-I). The incorporation of PVP-I offered antimicrobial activity to the biomaterials. Films were characterised in terms of mechanical (tensile analysis, dynamic mechanical thermal analysis) and surface properties (dynamic contact angle analysis, scanning electron microscopy), whereas degradation (at 37 degrees C in PBS at pH 7.4) was determined gravimetrically. The resistance of the films to encrustation was evaluated using an in vitro encrustation model. Reductions in the ratio of high:low-m.wt. PCL significantly reduced the ultimate tensile strength, % elongation at break and the advancing contact angle of the films. These effects were attributed to alterations in the amorphous content and the more hydrophilic nature of the films. Conversely, there were no alterations in Young's modulus, the viscoelastic properties and glass-transition temperature. Incorporation of PVP-I did not affect the mechanical or rheological properties of the films, indicative of a limited interaction between the two polymers in the solid state. Manipulation of the high:low m.wt. ratio of PCL significantly altered the degradation of the films, most notably following longer immersion periods, and resistance to encrustation. Accordingly, maximum degradation and resistance to encrustation was observed with the biomaterial composed of 40:60 high:low m.wt. ratios of PCL; however, the mechanical properties of this system were considered inappropriate for clinical application. Films composed of either 50:50 or 60:40 ratio of high:low m.wt. PCL offered an appropriate compromise between physicochemical properties and resistance to encrustation. This study has highlighted the important usefulness of degradable polymer systems as ureteral biomaterials.

Biocompatible Materials↗
PubMed2003

In vitro degradation of polymeric networks of poly(propylene fumarate) and the crosslinking macromer poly(propylene fumarate)-diacrylate.

Polymeric networks of poly(propylene fumarate) (PPF) crosslinked with poly(propylene fumarate)-diacrylate (PPF-DA) are currently being investigated as an injectable, biodegradable bone cement. This study examined the effect of crosslinking density, medium pH, and the incorporation of a beta-tricalcium phosphate (beta-TCP) filler on the in vitro degradation of PPF/PPF-DA. Cylindrical specimens were submerged in buffered saline at 37 degrees C and the change in weight, geometry, and compressive mechanical properties were monitored over a 52-week period. All formulations showed an initial increase in modulus and yield strength over the first 12 weeks, achieving maxima of 1307+/-101 and 51+/-3MPa, respectively, for the beta-TCP composite. PPF/PPF-DA networks with the lower crosslinking density demonstrated the greatest degradation with a 17% mass loss. Samples in the lower buffer pH 5.0 compared to physiological pH 7.4 did not show any differences in mass loss, but exhibited a faster decrease in the compressive strength over time. The beta-TCP composites maintained their mechanical properties at the level following their initial increase. These results show that the degradation of PPF/PPF-DA networks can be controlled by the crosslinking density, accelerated at a lower pH, and prolonged with the incorporation of the beta-TCP filler.

Acrylates↗
PubMed2003

Investigation of nanocomposites based on semi-interpenetrating network of [L-poly (epsilon-caprolactone)]/[net-poly (epsilon-caprolactone)] and hydroxyapatite nanocrystals.

In this paper the semi-interpenetrating network (semi-IPN) technique was used for the first time to prepare bone implant composites containing hydroxyapatite (HAP) nanocrystals. The prepared nanocomposites are expected to combine several property advantages including good mechanical strength, modified degradation rate and excellent osteoconductivity. The semi-IPN matrix based on the linear poly (epsilon-caprolactone) (L-PCL) and the network poly (epsilon-caprolactone) (net-PCL) structures are revealed to be phase separation structures. The morphology of net-PCL is featured by intracrosslinked microdomains (1-10 microm) that further interconnect with each other to form the network over the whole sample. The net-PCL component is totally amorphous at room temperature for the nanocomposites containing HAP up to 12.3 wt%. Further, the crystallinity of L-PCL is greatly decreased due to the presence of net-PCL as compared with that for pure L-PCL. The incorporation of L-PCL into the net-PCL network could significantly improve the mechanical properties of pure net-PCL. A great improvement in mechanical properties is observed for the nanocomposites if the HAP content is increased to 15.8 wt%. This transition is in agreement with that the net-PCL component changes from amorphous state to crystalline state at this composition.

Biocompatible Materials↗
PubMed2003

Biodegradable poly(epsilon-caprolactone)-poly(ethylene glycol) block copolymers: characterization and their use as drug carriers for a controlled delivery system.

Poly(epsilon-caprolactone)-poly(ethylene glycol) (PECL) copolymers were synthesized from polyethylene glycol (PEG) and epsilon-caprolactone (epsilon-CL) using stannous octoate as catalyst at 160 degrees C by bulk polymerization. The effect of the molecular weight of PEG and the copolymer ratio on the properties of the copolymers was investigated by (1)H-NMR, IR, DSC and GPC. PCL and PECL microspheres containing human serum albumin were elaborated by solvent extraction method based on the formation of double w/o/w emulsion. Microspheres were characterized in terms of morphology, size, loading efficiency, and the efficiency of microspheres formation. The results show that the microspheres prepared from PECL-10 and PECL-15 copolymers achieved the highest loading efficiency (about 50%) among all copolymers. These results indicate that the properties of copolymers could be tailored by adjusting polymer composition. It is suggested that these matrix polymers may be optimized as carriers in the protein (antigen) delivery system for different purposes.

Calorimetry, Differential Scanning↗
PubMed2003

Polyion complex micelles from plasmid DNA and poly(ethylene glycol)-poly(L-lysine) block copolymer as serum-tolerable polyplex system: physicochemical properties of micelles relevant to gene transfection efficiency.

Polyion complex (PIC) micelles composed of the poly(ethylene glycol)-poly(L-lysine) (PEG-PLL) block copolymer and plasmid DNA (pDNA) were investigated in this study from a physicochemical viewpoint to get insight into the structural feature of the PIC micellar vector system to show practical gene transfection efficacy particularly under serum-containing medium. The residual ratio (r) of the lysine units in PEG-PLL to the phosphate units of pDNA in the system significantly affects the size of the PIC micelles evaluated from dynamic light scattering, being decreased from approximately 120 to 80 nm with an increase in the r value for the region with r > or = 1.0. The zeta potential of the complexes slightly increased with r in the same region, yet maintained a very small absolute value and leveled off to a few mV at r approximately 2.0. These results suggest that the micelles are most likely to take the core-shell structure with dense PEG palisades surrounding the PIC core to compartmentalize the condensed pDNA. Furthermore, an increasing r value in the region of r > or = 1 induces a rearrangement of the stoichiometric complex formed at r=1.0 to the non-stoichiometric complex composed of the excess block copolymer. The association number of pDNA and the block copolymer in the micelle was estimated from the apparent micellar molecular weight determined by static light scattering measurements, indicating that a single pDNA molecule was incorporated in each of the micelles prepared from the PEG (Mw=12,000 g/mol)-PLL (polymerization degree of PLL segment: 48) (12-48) block copolymer at r=2.0. These 12-48/pDNA micelles showed a gene expression comparable to the lipofection toward cultured 293 cells, though 100 microM chloroquine was required in the transfection medium. Notably, even in the presence of serum, the PIC micelles achieved appreciable cellular association to attain a high gene expression, which is in sharp contrast with the drastic decrease in the gene expression for lipoplex system in the presence of serum. A virus-comparable size (approximately 100 nm) with a serum-tolerable property of the PIC micelles indeed suggests their promising feasibility as non-viral gene-vector systems used for clinical gene therapy.

Biocompatible Materials↗
PubMed2003

Peptide functionalized poly(L-lysine)-g-poly(ethylene glycol) on titanium: resistance to protein adsorption in full heparinized human blood plasma.

The graft copolymer poly(L-lysine)-graft-poly(ethylene glycol) (PLL-g-PEG) and its RGD- and RDG-functionalized derivatives (PLL-g-PEG/PEG-peptide) were assembled from aqueous solutions on titanium (oxide) surfaces. The polymers were characterized by NMR in order to determine quantitatively the grafting ratio, g (Lys monomer units/PEG side chains), and the fraction of the PEG side chains carrying the terminal peptide group. The titanium surfaces modified with the polymeric monomolecular adlayers were exposed to full heparinized blood plasma. The adsorbed masses were measured by in situ ellipsometry. The different PLL-g-PEG-coated surfaces showed, within the detection limit of the ellipsometric technique, no statistically significant protein adsorption during exposure to plasma for 30 min at 22 degrees C or 37 degrees C, whereas clean, uncoated titanium surfaces adsorbed approximately 350 ng/cm2 of plasma proteins. The high degree of resistance of the PEGylated surface to non-specific adsorption makes peptide-modified PLL-g-PEG a useful candidate for the surface modification of biomedical devices such as implants that are capable of eliciting specific interactions with integrin-type cell receptors even in the presence of full blood plasma. The results refer to short-term blood plasma exposure that cannot be extrapolated a priori to long-term clinical performance.

Blood Proteins↗
PubMed1997

Interactions of poly(lactic acid) and poly(lactic acid-co-ethylene oxide) nanoparticles with the plasma factors of the coagulation system.

When surfactant-stabilized biodegradable poly(lactic acid) (PLA) particles are injected into rats, the rate of clearance from blood is fast. The rate can be strongly reduced by using particles made from diblock copolymers of PLA and poly(ethylene oxide) (PLA-PEO), resulting in an increased duration of contact with the components of the coagulation system. Thus, possible adverse effects such as activation of the coagulation cascade could occur. In this paper, the interactions of surfactant-stabilized PLA and PLA-PEO nanoparticle suspensions with the plasma factors of the coagulation system are presented. PLA suspensions stabilized by sodium cholate (PLA-Ch) interact with thrombin, factor V and calcium ions. Formation of complexes and aggregates is induced by addition of calcium ions to PLA-Ch suspensions in the presence or in the absence of plasma. On the contrary, PLA-PEO suspensions are remarkably inert towards the coagulation factors and calcium ions, even when cholate is present. Steric repulsion owing to the high surface density of PEO is sufficient to avoid strong interations with the proteins and formation of aggregates between particles.

Blood Coagulation↗
PubMedDate not supplied

Slow releasing of ara-C from poly(2-hydroxyethyl methacrylate) and poly(2-hydroxyethyl methacrylate-co-N-vinyl-2-pyrrolidone) hydrogels implanted subcutaneously in the back of rats.

The release of cytarabine (ara-C) from poly(2-hydroxyethyl methacrylate) and poly(2-hydroxyethyl methacrylate-co-N-vinyl-2pyrrolidone) hydrogels cross-linked with different amounts of ethyleneglycol dimethacrylate (EGDMA) 'in vivo' has been studied. Two ara-C loaded hydrogel discs, each with 25 mg of the drug, were subcutaneously implanted in the back of male Wistar rats. Total ara-C dose was 230 mg kg(-1). Ara-C and ara-U plasmatic concentration were determined by HPLC. Periods of constant drug concentration are observed from all gels. Ara-C concentrations in the steady-state are between 19.0 +/- 2.0 and 2.2 +/- 0.8 micromol l(-1). The release time of ara-C was between 3 days from pH EMA 0.5% and 16 days from H80/VP20/E15 gels. These results are very different of that obtained when ara-C is administered by intraperitoneal injection, in this case peaks of maximum concentration (between 24 +/- 1 and 3.9 +/- 0.4 microg ml(-1)) 30 min after the injection are originated, and no drug is detected 4 h after the injection.

Animals↗
PubMed2000

Sulfobutylated poly(vinyl alcohol)-graft-poly(lactide-co-glycolide)s facilitate the preparation of small negatively charged biodegradable nanospheres.

The manufacturing conditions for small nanoparticles (NP) in the range of 100-500 nm are difficult to control. Novel biodegradable, brush-like branched polyesters with a negatively charged hydrophilic backbone, poly(2-sulfobutyl-vinyl alcohol)-g-poly(lactide-co-glycolide), facilitate their preparation by a modified solvent displacement procedure. Furthermore, the structure and the surface properties of the colloidal systems are investigated. NP were characterized by photon correlation spectroscopy (PCS), zeta-potential measurement (ZPM), particle charge detection (PCD), nuclear magnetic resonance spectroscopy (NMR) and transmission electron microscopy (TEM). Varying the manufacturing conditions NP with mean diameters of about 100 up to 500 nm and, depending on polymer composition, negatively charged surfaces were obtained. The NP visualized by TEM showed smooth surfaces. Furthermore, surface characterization and NMR studies suggested a core/corona structure of the particles. This study demonstrates that a simple solvent displacement technique can be used for the reproducible preparation of discrete NP with defined negatively charged surfaces and narrow size distributions. These NP may have potential for peroral or parenteral protein delivery systems.

Acetates↗